Hire Machining Designers in India

I am KP Harisankar (B.Tech Mechanical Production Engineering). Completed my degree during the academic year 2014-15 from Sree Chitra Thirunal College of Engineering affiliated under Kerala Universit... Read more

I am KP Harisankar (B.Tech Mechanical Production Engineering). Completed my degree during the academic year 2014-15 from Sree Chitra Thirunal College of Engineering affiliated under Kerala University (INDIA). I completed a master certificate course on computer aided tool engineering (MCTE) from Central Institute of Tool Design (CITD), Hyderabad, India. PROJECTS COMPLETED 1) BTech Project - Modification of Al-Si alloys using modifiers such as Strontium to improve its mechanical properties.Performed the project at CSIR-NIIST (National Institute of Interdisciplinary Science and Technology)Thiruvananthapuram. 2) MCTE Project - Design and manufacturing of Gas stove regulator. Pro-E creo parametric 3.0 was used for modeling the product.The Die was manufactured using conventional machining method and performed Plasting Injection Moulding to produce the final product.Polypropylene was used as the raw material for injection. 3) Modeled a project funded by Micro Small and Medium Enterprises (MSME) at CITD using Catia V5. The project is in manufacturing stage and will be released in the market within few months. 4) I am working on my project to prevent Helmet theft. CAD models are prepared.

🎯 Manufacturing-Ready CAD Engineer & Prototyping | Parametric 3D Modeling, Scan-to-CAD | Jewellery CAD I am a mechanical CAD engineer with 4+ years of hands-on experience delivering manufacturing-r... Read more

🎯 Manufacturing-Ready CAD Engineer & Prototyping | Parametric 3D Modeling, Scan-to-CAD | Jewellery CAD I am a mechanical CAD engineer with 4+ years of hands-on experience delivering manufacturing-ready, fully parametric 3D models for real-world production; not just visuals. My work focuses on accuracy, clean feature logic, and downstream manufacturability, ensuring your CAD files can be confidently used for 3D printing, CNC machining, sheet-metal fabrication, or injection molding. My work spans industrial products, concept models, 3D printable designs, and jewellery CAD for manufacturing and visualization. What I help clients with: • Parametric part & assembly modeling • Prototype iteration (print → test → revise) • Scan-to-CAD / STL-to-editable conversion • Fixing or rebuilding poor / non-manufacturable CAD • Jewellery CAD Design • Ultra-realistic Rendering & Visualization I often work with startups, product designers, and manufacturers who need CAD that reduces prototyping risk and avoids costly manufacturing errors. How I work • Clear scope and realistic timelines • Clean, editable feature trees (no locked or messy geometry) • Manufacturing-aware modeling from day one • Small paid test or first part available to validate fit I prefer long-term collaboration, but I am equally comfortable starting with a single part or quick diagnostic task. If you need CAD that is accurate, reliable, and safe to manufacture, I can help.

As a Mechanical Engineer with 5 years of robust experience in new product development, I specialize in taking projects from initial design through to prototype and final production. My career has allo... Read more

As a Mechanical Engineer with 5 years of robust experience in new product development, I specialize in taking projects from initial design through to prototype and final production. My career has allowed me to work with pioneering companies in the renewable energy and sustainable technology sectors, including Livaah Innovations, Aktivolt Celtek Pvt Ltd, Emobi Manufactury Pvt Ltd, Thermodyne Systems, and Genesis Marine Technologies. At Livaah Innovations, I was instrumental in developing and promoting products aimed at renewable energy and sustainability, including power banks, chargers, UPS systems, and portable energy storage solutions. I continued to excel within the same group of companies, contributing to significant projects at Aktivolt Celtek and Emobi Manufactury. My notable projects included a 5kW inverter, advanced energy storage systems, motor controllers, EV chargers, and electric two-wheelers. My tenure at Thermodyne Systems focused on portable consumer electronics, where I further honed my skills in diverse manufacturing processes such as sheet metal fabrication, surface design, injection molding, die casting, and CNC machining. These experiences enriched my understanding and expertise in creating efficient, high-quality products. Currently, at Genesis Marine Technologies, I lead the engineering design of the world's first hybrid surf boat. This role has given me the opportunity to manage various projects, lead cross-functional teams, and ensure the timely delivery of innovative designs while maintaining cost efficiency. My leadership and project management skills have been key in driving projects from concept to completion. I am certified in Catia and Ansys by KKMSoft, which has equipped me with advanced capabilities in design and simulation. My proficiency in prototyping includes hands-on experience with 3D printing, vacuum casting, and other cutting-edge prototyping methods. Additionally, I have extensive experience in creating detailed product manuals, engaging packaging designs, instructional animations, product renderings, and graphic design. One of my strengths is my ability to work effectively across different time zones, facilitating smooth collaboration with global teams. I am passionate about being at the forefront of today's technological advancements and contributing to the development of future-forward products. My commitment to sustainability and renewable energy drives my dedication to delivering innovative engineering solutions that meet the highest standards of quality and efficiency.

Computer Aided Engineering (CAE) Service Provider Works on CAD, FEA, CFD, MBD, machining & more. Constantly exploring all mechanical engineering tools. Vast industrial experience serving industries li... Read more

Computer Aided Engineering (CAE) Service Provider Works on CAD, FEA, CFD, MBD, machining & more. Constantly exploring all mechanical engineering tools. Vast industrial experience serving industries like Coal India, Aduza automation, Schlumberger(SLB), Dg Takano Japan, IISc Banglore, IIT Dhanbad and National Taiwan University etc. Message for any collaboration✨

I’m a Design Engineer in Mechanical field, I shall work fluent with software’s like Auto cad, Solid works. My ability is positive thoughts with creative ideas in scientific, technology, for developmen... Read more

I’m a Design Engineer in Mechanical field, I shall work fluent with software’s like Auto cad, Solid works. My ability is positive thoughts with creative ideas in scientific, technology, for development. Enthusiastic learner in engineering, and also I’m eager to meet challenges in work. I have ability to priorities and deal effectively with number of tasks simultaneously. I always focus on planning, organizing, quality, accuracy, time management, cost and development in work. I have good experience in adaptive design, developmental design, and new design. My designs are based on these methods 1) Rational design, 2) Empirical design, 3) Industrial design I m also have good experience in machinery field as operator in Center lathe, Milling machine, CNC turning center, Vertical Machining center, Wire EDM, Arc welding, and also have knowledge in sheet metal works, fabrication works, Dies, mold, Fixtures and jigs, Special purpose machinery etc.

I am Tushar, founder and creative head at TechScru. At TechScru,we have a team with cumulative experience of over 50 years, from companies like Hyundai, BMW, Mercedes, Whirlpool, Microsoft etc, you... Read more

I am Tushar, founder and creative head at TechScru. At TechScru,we have a team with cumulative experience of over 50 years, from companies like Hyundai, BMW, Mercedes, Whirlpool, Microsoft etc, you can be sure that your project is in good hands. Our expertise lies in process driven product development approach. We can help you with: • Product Research and Strategy We aim to strategize your product in a manner such that it provides a competitive edge in market and makes the brand a pioneer in the industry. TechScru understands the need of research and values it as the most important factor in product development. Our research is coupled with user centric approach which includes the usage of a product in a system including user, task, environment and the market • Product Design Based on our product strategy, our designers integrate form and function with other factors to make a product market ready. The factors include cost-efficiency, manufacturability and post sales usage. TechScru’s far sighted, user centric design methodology designs a product including all these factors to upgrade end to end user experience. • Prototyping With the skilled engineers at TechScru and industry collaboration, we provide rapid prototyping services to ensure no-delay in the development and keep all the things on Time Track. The protoyping includes the machining process to modern techniques like 3D printing and Scanning. • Integrated Engineering Engineering drives the product development lifecycle. At TechSCru, the engineering team consists if multi-disciplinary engineers, innovators, designers and entrepreneurs which include mechanical, electrical, electronics, IOT and firmware, so we provide one stop 360˚ solution for all your product engineering needs • Production Sourcing TechScru has deep connection in the industry and ensures to find the most suitable source for manufacturing. Work begins with finding and realizing production needs for the product and creating an action plan for the same. Hit the hire button, and let's get the ball rolling

I'm a motivated mechanical engineer . My Internship in CNC machining from Lovely Professional University has made me a proficient CNC programmer. I've explored mechanical device challenges in a capsto... Read more

I'm a motivated mechanical engineer . My Internship in CNC machining from Lovely Professional University has made me a proficient CNC programmer. I've explored mechanical device challenges in a capstone project about cryocooler's.I'm CATIA V5R20 ,Autocad 2D and 3D,certified from Internshala trainings, emphasizing my commitment to industry-standard tools.I'm eager to apply my skills in mechanical engineering and design . Let's connect and explore opportunities in these dynamic fields.

I am Chetan Patel (B.Tech Mechanical Production Engineering). Completed my degree during the academic year 2005-06 from Marwadi College of Engineering affiliated under Saurastra University (INDIA). I... Read more

I am Chetan Patel (B.Tech Mechanical Production Engineering). Completed my degree during the academic year 2005-06 from Marwadi College of Engineering affiliated under Saurastra University (INDIA). I completed a master certificate course on computer aided tool engineering (MCTE) from Central Institute of Tool Design (CITD), Ahmedabad, India. siemens NX parametric was used for modeling the product.The Die was manufactured using conventional machining method and performed Plasting Injection Moulding to produce the final product.Polypropylene was used as the raw material for injection. 3) Modeled a project funded by Micro Small and Medium Enterprises (MSME) at CITD using Siemens NX. The project is in manufacturing stage and will be released in the market within few months. 4) I am working on my project to prevent Helmet theft. CAD models are prepared.

Hello Guys, I am Darshil Patel from India. I am currently working as a design engineer in Submersible Pump production company since 2021 I have a great experience about 3D Modelling, Machining Drawing... Read more

Hello Guys, I am Darshil Patel from India. I am currently working as a design engineer in Submersible Pump production company since 2021 I have a great experience about 3D Modelling, Machining Drawing, GD & T, Industrial Design.

I am a Mechanical Design Engineer with expertise in SolidWorks CAD modeling, product design, and mechanical component development. I help clients transform ideas into accurate 3D CAD models, assemblie... Read more

I am a Mechanical Design Engineer with expertise in SolidWorks CAD modeling, product design, and mechanical component development. I help clients transform ideas into accurate 3D CAD models, assemblies, and manufacturing-ready engineering drawings. My experience includes designing parts optimized for CNC machining, sheet metal fabrication, injection molding, and 3D printing. I focus on creating efficient, practical designs that meet functional requirements and manufacturing constraints. I also provide CAD conversion, assembly design, and design for manufacturing (DFM) support. I am committed to delivering high-quality work, clear communication, and reliable project support to help clients move smoothly from concept to prototype and production.

I am a Manufacturing Engineer with Engineering design as my special skill. I have 8 years of experience and have achieved a lot of achievements in those skills. As an Engineering Designer, I professio... Read more

I am a Manufacturing Engineer with Engineering design as my special skill. I have 8 years of experience and have achieved a lot of achievements in those skills. As an Engineering Designer, I professionally produce the following projects as: 1. 3D Modelling (Standard - Expert Modelling) 2. 3D Modelling from 3D Scanner Data (Mesh Data)) 3. 3D Assembly Modelling 4. 3D Exploded Modelling 5. Engineering Drawing for Manufacturer (GD&T, Welding Symbol) 6. Render Animation Engineering Simulation 7. Rendering Realistic Image. Create an engineering drawing according to the ISO Standard and put it through Engineering Drawing. I'm working with Autodesk Inventor Professional, Autodesk AutoCAD 2D & 3D, Solidworks, Siemens Solid Edge, and NX CAD/CAM. As a Manufacturing Engineer College, what I learned are : 1. Material Science 2. Fluid Mechanics 3. Engineering Mechanics 4. Manufacturing Process (Sheet Metal Fabrication, Injection Plastic, Welding, Machining, and Sand Casting Process) (Theory and Practice) 5. Material Strength 6. Production Planning 7. Automation (Programming and Practice) 8. Pneumatics and Hydraulics (Programming and Practice) 9. Occupational Health and Safety 10. Engine/Machine Element 11. Jig and Fixture Design 12. Industry Statistics 13. Industry Layout Modelling and Facility Planning 14. Choosing Material and Process 15. Maintenance (Theory and Practice) 16. Supervisor/Supervision Techniques 17. Internship

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

I am current working online internet throw mechanical design work of in udder details 01) product development __material of plastic, stile , brass ,zinc , aluminum product development)... Read more

I am current working online internet throw mechanical design work of in udder details 01) product development __material of plastic, stile , brass ,zinc , aluminum product development) 02) engineering development for. ___jig & fixture, .(cnc milling fixture , cnc turning fixture , assembly fixture inspection fixture , and other work holding equipment ) 03) engineering mould development___of plastic auto injection mould , blow mould , investment casting mould , foundry patterns , high pressure moulding patterns,grevity die casting patterns, make design in cad software. 04) engineering components ___model make as per drawing & engineering drawing make as per model. , make model engineering machining drawing, casing and process drawing.

Message me before posting your job — I typically reply within 2 hours with a scoped estimate. Most CAD freelancers draw shapes. I engineer functional, manufacturable systems built for the factory flo... Read more

Message me before posting your job — I typically reply within 2 hours with a scoped estimate. Most CAD freelancers draw shapes. I engineer functional, manufacturable systems built for the factory floor. I'm a Mechanical Engineer (NIT Andhra Pradesh, B.Tech 2026) and the founder of Aerora Dynamics, an industrial UAV startup building heavy-payload drones. I lead end-to-end mechanical design for autonomous multi-rotor aircraft: weight budgets, aerodynamic clearances, structural stress conditions, and Design-for-Manufacturing from day one — not CAD models that look good but can't be built. Recent proof of work: I took a hexacopter chassis (25 kg MTOW, 10 kg payload capacity) from a SolidWorks parametric assembly through FEA validation to CNC-aluminum prototype coordination. The arm-to-socket junction was redesigned twice against simulation data before reaching a 1.78x safety factor at rated load. That's the standard I hold every project to. CORE EXPERTISE - Complex 3D parametric modeling in SolidWorks 2024 and Fusion 360 - Design for Manufacturing (DfM): CNC machining, carbon-fiber layup, injection molding, 3D printing - FEA: static stress, displacement, fatigue, and modal analysis - Structural optimization: mass reduction under load constraints - Hardware-software integration: MATLAB/Simulink kinematic modeling - SITL export: URDF/SDF models for ROS2/Gazebo environments - GD&T per ISO/ANSI standards, full tolerance stack-up analysis TOOL CHAIN Primary: SolidWorks 2024 Secondary: Autodesk Fusion 360, CATIA V5, PTC Creo Parametric, AutoCAD Simulation: ANSYS Workbench, SolidWorks Simulation Manufacturing: GD&T, tolerance analysis, DfM/DFA review WHAT YOU GET Native CAD files, STEP/IGES/STL/DXF exports, an FEA report with boundary conditions and results documented, a full technical drawing set, and a BOM ready for procurement. Every geometry I deliver is DfM-verified and fully tolerance-specified before it reaches you. Message me before posting a job — I respond within 2 hours and will confirm scope and feasibility upfront.

Interested in 3D modeling and analysis. -3D Modeling, - Concept Design, - Product Design, -Industrial Design -Mechanical design, -Rendering, -Strength Analysis, -Failure Analysis -Machining and Manufa... Read more

Interested in 3D modeling and analysis. -3D Modeling, - Concept Design, - Product Design, -Industrial Design -Mechanical design, -Rendering, -Strength Analysis, -Failure Analysis -Machining and Manufacture. - teaching 3d modeling software( Catia, solid works ). etc.

Mechanical engineer(Bachelor of Technology) Worked on several CAD projects including a funded AR based design Project, Completed 3 axis machining in Fusion 360 by Autodesk. I can handle CAD softwares... Read more

Mechanical engineer(Bachelor of Technology) Worked on several CAD projects including a funded AR based design Project, Completed 3 axis machining in Fusion 360 by Autodesk. I can handle CAD softwares like Autodesk Fusion 360 , CATIA V5, Blender, Autodesk Maya, I can do design, rendering, simulation, manufacturing and animation Also interested in core mechanical subjects and engineering problem solving. See more works at https://drive.google.com/folderview?id=16Wqm4EtqKHTQ1BH2HUp4nk5O8zW96fZK

Results-driven Freelance Designer and CAE Expert with 7+ years of experience driving innovation in the aerospace, automotive, and energy industries. Proven track record of delivering high-performance... Read more

Results-driven Freelance Designer and CAE Expert with 7+ years of experience driving innovation in the aerospace, automotive, and energy industries. Proven track record of delivering high-performance design, simulation, and analysis solutions that optimize efficiency and enhance system performance. Skilled in thermal management, structural design, and fluid dynamics, with advanced expertise in Siemens NX, Ansys, and OpenFOAM. Notable achievements include: Improved solar cell efficiency by 25% through advanced thermal management and structural design optimization. Developed and analyzed mechanical components for high-performance systems, ensuring accuracy in stress analysis and thermal simulations. Provided CAE simulation support for PhD research papers, contributing to advancements in hydrogen fuel cells and thermal optimization. Collaborated with cross-functional teams to design and optimize vehicle aerodynamics, resulting in a 15% reduction in drag coefficient. Designed and simulated complex piping systems for industrial applications, ensuring compliance with ASME standards. Created detailed 3D models and animations for client presentations, enhancing communication and project understanding. Successfully managed multiple projects simultaneously, meeting tight deadlines and exceeding client expectations. Developed and implemented custom scripts and macros in Siemens NX and Ansys to streamline workflows and increase productivity. Conducted training sessions and workshops on CAE software and best practices for junior engineers and students. With a solid foundation in CNC machining, G-code programming, and reverse engineering, I deliver practical, scientifically sound solutions that meet client requirements and exceed expectations.

CAREER OBJECTIVES: To be a part of a growing and reputed organization, which provides sample opportunities for me to utilize my knowledge and skills thereby, contributing to the success of the orga... Read more

CAREER OBJECTIVES: To be a part of a growing and reputed organization, which provides sample opportunities for me to utilize my knowledge and skills thereby, contributing to the success of the organization, and thus leads to my professional and personal growth. STRENGTHS:  Well Regarded for inter personal, written and oral communication skill.  Can handle multiple tasks simultaneously.  Ability to acquire and apply knowledge rapidly.  Can work independently with minimal supervision and contributes to a team.  Supportive attitude.  Loyal. WORK EXPERIENCE: • Having 6 years of Experience in TOOL FIXTURE DESIGN. CURRENT WORK EXPERIENCE: • Presently Working with ONWARD TECHNOLOGIES LIMITED as a Senior Design Engineer from 29th NOV 2016 to till date. PREVIOUS WORK EXPERIENCE: • Worked with GGS ENGINEERING SOLUTIONS PVT LTD as a Design Engineer from 03rd of August 2015 To 25th November 2016(1.3 YRS) • Worked with CADTECH ENGINEERING SOLUTIONS PVT.LTD. As a CAD ENGINEER in PUNE From 09TH MARCH 2012 TO 01ST AUG 2015 (3.5 YRS) (ON SITE WORKED IN JOHN DEER INDIA PVT LTD). • Worked with LITEX ELECTRICAL PVT LTD as a PROJECT ENGINEER from 1ST AUG. 2011 to 28TH FEB 2012.(08 MONTHS) RESPONSIBILITIES IN CURRENT ORGANISATION • Concept design for welding fixtures, Assembly fixtures, Machining fixtures and Gauges for Johndeere products. • Preparing manufacturing drawing for the same. • Project Management. • Design review. • Quality check. • Simulation study for fixtures. • Check in the tools to PDM after final Review. • Leading and guiding the team members. (4 members) • Attending meetings with customer for better improvements in design. RESPONSIBILITIES IN PREVIOUS ORGANISATION (LITEX):  Receiving the work from customer.  Modeling and drafting and design of jigs and fixtures and gauges.  Submission of designs to Peer QC for final approval.  Defect Prevention and Process Improvement activity.  Software used: Pro- E wildfire 4.0 (wind chill), Auto CAD 2010.  Projects carried out:  LAMP FIXTURE & GUAGE  PRESS SEAL FIXTURE  SUPPORTING JIG AND GUAGE.  ROD WELDIND AND CUTTING FIXTURE.  DESIGNED OF CUTTING AND CRIMPING M/C  DESIGNE OF TUBE CUTTING M/C  LAMP CAP FIXTURE. • SOFTWARES USED: PRO-E WILD FIRE 4.0, AUTO CADD 2009. • OTHER TRANINING PROGRAMS:- ATTENDEND ON JOB TRAINING IN NTTF INDUSTRIES LTD. BANGALURU. DURATION: 50 DAYS. • ACTIVITIES:  KNOWING VARIOUS DEPARTMENTS & ACTIVITIES.  KNOWING PRODUCTION ACTIVITIES.  KNOWING DESIGN STANDARDS.  DETAILING OF TOOL ELEMENTS.  MODELLING AND ASSEMBLING OF PARTS. ACADEMIC DETAILS: B.TECH IN MECHANICAL ENGINEERING: Duration : 2011-2014. Institution: JAWAHARLAL NEHRU TECHNOLOGICAL UNIVERSITY (HYDERABAD). Result : 68.0%. POST DIPLOMA IN TOOL DESIGN: Duration : 2009-2010. Institution: NETTUR TECHNICAL TRAINING FOUNDATION (NTTF) DHARWAD. Result : 6.98 SGPA. DIPLOMA IN TOOL AND DIE MAKING: Duration : 2005-2009. Institution: NETTUR TECHNICAL TRAINING FOUNDATION (NTTF). Result : 65.06%. S.S.L.C: Duration : 2004-2005. Institution: CHALLAPALLI PUBLIC SCHOOL. Result : 78.0% SOFTWARE PROFICIENCY:  CREO  Pro-E – Wild fire 5.0.  Solid works.  Auto CAD 2009.  CATIA V5 (BASIC). SPECIALIZATION:  Mould Design Technology  Press Tool Design Technology  Jigs & fixtures Design  Material Technology  Geometrical Dimensioning & Tolerance. • HOBBIES:- Reading books, News paper, Internet browsing, listening music, cricket, chess. PERSONAL DETAILS: Name : P.V.B MURALI KRISHNA. Father’s Name : P.SATYANARAYANA. Date of Birth : 14/01/1990. Sex : Male. Nationality : Indian. Languages known : English, Hindi, Telugu. Marital Status : Single. Passport No : J6324202 Permanent Address : P.V.B MURALI KRISHNA. S/O P.SATYANARAYANA. GHANTASALA PALEM, GHANTASALA (M.D), KRISHNA (D.T) ANDHRAPRADESH-521133

I am a Vmc operator cum programmer with 10 years experience jigs fixtures gauge designer with 2 year experience done several projects on fixtures and also done several projects on vmc die machining

I am a Vmc operator cum programmer with 10 years experience jigs fixtures gauge designer with 2 year experience done several projects on fixtures and also done several projects on vmc die machining

With over 22 years of experience in mechanical engineering and aluminum casting technology, I specialize in delivering innovative and cost-effective manufacturing solutions across multiple industries.... Read more

With over 22 years of experience in mechanical engineering and aluminum casting technology, I specialize in delivering innovative and cost-effective manufacturing solutions across multiple industries. My professional journey began in CNC machining, quality control, and small motor design before advancing into aluminum die casting engineering. Over the years, I have developed extensive expertise in High Pressure Die Casting (HPDC), Gravity Die Casting (GDC), Tilt Gravity Die Casting (TGDC), and Low Pressure Die Casting (LPDC). My core strengths include: ✅ Aluminum Casting Development ✅ Die Design and Optimization ✅ MAGMA Flow & Solidification Simulation ✅ Adstefan Flow & Solidification Simulation ✅ CREO (Pro/ENGINEER) Design ✅ Runner & Gate System Calculations ✅ Casting Defect Analysis and Reduction ✅ New Product Development (NPD) ✅ Process Improvement and Cost Reduction ✅ Manufacturing Engineering Solutions I have successfully contributed to numerous casting projects by improving quality, reducing rejection rates, optimizing tooling performance, and supporting product launches from concept to production. My passion is helping organizations achieve manufacturing excellence through engineering innovation, simulation-driven design, and practical problem-solving. I am open to collaborating with manufacturers, foundries, engineering companies, and product development teams worldwide. Featured Skills Aluminum Die Casting HPDC LPDC GDC TGDC Die Design MAGMA Simulation ADSTEFAN Simulation CREO Parametric Product Development Tool Design Manufacturing Engineering Process Optimization Casting Defects Analysis Quality Improvement Lean Manufacturing CAD Engineering New Product Development (NPD) Engineering Consulting Services ✔ Aluminum Casting Solutions ✔ Die Design Review ✔ Runner & Gate Design Calculations ✔ Casting Defect Analysis ✔ MAGMA Simulation Support ✔ Product Development Support ✔ Manufacturing Cost Optimization ✔ Foundry Process Improvement ✔ Technical Training & Mentoring Helping manufacturers improve casting quality, reduce defects, and accelerate product development through engineering expertise and simulation-driven solutions.

Mechanical Design Engineer| Product design| Design Thinking|Innovation| Prototyping I am a mechanical engineer experienced in SolidWorks. Along with my CAD experience, I have worked in the manufact... Read more

Mechanical Design Engineer| Product design| Design Thinking|Innovation| Prototyping I am a mechanical engineer experienced in SolidWorks. Along with my CAD experience, I have worked in the manufacturing industry so I know how things work in the real world and can design accordingly. I am also creative in my designs and innovative ideas: My skill sets are: 1.Design, Development, and Drafting. 2. Prototype Designing and Assembling. 3.Product Verification & Validation. 4.Project Management. 5.Developing fundamentals like Core & Cavity, Parting lines, Draft, Sliders, Snapping for Plastics Products 6.Product Design for Plastic and Sheet metal Products. 7.Knowledge of Manufacturing operations like Blanking, Forming, Piercing, Riveting etc. for sheet metal products. 8.Bench-marking and Reverse Engineering. 9. Geometric Dimensioning & Tolerancing. 10. Design and Development knowledge of Extrusion Profiles and Machining of these profiles. 11. Design and Development of mechanisms.

As a Mechanical Engineering professional with extensive experience, I am proficient in a wide range of CAD services, including 3D modeling, machine development & design, sheet metal design, casting &... Read more

As a Mechanical Engineering professional with extensive experience, I am proficient in a wide range of CAD services, including 3D modeling, machine development & design, sheet metal design, casting & machining product design and reverse engineering. My expertise in 3D modelling software further enhances my capabilities in delivering top-notch engineering solutions. Throughout my career, I have successfully executed numerous projects, showcasing my ability to conceptualize and design innovative solutions that meet and exceed client expectations. My passion for precision and attention to detail ensure accuracy in every aspect of my work. I am excited to contribute my expertise and technical acumen to further your projects' success and be part of an innovative and forward-thinking team. Let's connect to explore how I can leverage my skills to drive impactful results for your organization or projects I am excited to contribute my expertise and technical acumen to further your projects' success and be part of an innovative and forward-thinking team. Let's connect to explore how I can leverage my skills to drive impactful results for your organization or projects

Highly efficient, smart working and talented design engineer Concept development, new product design, manufacturing and construction methods Experienced in all design stages of a product Development... Read more

Highly efficient, smart working and talented design engineer Concept development, new product design, manufacturing and construction methods Experienced in all design stages of a product Development and manufacture including material selection, machining process

I am a Mechanical Designer specializing in high-precision 3D modeling and manufacturing-ready technical documentation. With a strong foundation in engineering principles, I bridge the gap between comp... Read more

I am a Mechanical Designer specializing in high-precision 3D modeling and manufacturing-ready technical documentation. With a strong foundation in engineering principles, I bridge the gap between complex digital designs and the shop floor. ​Software Expertise: ​CAD: Siemens NX, FreeCAD (Advanced 1.0.2), AutoCAD, Onshape, Blender. ​CAM/CNC: G-code generation for Fanuc controllers, VMC machining strategies, and toolpath optimization. ​What I Offer: ​High-Precision 3D Modeling: Expert-level part and complex assembly design, with a focus on mechanical components and gear systems. ​Manufacturing-Ready Drawings: Detailed 2D technical drawings (orthographic, sectional, and isometric views) with precise tolerances. ​Specialized Designs: Experience in modeling complex geometries like lathe jaws, V-grooves, and helical threads. ​Design for Manufacturing (DFM): Ensuring every model is optimized for CNC/VMC production to reduce machining time and costs. ​I am committed to delivering accurate, high-quality work that meets strict engineering standards. Let’s turn your concepts into functional, manufacturable reality.

I am a CNC Designer and Programmer with 3.5+ years of hands-on experience in wooden CNC machining, based in Visakhapatnam, India. I specialize in creating detailed 2D and 3D designs using ArtCAM Pro 9... Read more

I am a CNC Designer and Programmer with 3.5+ years of hands-on experience in wooden CNC machining, based in Visakhapatnam, India. I specialize in creating detailed 2D and 3D designs using ArtCAM Pro 9.1 and Autodesk ArtCAM, and I am skilled in generating accurate CNC toolpaths and machining programs for woodworking machines. My work includes designing decorative panels, doors, custom furniture components, and ornamental wooden pieces and also i know how to creating designs for metal like aluminium etc and stone. I run my own CNC workshop — Srusti Furniture Works — where I handle everything from concept design to final machine output, giving me a complete understanding of how a design performs in real-world production. I hold a Bachelor of Technology degree in Electronics & Communication Engineering, which gives me a strong technical foundation alongside my practical CNC skills. I am reliable, detail-oriented, and committed to delivering clean, production-ready files on time. If you need ArtCAM design work, toolpath generation, furniture panel design, or CNC file conversion, I am ready to help bring your project to life.

Mechanical Design Engineer with 5+ years of experience in product design, sheet-metal structures, and manufacturing processes, delivering cost-effective and innovative engineering solutions. My expert... Read more

Mechanical Design Engineer with 5+ years of experience in product design, sheet-metal structures, and manufacturing processes, delivering cost-effective and innovative engineering solutions. My expertise lies in 3D modeling, structural design, and prototyping using SolidWorks, CATIA, and AutoCAD, with a strong focus on manufacturability, precision, and efficiency. Over the years, I have successfully led projects involving industrial furnaces, automated metro gates, welding fixtures, and sheet-metal products, achieving measurable results such as 15% material cost reduction through design optimization. I bring hands-on knowledge of GD&T, BOM/BOQ preparation, fabrication processes (laser cutting, bending, welding, machining), and procurement coordination. I am skilled at collaborating with cross-functional teams, improving product designs through value engineering and analysis, and ensuring timely project execution. With a keen eye for detail, creative problem-solving ability, and a strong grasp of engineering standards, I deliver designs that balance innovation, quality, and cost-effectiveness.

*Two years of experience as PROJECT ENGINEER in "PCB TEST JIGS & FIXTURE "manufacturing company. *Where I am doing custom designing of PCB TEST JIGS and fixtures for the different customer as per the... Read more

*Two years of experience as PROJECT ENGINEER in "PCB TEST JIGS & FIXTURE "manufacturing company. *Where I am doing custom designing of PCB TEST JIGS and fixtures for the different customer as per their need. *I have a brief knowledge of cad software like AutoCAD, CATIA, Solidworks, creo,NX, draftsight etc. *Also doing the manufacturing job too by machining this product in the CNC MACHINE. *Also more than one year's experience as CNC operator in the same company. *So I have command over the design to final assembly of the custom built product.