Hire Local CAD Designers near Humble, Texas

Architectural Engineering graduate from the University of Texas at Arlington with4 years of experience with CAD and drafting design.

Architectural Engineering graduate from the University of Texas at Arlington with4 years of experience with CAD and drafting design.

I am a Certified Professional Building Designer with 7 years of hands on Architectural Design and Drafting experience. I am highly proficient in using Sketchup Pro and Layout, as well as AutoCAD to... Read more

I am a Certified Professional Building Designer with 7 years of hands on Architectural Design and Drafting experience. I am highly proficient in using Sketchup Pro and Layout, as well as AutoCAD to produce construction and design documents. My experience pertains to producing design drawings for residential and light commercial projects, and for all phases including Conceptual Design, Schematic Design, Design Development, and Construction Documents. I maintain my title as Certified Professional Building Designer with the National Council of Building Designer Certification, Which requires at least 6 years of Drafting Experience to qualify to take the exam. Upon successfully passing the exam it then requires 8 credit hours of continuous education per year to maintain certified status.

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept design... Read more

Originally from New Orleans, LA. I have a Bachelors of Science in electrical engineering with Over 4 Years of Electrical Control Systems Engineering experience. From hardware & software concept designs and installation, start-up, acceptance testing, and electrical safety Panel modifications and upgrades. Specialties: - Controls Engineering - Machine Safeguarding Electrical & Hard Guarding - Arc Flash Safety PPE Requirements - Power/Control Panel Design - Engineering Administration - Panel/Control System Upgrades - AutoCAD Electrical (2011-2013) - PLC Programming (Allen Bradley Micro, 500, Studio 5000) - Microsoft Office (Word, PowerPoint, Excel) - SCADA HMI Design (Wonderware, Panelview, C-More) - Wireless, Broadband network communication - Industrial Low Voltage Grounding and Short-circuit Protection - Arc Flash Panel Assessments (Easy Power) - Design Electrical Safety Controls - Interpret Electrical Single Line Drawings - Mange Small Capital Projects (< 150K) - Working Knowledge of NEC, NFPA 70E and NFPA 79 - Machine Guarding Team Leader - Root Cause Problem Solving - Supply Chain Management

10 years of CAD drafting experience.

10 years of CAD drafting experience.

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and con... Read more

Hi there! I'm OP Designs, a product designer with 3 years of CAD experience in AutoCAD, Fusion 360, and Inventor. I specialize in unique jewelry designs (necklaces/medallions, bracelets, etc.) and consumer products (water bottles, utensils, etc.). I take design and product requests, and will do my absolute best to ensure the client's needs are met! I look forward to working with you!

With a background in Interior Design and sales, I have transitioned into pool and backyard design. I offer pool industry Sales & Design Team assistance and work overload, real estate concept and vis... Read more

With a background in Interior Design and sales, I have transitioned into pool and backyard design. I offer pool industry Sales & Design Team assistance and work overload, real estate concept and visualization services, personal backyard oasis design, etc. Great option for pool builders who don't offer the 3D renderings and videos potential clients want to see before they buy. I utilize your submitted ideas, photos, hand sketches, survey, real estate listing, GIS location, etc. to create 2D construction drawings, 3D animation renderings, photo renderings, video renderings, etc.

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing... Read more

Mechanical engineer with four (4) years of experience in piping systems design&engineering for projects on oil&gas, water treatment industries and fire protection facilities. Capable of developing 3D models, isometrics, orthographic drawing of piping systems based on the field survey, process and equipment information and technical specifications provided by the customer.

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

Graduated with Bachelor's degree in Computer Science. 8 years of experience providing drafting/design services for electric utilities.

3d Artist Seasoned 3dartist who works on many levels of production. Specialties: I have 20 years of experience in creating a variety of art for multiple industries. 3D Modeling, Texturing, Lighti... Read more

3d Artist Seasoned 3dartist who works on many levels of production. Specialties: I have 20 years of experience in creating a variety of art for multiple industries. 3D Modeling, Texturing, Lighting, Compositing (Scene Assembly), Video Game Level Assembly, World Building, and Lighting. Software includes but not limited to 3D Studio MAX, Maya, Modo, Photoshop, ZBrush.

Deep Dive Overview: https://youtu.be/yUeb2elAZnQ?si=QuhkYvPjjsO3FFd0 3D Solid Works/ Chief Architect/ Mechanical Drawings 3D Re-model service Reverse Engineering Drawings Drawings from Sketches Draw... Read more

Deep Dive Overview: https://youtu.be/yUeb2elAZnQ?si=QuhkYvPjjsO3FFd0 3D Solid Works/ Chief Architect/ Mechanical Drawings 3D Re-model service Reverse Engineering Drawings Drawings from Sketches Drawing Revisions Panoramic views

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japa... Read more

Grew up in Northern California. My father was a mechanical engineer and prolific inventor who taught me about innovation in his fully equipped workshop in a converted horse stable. I went to Japan when I turned 18, on invitation by Kobun Chino Otogawa to participate in an informal cultural exchange. Lived and worked with Kanjuro Shibata, bow-maker to the emperor, and Zen archery master in Kyoto for about 2 years. Instead of returning to the US as planned, I continued across fascinating Asia for 1 year and then studied and worked in Paris, France for 7 years as a fine artist. Then I returned to California, built on to a cabin and added a studio. Started an art and design studio and contract design service for manufacturers and suppliers to big box retailers for about 10 years. Then I moved to Austin, Texas and worked for Philips Lighting as head designer, (senior manager, R+D) for 11 years, and led a design team. My designs won a number of innovation and design awards and were on the cutting edge of LED lighting, as well as extremely market-successful. In 2017, decided to become an independent designer again, as well as an investor, (instead of moving to Boston to continue my rewarding corporate career with Philips). Since then I have been trading futures and options, and taking on design projects, as well as advising my wife with her startup business. I'll write a book about it when I turn 80 ;-)

Specializing in Chief Architect for residential floor plans and 3D models. Four years hands-on experience plus professional work as a design assistant. Proficient with Chief Architect and Home Designe... Read more

Specializing in Chief Architect for residential floor plans and 3D models. Four years hands-on experience plus professional work as a design assistant. Proficient with Chief Architect and Home Designer Pro. Ready to deliver clean, accurate plans.

Architectural Designer (B.Arch) with experience in BIM, schematic design, and project documentation. I’ve contributed to residential and commercial projects. I’m detail-oriented, reliable, and committ... Read more

Architectural Designer (B.Arch) with experience in BIM, schematic design, and project documentation. I’ve contributed to residential and commercial projects. I’m detail-oriented, reliable, and committed to producing clean, professional work that supports strong design outcomes.

AutoCAD, REVIT, SketchUp, and Photoshop enthusiast, wide experience in architectural presentations, development of construction packages, architectural design and proposal of interior spaces. One of m... Read more

AutoCAD, REVIT, SketchUp, and Photoshop enthusiast, wide experience in architectural presentations, development of construction packages, architectural design and proposal of interior spaces. One of my passions is product design, so with me you a have an all in one, well-skilled freelancer.

A student looking for job opportunities to expand their skills and help you accomplish your desires. Proficient in Autodesk Inventor, Fusion 360, and Onshape.

A student looking for job opportunities to expand their skills and help you accomplish your desires. Proficient in Autodesk Inventor, Fusion 360, and Onshape.

I consider myself to be an inventor. My passion is making ideas into tangible reality. The concept of inventing can stem from both physical objects to developing better people teams. I have worked wit... Read more

I consider myself to be an inventor. My passion is making ideas into tangible reality. The concept of inventing can stem from both physical objects to developing better people teams. I have worked with 17 teams, being either the leader or teammate. Projects - Worked on a total of 16 robots in FTC robotics - Created multiple hyper-realistic CAD models of our robots, modeling textures, deformities, tolerances, appearances, materials, realistically moving in real-time, and dimensionally accurate to 0.001in - Instrumental team member in creating a successful 120lb, 4ft tall robot for FRC. - Designed a swerve drive, the most advanced drivetrain - Created three 150-page engineering notebooks of highly advanced technical documentation - Ran 21 studies of generative design, the world’s leading CAD technology - Created 87 animations and technical drawings showing how to build my teams’ robots and designs - Built an advanced robot with a fully rotatable scissor lift, extendable arm, and claw, and capable of driving - Created a robotic hand that models a human hand in real-time - Currently mentoring 10 high school robotics teams - Currently mentoring a Science Bowl team

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored prod... Read more

I am a design engineer with experience in designing products and tooling for both low- and high-volume manufacturing. Whether you need to reverse-engineer a broken component, model your on-shored product, model and render a new product or concept, produce RFQ-ready technical drawings with full GD&T, or develop quality, easy-to-use tooling/jigs/fixtures for your manufacturing line, I can do it! I am a Certified SolidWorks Professional and an expert in Fusion360 - licenses for both of which I own. In particular, I excel at building parametric, equation-driven models and design tables at the part, sub-assembly, and top-level assembly levels. I am also experienced at parametrically linking Solidworks drawings for automatic information updates. My manufacturing experience includes injection molding, thermoforming, extrusion, acoustic felt, sheet metal, steel/concrete pipe, additive manufacturing, 3-axis CNC, and product assembly. I've reverse-engineered, designed, and revised hundreds of custom products and tools. I have worked the production floor myself, so I know what to look for and ask about when designing for production. I can build small- to mid-size mechanical prototypes, such as a small prototype refrigerator that I designed and built in the second half of 2022. I have the ability to produce parts via FFF printing. I can also assist you in locating quality vendors for tooling and production. Certifications: Certified Solidworks Professional in Mechanical Design (CSWP-MD) C-8SKX4GBT3R Certified Solidworks Professional Advanced - Sheet Metal (CSWPA-SM) C-F67ZHEX3WR Certified Solidworks Professional Advanced - Drawing Tools (CSWPA-DT) C-UA37YPGQKM Solidworks PDM Professional, by GoEngineer.

Hello, my name is Andy Zuniga, founder of AZ Design Solutions. I specialize in industrial CAD design services using SolidWorks for manufacturing, automation, and fabrication applications. My experien... Read more

Hello, my name is Andy Zuniga, founder of AZ Design Solutions. I specialize in industrial CAD design services using SolidWorks for manufacturing, automation, and fabrication applications. My experience includes custom mounting bracket design, control panel layouts, backplate hole placement drawings, fabrication-ready dimensioned drawings, aluminum safety guard structures, and mechanical assemblies for real-world industrial environments. I focus on creating practical, organized, and build-ready solutions that simplify fabrication, installation, and field modifications while maintaining clean technical documentation and accurate dimensions. Deliverables may include SolidWorks files, STEP files, PDF drawings, assembly layouts, and fabrication-ready documentation depending on project requirements. I am committed to clear communication, attention to detail, and producing reliable industrial CAD solutions tailored to each project.

I love to create and build from the idea to the physical product. Having the knowledge on how the components are to be made allows for reduced waste and quick prototypes to be returned to your hand!

I love to create and build from the idea to the physical product. Having the knowledge on how the components are to be made allows for reduced waste and quick prototypes to be returned to your hand!

Design’N’Buy is a top-notch web-to-print solution provider and has years of experience in designing and delivering web2print solutions. There are more than 500+ print businesses using our Web-to-Print... Read more

Design’N’Buy is a top-notch web-to-print solution provider and has years of experience in designing and delivering web2print solutions. There are more than 500+ print businesses using our Web-to-Print Solutions for their online growth. With the vision of Enabling Print Business on the Web it has been able to successfully create customized solutions for the printing industries. With clients in more than 40+ countries, our clients are from top 10 countries of Unites States, UK, Netherlands, Germany, Australia, Switzerland, France, Canada, Denmark, and Brazil. 80% of USA clients belong to 4 major states of California, New York, Florida, and Texas.

Hello My name is Michael Smathers. I am a CAD expert. I have knowledge of softwares in Inventor, Revit, AutoCAD, Google Sketchup, and Mudbox. I have a bachelors in design and development and an assoc... Read more

Hello My name is Michael Smathers. I am a CAD expert. I have knowledge of softwares in Inventor, Revit, AutoCAD, Google Sketchup, and Mudbox. I have a bachelors in design and development and an associates in CAD. Feel free to message me.

I'm a hardworking, creative, and mechanically inclined individual with a great work ethic and outstanding time management. Experienced in a broad range of industries to include the Automotive, Aviatio... Read more

I'm a hardworking, creative, and mechanically inclined individual with a great work ethic and outstanding time management. Experienced in a broad range of industries to include the Automotive, Aviation, Electrical Contracting, Healthcare, and the Security industry. Authorized to work in the US for any employer with a Private Security Clearance.

I’m an architect with a strong background in residential and commercial design, technical drafting, and 3D visualization. I specialize in turning ideas into buildable and inspiring spaces, combining c... Read more

I’m an architect with a strong background in residential and commercial design, technical drafting, and 3D visualization. I specialize in turning ideas into buildable and inspiring spaces, combining creativity with precision. From 2022 to 2025, I’ve led and contributed to diverse projects including bar renovations, cultural centers, event venues, and handcrafted concrete design. I’m fast, reliable, and passionate about architecture that connects with its context and users.

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plan... Read more

I am a Structural Engineer (professional engineer PE seal in Texas). I have experience in structural analysis and design of different type of structures and I can provide a full set of structural plans to architects and homeowners for permit and construction. I can provide a very economical design that save money and reduce construction time for the following type of structures:- post tension slabs piers foundations Wood framing and Steel framing Roofing Wind Bracing systems Also I can do observation on the foundation and the structural framing and provide letter to the city as required.

I have a solid foundation in Mechanical Engineering, over five years of professional experience in the Oil &amp; Gas industry, and a proven track record in 3D modeling, I am confident in my ability to... Read more

I have a solid foundation in Mechanical Engineering, over five years of professional experience in the Oil &amp; Gas industry, and a proven track record in 3D modeling, I am confident in my ability to contribute effectively to your team. I began my design career in 2013 and have since completed over 500 projects, ranging from robots and mechanical parts to architectural designs. My career started in graphic design, where I developed technical plans and 3D models for both architectural and engineering projects. My expertise in CAD/CAM software, including SolidWorks and AutoCAD, has been essential in ensuring the precision and visual quality of complex representations. While at Numare LDTA, I successfully delivered over 250 projects, mastering tools such as SketchUp, rendering software, and the Microsoft Office suite. Thank you for considering my application. I look forward to the opportunity to contribute to your projects. https://cults3d.com/en/users/Gaisa3D/3d-models

Seekah has been studying with the Art Institute as an Interior Designer since 2014 and grew up in a construction background. Her intuitive design concepts are sure to please the eye and give you the c... Read more

Seekah has been studying with the Art Institute as an Interior Designer since 2014 and grew up in a construction background. Her intuitive design concepts are sure to please the eye and give you the comfortable environment you've been seeking.

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a... Read more

I am a mechanical engineer experienced in designing automated machinery, tool and fixtures, and 3D printed components. Whether you need assistance with reverse engineering, a simple part design, or a complex fixture, I am here to help! - Proficient in Solidworks and Creo Parametric - Full project management from start to finish - Regular communication is critical for success