Hire freelance Part Design designers near Istanbul, IB

www,celalettintoprak,com I design real products that get manufactured - not just 3D models. Manufacturing-ready CAD, prototyping, and Design for Manufacturing (DFM)-driven product development for ind... Read more

www,celalettintoprak,com I design real products that get manufactured - not just 3D models. Manufacturing-ready CAD, prototyping, and Design for Manufacturing (DFM)-driven product development for industrial and consumer products. I’m an Engineer and Industrial Product Designer focused on manufacturing-driven product development. My background spans automotive, industrial, and consumer products, where I’ve worked as a Product Developer, Designer, and Technical Lead in production-oriented environments. I don’t approach projects as isolated design tasks. I approach them as systems that must survive prototyping, manufacturing, assembly, cost pressure, and real-world use. 📐 What You Can Expect Working With Me: - Clear, structured CAD suitable for iteration and production - Design decisions informed by manufacturing reality - Practical communication with engineers, suppliers, and manufacturers - Honest feasibility feedback (go / no-go when needed) - Designs meant to be tested, not just rendered 📐 Core Capabilities: - 3D CAD modeling (Siemens NX) - 2D technical drawings (AutoCAD Professional) - CNC, laser cutting, and sheet metal preparation - Injection molding–ready part design - Fixture, bracket, and assembly design - BOM creation and production planning support - Reverse engineering and scan-based modeling 📐 Injection Mold & Manufacturing Experience I have hands-on experience designing plastic injection molds and mold-ready parts, including projects for automotive and food-related products. ⚙️ I’m familiar with: - Injection molding–ready design, Core / cavity logic - Draft angles & wall thickness optimization - Parting lines and shut-off surfaces - Shrinkage and material behavior - Gate concepts (hot runner, valve gate) - Collaboration with mold makers and CNC shops - Design for Assembly (DFA), production validation - Engineering-driven product development - Long-term product roadmap support My focus is always on tool longevity, cycle time, surface quality, and cost efficiency. 📏 Typical Projects I Work On: - Automotive accessories and aftermarket products - Mechanically complex plastic or metal parts - Prototyping-heavy product development - Production validation before tooling - Redesigns for cost reduction or manufacturability - CAD clean-up and production conversion 📌 Primary CAD Tool: Siemens NX, AutoCAD and Geomagic Design X I work primarily in Siemens NX, which is widely used in high-end automotive and industrial manufacturing. I can deliver clean, fully editable STEP / STL / Parasolid files, and I regularly convert and work with SolidWorks, Fusion 360, Rhino, SketchUp, and scan-based data. If you use SolidWorks or another CAD system, this is not a limitation — deliverables are always production-ready and compatible. 📌 If you need more than a modeler—someone who understands how products are actually built and scaled—I can support your project from concept to production readiness.

I am a CAD Designer and Manufacturing Specialist with hands-on experience in mechanical design, precision tooling, CNC machining, sheet metal processing, and furniture manufacturing. My background com... Read more

I am a CAD Designer and Manufacturing Specialist with hands-on experience in mechanical design, precision tooling, CNC machining, sheet metal processing, and furniture manufacturing. My background combines CAD design with practical manufacturing experience. I have designed high-precision thermoforming molds with tolerances down to ±0.005 mm and have experience working with aluminum, stainless steel, and steel components. I also have experience with 3-axis and 5-axis CNC machining, wire EDM, laser cutting, and sheet metal manufacturing, including preparing and working with production data and machine commands for laser-cut and sheet-metal parts. I work with SolidWorks, AutoCAD, Metalix, BiSolid and SketchUp, with additional experience in Alphacam and Cabinet Vision. I can support clients with: • 3D CAD modeling and mechanical part design • 2D technical and manufacturing drawings • High-precision mold and tooling design • Thermoforming mold design • CNC-ready component design • Sheet metal part design and production drawings • Laser-cut part preparation • Aluminum, stainless steel and steel component design • Design for Manufacturing (DFM) • Mechanical components and assemblies • Converting sketches, PDFs and existing drawings into CAD models • Furniture and cabinet design • Design revisions and manufacturing optimization My main advantage is my manufacturing background. I approach CAD projects not only from a design perspective, but also with consideration for machining strategy, tolerances, material selection, manufacturability, and production efficiency.

Highly experience in total 25 years Part Designer, Surface Modeler, Concept sketch and Concept design developer Since 2005 Plastic, Sheet Metal, Aluminium, Zamak, Concrete, Materials Part Design S... Read more

Highly experience in total 25 years Part Designer, Surface Modeler, Concept sketch and Concept design developer Since 2005 Plastic, Sheet Metal, Aluminium, Zamak, Concrete, Materials Part Design Solid and Surface modelling Sheet Metal Part Design Automotive Clay Model making

Experienced CAD design engineer specializing in custom solutions. 6 years of experience with strong technical knowledge plastic-metal part designs,machine constructions for private clients

Experienced CAD design engineer specializing in custom solutions. 6 years of experience with strong technical knowledge plastic-metal part designs,machine constructions for private clients

Machine desing Mechanical part desing Assembly 2D to 3D, paper to 3D etc. conversation PLC programming EPlan desing

Machine desing Mechanical part desing Assembly 2D to 3D, paper to 3D etc. conversation PLC programming EPlan desing

Combining my experience in the production field with my technical background, I specialized in CNC operations, CAD/CAM-supported manufacturing, and reverse engineering. I currently work at ORSA Design... Read more

Combining my experience in the production field with my technical background, I specialized in CNC operations, CAD/CAM-supported manufacturing, and reverse engineering. I currently work at ORSA Design and Engineering Technologies Inc., where I focus on the digitalization of industrial products and their integration into production processes. At ORSA, I gained extensive field experience in 3D scanning, CAD modeling, reverse engineering, and production-ready part design. The solutions we develop are tailored to meet high-precision and engineering requirements in the defense, automotive, foundry, and general manufacturing sectors. 🔧 Areas of Expertise: * CNC machining processes * CAD/CAM software (NX, SolidWorks, Geomagic Design X, Geomagic Wrap) * Reverse engineering and 3D scanning * Technical drawing and tolerance analysis * Production planning & process development Integrating new technologies into the production field, improving quality, and developing efficiency-focused solutions are my greatest motivation. I continue to create added value through the projects we undertake at ORSA. 📩 I am always open to communication for collaborations on advanced manufacturing technologies, reverse engineering projects or production processes.

I received a technical school education since my high school years. I received training in 2D (AutoCad) part design and 3D (SolidWorks) solid modeling and worked in this direction. I worked on CNC mac... Read more

I received a technical school education since my high school years. I received training in 2D (AutoCad) part design and 3D (SolidWorks) solid modeling and worked in this direction. I worked on CNC machine tools, CNC milling and lathes, (Mastercam) program, and manual, that is, hand tools. I worked on work piece programming and part production with machining methods. I also did a lot of work on Technical Drawing, that is, hand drawing techniques, and gained a lot of experience. I also worked on sheet metal and metal molding and volume molding.

Hello, I am a Mechanical Design Engineer with over 8 years of experience in construction design for electrical home appliances. I hold a degree in Industrial Design Engineering from Varna Technical U... Read more

Hello, I am a Mechanical Design Engineer with over 8 years of experience in construction design for electrical home appliances. I hold a degree in Industrial Design Engineering from Varna Technical University. I specialize in plastic part design, injection molding, and design for manufacturing (DFM). I have strong hands-on expertise in engineering plastics, 3D prototyping, and CNC machining processes. I work at an advanced level with Siemens NX, delivering production-ready, optimized, and manufacturable designs. Throughout my career, I have been responsible for full-cycle product development — from concept design to tooling support and mass production readiness. I focus on functionality, cost-efficiency, and long-term product reliability. I would be happy to contribute my expertise to your project and deliver high-quality, manufacturing-ready solutions. Best regards, Serhan