Hire Reverse Engineering Designers in Australia

I'm a trade-qualified fitter machinist with 29 years on the tools. I run Port Stephens Machining, a small CNC machining and fabrication shop in Salamander Bay, NSW, Australia. I have programmed and se... Read more

I'm a trade-qualified fitter machinist with 29 years on the tools. I run Port Stephens Machining, a small CNC machining and fabrication shop in Salamander Bay, NSW, Australia. I have programmed and set CNC mills and lathes since 2001, and I was a leading hand or workshop supervisor for most of the 15 years before I opened my own shop. My models are built in Fusion 360 using an AI-assisted workflow I developed: every part is fully parametric, every sketch fully constrained, and each model is run against automated checks before I review it myself as a machinist. You get native Fusion files, STEP, drawings and DXFs, usually much faster than a hand-drawn job. What I do: - Mechanical design and 3D modelling, fully parametric - Manufacturing and fabrication drawings - Sheet metal design with flat patterns and DXFs for laser and press brake - Jigs, fixtures and tooling - Reverse engineering from a sample part, or a photo and sketch - CNC programming for mills, lathes and routers - Design-for-manufacture reviews of your existing model Nothing leaves here until I've checked it can be made: sensible tolerances, real tool access, standard stock sizes. If needed I can prototype it in my own shop on CNC mills, a CNC lathe, a CNC router and a 3D printer. Background: - 2016 to now: owner, Port Stephens Machining. OEM crimping dies for the electrical, hydraulic and plumbing trades, plus jobbing work. - 2015 to 2016: workshop supervisor, OneSteel. Maintenance machine shop of 22. - 2012 to 2015: leading hand and machinist, Sandvik. Set Okuma and Mazak CNC lathes and Okuma CNC mills, including a robot-loaded lathe cell. - 2011 to 2012: on-site machinist, Temmco. Machined bores on site at mines and power stations, and designed and made the on-site machining equipment. - 2008 to 2011: leading hand and workshop supervisor, LaserBond. Reclaiming worn components, up to 30 staff. - 2001 to 2008: leading hand at two CNC job shops, programming and setting the machines. - 1997 to 2001: apprenticeship as a fitter machinist and CNC machinist. Certificate III in Engineering (Mechanical). Certificate IV in Leadership and Management. Briefs and messages are welcome in any language. I work in English and use AI translation for everything else.

I have had exposure to a wide range of design fields, e.g. from mining to structural. My skill set and passion is in 3D modelling, reverse engineering and conducting design validations to them. Some... Read more

I have had exposure to a wide range of design fields, e.g. from mining to structural. My skill set and passion is in 3D modelling, reverse engineering and conducting design validations to them. Some of my accomplishments include: 1) Designing, validating and bringing to life one of the largest "Motorbases" for one of the companies I worked for 2) Working within a regulated mining industry (particularly with Underground mining regulations) to help incorporate fiber optics through high voltage couplers 3) Assisting startups to translate their sketches into 3D models for their investment pitch

I'm a mechanical draftsman in Brisbane, Australia, drawing parts for manufacture every day at an industrial equipment maker. I take freelance work after hours. I model in SolidWorks and deliver fabri... Read more

I'm a mechanical draftsman in Brisbane, Australia, drawing parts for manufacture every day at an industrial equipment maker. I take freelance work after hours. I model in SolidWorks and deliver fabrication drawings to AS 1100 or your own standard, sheet metal flat patterns, laser-ready DXF files and KeyShot renders. I also rebuild 3D scans and STL meshes as editable STEP models. You keep the native files plus STEP, PDF and DXF. I supply models and drawings, and your engineer signs off anything that needs certification.

I am a PhD-qualified Biomedical Engineer with expertise in 3D CAD modelling, mechanical design, finite element analysis (FEA), product development, and advanced manufacturing. I specialise in transfo... Read more

I am a PhD-qualified Biomedical Engineer with expertise in 3D CAD modelling, mechanical design, finite element analysis (FEA), product development, and advanced manufacturing. I specialise in transforming complex engineering concepts into practical, manufacturable solutions, with experience spanning medical devices, orthopaedic implants, patient-specific surgical instruments, and precision mechanical components. My technical expertise includes SolidWorks, Abaqus, Materialise 3-matic, Mimics, 3D printing, CAD/CAM, and Python automation. I have hands-on experience in design optimisation, structural simulation, engineering drawings, design for manufacturing (DFM), and prototype development. With a strong research background and industry experience, I combine analytical problem-solving, attention to detail, and practical engineering knowledge to deliver accurate, functional, and production-ready designs. I welcome projects involving 3D CAD design, mechanical components, FEA, reverse engineering, product development, and design optimisation.

I am a skilled 3D designer and product developer with expertise in creating innovative, functional, and aesthetically pleasing designs. With years of experience in 3D printing, AutoCAD, and VR solutio... Read more

I am a skilled 3D designer and product developer with expertise in creating innovative, functional, and aesthetically pleasing designs. With years of experience in 3D printing, AutoCAD, and VR solutions, I specialize in turning creative ideas into tangible results. From custom product designs to technical drawings and topographical models, I am passionate about delivering high-quality, precise work tailored to my clients' needs. Let’s collaborate to bring your vision to life!

Profile Overview I am a SolidWorks‑focused mechanical designer with over 17 years of hands‑on engineering and manufacturing experience, including a trade qualification as a machinist and current work... Read more

Profile Overview I am a SolidWorks‑focused mechanical designer with over 17 years of hands‑on engineering and manufacturing experience, including a trade qualification as a machinist and current work as an Advanced Industry Lecturer in Advanced Manufacturing and Engineering at North Metro TAFE. My core strength is turning concepts, legacy drawings, and scanned hand‑drawn sketches into clean, accurate, machine‑ready CAD. I specialize in SolidWorks part and assembly design, DXF cleanup, and designs that are realistic to manufacture, not just visually correct. Because of my workshop and machining background, my designs are informed by real‑world tolerances, tooling access, material behavior, and inspection requirements. This results in parts that fit, assemble, and machine correctly the first time — saving time and cost downstream. I regularly work on: Legacy drawing digitization (including older scanned or hand‑drawn drawings) CNC‑ready DXF creation with smooth geometry and minimal joints Reverse engineering of existing components Design for manufacture and prototyping (3D print → production) Alongside industry work, I am currently completing a Bachelor of Engineering, further strengthening my analytical and design capability.

Hi! My name is Matt, I am a mechanical engineer with over 10 years' experience in the design industry. Through my career, I have designed in numerous industries, with experience in the following: - Bi... Read more

Hi! My name is Matt, I am a mechanical engineer with over 10 years' experience in the design industry. Through my career, I have designed in numerous industries, with experience in the following: - Biomedical equipment (neonatal humidicribs with transport systems) - Moulds and toolings for fibreglass - Heavy truck sub-frames and vacuum truck systems - Wastewater and water treatment process systems using ozone and oxygen gas injection and generation systems - Process systems and mechanical components for use in the nuclear industry (waste treatment/encapsulation) - Residential (kitchen benches) - Custom toolboxes - Trailers and caravans I also have significant experience in reverse engineering components and systems. I have 10+ years' experience with Solidworks, and I hold the following certifications: - Certified Solidworks (CSW) Associate - CSW Professional - CSW Professional Advanced - Sheet Metal, Weldments, Drawing Tools and Surfacing - CSW Expert I have over 10 years' experience with additive manufacturing and CNC manufacturing as well as an intimate understanding of fabrication and manufacturing techniques. Please note - I have quoted a rate for DRAFTING services (3D and 2D). Any engineering attracts a fee of $120 AUD/hour.

Mechanical Engineer with 7+ years of experience in mining, aviation, and metal fabrication industries. Skilled in project engineering, drafting, design, FEA analysis, cost estimation, resourcing, reve... Read more

Mechanical Engineer with 7+ years of experience in mining, aviation, and metal fabrication industries. Skilled in project engineering, drafting, design, FEA analysis, cost estimation, resourcing, reverse engineering, automating design process using illogic and VB.NET, and engineering deliverables. Technical Expertise • Drafting, Design & FEA: Autodesk Inventor, SolidWorks, AutoCAD • ERP Systems: Accentis, SAP • Reverse Engineering: 3D Scanning (FARO), CMMS, Point Cloud • Sheetmetal (CAD/CAM Nesting, Bending): SigmaNEST, Primecut, CADMAN-B, MasterCAM • Programming: - CNC (Fanuc, Okuma, Haas), VB.Net Programming for design automation • Productivity & Documentation: Microsoft 365 (Excel, Word, PowerPoint, Outlook) Recognized for attention to detail and the ability to streamline design workflows, ensuring efficient, accurate, and rapid modifications for repetitive or variant projects and experience managing projects from concept to completion.

Mechanical CAD specialist with hands‑on machining experience. Skilled in 3D modelling, reverse engineering, and producing accurate manufacturing drawings for CNC, fabrication, and mining components. I... Read more

Mechanical CAD specialist with hands‑on machining experience. Skilled in 3D modelling, reverse engineering, and producing accurate manufacturing drawings for CNC, fabrication, and mining components. I’ve completed projects ranging from small precision parts to full assemblies, always focusing on manufacturability and fast turnaround. Proficient in SolidWorks.

Mechanical draftsperson with over 5 years of professional experience in 3D modeling, detailing and photorealistic rendering, specialising in SolidWorks. From 2017 to 2022 I worked as a Civil/Mechanic... Read more

Mechanical draftsperson with over 5 years of professional experience in 3D modeling, detailing and photorealistic rendering, specialising in SolidWorks. From 2017 to 2022 I worked as a Civil/Mechanical Draftsperson at Prolucmar Projects and Services (Brazil), producing manufacturing drawings, assemblies and structural details for industrial projects. In parallel I taught SolidWorks as a Mechanical Design Instructor at a private technical college, which sharpened both my command of the software and my ability to communicate design intent clearly. Since 2023 I have worked as a freelance draftsperson. In 2026 I delivered contract mechanical rendering work for Drillcube in Perth, Australia. I am currently based in Perth and studying an Advanced Diploma in Civil Construction Design, which adds a civil and structural layer to my mechanical background. What I can deliver: - 3D parametric modeling of parts and assemblies (SolidWorks) - Manufacturing and shop drawings, GD&T, BOMs - Photorealistic product renders and exploded views - 2D drafting and documentation in AutoCAD - Civil and structural drafting (Revit / Civil 3D) - Reverse engineering from sketches, photos or physical samples I work to agreed deadlines, communicate in English and Portuguese, and turn revisions around quickly.

Hello! My name is Steven from Australia. I'm a professional 3D/CAD modeler and product designer. I have 10 years of experience working in 3D modelling and AutoCAD drafting. The services I offer inclu... Read more

Hello! My name is Steven from Australia. I'm a professional 3D/CAD modeler and product designer. I have 10 years of experience working in 3D modelling and AutoCAD drafting. The services I offer include: • 3D modelling (moldings, complicated parts, assemblies, whatever you want), based on your sketches, drawings, pictures or just fantastic ideas, using Solidworks, Autodesk Inventor or Fusion 360. • Creating set of manufacturing drawings based on 3D models/assemblies. • Creating flat patterns. • Converting STL files to solid models (STEP, IGS, X_T). • Creating STL, IGES and STEP files for 3D printing. • Creating DXF files for CNC/Laser/Plasma cutting. • 2D CAD drafting in AutoCAD (architectural and technical drawings, converting from pdf/images to AutoCAD). I accept offers that I'm certainly able to finish, so once you hire me - you won't just waste your time. Don't be afraid to contact me in chat - I'll answer all your questions. Kindly check my portfolio and feedback below. Best regards.

Mechanical Engineering design and drafting. SOLiDWORKS expert with reverse engineering experience and Manufacturing experience

Mechanical Engineering design and drafting. SOLiDWORKS expert with reverse engineering experience and Manufacturing experience

I am a Mechanical Engineer with over six years of industry experience. I began my career in a well-known automotive company as a reverse engineering designer before transitioning to the sheet metal ma... Read more

I am a Mechanical Engineer with over six years of industry experience. I began my career in a well-known automotive company as a reverse engineering designer before transitioning to the sheet metal manufacturing sector. Additionally, currently, I am pursuing a PhD, focusing on additive manufacturing (Selective Laser Melting) and hydrogen fuel cells.