Hire CAD Design Designers near Piemonte, Italy

Mechanical CAD Designer with more than 4 years of experience in the steel fabrication industry and 6 months in the blow-molding plastics industry. Proficiency with the use of PTC Creo, Onshape, Solidw... Read more

Mechanical CAD Designer with more than 4 years of experience in the steel fabrication industry and 6 months in the blow-molding plastics industry. Proficiency with the use of PTC Creo, Onshape, Solidworks (CSWP) and AutoCAD for design, build, and assembly. Professional, creative, analytical, and highly versatile.

I've recently graduated in Aerospace Engineering with a First Class. I have a particular passion for Solidworks, which I've used frequently during my degree in various project. To prove my knowledge a... Read more

I've recently graduated in Aerospace Engineering with a First Class. I have a particular passion for Solidworks, which I've used frequently during my degree in various project. To prove my knowledge and competence with Solidworks I've recently completed the CSWA, the certification for Mechanical Design using Solidworks at the level of Associate.

I have a degree in Aerospace Engineering from the Polytechnic University of Turin, Italy. I have experience in CAD design and FEM structural analysis both as a designer and teacher.

I have a degree in Aerospace Engineering from the Polytechnic University of Turin, Italy. I have experience in CAD design and FEM structural analysis both as a designer and teacher.

I'm a mechanical engineer who has been working for Fiat Chrysler Automobile for 4 years. In FCA I'm a structural analysis engineer for the powertrain department. I have a deep knowledge of the cyl... Read more

I'm a mechanical engineer who has been working for Fiat Chrysler Automobile for 4 years. In FCA I'm a structural analysis engineer for the powertrain department. I have a deep knowledge of the cylinder head and cylinder block thermostructural analysis using FEM (finite element method) software like Abaqus, Hyperworks and FEMFAT for the LCF and HCF fatigue. In this years I'have increased my casting process knowledge, collaborating with foundry and simulating the residual stress field of different cylinder heads during the water quenching phase with Procast software. FEM Software skills: Abaqus (expert level) Hyperworks (expert level) FEMFAT (expert level) Procast (expert level) Optistruct (expert level for topological optimization) Simulia Isight (expert level for shape optimization) CAD Software skills: Siemens NX (basic level) General Software skills: Excel (expert level) Powerpoint (expert level)

Experienced Design Engineer with a demonstrated history of working in the fast-paced Design Industry. Knowledgeable Designer with extensive modeling and prototyping skills. Responsibly delivered more... Read more

Experienced Design Engineer with a demonstrated history of working in the fast-paced Design Industry. Knowledgeable Designer with extensive modeling and prototyping skills. Responsibly delivered more than 20 clients projects from different verticals with extensive quality and modularity.

Driven 3D modeller with 4.5 years of experience; excellent aesthetic sensibility and creative conceptualization. Comprehensive knowledge of CAS and CAD, and aptitude for learning things quickly. I ear... Read more

Driven 3D modeller with 4.5 years of experience; excellent aesthetic sensibility and creative conceptualization. Comprehensive knowledge of CAS and CAD, and aptitude for learning things quickly. I earned my Master's degree in transportation design from IAAD in Italy, and I currently work as a Junior digital modeler, creating models in Autodesk Alias that are on time and of the highest calibre. Teamwork makes the dream work.

I am an expert in developing 2D drawings and 3D visualizer. Excellent communication skills to keep in touch with clients, making sure that the project designs match their needs. I'm a serious person,... Read more

I am an expert in developing 2D drawings and 3D visualizer. Excellent communication skills to keep in touch with clients, making sure that the project designs match their needs. I'm a serious person, I like to do things well, I respect my deadline and I like to have a good collaboration and a satisfied client.

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direc... Read more

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direct reduction plants, slurry transportation, cryogenic piping, etc.) and oil & gas projects (refineries, oil fields). Developed competences in most important piping codes (including ASME B31.1, ASME B31.3, EN-13480, etc.), and acquired proficiency in all aspects of static and dynamic pipe stress analyses (seismic, PSV transients, water hammer, harmonic vibrations, high-frequency vibrations, etc.) including generating critical line list, preliminary route studies and equipment arrangements, building load cases to satisfy code requirements, support design and analysis and fatigue assessments. In-depth knowledge of piping layout design using 3D software. In addition to pipe stress analysis and piping design, which is the primary field of expertise, during the work at the University of Belgrade (as PhD candidate), developed skills in pressure vessel analysis (ASME VIII-1, ASME VIII-2 and EN-13445), process equipment sizing, process design and optimization, heat and mass transfer calculations, fluid flow calculations (steady state and transient, including interaction with the stress analysis), CFD calculations, programming as well as advanced measurement and research techniques which has all proven extremely valuable in the practice. First author and co-author of several engineering and scientific research papers.

Arch018 was founded in 2011. Since then we have specialized in describing unbuilt architecture, spaces and concepts for design competitions through images and animation.

Arch018 was founded in 2011. Since then we have specialized in describing unbuilt architecture, spaces and concepts for design competitions through images and animation.

I am a Mechanical Designer, i work mainly with Autodesk Inventor. I am very passionate for designing, producing and assembling systems and components. I have a broad experience in Mechanical desig... Read more

I am a Mechanical Designer, i work mainly with Autodesk Inventor. I am very passionate for designing, producing and assembling systems and components. I have a broad experience in Mechanical design, I did my Masters degree at the Polytechnic of Turin, Italy, and my bachelors at PUC,Chile. I am very proactive and I consider myself a hard worker. I always try to do my best and meet the deadlines.

Mathematics and realization some external details for the scooter project "ECOCAR" - LIGHT for the Korean market. -Study feasibility and cross mathematics, mathematical development and design of detai... Read more

Mathematics and realization some external details for the scooter project "ECOCAR" - LIGHT for the Korean market. -Study feasibility and cross mathematics, mathematical development and design of details and overalls of the "IRAN SAIPA 132" bridge components. -Autovaz 2190 "feasibility and mathematical bumper math. - Mathematical development of project components "AUTOVAZ 2190", - Feasibility study, mathematical aesthetic door, storage compartment and relative drawer handle and mathematical development of project components "AUTOVAZ 2190" for Russia project "AUTOVAZ 2190" and 2D - feasibility study airbag mathematization of bridge components "IRAN SAIPA 211" -Study feasibility and design project door panels "IRAN SAIPA 211" .2D (DRAWING) assembly of 3D. - Feasibility study, aesthetic door math, storage compartment and relative drawer handle mathematical development of dashboard components and related subsequent modifications for the project "IRAN SAPCO P405" -2D dashboard (all components) + exploded dashboard + tunnel + bumper + head impacto "IRAN SAPCO P405" direct contact with customer. -2D dashboard (all components) + exploded plank + tunnel + trunk part + door panels (all components) + exploded door panels. -Study feasibility mathematics electric bike for the "TURKISH" + assembly all pieces + 2D. -The helicopter feasibility for China. -Fitnessability / electric bike for Trucchia. -Study mechanical table. Project: alpha romeo QV & Base 9520. (Ug 9 & iman) Project: 164 Ferrari. (Catia v5)

-Bechelor degree in mechanical engineering -5 years experience in industrial machine automation -specialized in thermodynamics analysis and high speed production process -3D cad modeling with Autodes... Read more

-Bechelor degree in mechanical engineering -5 years experience in industrial machine automation -specialized in thermodynamics analysis and high speed production process -3D cad modeling with Autodesk Inventor

http://www.linkedin.com/pub/carlo-filippo-ratti/81/56/a26 As you can see from my Linkedin profile, I spent part of my life designing for big companies, I've managed all the project aspects, from th... Read more

http://www.linkedin.com/pub/carlo-filippo-ratti/81/56/a26 As you can see from my Linkedin profile, I spent part of my life designing for big companies, I've managed all the project aspects, from the sketching to the industrialisation. I'm particularly expert in mechanism design with many international patents as inventor. Now, I'm the owner of a design studio named EXE3D, our services aim to be efficient, cost effective and professional. If you are interested for a quotation please contact me, I will respond as soon as possible.