Michael Dimou Product designer + Creative lead Athens, Greece ​ Over 7 years in product design/engineering. Worked for marine, food-beverage and design industry. Passionate with design and engineer... Read more

Michael Dimou Product designer + Creative lead Athens, Greece ​ Over 7 years in product design/engineering. Worked for marine, food-beverage and design industry. Passionate with design and engineering, trying to create a new world without boundaries. In every stages of his working life, he learned: to think - to motivate - to create - to be alternative - to be innovative. Certificate Autodesk : Autocad 2D/3D , Inventor advanced . I have experience to design machines industrial for bottling and packaging , windlasses, thrusters, maritime engineering, gadget design, inventions etc. My Graduate thesis to Piraeus University of applied science : "Design of part of the fuselage of a transports cargo aircraft A400M."

Enthusiast with State of the art Automation with passion in Design. Searching for a freelance position in CAD Design. Searching for jobs that combines human interaction, teamwork, brainstorming and ap... Read more

Enthusiast with State of the art Automation with passion in Design. Searching for a freelance position in CAD Design. Searching for jobs that combines human interaction, teamwork, brainstorming and application of design and mechanical knowledge. Willing to work under pressure, used in keeping up with tight deadlines, not afraid to take risks. Background: My first internship in S.Kalogeropoulos & Sia, in which my job was hands on pumps,turbines and motors of ships. Subsequently, I started working as a researcher for LMS (Laboratory of Manufacturing and automation Systems), where I worked on the simulation of production lines and mechanisms using CAD systems, for optimization purposes. After that I worked on my thesis at Robotics Group on calculating the inverse kinematic chain of serial metamorphic robots, with the use of artificial neural networks. Now I work as a Presales Engineer in Zenon automation, which combines Drafting, 3D design, problem solving and sales.

Naval architect/ mechanical engineer with 5 years of experience, specializing in 3D modeling and design of steel structures and piping systems, but also confident in project management and on-site sup... Read more

Naval architect/ mechanical engineer with 5 years of experience, specializing in 3D modeling and design of steel structures and piping systems, but also confident in project management and on-site supervision of projects. Available services include 3D design all the way from concept design to production drawings, all manner of studies pertaining to vessels, such as hydrostatic and structural integrity assessments, and project management duties, such as coordinating teams and ensuring on time delivery of projects.

I am a Mechanical Engineer with focus on Industrial Design and Facilities Study. I have attended 3D design classes and have been involved in various projects at the Technical University of Crete. Duri... Read more

I am a Mechanical Engineer with focus on Industrial Design and Facilities Study. I have attended 3D design classes and have been involved in various projects at the Technical University of Crete. During my thesis, I designed and manufactured a 3D soft robotic gripper. My background studies have provided me with the skills to design objects with different geometries. I consider highly important to follow the latest trends in the development of novel design tools.

I specialize in the and product design and manufacturing with CAD/CAM programs. I have a BSc degree in mechanical engineer and a MSc in product design and manufacturing

I specialize in the and product design and manufacturing with CAD/CAM programs. I have a BSc degree in mechanical engineer and a MSc in product design and manufacturing

Mechanical Design Engineer with 6+ years of working experience in robotic automation and packaging machinery. Skilled in Siemens NX and project coordination with cross-functional teams, suppliers, and... Read more

Mechanical Design Engineer with 6+ years of working experience in robotic automation and packaging machinery. Skilled in Siemens NX and project coordination with cross-functional teams, suppliers, and subcontractors to deliver complex mechanical systems from concept to manufacturing

I’m a Mechanical Engineer with 8+ years of hands-on experience in the machinery sector, having worked on over 50 successful projects in factories across Greece, Europe, Balkans and USA. My focus is si... Read more

I’m a Mechanical Engineer with 8+ years of hands-on experience in the machinery sector, having worked on over 50 successful projects in factories across Greece, Europe, Balkans and USA. My focus is simple: to help manufacturers run more efficiently by delivering tailored, reliable, and high-performance solutions. From design and construction to on-site installation and support, I offer full-cycle expertise that meets the demands of modern production environments. ✅ Custom-built machinery based on real production needs ✅ Proven results in improving speed, safety, and system uptime ✅ Adaptability to your workflows, goals, and technical standards Take a look at my recent work here: 🔗 My Portfolio https://www.dropbox.com/scl/fo/z9mw2ylb4i9q9d3hy1w3z/AIJDpqcarEuwIVFzmpPcqYQ?rlkey=axb9z8r7af2z5oikpyoddim6a&dl=0 I’m currently available for new partnerships — whether you’re upgrading existing systems, building from scratch, or looking for expert input to optimize your line. Let’s talk about how I can help you move your packaging forward.

Skills • Space planning & layout design • 2D floor plans, elevations, and sections (AutoCAD) • 3D modeling & realistic views (SketchUp) • Design revisions based on your feedback Projects Designed i... Read more

Skills • Space planning & layout design • 2D floor plans, elevations, and sections (AutoCAD) • 3D modeling & realistic views (SketchUp) • Design revisions based on your feedback Projects Designed interiors including apartments and commercial spaces creating detailed space planning including accurate floor plans, elevations, sections, and 3D visualizations to support client approvals and contractor execution.

I am a Mechanical Design Engineer with a passion for innovation and creating efficient product designs. With a strong background in industrial design and mechanical engineering, I have over five years... Read more

I am a Mechanical Design Engineer with a passion for innovation and creating efficient product designs. With a strong background in industrial design and mechanical engineering, I have over five years of experience working across industries such as manufacturing and industrial equipment design. What I Do Best: - Mechanical Design: Skilled in 2D and 3D design, prototyping, and product development. I specialize in creating solutions that optimize function and cost for manufacturing processes. - CAM Programming: Extensive experience with laser and waterjet cutting machine programming, helping clients turn designs into precision-cut products. - Team Leadership: As a Design Department Manager, I have led teams, managed project timelines, and ensured the highest quality output for customers. -Customer Communication: I work closely with clients to understand their needs and translate them into technical designs, ensuring project success from concept to delivery. Tools & Technologies: - CAD Software: Proficient in AutoCAD, SolidWorks, PTC Creo, and KeyShot for design and rendering. - Graphic Design: Experienced with Adobe Photoshop, Illustrator, and InDesign for marketing materials, product presentations, and visual design. I am committed to delivering quality work, and I thrive in roles where I can collaborate with teams and clients to solve complex design challenges. Whether you're looking for precise product designs, efficient manufacturing solutions, or creative problem-solving, I am ready to help your project succeed.

A Versatile, highly analytical, creative individual with experience as a R&D Mechanical Design Engineer and 2 Masters Degrees in Mechanical & Electrical Engineering. I have worked in various industr... Read more

A Versatile, highly analytical, creative individual with experience as a R&D Mechanical Design Engineer and 2 Masters Degrees in Mechanical & Electrical Engineering. I have worked in various industries and projects, always achieving more than expected going a step further. I can do Mechanical Design of various products/machines/systems, FEA Analysis, Manuals & Documentations of these products as well as renderings. I also can simulate various problems using Matlab Programming, if this is needed. My experience as well as extensive studies in Engineering enable me to view products/projects from various perspectives, and therefore am able to provide better & more complete solutions.

A competent electrical (digital) engineer with a comprehensive educational and practical knowledge in electrical design and installation monitoring. Experience in working with UK, European and Middle... Read more

A competent electrical (digital) engineer with a comprehensive educational and practical knowledge in electrical design and installation monitoring. Experience in working with UK, European and Middle East standards. Design of electrical systems, focusing on economy, safety, reliability, quality and sustainability. Resourceful, analytical and detail-driven with capabilities in completing projects with competing deadlines. Clear communicator with excellent verbal and written communication skills. Strong interpersonal skills, interface effectively with co-workers and clients.

I am a graduate architect that loves evverything about design. I love interior and urban design, jewelry making, dancing, listening to music and readind motivation books. I have experience in interio... Read more

I am a graduate architect that loves evverything about design. I love interior and urban design, jewelry making, dancing, listening to music and readind motivation books. I have experience in interior design and recently I have been a member of a team that designed a Montessori school in Greece. I worked both for the interior and detail construction for the project above. I run my own company with handmade jewelry and I also design logo and buissiness cards. I like to think of myself as proffessional and hardworking. I am friendly as needed with my coworkers and I give my best to create the best results for every project I am occupied with. Jewelry design is a hobby that turned into buissiness while I was suffering with cancer. Creativity never got away from me. I love being challenged and I work well even under pressure. There are no limits for anything.

I have an integrated master’s degree in production engineering and management and until October I was employed as a computer numerical control (CNC) machine operator with a small, but well known, indu... Read more

I have an integrated master’s degree in production engineering and management and until October I was employed as a computer numerical control (CNC) machine operator with a small, but well known, industrial business in Athens, called CNC Solutions. However, I feel that it is time to move into a more challenging position where I can put my skills, training and ambition to good use. My main field of interest is “engineering design” and I have academic experience at a pretty decent level, especially considering my little working experience in the field. Also, I feel like being involved in the production process, management and logistics of a business. During my studies in Technical University of Crete and in Politechnika Lubelska (via Erasmus+ program), I have participated in many courses concerning mechanical drawing, CAD, CAM, 3D modeling, product design, production technology. Also, throughout the completion of my thesis, with a title of “Study of rendering of mechanical parts by 3D Studio Max”, I worked on Computer-aided design, mechanical drawing and rendering of mechanical parts, for educational use. Due to my studies and my thesis, I have experience creating designs using Autodesk Inventor 2020 and Catia V5 and generating renderings, using 3D Studio Max. As mentioned before, my main working experience was with CNC Solutions. It is a company that provides CNC machining of high precision and complexity, ensuring high quality specifications of various industrial sectors such as aerospace, automotive industry, shipping, defense and medical equipment. When I first graduated, I thought that working in a company like this would be the perfect opportunity in order to gain knowledge and upgrade my skills in the field of production. My job was related to the production process of parts, including the identification of equipment that is best to be used, the CNC programming on Fanuc G-Code, the presetting of Haas and Okuma CNC lathes and the maintenance of desirable geometry of produced parts, using gages and measuring instruments in order to meet tolerance and geometry requirements. During my studies, I was a volunteering member in a Non-Government Organisation, called Youth Entrepreneurship Club (YEC), for four years. Several times, I led a team of 8 interns, via Erasmus+ program, in elaborating departments such as web development & design, marketing, human relations, social media, and of more than 20 Greek volunteers, in order to organize events, seminars and meetings concerning young entrepreneurship and start-up businesses, from scratch. During my time being a volunteer at YEC, I had responsibilities for coordinating logistics and errands and on team leadership at Startup Europe Week Crete, a paneuropean entrepreneurship conference, with more than 1200 participants, 25 speakers, 80 volunteers, 21 mentors in the 4 regions of Crete, each year of 2016, 2017, 2018 & 2019. My skills include having great communication abilities, being hardworker and a team player, that can also stand alone. I have the ability to work under pressure. I believe that routine impinge on the quality of the result, and I am always looking for challenges that push me to give my best and to hatch working solutions. I am very much enthusiastic about 3D design, especially of mechanical parts and assemblies and through my studies I have gained a lot of knowledge that I want to improve. Due to my job, I daily face the manufacturing process of mechanical parts, just like the ones I designed for my thesis, therefore I can improve my prowess in both fields of my interest.

We are a team of architects with 10+ years of experience as CAD and BIM drafters, based in Athens, Greece. Our advanced knowledge of CAD and AutoCAD software combined with superior technical design sk... Read more

We are a team of architects with 10+ years of experience as CAD and BIM drafters, based in Athens, Greece. Our advanced knowledge of CAD and AutoCAD software combined with superior technical design skills are the safest indicator for the best results even in tight deadlines. We also have expert knowledge of BIM (Building Information Modeling) tools and mockup software.

Hello! I am a seasoned CAD designer with over 8 years of hands-on experience in computer-aided design, specializing in Fusion 360, Autodesk Inventor, and AutoCAD. My expertise lies in creating highly... Read more

Hello! I am a seasoned CAD designer with over 8 years of hands-on experience in computer-aided design, specializing in Fusion 360, Autodesk Inventor, and AutoCAD. My expertise lies in creating highly detailed and manufacturable 3D models for a wide range of applications, including CNC milling, lathe operations, laser cutting, and 3D printing.

Hi my name is Ghazanfar (Lion). I am a confident, articulate and determined Mechanical Design Engineer who has experience of being involved in a wide range of design projects. I'm currently looking fo... Read more

Hi my name is Ghazanfar (Lion). I am a confident, articulate and determined Mechanical Design Engineer who has experience of being involved in a wide range of design projects. I'm currently looking for an exciting place to showcase my skills and expand them.