Hire FEA Designers in Spain

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, ther... Read more

Mechanical Engineer with more than 15 years of experience in the design, calculation, and optimization of industrial equipment and pressure systems. I specialize in pressure vessels, autoclaves, thermal systems, and custom industrial machinery, working in compliance with European regulations and standards such as EN 13445, PED, AD 2000, and ATEX when applicable. My background includes the complete engineering lifecycle of industrial equipment: • Concept development and feasibility studies • Mechanical and thermal calculations • Pressure equipment design and verification • CAD design and detailing (SolidWorks, AutoCAD, Plant 3D) • Manufacturing drawings and technical documentation • Design optimization for safety, cost, and manufacturability • Support for certification, audits, and regulatory compliance I have extensive experience working with regulated environments, including pharmaceutical and process industries, where traceability, documentation quality, and compliance are critical. Typical deliverables I provide include calculation reports, Excel-based engineering tools, 2D manufacturing drawings, 3D CAD models, and technical documentation ready for internal reviews or third-party certification. I work closely with clients to translate functional requirements into robust, manufacturable engineering solutions, maintaining clear communication, realistic timelines, and a strong focus on engineering quality. Industries served include industrial equipment manufacturers, process engineering companies, pharmaceutical and biotech suppliers, and custom machinery builders.

I am an architect and interior designer with over 8 years of professional experience in architectural and interior design projects, ranging from residential and commercial spaces to hospitality and pu... Read more

I am an architect and interior designer with over 8 years of professional experience in architectural and interior design projects, ranging from residential and commercial spaces to hospitality and public facilities. Throughout my career, I have worked extensively on projects such as hotels, restaurants, food courts, spas, gyms, administrative buildings, and residential villas, delivering both creative design concepts and fully detailed, build-ready drawings. I have a strong background in transforming ideas and references into high-quality 3D designs while ensuring functionality, aesthetics, and feasibility. I previously worked at Ragab Group in Alexandria, a multidisciplinary development company that owns and manages a wide range of projects, including hotels, restaurants, universities, and commercial facilities. During my time there, I was involved in interior design, 3D visualization, coordination with design teams, and preparing accurate drawings aligned with real execution standards. I specialize in creating realistic 3D renders and precise technical drawings, ensuring that every design is not only visually appealing but also practical and ready for construction. My workflow focuses on attention to detail, accurate dimensions, material selection, and consistency between 3D visuals and execution drawings. I am highly proficient in industry-standard design software, including: 3ds Max for modeling and scene setup Corona Renderer and V-Ray for photorealistic rendering Blender for advanced 3D modeling and visualization AutoCAD for detailed architectural and shop drawings Adobe Photoshop for post-production and presentation In addition to design and visualization, I have experience preparing: Complete execution drawings Lighting, ceiling, and electrical layouts Furniture layouts and custom furniture details Quantity take-offs and material schedules I am committed to clear communication, fast response times, and meeting deadlines while maintaining high design and technical quality. I enjoy collaborating with teams, adapting to different project requirements, and delivering professional results that meet both design vision and execution needs. I am always looking for new challenges where I can add value through creative thinking, technical accuracy, and reliable project delivery.

I am a recently graduated automotive designer (1st class) who believes that my personal, academic skills and automotive design expertise perfectly link together to make me a great candidate for any jo... Read more

I am a recently graduated automotive designer (1st class) who believes that my personal, academic skills and automotive design expertise perfectly link together to make me a great candidate for any job in the automotive, transport and product design industry. My designing skills have been developed though my BA (hons) in Automotive & Transport Design. The main design and creative skills that I have used are hand and digital sketching, Adobe Photoshop, Illustrator, Alias Autodesk and VRED. These design skills have been further developed in my final year projects. By using my creative and environmentally friendly mentality, I can efficiently merge design and technology together. For example, I have worked on a self-sustained hypercar which will be powered by solar and wind energy and designed to reach the highest level of efficiency and performance. This will be possible by using simultaneously intelligent design and aesthetic simplicity which constantly addresses aerodynamics and effectiveness. The design features high-end technology and a body created to get as much solar and wind energy as possible. The process that I follow in my projects is the usual for any car design development in industry. Firstly, I come up with an idea from existing inspiration or by acknowledging a gap or target market not covered yet. I then complete some research and start roughly hand sketching my ideas which I later refine with more defined hand and Photoshop sketches. After that, I create orthographic views and the package drawings in order to start modelling the concept in Alias Autodesk. Once done, I render the model in VRED and I also create some final Photoshop renderings and am therefore confident of my skills in using the Adobe suite of packages especially Photoshop. My personal skills, I believe, make me highly suited to the design and automotive industries as I always pursue creativity and innovation together with a hard working attitude and a quest for excellence. I like to push myself to improve through practice, observing others and learning from my surroundings. My observation skills and ability to synthesise ideas plus my mature and calm nature, gives me a strong problem solving capacity with a responsible point of view. For example, the issue I spotted in my final year motorcycle project was that if the engine modifications were not complemented by corresponding body design alterations, then optimum performance would never be achieved. This sort of creative inspiration is something that I routinely bring to my work. As seen in my final course project, I am an innovative person who is passionate about creating new ways of futuristic mobility in consonance with the environment. I am also an enthusiastic person who likes to get involved. I can comfortably adapt to any situation and love to learn from others, which perfectly links up with my capacity of working as part of a team. Due to this dedication, I easily achieve good results on whatever I work on. I am self-organised, proactive and resilient and during my final year I combined adapting to the change in my degree course from face to face to online studies due to the COVID restrictions; but I also managed multiple deadlines, a final year design project whilst working on a part time project creating a 3d model using Alias Autodesk as a commission piece for an artist colleague. I am a self-confident and persuasive person who likes to debate with respect and understanding of other’s opinions, and as such I am a skilled, multi-lingual (Spanish, English and Basic French) communicator and leader. I also consider myself an open-minded person with an international upbringing. For example, moving away from home has developed my confidence in personal and professional aspects.

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like st... Read more

If you a looking for a high-quality result, you are in the right place. My name is Luis and I am industrial engineer. I am an expert in mechanical design and fabrication. I can do complex jobs like stress, fatigue, dynamic analysis. Also, I can do more simple jobs like 3D modeling, drawings. I participated in the design and fabrication of a Formula Student car. Also, I competed in the Formula Student competition. I have experience in 3D modelling, product design, fabrication and product development. I can do reports, calculations, FEA, dynamic simulations, presentations. I have experience working in an engineering company. I design products that satisfy the client's needs.

SolidWorks (Advanced) ANSYS FEA & Simulation Siemens Unigraphics / NX AutoCAD Inventor GMP Pharmaceutical Design Design for Manufacturing (DFM) Structural & Mechanical Modeling Field Engineering & Com... Read more

SolidWorks (Advanced) ANSYS FEA & Simulation Siemens Unigraphics / NX AutoCAD Inventor GMP Pharmaceutical Design Design for Manufacturing (DFM) Structural & Mechanical Modeling Field Engineering & Commissioning Cross-border Project Leadership MATLAB / Python QGIS / ArcGIS UAV Systems Integration

I’m a US-licensed architect currently based in Spain, with experience managing and delivering small-scale built projects and collaborating on large-scale collective housing proposals across internatio... Read more

I’m a US-licensed architect currently based in Spain, with experience managing and delivering small-scale built projects and collaborating on large-scale collective housing proposals across international contexts. My background combines hands-on project management with strong design development skills. I’m comfortable moving a project from early concept through detailed documentation, and I enjoy working across drawings, diagrams, visualizations, and physical models. I’m highly proficient in Archicad and experienced in producing clear, well-structured drawing sets and presentation materials. After completing the Master in Collective Housing (MCH) at UPM-ETH in Madrid, I deepened my focus on housing as a fundamental social infrastructure. I’m particularly interested in collective housing, adaptive reuse, and projects that engage broader social and urban questions. My work is grounded in clarity, context, and buildability — design ideas need to be both compelling and feasible. Clients appreciate that I am: • Organized and reliable with timelines • Direct and communicative throughout the process • Thoughtful about context and user experience • Detail-oriented without losing sight of the big picture Whether you need support with concept design, competition work, drawing production, housing research, or project coordination, I bring both design sensitivity and practical execution to the table. Let’s build something meaningful and well-crafted.

Map of skills applicable In Design… Product Design: concept, innovation, new product Industrial Design: free form shapes, product graphic, color design Graphic Design: logos, corporate image, spor... Read more

Map of skills applicable In Design… Product Design: concept, innovation, new product Industrial Design: free form shapes, product graphic, color design Graphic Design: logos, corporate image, sport products, cars, motorbikes Tool Design: sheet metal tools, fiber laminate molds, silicone molds In R&D, Modeling, prototyping and paint… Industrial clay modeling Metal shop, CNC/manual, lathe, mill, grinder, press, electric/gas welding, sheet metal shaping Plastic: laminating with resins, prepeg, plastic welding, molds Wood: free form, model making, structural design Paint: industrial paint cars/ motorbikes, art replicas, color design, color effects 3D computer modeling Marketing and Management… Technical and marketing language skill in English, German and Spanish Product description text, name, feasibility study, b-plan, executive summary Project Management, Six Sigma, trouble shooting, team work at all levels Computer Programs… Light Wave V9.0: 3D modeling and animation program Master Cam V9 & 13: CAD/CAM technical drawing, CNC data for mill and lathe Coral Draw V13: graphic editing program Microsoft Word and Power Point: text and presentation program

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

Mechanical Design Engineer specialized in CATIA V5, product development, plastic part design, and tooling. I help companies turn ideas into manufacturable, high‑quality components with strong attentio... Read more

Mechanical Design Engineer specialized in CATIA V5, product development, plastic part design, and tooling. I help companies turn ideas into manufacturable, high‑quality components with strong attention to detail and industrial feasibility. Experience in automotive and regulated environments, delivering robust 3D models, assemblies, drawings, and technical documentation.

I am an Industrial Systems Engineering student and a Mechanical Designer specializing in structural validation (FEA) and rapid manufacturing. As the Chassis Manager for a Formula Student team, I have... Read more

I am an Industrial Systems Engineering student and a Mechanical Designer specializing in structural validation (FEA) and rapid manufacturing. As the Chassis Manager for a Formula Student team, I have extensive experience designing complex, high-stress components under tight deadlines. My focus is on providing end-to-end engineering solutions: from 3D CAD modeling and structural analysis (Ansys) to weight reduction and topology optimization. Furthermore, I run my own additive manufacturing hub, allowing me to understand Design for Manufacturing (DFM) deeply and produce functional physical prototypes in technical materials like PA-CF and ABS. Let's build something functional and optimized.

Mechanical and industrial designer with 4+ years of experience in product development, structural analysis, and technical documentation. I specialize in taking products from concept to manufacturing-r... Read more

Mechanical and industrial designer with 4+ years of experience in product development, structural analysis, and technical documentation. I specialize in taking products from concept to manufacturing-ready — including 3D parametric modeling, FEA simulation, fabrication drawings, BOMs, and DFM/DFA optimization. Previous experience includes designing structural components for manned submarine systems operating at 500–6,000m depth (Ictineu Submarins, Barcelona) and reverse engineering automotive bodywork components for mass production (MODASA, Lima). I hold a Master's degree in Product Design & Development from ELISAVA Barcelona. Primary tools: Fusion 360 (7 years, advanced), Rhinoceros 3D, KeyShot. Strong foundation in parametric modeling, GD&T, and manufacturing processes including sheet metal, welding, and composite materials. Available for remote freelance projects worldwide. Fast turnaround, precise deliverables, clear communication in English and Spanish.

Engineer with 7 years of experience in design, manufacturing, and project management within a factory-based production environment, specializing in the orthopedic medical device industry. Extensive in... Read more

Engineer with 7 years of experience in design, manufacturing, and project management within a factory-based production environment, specializing in the orthopedic medical device industry. Extensive involvement in the development of surgical instruments and orthopedic implants, working hand-in-hand with world-class surgeons to translate clinical needs into effective, manufacturable solutions. Fully familiarized (day to day handling) in additive manufacturing, CNC machining, and serial production, including hands-on experience in titanium additive laser sintering (metal AM) for medical-grade implants. Proven capability in managing custom-made implant workflows as well as scalable orthopedic product lines. Highly experienced in quality control process design, with a focus on simplifying, optimizing, and standardizing inspection workflows. Specialized in creating autonomous quality control processes that enable shop-floor operators to manufacture and inspect parts simultaneously, reducing dependency on senior engineering input while maintaining high quality and traceability standards. Active contributor to R&D initiatives, supporting innovation, validation, and continuous improvement of orthopedic devices and manufacturing processes. Experienced in tooling design and manufacturing, laser marking, and waterjet cutting, driving efficiency, precision, and repeatability in production environments. Advanced user of Fusion 360, including the development of custom Python automation scripts for: STL analysis and validation Automated part orientation in 3D space Feature identification and geometric evaluation Regularly collaborate with international manufacturing partners across China, India, and Pakistan, managing technical communication, supplier coordination, and quality expectations. Recognized for effectively bridging clinical insight, engineering design, advanced manufacturing, and practical quality systems, delivering reliable orthopedic solutions from concept through production

Industrial Designer | Product Development | 3D CAD Modeling | Prototyping | Design for Manufacturing I am an Industrial Designer specialized in product development, CAD modeling and prototyping. I he... Read more

Industrial Designer | Product Development | 3D CAD Modeling | Prototyping | Design for Manufacturing I am an Industrial Designer specialized in product development, CAD modeling and prototyping. I help companies, startups and entrepreneurs transform ideas into functional and manufacturable products. My work combines design thinking with technical development, allowing projects to move efficiently from concept to production-ready solutions. I focus on practical and manufacturable designs, helping clients avoid common development mistakes and improving product feasibility from the early design stages. From early concept exploration to detailed CAD models and prototyping, I support product development with a clear and structured process. Services • Industrial design and product development • 3D CAD modeling • Product visualization and rendering • Design for Manufacturing (DFM) • Prototype development • 3D printing design

As a Mechanical Engineer my passion is industrial design, CAD modeling in 2D/3D environments working with parts design, components, whole equipments and systems, assemblies and FEA. Autodesk Inventor... Read more

As a Mechanical Engineer my passion is industrial design, CAD modeling in 2D/3D environments working with parts design, components, whole equipments and systems, assemblies and FEA. Autodesk Inventor is my ideal working tool. I´m ready to start helping you making your idea a reality.

B.Sc. in Mechanical Engineering with over 16 years of experience in robotics, vacuum systems, precision mechanics, and automation. My work spans from designing and producing sustainable construction l... Read more

B.Sc. in Mechanical Engineering with over 16 years of experience in robotics, vacuum systems, precision mechanics, and automation. My work spans from designing and producing sustainable construction libraries to ultra-high vacuum equipment development (TNO/ASML), electron microscopy holders (TU Delft/Kavli), CNC robotics, and CAD modeling for high-tech manufacturing. I have led product development through all phases, from concept to testing, including systems exposed to radiation and requiring remote or robotic handling. Proficient in Fusion 360, Inventor, SolidWorks, Cimatron, FEA, and GD&T, I deliver compliant technical solutions for advanced hardware challenges. I actively integrate AI tools into my workflow, for technical writing, CAD scripting, design validation, and documentation, boosting efficiency while ensuring engineering quality. Based near Granada, Spain, and available for remote, hybrid, or relocation opportunities, I can collaborate flexibly as a direct hire or as an independent contractor through my registered Spanish company, WikiHome S.L. I bring both hands-on field knowledge and strong digital capabilities to modern engineering teams.

- Key Strengths: 3D/2D CAD design in solidworks, design solutions, build to manufacture, first time right, material selection for application., modal analysis, structural FEA, masters degree in mec... Read more

- Key Strengths: 3D/2D CAD design in solidworks, design solutions, build to manufacture, first time right, material selection for application., modal analysis, structural FEA, masters degree in mechanical engineering with 9 years experience. - Key projects delivered successfully: EU6.2, 2.0 diesel ecoblue exhaust system design and release for Ford Mo Company - 2016 - 2019. Complex exhaust system design to meet lifetime, safety, emission requirements for 100,000's of customers of vehicles with this exhaust system. System released successfully, with supply set up and all components successfully PPAP'd; meeting strict quality requirements and demand. Large scale vibration test system design with welded fabrications, pneumatic suspension, hydraulic cooling and electrical interlock safety system design. Completed assembly design in solidworks, structured bill of materials and released to be ordered.

Certifix is an accredited vehicle homologation and certification laboratory based in the Northwest of Spain. We have expanded our business and range of services beyond the homologation field to inclu... Read more

Certifix is an accredited vehicle homologation and certification laboratory based in the Northwest of Spain. We have expanded our business and range of services beyond the homologation field to include CAD and finite element method (FEM) simulations.