Hire the best freelance R&D Design expert designers for your company

I love creating! I've been designing since I was little. I specialize in new products that take some good thought and creation. Everything I do I create in 3d because I like to be able to see the whol... Read more

I love creating! I've been designing since I was little. I specialize in new products that take some good thought and creation. Everything I do I create in 3d because I like to be able to see the whole project and be able to visualize from all sides. I have experience in the cycling industry designing parts as well as ski bikes and skis in the growing ski bike industry. I have experience in many different areas as well. Including but not limited to tools, building projects, remodels, furniture, toys, skate ramps and parks, bike trails and jumps, skis, scooters and of course bike parts and frames.

Passionate Mechanical Design Engineer Artisan. Senior R&D Designer, experienced in automotive mfg., marine technical training service, med-equipment startup company, and other customer services.

Passionate Mechanical Design Engineer Artisan. Senior R&D Designer, experienced in automotive mfg., marine technical training service, med-equipment startup company, and other customer services.

Hello, My name is Herman Ariwibowo, I am 31 years, I am R&D Designer Engineer in Indonesian Company. with quality export Product , Manufacturing Kitchen sets and equipment, I make design for produc... Read more

Hello, My name is Herman Ariwibowo, I am 31 years, I am R&D Designer Engineer in Indonesian Company. with quality export Product , Manufacturing Kitchen sets and equipment, I make design for production , Sheetmetal , panel , Assembling drawing and make Bill of Material. I am using software SOLIDWORK. AUTOCAD, and Autodesk Inventor more than 5 years. I am expert in 2D and 3D. I will give work the best for you. and Your satisfied is my Focus. Thanks Herman A

I am a Mechanical Technologist in Mississauga Canada with 20+ years experience in AutoCad, Fusion and GeoMagic, I am a fully qualified general machinist / mechanical technologist where I have complete... Read more

I am a Mechanical Technologist in Mississauga Canada with 20+ years experience in AutoCad, Fusion and GeoMagic, I am a fully qualified general machinist / mechanical technologist where I have completed many automation systems design and build assignments. I have worked in the manufacturing industry for many years which gives me an advantage in being able to see quickly what designs are practical and cost effective to fabricate. I have rapid prototyping capability using a variety of machine tools which are complimented by a variety of FFF printers. With the NDA constraints of being a freelance designer, I am unable to upload many of the more interesting designs I have completed. The ones shown here are either my own or are by permission.

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and... Read more

I am a chartered mechanical Engineer with experience in multi-discipline design and simulation across a range of industries including Nuclear, Oil & Gas, Rail, Civil & Structural, Renewable Energy and Moveable Structures. I can provide a focussed extension to your core team that will solve your companies’ problems including; • R&D • Design assessment and prototyping • Engineering drawings • Site surveys • Manufacturing management/improvement • Energy use and sustainability applications • And many more, just get in touch!

Over 20 years experience in mechanical engineering. Technical skills: cranes and lifting, material handling, shredding and crushing equipment, mechatronics, piping and valves, pressure equipment, mach... Read more

Over 20 years experience in mechanical engineering. Technical skills: cranes and lifting, material handling, shredding and crushing equipment, mechatronics, piping and valves, pressure equipment, machine design.

I am a mechanical engineer. I am really enjoying and good at cad software like solidworks,catia,fusion 360. Also, i can prepare FEM and flow simulations with ansys, solidworks flow simulation, hyperme... Read more

I am a mechanical engineer. I am really enjoying and good at cad software like solidworks,catia,fusion 360. Also, i can prepare FEM and flow simulations with ansys, solidworks flow simulation, hypermesh.

I am a CAD Engineer with expert command over SolidWorks, SiemensNX and Creo and an active presence in: automotive, pharmaceuticals and electronics. Currently I am focusing on design jobs for 3D printi... Read more

I am a CAD Engineer with expert command over SolidWorks, SiemensNX and Creo and an active presence in: automotive, pharmaceuticals and electronics. Currently I am focusing on design jobs for 3D printing and molds. I am ideal for designing: - hardware adapters for electronics - replacement for discontinued auto parts - silicone molds for resin parts -Any thing that you require

I am a Mechanical Engineer and backed by a team of enthusiastic engineers having extensive experience in working on versatile design projects. We are proficient in using Solidworks, Autocad, creo, Ans... Read more

I am a Mechanical Engineer and backed by a team of enthusiastic engineers having extensive experience in working on versatile design projects. We are proficient in using Solidworks, Autocad, creo, Ansys, and other related software and do realistic rendering in a key shot. We can design any kind of parts, products, assemblies. We believe in quality work and maintain excellence level. Following are the services we provide: 2D Drawings 2D PDF Drawings 3D Modeling 3D Designing 3D PDF models 3D Rendering 3D animation 3D Printing Part Modelling Surface Modeling Plastic Enclosure Renderings Product Design & Detailing Product Development Engineering Drawings Patent Drawings Sheet Metal Bending CNC router 3D file programming Laser Cutting Machine file programming CNC Bending Machine file programming

"Welcome to my profile! I am a dynamic and innovative Mechanical Design Engineer with a passion for CAD modeling and product development. With expertise in various software, including SolidWorks for C... Read more

"Welcome to my profile! I am a dynamic and innovative Mechanical Design Engineer with a passion for CAD modeling and product development. With expertise in various software, including SolidWorks for CAD, ANSYS for FEA & CFD, and Luxion KeyShot for high-quality realistic renderings, I bring creativity and precision to every project. My experience encompasses a wide range of industries, including industrial equipment design, consumer product development, and machine design. I excel in translating concepts into tangible designs, optimizing functionality, and ensuring manufacturability. As an expert in CAD modeling, I leverage cutting-edge techniques and advanced parametric design to deliver exceptional results. I am adept at creating realistic 3D renderings, conducting mechanical analysis, and producing accurate technical drawings. Collaboration and client satisfaction are at the core of my work ethic. I believe in open communication, closely understanding project requirements, and delivering high-quality solutions on time and within budget. I am committed to exceeding client expectations and ensuring a seamless design process from concept to completion. If you are seeking a skilled Mechanical Design Engineer with a focus on innovation, CAD modeling, and product development, I am here to bring your ideas to life. Let's collaborate on your next project and create outstanding designs together!" Feel free to contact me for your projects. Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒▒▒▒: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Working as a Design Engineer in Bursys InfoTech, Previously worked in MPLEOKIVISALO OY. Software uses Solidworks and Auto cad for Concept Design, Reverse engineering and 2D to 3D cad conversion.

Working as a Design Engineer in Bursys InfoTech, Previously worked in MPLEOKIVISALO OY. Software uses Solidworks and Auto cad for Concept Design, Reverse engineering and 2D to 3D cad conversion.

Mechanical Engineer at Øshênȁ for Projects and Industrial Services, CAD Instructor (AutoCAD - SolidWorks - Autodesk Inventor) Certified Autodesk Inventor Professional Certified SolidWorks Professi... Read more

Mechanical Engineer at Øshênȁ for Projects and Industrial Services, CAD Instructor (AutoCAD - SolidWorks - Autodesk Inventor) Certified Autodesk Inventor Professional Certified SolidWorks Professional, Also Certified Advanced SolidWorks Professional in Surface, Sheet Metal, Weldment, Mold Tools, Drawing Tools. CFD Analysis Specialist. CAM using EdgeCAM, Inventor HSM

I am a Mechanical Engineer and have my Bce. At the moment i work as a R&D Engineer so i have knowledge of materials and manufacturing processes. I have 5+ years experience with Solidworks, so i kn... Read more

I am a Mechanical Engineer and have my Bce. At the moment i work as a R&D Engineer so i have knowledge of materials and manufacturing processes. I have 5+ years experience with Solidworks, so i know all almost all ins and outs of this program.

R&D Design Engineer and Concept Artist with experience in mechanical design and product development. Skilled in Fusion 360, SolidWorks, and Blender, with hands-on experience in 3D modeling, wiring har... Read more

R&D Design Engineer and Concept Artist with experience in mechanical design and product development. Skilled in Fusion 360, SolidWorks, and Blender, with hands-on experience in 3D modeling, wiring harness design, prototyping, and custom product development.

Hello! I’m Muhammad Umar Khan, a CAD designer with nearly 4.5 years of experience specializing in AutoCAD and Autodesk Inventor. I have completed over 110 freelancing projects with a consistent 5-star... Read more

Hello! I’m Muhammad Umar Khan, a CAD designer with nearly 4.5 years of experience specializing in AutoCAD and Autodesk Inventor. I have completed over 110 freelancing projects with a consistent 5-star rating. Currently, I work remotely as a Mechanical Design Engineer at Chemted LLC, focusing on R&D, design drafting, and analysis for the oil and gas sector. I am proficient in SolidWorks, CATIA, Autodesk Fusion 360, and ANSYS. I hold a Mechanical Engineering Technology degree from The Superior University Lahore. I am committed to delivering high-quality results and look forward to collaborating on your projects!

I am a Mechanical Engineer that have more then 3 year of hand on experience in 2D/3D cad softwares , Product Design , Product Devlopment and Manufacturing . Presently i am working as a Senior design e... Read more

I am a Mechanical Engineer that have more then 3 year of hand on experience in 2D/3D cad softwares , Product Design , Product Devlopment and Manufacturing . Presently i am working as a Senior design engineer in a mnc company. i am providing high quality from this domains too 1:- Drawing and Technical data. 2:-Sheetmetal. 3:-Surfacing. 4:-Plastic Parts. 5:-Mold for plastic parts and logos. 6:-3d Modeling. 7:-Pipe Routing. 7:-CAD Software:- Solidworks ,Autocad/Autodesk , Creo/Promechanica and catia.

I am a mechanical Design engineer. Well experienced in variety of projects. I am here to find some Different work atmosphere and work experience. Designing Consumer products is my passion.... Read more

I am a mechanical Design engineer. Well experienced in variety of projects. I am here to find some Different work atmosphere and work experience. Designing Consumer products is my passion. I can do clear and professional machine shop drawings (2D Drawing) for each and every stage of your product whether it is new or Reverse engineered. I am also a 3d modeler, and can do any geometrical and Non-geometric Designs with the perfect 3D rendering with mechanical animation. I am passionate with the concept wise machine design, because it is challenging and the best way to explore my talents. Let’s work together and innovate something new.Don’t hesitate to give simple works. I can also do it to get a good contact with the best clients like you. Thank you.

BE Mechanical, 1997-2001 MS Mechatronics Engineering 2009-2011 PhD Mechanical Engineering 2014-2019

BE Mechanical, 1997-2001 MS Mechatronics Engineering 2009-2011 PhD Mechanical Engineering 2014-2019

Caution: I can make your ideas into Reality. The Dream: "You Have to Dream Before Your Dreams Come into Reality". I am your Oneirologist who has come to pave a Path to your Dream By providing a Reali... Read more

Caution: I can make your ideas into Reality. The Dream: "You Have to Dream Before Your Dreams Come into Reality". I am your Oneirologist who has come to pave a Path to your Dream By providing a Realistic Computer-Aided Design of your Dream Product. About me: Entrepreneur | Product Design Engineer | CAD Expert | Electric Vehicle Manufacturer | Communicative | Productive | Ethical | Punctual. Experience: 1. Founder / Director: A-Square Engineering Solutions • Activities: CAD Modeling, CAE, CFD, Product Design, Reverse Engineering. • Duration: 2017-Present • Projects Handled: 230+ 2. Co-Founder / Director / Lead Designer: Vision Innovative Products • Activities: Design, Manufacturing and Sales of Electric Vehicles. • Duration: 2019-Present • Projects Handled: 150+ What You can Ping me for: • Product Design and Development • New Product Design • CAD Modeling • GD & T • Generating Manufacturing Drawings • Design for Manufacturing • Design for Assembly • Content Writing • Academic Assignment Writing • Brainstorming ideas. • Process Planning • Business Planning My mode of Business: Customer Oriented | Communicative | Ethical | Enlighten. “The Future Belongs to Those who dare to Dream the Impossible”

Designer, Flow analyzer and plays chess well. :-) Program information and interests Solidworks Solidworks Flow Simulation AutoCAD Msc ADAMS Manufacturing R&D & Design

Designer, Flow analyzer and plays chess well. :-) Program information and interests Solidworks Solidworks Flow Simulation AutoCAD Msc ADAMS Manufacturing R&D & Design

Mechanical graduate & master in CAD/CAM with 1 year of experience in product design, Reverse Engineering, 3D modeling & 2D drafting using CAD softwares.

Mechanical graduate & master in CAD/CAM with 1 year of experience in product design, Reverse Engineering, 3D modeling & 2D drafting using CAD softwares.

An astute professional with rich Experience in Automotive wiring harness design and development.

An astute professional with rich Experience in Automotive wiring harness design and development.

I am a Mechanical Engineer who is capable with CAD designing. I have sound knowledge about Machine Designing and the Manufacturing Engineering with the theoretical and the practical experienced I gain... Read more

I am a Mechanical Engineer who is capable with CAD designing. I have sound knowledge about Machine Designing and the Manufacturing Engineering with the theoretical and the practical experienced I gained.

i am good performer

i am good performer

Automotive industry professional having 13 years of experience in design and development, innovative & result oriented professional with experience in project coordination leadership, DFMEA methodolog... Read more

Automotive industry professional having 13 years of experience in design and development, innovative & result oriented professional with experience in project coordination leadership, DFMEA methodologies. A self motivated team player who can easily adapt to any technological and business environment, excellent analytical and problem solving skills.

I am Parthiban, an experienced R&D Design Engineer with a strong passion for innovation and problem-solving. Specializing in mechanical design, CAD modeling, prototyping, and simulation, I work on tr... Read more

I am Parthiban, an experienced R&D Design Engineer with a strong passion for innovation and problem-solving. Specializing in mechanical design, CAD modeling, prototyping, and simulation, I work on transforming concepts into manufacturable solutions that push the boundaries of technology. With expertise in industry-standard tools like SolidWorks, Creo and ANSYS. I focus on creating high-performance, reliable designs that meet both functional and aesthetic requirements. I thrive on solving complex engineering challenges, optimizing designs, and ensuring manufacturability from the initial concept to the final product.

My name is Jacob Oestreich and I'm the Owner of Green University Engineering. We are a Fully Insured CAD, Drafting, and Design Services provider. I've been doing drafting and design work in one form o... Read more

My name is Jacob Oestreich and I'm the Owner of Green University Engineering. We are a Fully Insured CAD, Drafting, and Design Services provider. I've been doing drafting and design work in one form or another for around 7 years. I have experience in many industries including concrete, architecture, metal fabrication, foundry, heavy equipment, marine, agricultural equipment, glazing, aerospace, military, paper, manufacturing, and machining. I've worked on everything from single parts, to 10,000 plus component assemblies. I've done everything from welding to managing a large prototype design company. I'm currently in pursuit of growing my business. My business philosophy breaks down to Quality being of the utmost importance. If the customer isn't getting the product that they are paying for, I'm not doing my job. As of now I will be offering my Services FREE of Charge if Quality requirements are not met. What I mean by this is, before embarking on any project, quality requirements and lead-time will be laid out in detail before any contract is activated. Once both parties agree on quality definitions and lead-times, a contract will be written up guaranteeing the work is completed within the defined requirements or services will be provided for free (if the requirements are not met, services completed up to that point will be given to the customer free of charge). I believe strongly in providing customers with what they are asking for. This may require layouts, previews of planned work, and extensively defining what is required previous to project kick-offs. I will do my best to set realistic expectations as far as lead-times go. I will also provide updates daily or weekly on the progress of each project and provide gantt charts if the customer desires. Thank you in advance for your inquiry and I look forward to doing business with you. Owner - Green University Engineering Fully Insured Services Provider Jacob Oestreich