Hire CAD designers & engineers in Middletown, Pennsylvania

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3... Read more

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3.0 and (REX- Reverse Engineering Extension , Autodesk Inventor, Geomagic Design / Design X, AutoCAD (Mechanical), and Autodesk Fusion 360. I'm also highly skilled in the following CAD/CAM Software: MasterCam X7 to X9, Esprit, Bob cad /cam

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Renderi... Read more

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Rendering, Strain, and Flow Analysis Trained Hobbies: Music, Art, Optics, Robotics, Soccer, Video Games

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background w... Read more

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background with a powerful record of ten years active expertise in diagnostic repair, project and merchandise development, business management, and engineering strategies. Established ability to with success analyze a team’s skills and hone in on those attributes to form a cost effective workplace. Demonstrates the flexibility to quickly learn in new areas furthermore delivering new ideas to the table, has effectively showcased being a convergent thinker and a pacesetter.

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned... Read more

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned. Joining your firm will gauge where I stand. No better opportunity than this can come my way. I can showcase my talent and prove my skills here, while in turn, I can learn how this industry functions in and out. That is why you may hire me for this internship.

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester... Read more

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester University of Pennsylvania Biomedical Engineering program to adopt more 3D printers and expand their CAD softwares through my own use of such technology. Through such technological skills, I played a role in 3 additional Senior Design Projects aside from my own as a Junior and Senior with my 3D modeling and printing expertise, and improved the technical outputs of Chester High School to inspire students into STEM field careers by helping a team win 2nd place in their local science fair competition with a modular, 3D printable water filter. My background in designing biomedical devices, engineering hydroponic system attachments, assembling mechanical systems, and fine-tuning 3D printable gadgets will bring a wide perspective and various technical skills to any project.

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as... Read more

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as a CNC machinist and toolmaker Own small machine shop-specializing in prototype machining and development. i have 3 axis milling capability with a HAAS VF3 CNC machining center, I also have both CNC and manual lathe, 3-D printer, 4 axis router, 4 axis laser Diode and IR) for engraving and cutting of thin metals , TIG and MIG welding, surface grinding, and extensive experience in CNC programming, and fixture design for machining . My primary focus is prototype development, and design for manufacturing. I prefer to deign and build small mechanism and machine components.

Corinne graduated from Tyler School of Art at Temple University in Philadelphia with a B.F.A. in Ceramics and Metals/Jewelry/CADCAM including a Minor in Art History.

Corinne graduated from Tyler School of Art at Temple University in Philadelphia with a B.F.A. in Ceramics and Metals/Jewelry/CADCAM including a Minor in Art History.

Hi my name is Malki Stein, and I recently completed a rigorous program known as Design Alive, where I delved into the intricacies of interior design and AutoCAD. My primary focus throughout the progra... Read more

Hi my name is Malki Stein, and I recently completed a rigorous program known as Design Alive, where I delved into the intricacies of interior design and AutoCAD. My primary focus throughout the program was on tasks related to elevations and electrical design. One of the most notable highlights of my year-long journey was the opportunity to meticulously draw and contribute to the design of a residential space. My core strength lies in my ability to effectively communicate with clients and discern their specific needs and preferences within the realm of interior design.

Over 20 years of experience with CAD/D in various industries with a broad understanding of engineering environments. Organized professional augmented by a unique blend of excellent technical, customer... Read more

Over 20 years of experience with CAD/D in various industries with a broad understanding of engineering environments. Organized professional augmented by a unique blend of excellent technical, customer service and hands-on skills. Versed in Adobe Creative Suite: various design & graphics related tools and apps. Stratasys Certified 3D Printer Technician.

yes

yes

I own a remote drafting company that serves the US from Pittsburgh. With over 9 architects and 2 engineers, we can provide quick and affordable Project based deliverables.

I own a remote drafting company that serves the US from Pittsburgh. With over 9 architects and 2 engineers, we can provide quick and affordable Project based deliverables.

I am a CAD/CAM, Jewelry, Metalsmithing major at Tyler School of Art in Philadelphia, PA. I greatly enjoy the challenge of designing prototypes and problem solving. I have created works for nightclub s... Read more

I am a CAD/CAM, Jewelry, Metalsmithing major at Tyler School of Art in Philadelphia, PA. I greatly enjoy the challenge of designing prototypes and problem solving. I have created works for nightclub settings, kitchen ware, computer accessories, and jewelry. I hope to bring new and exciting ideas to a number of industries to ultimately improve the lives of others.

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years profes... Read more

I graduated from Penn State with a BS in Electro-Mechanical Engineering Technology in 2018. I was hired right out of college and have been working daily with Creo and Inventor for about 3 years professionally. I have some AutoCAD experience as well, but do not use daily. About 4 months into my employment I was assigned a 3.5 million dollar project, which I completed on time, under budget and with no issues. I feel confident in my ability to complete any design challenge that comes my way.

Mechanical Engineer with a B.S. in ME from Drexel University. Experience in product design, specifically in the medical device field as well as pumps and water flow devices.

Mechanical Engineer with a B.S. in ME from Drexel University. Experience in product design, specifically in the medical device field as well as pumps and water flow devices.

Hi! I’m Selah, a biomedical engineering student at George Washington University with hands-on experience in medical device design and CAD modeling. I recently interned at a medical device startup (In... Read more

Hi! I’m Selah, a biomedical engineering student at George Washington University with hands-on experience in medical device design and CAD modeling. I recently interned at a medical device startup (Intelivation Technologies), where I helped develop and iterate on early-stage prototypes. I gained exposure in 3D modeling using Creo, and I enjoy turning rough ideas into clean, manufacturable designs. My strengths include: - 3D modeling for prototyping and technical visualization - Preparing 2D manufacturing drawings (including GD&T basics) - Engineering documentation and revision updates - Strong communication, quick turnaround, and attention to detail I'm reliable, adaptable, and always eager to learn from new projects. Whether you need help sketching a concept, cleaning up a CAD file, or drafting a part for printing or machining, I'll try my best to assist!

Exhibit designer with experience designing museum exhibits, trade show, experiential and retail displays. Able to develop anything from a simple pop-up or retail shelf up to an entire science center.

Exhibit designer with experience designing museum exhibits, trade show, experiential and retail displays. Able to develop anything from a simple pop-up or retail shelf up to an entire science center.

Hi! I am a mechanical engineering student in the final year of my master's degree at the University of Pennsylvania. I have used CAD software (AutoDesk Inventor, SolidWorks, OnShape) for the past 5-6... Read more

Hi! I am a mechanical engineering student in the final year of my master's degree at the University of Pennsylvania. I have used CAD software (AutoDesk Inventor, SolidWorks, OnShape) for the past 5-6 years. Some of my projects include a functioning Sterling engine, fully modeled and manufactured, and a micro turbojet engine, of which I manufactured several components. My strength is in Design for Manufacturing.

Hello! I am an independent CAD designer based in Philadelphia. My work consists of creating scaled 3D models for jewelry and wearable objects. My most current work is drafting CAD models and drawings... Read more

Hello! I am an independent CAD designer based in Philadelphia. My work consists of creating scaled 3D models for jewelry and wearable objects. My most current work is drafting CAD models and drawings for film production.

I'm Kris, I currently a multi role engineer focusing on Laser Cutting, Structural and Sheet Metal Welding, and Product Design. Welding is second nature to me as I've spent the last 10 years perfecting... Read more

I'm Kris, I currently a multi role engineer focusing on Laser Cutting, Structural and Sheet Metal Welding, and Product Design. Welding is second nature to me as I've spent the last 10 years perfecting and refining my practical weld ability. Parallel to the time I've spent welding, I've also spent time learning CNC Laser Cutting machines. From the repair to the operation of these machines. Most currently I've been learning under the guide of a more experienced engineer - the design process. This is where I get to combine all levels of experience to design things such as structural cat walks, welding fixtures, conveyors, phosphate holding and heating tanks, and multiple protective devices in the oil and gas industry.

I enjoy everything CAD design. I've been using various programs for 15 years, and have been professionally for 5+ years. Any CAD services requiring Solidworks or AutoCAD I can provide. With enough mac... Read more

I enjoy everything CAD design. I've been using various programs for 15 years, and have been professionally for 5+ years. Any CAD services requiring Solidworks or AutoCAD I can provide. With enough machine information I can also provide CNC programming services as well using BobCAD-CAM.

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Fin... Read more

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Finding and incorporating other mechanical components from McMaster-Carr depending on project needs - Using 3D printers and slicer software - Using other illustration software such as Procreate for graphic design and infodiagrams

Being able to exceed what our clients are expecting of us is one of our main goals here at Andrews CADD LLC. We will work on this on every job no matter how big or small. We will work with you and pre... Read more

Being able to exceed what our clients are expecting of us is one of our main goals here at Andrews CADD LLC. We will work on this on every job no matter how big or small. We will work with you and prepare Plans, Floor Plans, Interior Designs, 3D Realistic-Like Renderings, etc. Co-Owner at Andrews CADD LLC, Bob Andrews has an Associates Degree in Architectural Drafting and Design and is currently an Architectural Draftsman with a Custom Casework / Millwork firm. On a daily bases Bob draws Workstations, Greeter Desks, Decorative Walls, Breakrooms, Reception Areas, etc.These drawing will make their way to the shop in preparation of fabrication. Owner Nicole Andrews is in the process of getting an Associates Degree in Interior Decorating. Once she completes her degree we will expand our areas of expertise to assist our Clients in multiple stages of their projects. We look forward to working with you and/or your team to complete your project. Thank you for your time, Nicole Andrews CEO/Chairman Andrews CADD LLC Bob Andrews COO/President Andrews CADD LLC

Hi, I'm Colin Young, a seasoned draftsman and welder with over 10 years of hands-on experience in fabrication and design. I specialize in creating detailed 2D and 3D CAD models, particularly for API 6... Read more

Hi, I'm Colin Young, a seasoned draftsman and welder with over 10 years of hands-on experience in fabrication and design. I specialize in creating detailed 2D and 3D CAD models, particularly for API 650 storage tanks, steel structures, and custom aluminum projects. My extensive fabrication background gives me a practical understanding of manufacturable designs that meet both client and industry standards. Currently, I work as a Draftsman/Engineer in the above-ground storage tank industry and am pursuing a Bachelor of Science in Mechanical Engineering Technology. My work combines technical expertise with real-world fabrication experience to deliver high-quality results for every project.

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conver... Read more

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conversion, battery power, and audio. I have designed, built, and shipped multiple successful, high and low volume products for retail, industrial, and research markets.

I am a freelance mechanical engineer with a passion for innovation and bringing sketches and ideas to tangible products. I specialize in Solidworks with 6+ years of experience

I am a freelance mechanical engineer with a passion for innovation and bringing sketches and ideas to tangible products. I specialize in Solidworks with 6+ years of experience