Hire the best freelance Mechanical Seals expert designers for your company

• 16 Years of full-time, professional experience as a mechanical engineer. • Proficiency with Onshape, SolidWorks, Creo, and a variety of other 3D CAD programs (Onshape preferred). • Clarkson Universi... Read more

• 16 Years of full-time, professional experience as a mechanical engineer. • Proficiency with Onshape, SolidWorks, Creo, and a variety of other 3D CAD programs (Onshape preferred). • Clarkson University graduate (B.S. Mechanical Engineering, 2009) • Reside in NY State.

Born In Elmira, N.Y. Married with 5 children. Since graduating from college, have lived in Burlington, VT. Love family life, hiking, boating, X-C Skiing, basketball and Tennis! Very creative perso... Read more

Born In Elmira, N.Y. Married with 5 children. Since graduating from college, have lived in Burlington, VT. Love family life, hiking, boating, X-C Skiing, basketball and Tennis! Very creative personality having ownership of existing patent with several ideas for potential patents. Started as CAD Designer for GE Armaments in tooling and Gaging and Test equipment then worked on product design for High Speed Weapons and Machinery (7yrs). Spent next 8 years designing parts and equipment for Canned Motors and Pumps. Currently working for Mechanical Seal Company (23yrs) developing new designs and equipment including patent for rotating devices.

I am Design and development engineer and working in Mechanical industry from 5 Years. I have good knowledge of materials selection, Manufacturing process and design optimization. Supports developme... Read more

I am Design and development engineer and working in Mechanical industry from 5 Years. I have good knowledge of materials selection, Manufacturing process and design optimization. Supports development activities and Value Engineering for product cost optimization.

Mechanical Engineer with 18 years experience innovating electromechanical solutions in start-up and fortune 500 companies in the oil & gas, mining, modular construction, renewables & consumer product... Read more

Mechanical Engineer with 18 years experience innovating electromechanical solutions in start-up and fortune 500 companies in the oil & gas, mining, modular construction, renewables & consumer product markets. Conceptualized and managed full life cycle programs ranging from $2 million to $10 million in budget. Core competencies include Engineering Design, Analysis, Project Management, Team Management, Prototyping, Testing, and Intellectual Property Creation.

Having experience in designing of Special purpose machines as well as designing of mechanical seals for ASME, ANSI pumps with API standards.

Having experience in designing of Special purpose machines as well as designing of mechanical seals for ASME, ANSI pumps with API standards.

Design of Mechanical Seals Using AutoCAD and SolidWorks Execution of various projects related to the design of industrial components for refineries and oil and gas petrochemical plants. Execution of... Read more

Design of Mechanical Seals Using AutoCAD and SolidWorks Execution of various projects related to the design of industrial components for refineries and oil and gas petrochemical plants. Execution of projects related to the design of components for various factories, including food and pharmaceutical factories.

Experienced Design Engineer with a demonstrated history of working in the mechanical or industrial engineering industry. Skilled in AutoCAD, Solid edge, SolidWorks, Industrial Engineering. experience... Read more

Experienced Design Engineer with a demonstrated history of working in the mechanical or industrial engineering industry. Skilled in AutoCAD, Solid edge, SolidWorks, Industrial Engineering. experience in oil and gas, food and pharmaceutical, plastic,3d printing, Mechanical seals Design

A Design Engineer with 14 years of experience in Design, Product Development, Automation, Solid edge, Solid works, Pro-E. Worked with various Mechanical industries in the field of Fabrication, SPM des... Read more

A Design Engineer with 14 years of experience in Design, Product Development, Automation, Solid edge, Solid works, Pro-E. Worked with various Mechanical industries in the field of Fabrication, SPM design, Mechanical seals and oil and coolant filtration systems. visit www.mechaligenceindia.in

Mechanical Engineer with 3+ years of experience handling complete technical order execution and design responsibilities for clients across industries including marine, oil & gas, power, and defense. P... Read more

Mechanical Engineer with 3+ years of experience handling complete technical order execution and design responsibilities for clients across industries including marine, oil & gas, power, and defense. Proficient in designing rotating equipment like mechanical seals, shafts, and sleeves using SolidWorks, AutoCAD, and Ansys. Strong expertise in working in the project of Indian Navy like for Mazagaon Dock shipbuilders Ltd (MDL) and Garden Reach Shipbuilder and Engineers Ltd (GRSE), OEMs such as Sulzer Saudi Pump Co and ITT Saudi Inc, with exposure to international project coordination, documentation, and vendor management. Skilled in reading P&IDs, preparing BOMs, reverse engineering, and ensuring technical compliance.

With over 30 years of experience in structural, mechanical, and civil design. I am a highly skilled Senior Draughtsman and 3D Modeller specialising in mining, industrial, and construction projects. I... Read more

With over 30 years of experience in structural, mechanical, and civil design. I am a highly skilled Senior Draughtsman and 3D Modeller specialising in mining, industrial, and construction projects. I bring a deep understanding of design standards, modelling techniques, and fabrication processes, consistently delivering detailed 2D drawings and advanced 3D models that align with complex engineering specifications. My background spans mechanical seals, hydraulic systems, electric arc furnaces, structural supports, and ore handling infrastructure across Southern Africa and abroad. Proficient in AutoCAD, Solid Edge, SolidWorks, Inventor, Navisworks and Vault. I’ve led design efforts from concept through to fabrication and commissioning. I possess strong interpersonal and leadership abilities, enabling effective coordination with multidisciplinary teams, project stakeholders, and clients. My organisational skills, attention to detail, and technical insight ensure the timely and precise delivery of high-quality engineering documentation across all project phases

I am a mechanical design engineer with 13 years experience using PTC proE Creo. For over a decade I have provided engineering services, 2d/3d cad modeling, drafting, GD&T, research & development, and... Read more

I am a mechanical design engineer with 13 years experience using PTC proE Creo. For over a decade I have provided engineering services, 2d/3d cad modeling, drafting, GD&T, research & development, and new product development for large companies like Caterpillar, Komatsu and Oshkosh. I’ve developed new designs for mining truck cabs which included cab doors, plastic panels, sheet metal components, brackets, ROPS, rubber seals and other cab components. Other designs include suspension components for military vehicles, surface modeling, plastic design, castings, sheet metal design and more.

I'm a mechanical engineer graduated in Italy with 10 years of experience in mechanical design of automatic machines, form CNC machine to press for hot forgings. I'm able to do FEM analysis and draftin... Read more

I'm a mechanical engineer graduated in Italy with 10 years of experience in mechanical design of automatic machines, form CNC machine to press for hot forgings. I'm able to do FEM analysis and drafting fabbrication with dimensional and geometrical tollerances. I can design an automatic machine with pneumatics and hydraulic system. I can help you to get the best solution about mechanical design. I can also dimensioning bearings based on the load applicated, linear guides, balls and rollers screws, seals for pneumatic or hydraulic applications, plain bearings and other.

I am a graduated mechanical engineer, I have experience in development of machine's and component's design, and in machine maintenance and projetcs management. I have worked during five years in a mul... Read more

I am a graduated mechanical engineer, I have experience in development of machine's and component's design, and in machine maintenance and projetcs management. I have worked during five years in a multinacional company, been responsable for the maintenance mechanical projects department. I have great experience in dimensioning of mechanical parts, mechanical drawings for manufacturing and calculation and determination of comercial componentes, like roller bearings, seals, linear guides, manufacturing materials and heat and chemical treatment.

Insight : 5+ years of CAD Design (CATIA V5, 3DX & Fusion 360). 3+ years spent on the airframe structure design (AIRBUS) 7+ CAD training courses created on volumic/surfacic/kinematic and kinetic modul... Read more

Insight : 5+ years of CAD Design (CATIA V5, 3DX & Fusion 360). 3+ years spent on the airframe structure design (AIRBUS) 7+ CAD training courses created on volumic/surfacic/kinematic and kinetic modules (3DExperience) -> given to senior mechanical engineers (avg of 15y of experience) Education : - Mechanical engineer degree - Technician degree in mechanical engineering Highlighted projects : - A321 next gen modular floor (Design in complicance with standards) - Door seals for ATR (complex surfacic to volumic design) - CAD Checklist data analysis program (Quality & Safety field, 2 main root causes found). Results increased. - TETR'ISS : Scientific experiment sent aboard the ISS in 2019. - RedBull SoapBox Race 2024. 2nd rank, in front of 20k people. I learnt to "design as you manufacture". A critical design technique that forces you to think as CNC machine starting from raw.

Mechanical design engineer with hands-on experience in automotive components, mechanical assemblies, and manufacturing-driven design. I combine practical workshop knowledge with strong CAD and enginee... Read more

Mechanical design engineer with hands-on experience in automotive components, mechanical assemblies, and manufacturing-driven design. I combine practical workshop knowledge with strong CAD and engineering analysis to deliver solutions that work reliably in real-world conditions. My experience includes designing and improving mechanical systems, performing FEA stress analysis, selecting appropriate alloys and materials, and optimizing parts for strength, weight, and manufacturability. I’m comfortable working with industry standards and supplier databases to specify bearings, oil seals, fasteners, and other components with accurate dimensions, availability, and cost considerations. Having worked as a mechanic from a young age, I bring a practical understanding of how machines are built, assembled, and serviced. I’m known for quickly understanding technical problems and developing efficient, robust solutions. I can support projects from concept through refinement, always focusing on functionality, simplicity, and engineering clarity.

I possess nearly 20 years successful experience as a Manufacturing Engineer with experience in a diverse set of disciplines including but not limited to Aerospace Manufacturing Process development, Pr... Read more

I possess nearly 20 years successful experience as a Manufacturing Engineer with experience in a diverse set of disciplines including but not limited to Aerospace Manufacturing Process development, Project management, research and development of various hydraulic and pneumatic valves and seals, airfoil manufacturing, new product design, multi-axis cnc programming using Mastercam 2017 and NX11, Fixture design, 3D modelling using solidworks, tool and die making with a focus on progressive stamping and roll design, precision grinding, multi-axis swiss style screw machine programming and the capacity to set-up and program virtually any machine in the precision manufacturing industry. I have nearly 20 years experience in aerospace manufacturing with knowledge of engineering quality management systems and first article approval processes such as CIPT, DFMEA, PFMEA, QAD, and PPAP. I am seeking to become a contracted independent manufacturing process engineer with the capacity to help with turn key manufacturing solutions that would include on-site training and CNC set-up. I am confident that my successful manufacturing engineering and process development would be an efficient and cost effective solution to all your design and engineering needs. Please feel free to contact me with any questions you may have or any scale project you may need help with.

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

I am Kimia Nikkhah, an Architectural Engineer specializing in BIM modeling, Revit, and architectural design. With over 6 years of experience, I develop detailed 3D BIM models, construction documentati... Read more

I am Kimia Nikkhah, an Architectural Engineer specializing in BIM modeling, Revit, and architectural design. With over 6 years of experience, I develop detailed 3D BIM models, construction documentation, and coordinate multi-disciplinary engineering projects. I am highly skilled in Revit, AutoCAD, and cloud-based collaborative workflows, including creating and managing Revit Families to ensure precise and efficient design delivery. I have contributed to diverse projects such as residential complexes, public buildings, industrial facilities, ports, and office structures. I bring strong technical skills, meticulous attention to detail, and the ability to collaborate effectively across teams and time zones. I am passionate about delivering high-quality BIM solutions that support sustainable, impactful projects. Education: Master’s in Architectural Engineering, GPA 3.95 I have contributed to diverse projects such as residential complexes, public buildings, industrial facilities, ports, and office structures. I bring strong technical skills, meticulous attention to detail, and the ability to collaborate effectively across teams and time zones. I am passionate about delivering high-quality BIM solutions that support sustainable, impactful projects. Education: Master’s in Architectural Engineering, GPA 3.95

Hi, I am a Mechanical design engineer having 7 years of experience using Autocad and Creo. I have completed a number of design projects on Autocad as well as Creo so have good hands on the same. In th... Read more

Hi, I am a Mechanical design engineer having 7 years of experience using Autocad and Creo. I have completed a number of design projects on Autocad as well as Creo so have good hands on the same. In the past I have completed a number of many types of projects. I ensure you will not get disappointed to working with me. I will provide you best solution with your requirement.

I am a reinforced concrete consultant. With over 27 years experience in the field. I have worked on Small residential projects, helping both the contractor and home owner with their projects. Making t... Read more

I am a reinforced concrete consultant. With over 27 years experience in the field. I have worked on Small residential projects, helping both the contractor and home owner with their projects. Making them safe and economical. I have worked on large industrial projects for the likes of SABMiller, Acelor MITAll, LDA Lubango. Both local to area residential and international in countries like Nigeria and Angola. Dealing with all aspects of the project at hand, from liaising with equipment suppliers in Germany, to negotiating and supplying design details with steel suppliers in India. I have the experience and knowledge to get your RCC design work done expediently, safely on time.

Edin Tarakčija - Mechanical engineer from BiH - A lot of experience in production and manufacturing (departments: Technology and development, mechanical engineer technologist, project manager), - 3D... Read more

Edin Tarakčija - Mechanical engineer from BiH - A lot of experience in production and manufacturing (departments: Technology and development, mechanical engineer technologist, project manager), - 3D Design and modelling using the using the most popular CAD softwares: SolidWorks, CATIA, Inventor, 3Ds Max etc. , and rendering and create realistic photos for your project. - 2D Manufacturing (production) drawings with all needed details for bend, weld, assembly etc. Mechanical engineer development: - Analyzing materials, required quantities and procurement plans for their projects - Analyzing the project itself, the possibility of development, and conceptual solutions for development - Creating technical documentation for production (2D – 3D) - Making a calculation of their projects with production costs

Ten years of professional experience in architectural design and real estate development. Specialized in high quality and prestigious hospitality, residential and commercial projects. Took part in dif... Read more

Ten years of professional experience in architectural design and real estate development. Specialized in high quality and prestigious hospitality, residential and commercial projects. Took part in different stages of projects of different scale, from conceptual design to application drawings, from a family house to a shopping mall.

Highly skilled Architectural tech. with [6 years] of experience in designing, planning, and overseeing the construction of diverse architectural projects. Possessing a comprehensive understanding of a... Read more

Highly skilled Architectural tech. with [6 years] of experience in designing, planning, and overseeing the construction of diverse architectural projects. Possessing a comprehensive understanding of architectural principles, building codes, and construction processes, I am committed to delivering innovative and sustainable design solutions tailored to meet client needs. Proficient in various design software.

Hello, I am Deepak Kumar, a Mechanical Engineer specializing in Machine Design and Analysis. I have strong expertise in SolidWorks and ANSYS, with experience in creating detailed models, assemblies, s... Read more

Hello, I am Deepak Kumar, a Mechanical Engineer specializing in Machine Design and Analysis. I have strong expertise in SolidWorks and ANSYS, with experience in creating detailed models, assemblies, simulations, and industrial design solutions. What I Provide in SolidWorks -2D Drawings with precise dimensions and tolerances -3D Part Modelling (solid and feature-based design) -Assembly Design with motion and interference checks -Sheet Metal Design with flat patterns and fabrication drawings -Surface Modelling for complex or aesthetic geometries -File Deliverables in STEP, IGES, STL, and Parasolid (.XT) formats -Design Support for both industrial and academic projects -3D Printing Services using Bambu Lab What I Provide in ANSYS -Static Analysis: Stress, strain, deformation, FOS, and failure criteria (Von Mises, Tresca) -Modal/Vibration Analysis: Natural frequencies, mode shapes, and acoustic-structural coupling -Thermal Analysis: Steady-state, transient, and thermo-structural coupling -Dynamic Analysis: Transient, harmonic, impact, and cyclic loading simulations -Nonlinear Analysis: Material (plasticity, creep) and geometric nonlinearity, contact & friction -Fatigue & Life Analysis: Fatigue life prediction using S-N curves under cyclic stresses -Advanced Simulation: Topology optimization, composites, parametric studies, and CAD-FEA integration -Reporting: Detailed reports with contour plots, deformation animations, and research-ready documentation -Reports: 100% plagiarism-free technical and analysis reports Note -Feel free to contact me anytime for design guidance, simulation advice, or project discussions I’m always happy to help, and all advice is free of cost.

Hi, I am a 3D artist who is newer to the industry and I am looking for some small projects to work on outside of my regular (Monday-Friday) job hours.I have been working as a 3D scanning assistant fo... Read more

Hi, I am a 3D artist who is newer to the industry and I am looking for some small projects to work on outside of my regular (Monday-Friday) job hours.I have been working as a 3D scanning assistant for the past year. My tasks include scanning products through photogrammetry and helping to polish the 3D models before they are uploaded to my work’s website. I graduated with a diploma in digital animation in 2018 and I have particular strengths in modeling and rigging. I am a very hard worker, I’m honest and I love what I do. I would be more than happy to help you with your next project!

Hi, I am a designer and 3D artist. I like technology and the way it makes our lives better. My goals: deliver high quality results in the area of product concept and render, contribute to the creati... Read more

Hi, I am a designer and 3D artist. I like technology and the way it makes our lives better. My goals: deliver high quality results in the area of product concept and render, contribute to the creation and planning of the product design and manufacturing. My tools: Blender, 3DS Max, Inventor and Unreal Engine Thank you

AutoCAD, Revit and 3D modeling outsourcing services provider. 10 Years’ experience of outsourcing. Specialized in historic building preservation and renovation projects. Mostly the projects are from t... Read more

AutoCAD, Revit and 3D modeling outsourcing services provider. 10 Years’ experience of outsourcing. Specialized in historic building preservation and renovation projects. Mostly the projects are from the Netherland. One of the expertise is to prepare existing situation drawings in AutoCAD format (layout plans, cross sections, section details, facades, 3d Mass study models) based on information provided in the form of rough sketches, and snaps shots of the existing building. Very good knowledge of historic European buildings (residential, commercial and monumental). Extensive experience in developing following types of drawings: - Architectural floor plans, elevations, cross sections - Shop drawings, door & window details - As built drawings - Construction drawings - Electro mechanical shop drawings - DD drawings - IFC drawings - 3D Modeling, renderings (Interiors & exteriors) - Responsible for assisting in Conceptual Schematic design. - Making and evaluating model studies and preparation of presentation drawings.