Hire Mechanical Engineer Designers in Russia

I design full-cycle mechanical engineering equipment: from concept and 3D modeling to the production of design documentation. I perform engineering calculations and mathematical modeling: —Strength;... Read more

I design full-cycle mechanical engineering equipment: from concept and 3D modeling to the production of design documentation. I perform engineering calculations and mathematical modeling: —Strength; —Solid particle dynamics; —Gas dynamics; —Heat engineering. I take into account the requirements of manufacturability, reliability, and ease of use. I develop both individual components and complete assembly units that are ready for production.

I am innovative and wide experienced mechanical engineer with over six years of experience in successful implementing of projects from idea to perfectly working equipment. My work includes design and... Read more

I am innovative and wide experienced mechanical engineer with over six years of experience in successful implementing of projects from idea to perfectly working equipment. My work includes design and construction of mechanical equipment in particular furniture and technology related products for workplaces, fire resistant constructions and milk industry equipment. I also have a successful experience in improvement of productive efficiency by finding new solutions in manufacturing. 12/2009 – 04/2011 Mechanical engineer «Ronix» | Kirov, Russia | http://www.roniks.info - Individually developed and designed tanks and vessels for milk industry (curd vat, chill tanks, storage tanks for milk and vat pasteurizer) as well as service equipment (tables, vat and stairs) which used in day-to-day operations of milk factories over whole territory of Russian Federation and Kazakhstan; - Increased sales of equipment due to introduction of innovative technologies as well as development of high-quality technical assignment; - Reduced schedule terms for equipment production due to introduction of new operations and production methods; - Reduced schedule terms for putting into operation of equipment due to high quality of developed manuals and instructions for installation and operation of equipment; - Attracted new clients due to developed and designed new types of cooling and heating jackets as well as mixers for tank and vessels. 04/2011 – 03/2012 Mechanical Engineer «SET - Fire-resistant» | Saint Petersburg, Russia - Individually developed and designed fire-resistant curtains with the application of new technical solutions; - Improved technical characteristics of fire-resistant curtains that already developed in company due to creation of new mechanisms and units and introduction of new types of fireproof fabric coatings; - Increased sales of fire-resistance curtains due to application of innovative technologies and fireproof fabrics in the production of fire-resistant curtains; - Reduced threefold term for installation of fire-resistance curtains due to the high quality of developed manuals and instructions as well as introduction of innovative elements in constructional design of fire-resistant curtains; - Successfully conducted negotiations with Chinese partners in regard to conclusion of contract on supply of fireproof fabrics on the most favorable terms; - Successfully provided consultations for clients in regard to application of fire-resistance constructions in completed and designed buildings. 04/2012 – Present Lead Mechanical Engineer “Fire-resistant constructions” | Saint Petersburg, Russia | http://npoppk.ru - Created a new division in company for construction of fire-resistant equipment from the ground up; - Offered innovative solutions for clients in fire safety on various kinds of facilities including educational facilities, hospitals, shopping malls, stores, office buildings, public eating facilities etc.; - Individually developed and successfully put into operation fire-resistant constructions (curtains, windows, doors and gates); - Arranged manufacturing process in company from the ground up; - Individually developed, designed and successfully put into operation unique fire resistant curtains with closed curve forms and mobile fire resistant shield for inflammable repairs for major oil company in Russia; - Extended sales territory across all regions of Russia and Kazakhstan; - Successfully conducted negotiations with Chinese and German partners in regard to supply of fireproof fabric and components for fire-resistant constructions at the price that twice less than primary offered price; - Successfully conducted modernization and optimization of manufacturing process in conditions of financial crisis; - Implemented new types of fireproof fabric coatings that allow to increase service life of fire-resistant curtains; - Engaged new clients due to production of unique fire-resistant constructions that know no equals among equipment produced by competitors in its price and quality; - Successfully removed and fixed defects of fire-resistant constructions produced and set up by competitors under request of clients; - Individually developed and designed technologically new types of fire-resistant gates that have never been applied in Russia (currently the work is in progress). 02/2012 – Present Remote Mechanical Engineer “AFC Industries, inc.” | NY, USA | http://www.afcindustries.com - Designed furniture and technology related products for workplace (mobile racks and carts, ergotiers); - Successfully conducted optimization of developing process for engineering department; - Prepared briefs for customers; - Prepared manuals and instructions.

I am a mechanical engineer and CAD/CAM, modelling and rendering expert who has full experiences in mechanical and architectural engineering. I graduated from Moscow University with first place in 201... Read more

I am a mechanical engineer and CAD/CAM, modelling and rendering expert who has full experiences in mechanical and architectural engineering. I graduated from Moscow University with first place in 2014. After graduation, I am working as a mechanical and architectural design engineer.

I have more than 2 years of experience in CAD/CAM. I`ve prepared more than 100 drafts by which metal parts were made. I`m also familiar with calculations and formulas linked with mechanical engineerin... Read more

I have more than 2 years of experience in CAD/CAM. I`ve prepared more than 100 drafts by which metal parts were made. I`m also familiar with calculations and formulas linked with mechanical engineering field. During my education in the leading technical universities in Russia I`ve done several experiments on machine tools diagnostics which I`ve compared with the ones I`ve done in CAE. I`m always going deep in each project in order to fully understand all the demands and requirements to get job done in time and without mistakes.

Hi, I am a Design & Production "Mechanical" Engineer,I’ve been working as a CAD/CAM/CAE Expert since 2015. I have a master’s degree in Designing and Production of machines. Now, I am studying master i... Read more

Hi, I am a Design & Production "Mechanical" Engineer,I’ve been working as a CAD/CAM/CAE Expert since 2015. I have a master’s degree in Designing and Production of machines. Now, I am studying master in Robotics and Computer vision. I Work With Autodesk Fusion360,Inventor,Solidworks,Ansys,Catia For Designing 3D models , Render,Test,Analyze the Product and Implement Mathematical Models to help understanding the Designing and Construction with MatLab and Python. I’ve worked in three major industrial companies, Made a lot of Projects Such as Robots, CNC machines, and industrial equipment. For example, I have designed mechanical models and implementation stages of production for many Pressing, Molding, Forming, Fixtures & Jaw, Lathes, Drillers, and Milling Machines. I participated in the design of these machines from the draft and tested them on analysis programs (such as ANSYS, Autodesk Nastran, ABAQUS, COMSOL, and many other applications), and conducted many experiments and tests to know the changes that would occur to the design such as (stress analysis, vibration analysis, etc.) And the use of Matlab and Python to applying all possible analysis methods even to the most complex combinations and mechanisms.

I am a mechanical engineer and a supporter of 3D printing. My field of activity is the engineering drawings, 3D models for printing, CAD documents, short-run production. I can apply the latest technol... Read more

I am a mechanical engineer and a supporter of 3D printing. My field of activity is the engineering drawings, 3D models for printing, CAD documents, short-run production. I can apply the latest technology to create your product. I use Solidvorks and some plugins.

I am a mechanical engineer specializing in manufacturing-ready CAD design, with hands-on experience in sheet metal parts, welded structures, mechanical enclosures, and prototyping. I have worked in a... Read more

I am a mechanical engineer specializing in manufacturing-ready CAD design, with hands-on experience in sheet metal parts, welded structures, mechanical enclosures, and prototyping. I have worked in an industrial company designing metal constructions and enclosures for large LED displays, where my responsibilities included sheet metal design, welded assemblies, casting considerations, reverse engineering, and preparation of manufacturing and assembly documentation. Currently, I work in a robotics company, focusing on prototyping, sheet metal components, and functional 3D-printed parts.

Experienced mechanical engineer with specialization in Oil&Gas industry, skilled in Autocad and SolidWorks with emphasis on drafting. Proven industry experience in design engineering, manufacturing, p... Read more

Experienced mechanical engineer with specialization in Oil&Gas industry, skilled in Autocad and SolidWorks with emphasis on drafting. Proven industry experience in design engineering, manufacturing, procurement and project management along with continuious work in CAD software.

I have a bachelor's degree in mechanical engineering and a master's degree in microcontroller programming. I devoted a lot of time to modeling aircraft components. Spatial thinking is well developed.... Read more

I have a bachelor's degree in mechanical engineering and a master's degree in microcontroller programming. I devoted a lot of time to modeling aircraft components. Spatial thinking is well developed. Now I am a practicing pneumatic engineer, which means that I work with my hands in matters of assembly and repair.

I have over 10 years experience in mechanical engineering and product design. I had finished so many 3d printing, laser cutting, enclosure, product design projects. I can also provide you all technica... Read more

I have over 10 years experience in mechanical engineering and product design. I had finished so many 3d printing, laser cutting, enclosure, product design projects. I can also provide you all technical drawings for the specific product. Recently I had worked as a CAD designer in Bat-Motorsports about 3 years.

mechanical engineering/design, product design I use SOLIDWORKs, AutoCAD, SKETCH UP, SOLID Edge, Revit, 3Ds Max, Rhino. Some of furniture and Jewelry design. 3D modeling and rendering. Architectural d... Read more

mechanical engineering/design, product design I use SOLIDWORKs, AutoCAD, SKETCH UP, SOLID Edge, Revit, 3Ds Max, Rhino. Some of furniture and Jewelry design. 3D modeling and rendering. Architectural design and modeling.