Hire the best Photometric Calculations experts for your company

Interior Designer specializing in high-end residential — from space planning and FF&E through construction documents and installation. Most designers do one side well. I design and I produce the tec... Read more

Interior Designer specializing in high-end residential — from space planning and FF&E through construction documents and installation. Most designers do one side well. I design and I produce the technical set that gets the design built. Over 6+ years I've taken residential and commercial interiors from first brief to final install: space planning, material and finish selection, FF&E, custom millwork, and lighting integrated from the first concept rather than bolted on at the end. High-end residential is where I do my best work. My edge is the technical floor under the design. I read a construction set, catch what fails on site before it does, and speak the language of the architects, contractors, and consultants I coordinate with — because I've produced that work myself. Complete drawing sets: floor plans, wall elevations, reflected ceiling plans, finish schedules, and millwork shop drawings detailed enough for direct fabrication. That's the gap on most teams — someone who designs beautifully but can't document for execution, or documents cleanly but can't design. I co-founded and ran a full-service interior design and architecture studio, delivering 150+ residential and commercial projects end to end — owning design alongside client relationships, timelines, and site coordination. I currently lead a six-person design team and technical documentation at a specialized design firm. An architect's rigor applied to interiors: buildability, spatial logic, and drawings that cut RFIs and on-site errors. I work independently, thrive async, and take full ownership of a scope from brief to delivery. Fluent in AutoCAD, SketchUp + Layout, Enscape, and Dialux Evo. Working knowledge of U.S. standards — IES footcandle guidelines, ADA, and IBC. Revit in progress. Available for remote collaboration → ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Hi, I’m Amir Latif. I’m a BIM and MEP Engineer with more than 7 years of experience in electrical systems. I design power and lighting solutions for residential, commercial, and industrial projects.... Read more

Hi, I’m Amir Latif. I’m a BIM and MEP Engineer with more than 7 years of experience in electrical systems. I design power and lighting solutions for residential, commercial, and industrial projects. I work with tools like AutoCAD, Revit, Navisworks, ETAP, AGI32, and Dialux evo, and I follow international codes and standards to make sure every project is safe, efficient, and reliable. If you need professional electrical or lighting design, I’m here to help. Let’s collaborate and bring your project to life!

Dear Sir / Madame, I hope this message finds you well. My name is Anju Varghese, and I am a Lighting Designer with a strong technical background in Presentation, product selection, sustainability sta... Read more

Dear Sir / Madame, I hope this message finds you well. My name is Anju Varghese, and I am a Lighting Designer with a strong technical background in Presentation, product selection, sustainability standards, and lighting calculations. I specialize in layout planning and markups, Dialux renderings, and dark sky compliance, with a focus on delivering energy-efficient and visually compelling lighting solutions. I am reaching out to express my interest in exploring potential opportunities within your company. I’ve attached my CV and portfolio for your review, which showcase a range of projects that reflect both technical expertise and creative design thinking. I would be grateful for the chance to discuss how I could contribute to your team and support your projects with thoughtful, performance-driven lighting design. Thank you for your time and consideration. I look forward to the possibility of connecting with you. Warm regards, Anju Varghese Lighting Designer - Technical 📞 ▒▒▒▒▒▒▒▒▒▒▒▒▒▒ 📧 ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

With a Master's degree in Architectural Lighting Design from New York School of Interior Design and currently working as a full time lighting designer and applications specialist with GVA Lighting in... Read more

With a Master's degree in Architectural Lighting Design from New York School of Interior Design and currently working as a full time lighting designer and applications specialist with GVA Lighting in Mississauga, Ontario - Canada, I feel immensely comfortable with producing 'architectural lighting design ideas', 'lighting layouts using AutoCAD and Revit' and 'photometric(lighting) calculations/renderings using AGi32' for various spaces and formats including Horticulture Lighting Calculations. Selected projects include Time Warner, Capital One, Microsoft, Bristol Myers Squibb, Simon Group, Residence Inn & Mercedes Benz. Previous work experience includes working for Bliss Fasman Inc., a very well know architectural lighting design firm in New York.

▪ Electrical and Mechanical Design Engineer on island residential buildings projects. (Luxury buildings, renovations) ▪ Project manager's assistant. Filling timesheets and day-by-day work management... Read more

▪ Electrical and Mechanical Design Engineer on island residential buildings projects. (Luxury buildings, renovations) ▪ Project manager's assistant. Filling timesheets and day-by-day work management. Visits on field and coordination with the contractors. ▪ Quantity surveyor. Coordination with the HVAC, electrical materials and equipment suppliers. ▪ Underfloor heating/cooling, Fan Coil Units, VRV systems sizing, and installation supervisor. ▪ MEP systems Cost estimation. ▪ Swimming pool mep designer ▪ European codes knowledge --------------------------------------- ▪ Electrical MEP Design Engineer using REVIT and AutoCad 2D software ▪ Multifamily projects Technical Study and Design ▪ Technical Study on buildings' Energy efficiency using COMCheck software ▪ USA National Electrical Code knowledge ▪ NFPA knowledge (fire alarm and emergency lighting, smoke and carbon detecting systems design) ▪ Coordination with Architects, Project Managers, Local Authorities ▪ Working on projects based on USA structural sector ▪ Site Lighting design, Photometric studies (Visual Software) ▪ Lighting and power layout design (Interior and Exterior), One-line and Multi-Line diagrams, Electrical panels design, Motors sizing, ▪ Breaker and Feeder cables Sizing ▪ Fire Pumps, Diezel Fire Pumps, Generators, Interior transformers design and sizing using Product cutsheets. ▪ Shop Drawing and Request for Information responses ▪ CCTV and Telephone risers design and knowledge

I have over 12 years of experience as an electrical consulting engineer working on a variety of building types. I obtained an Architectural Engineering Degree from the University of Colorado in 2005.... Read more

I have over 12 years of experience as an electrical consulting engineer working on a variety of building types. I obtained an Architectural Engineering Degree from the University of Colorado in 2005. Designed large facilities for Smithgroup Architecture in Phoenix, AZ from 2006-2012 and Henderson Engineers from 2012 - 2018. I have started my own firm Optimized Lighting Engineering and Design and am skilled in both 3D and 2D electrical design. I am licensed in Arizona and soon in California as a professional engineer.

I have been working as a lighting design engineer for 13 years, proficient in AGi32, having worked on projects in the US, Australia, NZ, Middle East and Europe. Lighting projects I have worked range f... Read more

I have been working as a lighting design engineer for 13 years, proficient in AGi32, having worked on projects in the US, Australia, NZ, Middle East and Europe. Lighting projects I have worked range from residential, industrial, retail, commercial, sports lighting projects for interior and exterior lighting of wide range of complexities. - Quick turnarounds - same day turnaround possible - Lighting reports with renders, photometric calculations, Google Earth overlays, lighting layouts

Senior architectural and urban lighting designer with 20+ years of experience across interiors, architectural exteriors, public realm and urban projects. I work on lighting concepts, photometric calcu... Read more

Senior architectural and urban lighting designer with 20+ years of experience across interiors, architectural exteriors, public realm and urban projects. I work on lighting concepts, photometric calculations, fixture selection, specifications, technical documentation and senior design review. Available for remote project-based support, overflow capacity and deadline-driven lighting packages.

CAD Crowd Profile Biography – German Hernandez Senior Electrical Drafting Designer | CAD Drafting Specialist | NEC/CEC Compliance Expert I am a highly skilled Senior Electrical Drafting Designer with... Read more

CAD Crowd Profile Biography – German Hernandez Senior Electrical Drafting Designer | CAD Drafting Specialist | NEC/CEC Compliance Expert I am a highly skilled Senior Electrical Drafting Designer with over 25 years of experience in electrical engineering design and CAD drafting, with a strong focus on power distribution, lighting design, and renewable energy systems for commercial, residential, industrial, and utility-scale projects. My background includes extensive work across Southern California, delivering code-compliant and permit-ready electrical plans for city jurisdictions and major utility agencies such as the Los Angeles Department of Water and Power (LADWP), Southern California Edison (SCE), and Pacific Gas and Electric (PG&E). I have led and supported numerous projects involving Electric Vehicle Charging Stations (EVCS), Battery Energy Storage Systems (BESS), photovoltaic (solar PV) systems, service switchgear upgrades, and the development of panelboard schedules. My work often includes short circuit analysis and load summary calculations, with strict compliance to NEC requirements, California Energy Code (Title 24), and individual utility standards. With a proven ability to coordinate with engineers, architects, and permitting authorities, I take pride in producing accurate, efficient, and well-organized drafting deliverables that support successful construction and approvals.

AutoCAD: Experience in AutoCAD drafting, preparing accurate layouts, plans, and technical drawings. AGi32: Experience in AGi32 photometric analysis, lighting calculations, and professional reports.

AutoCAD: Experience in AutoCAD drafting, preparing accurate layouts, plans, and technical drawings. AGi32: Experience in AGi32 photometric analysis, lighting calculations, and professional reports.

I am an MEP Electrical Design Engineer with over 4 years of experience delivering electrical design and drafting solutions for commercial, retail, hospitality, healthcare, and industrial projects. I s... Read more

I am an MEP Electrical Design Engineer with over 4 years of experience delivering electrical design and drafting solutions for commercial, retail, hospitality, healthcare, and industrial projects. I specialize in producing accurate, code-compliant construction drawings using AutoCAD and Revit MEP for projects following NEC, California Title 24, ComCheck report, IECC, and ASHRAE standards. My services include: • Electrical Power Layouts • Lighting Layouts & Photometric Calculations • Single Line Diagrams (SLD) • Panel Schedules & Load Calculations • Voltage Drop & Feeder Sizing • Circuiting & Equipment Connections • Electrical Room Layouts • Revit MEP Modeling • AutoCAD Drafting & CAD Standards Cleanup • Construction Documentation I focus on delivering high-quality drawings with attention to detail, timely communication, and reliable project support.

I am a detail-oriented Electrical Engineer specializing in comprehensive MEP design and drafting for residential and commercial projects across the USA, Canada, and the UAE. My approach combines techn... Read more

I am a detail-oriented Electrical Engineer specializing in comprehensive MEP design and drafting for residential and commercial projects across the USA, Canada, and the UAE. My approach combines technical engineering accuracy with high-speed CAD/BIM production. I specialize in creating fully coordinated construction documents where electrical systems work in harmony with mechanical and plumbing constraints. From complex load calculations and panel schedules to specialized Title 24 compliance and Emergency Photometric layouts, I ensure every drawing is permit-ready and code-compliant. Core Expertise: Design: Load calculations, lighting & power layouts, and life safety systems. Drafting: High-precision 2D AutoCAD drafting and 3D Revit MEP modeling. Coordination: Interdisciplinary clash detection (Mechanical/Plumbing/Structural). Compliance: Title 24 (California Energy Code), NEC, and CEC standards. Whether you need a quick Drafting, Load calculations, Single Line Diagram (SLD) or a full BIM model for a commercial complex, I deliver clean, organized, and technically sound files tailored to your project’s regional requirements.

Expert in Lighting Design and Management | 18 years of experience in Prescription/Architectural Design and Lighting Office Welcome to my profile! I am a lighting specialist, passionate and experience... Read more

Expert in Lighting Design and Management | 18 years of experience in Prescription/Architectural Design and Lighting Office Welcome to my profile! I am a lighting specialist, passionate and experienced, with a solid background in lighting design, photometry, and lighting consulting. With experience in large companies in the lighting sector, I have acquired in-depth expertise in project management, training, and creating lighting ambiances for prestigious projects. Why collaborate with me? I am convinced that light can transform a space and enhance an architecture. Whether for lighting or functional lighting such as sports, tertiary or residential, I make it a point of honor to create personalized and efficient solutions that meet the aesthetic, technical and environmental requirements of each project. My fields of activity are eclectic: Sports, tertiary, Residential, Public Lighting, Urban Lighting, Industrial, Museography, Scenography, Architectural Lighting What I offer: Design and photometric study: I ​​carry out precise studies and photometric simulations (DIALux, Relux) to guarantee optimal lighting and comply with current standards. 2D Computer Graphics Simulation (Photoshop, etc.) allowing visualization of architectural lighting. Some notable achievements: Luxury Hotels in Courchevel, Val d’Isère, Tignes, Chamonix, Megève... The Louvre in Abu Dhabi and the Musée des Confluences - Lyon Notre Dame de Paris (Anamorphosis of the stained glass windows), Tour Saint-Jacques (Paris), Zénith de Nantes, Food Society La Part-Dieu Working with me means benefiting from advanced technical expertise and an artistic vision that will bring your spaces to life. Contact me to discuss your project, and let's see together how to enhance your architecture with light.

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

Hi I'm a lighting design engineer with hands-on experience on 100+ projects using DIALux Evo (residential, commercial, industrial, and outdoor lighting).

Hi I'm a lighting design engineer with hands-on experience on 100+ projects using DIALux Evo (residential, commercial, industrial, and outdoor lighting).

Been working on many professional mechanical designing programs (Solidworks & AutoCAD). EDUCATION AND TRAINING: 1. Studying at zewail university of science and technology From 2014... Read more

Been working on many professional mechanical designing programs (Solidworks & AutoCAD). EDUCATION AND TRAINING: 1. Studying at zewail university of science and technology From 2014 till now PERSONAL SKILLS: 1. Languages: • Arabic ( Mother tongue ) • English ( listening – reading – speaking – writing ) fair • German (poor and still learning ) 2. Computer skills: • Excellent at windows & ICDL ( Word – PowerPoint – Excel ) • Professional at computer designing program ( Solidworks) • Fair at computer designing program ( AutoCAD) • Good at Animation & designing program ( Maya – 3D Max) • Good at basic programming ( Visual basic - matlab) • Good at web designing ( web expression ) 3. Communication skills: • Good communication skills gained through my experience through working in many team work in projects at the university Funding and Academic Awards: • I have a full scholarship at Zewail University of science and technology for 5 years Conferences and courses: • Participating at the Annual scientific conference for undergraduate students as organizer for the Year 2014.

Proficient with 2D and 3D CAD design for manufacturing and rendering in the field of mechanical, aerospace and manufacturing engineering

Proficient with 2D and 3D CAD design for manufacturing and rendering in the field of mechanical, aerospace and manufacturing engineering

I have a team Equipment Design Industrial CAD designer for ongoing 2D drafting & 3D model. We need a part-time 2D & 3D model to help with an ongoing 2D & 3D model for your requirement, products and... Read more

I have a team Equipment Design Industrial CAD designer for ongoing 2D drafting & 3D model. We need a part-time 2D & 3D model to help with an ongoing 2D & 3D model for your requirement, products and other part design. The work will involve taking equipment, products, castings, fabrication product for manufacturing for your company and converting them into photorealistic 3D model and 2D drafting for your company. The AutoCAD & 3d's Solid work should be highly skilled with 2D drafting and 3D model and marvelous Designer software.

Mechanical design specialist with 15 years of progressive responsibility in engineered products, industrial equipment, and advanced fabrication environments. I bring a unique combination of hands-on m... Read more

Mechanical design specialist with 15 years of progressive responsibility in engineered products, industrial equipment, and advanced fabrication environments. I bring a unique combination of hands-on manufacturing experience, deep CAD capability, and executive-level decision-making from serving as President of a high-mix, high-complexity manufacturing company. My work spans full product lifecycle delivery, from concept modelling through production drawings, BOM structures, prototype validation, and manufacturability optimization. My core strength is translating real-world production requirements into clean, reliable, fabrication-ready mechanical designs. I have designed thousands of assemblies, weldments, machined components, sheet metal parts, and hydraulic/electrical systems used in demanding industrial and mobile equipment applications. Years of close collaboration with welders, machinists, fabricators, and field technicians ensures that my models are practical, intuitive, and production-ready on the first release. I work extensively with Autodesk Inventor and AutoCAD, including sheet metal parts, weldments, 2D drawings, and the full use of all features within the software. My deliverables include detailed manufacturing drawings, exploded views, weldment drawings, cut lists, BOMs, assembly instructions, and design packages suitable for fabrication, machining, laser cutting, and contract manufacturing. My focus is on production ready designs that work the first time. Leadership roles have added significant value to my approach. As President and engineering lead in a 50-person organization, I oversaw engineering teams, design standards, PDM systems, product development pipelines, process improvement initiatives, and cost-reduction projects. This gives me strong commercial awareness: I design for cost, speed, repeatability, and long-term maintainability. I understand how design decisions affect throughput, margins, and the total cost of ownership. Key capabilities include mechanical design, sheet metal and weldment modeling, hydraulic system integration, custom industrial equipment design, fixture and tooling development, and production engineering. I have delivered engineering work in multiple product domains: truck bodies, service vehicles, cranes, industrial tooling, structural frames, custom material-handling equipment, and commercial fabrication projects. My portfolio includes new product development, re-engineering for cost efficiency, reverse engineering of existing equipment, and modernization of legacy designs. Education includes a Bachelor of Business Administration and three semesters of mechanical engineering, supplemented by years of technical and leadership training. I bring a disciplined, quality-driven approach reinforced by both technical depth and business-level accountability. Clients can expect precise modeling, clear communication, high reliability, and work that is optimized for real-world production constraints. I deliver professional-grade design packages that reduce fabrication errors, shorten build times, and support commercial growth.

I am a Mechanical Engineer with 13 years of experience in SolidWorks CAD and 3D modeling. I create accurate 3D models, assemblies, and detailed part drawings ready for manufacturing.

I am a Mechanical Engineer with 13 years of experience in SolidWorks CAD and 3D modeling. I create accurate 3D models, assemblies, and detailed part drawings ready for manufacturing.

We are a multinational architecture and estimation consultancy providing end-to-end services including 2D & 3D floor plans, AutoCAD drafting, Xactimate sketches, insurance estimates, and PlanSwift qua... Read more

We are a multinational architecture and estimation consultancy providing end-to-end services including 2D & 3D floor plans, AutoCAD drafting, Xactimate sketches, insurance estimates, and PlanSwift quantity takeoffs. With a team of 100+ certified experts, we ensure high-quality, code-compliant deliverables with fast 24-hour turnaround to meet global industry standards. ✅ Serving USA, Canada, UK, Australia ✅ Residential, Commercial & Industrial Projects ✅ 99.9% Accuracy | Affordable Pricing | Unlimited Revisions ✅ Scalable Workforce Ready for Bulk & Urgent Projects Whether you need architectural plans or insurance estimates, we deliver excellence with speed and precision helping you win more projects and close claims faster. 📞 Contact us today to get started and experience world-class service!

To obtain a Solidworks Designer position in the field of sales with a company where I can optimize my acquired expertise and marketing experience to produce sales growth and increase company profits.... Read more

To obtain a Solidworks Designer position in the field of sales with a company where I can optimize my acquired expertise and marketing experience to produce sales growth and increase company profits. Desire a position with career growth potential

Mechatronics engineering. Mechanical engineering and CAD specialist. Part modeling, machine and electro-mechanical system design. Gadget design and programming. Cnc machine design(mills, automatic... Read more

Mechatronics engineering. Mechanical engineering and CAD specialist. Part modeling, machine and electro-mechanical system design. Gadget design and programming. Cnc machine design(mills, automatic welders, drills, plotters, 3D printing, lathes) Convert pdf, jpg to technical drawings and 3D models. I am actively programming microcontrollers for the past 5 years(c, c++, java, python). PLC programming and automatisation. I have been an active member of some national projects: Montenegrin Wearable Robots Formula Student Montenegrin Autonomous Vehicles In these projects my role was designing electro-mechanical systems, 3D/2D/tehnical drawing, microcontroller programming.. My finishing project on faculty was cnc plotter machine, with A3 format of drawing/writing. Currently, I am working on 5 axis cnc metal milling machine for my master thesis.

Experienced Freelance Jewelry Rendering and Animation Designer Specializing in High-Quality, Realistic Visuals for Marketing and Product Development.

Experienced Freelance Jewelry Rendering and Animation Designer Specializing in High-Quality, Realistic Visuals for Marketing and Product Development.

Mechanical and structural draughtsman with nearly 20 years of experience producing accurate 3D CAD models, detailing and fabrication drawings, including 13 years as head draughtsman running a drawing... Read more

Mechanical and structural draughtsman with nearly 20 years of experience producing accurate 3D CAD models, detailing and fabrication drawings, including 13 years as head draughtsman running a drawing office for a process machinery manufacturer. As director of Free Tech Drafting (Meyerton, South Africa), I turn concepts, sketches, paper drawings and existing parts into production-ready drawings for manufacturing, fabrication and 3D printing. What I do: • 3D modelling and assemblies in SolidWorks and Autodesk Inventor (fully licensed) • 2D drafting in AutoCAD, including paper-to-CAD conversion • Fabrication, machine and isometric drawings • Reverse engineering and 2D-to-3D conversion • Mineral processing equipment, plant layouts, chutes and structural steelwork • STL and DXF files for 3D printing and laser/plasma cutting I focus on drawings that are right the first time, clear communication and on-time delivery at a cost-effective rate.