Hire the best freelance Hand Calculations expert designers for your company

I am a Professional Engineer specializing in Machine Design and Materials. I have over 10 years of experience in the heavy steel fabrication and marine industry. My expertise is in weldment and machin... Read more

I am a Professional Engineer specializing in Machine Design and Materials. I have over 10 years of experience in the heavy steel fabrication and marine industry. My expertise is in weldment and machine design for commercial and military applications.

Mechanical Engineer graduated from Visvesvaraya technological university, India in 2013. Worked as a research assistant in Aeronautical Development Establishment, DRDO . Worked on design and dev... Read more

Mechanical Engineer graduated from Visvesvaraya technological university, India in 2013. Worked as a research assistant in Aeronautical Development Establishment, DRDO . Worked on design and development of sensors mounting base and mechanical subsystems of 10 kg class UAV. Expert at CAD software, tolerance analysis ,GD&T and FEA analysis.

As a Steelworks Design Engineer at Framatome, I apply my 13+ years of mechanical design experience to create and optimize steel structures for the auxiliary buildings of the Hinkley Point "C" project,... Read more

As a Steelworks Design Engineer at Framatome, I apply my 13+ years of mechanical design experience to create and optimize steel structures for the auxiliary buildings of the Hinkley Point "C" project, one of the largest and most complex nuclear power plants in Europe. I use various software tools, such as Navisworks, RStab, Mathcad, and AutoCAD, to perform structural calculations, bolted connection design, natural frequency analysis, and 2D detailed drawing creation, following the Eurocode and ETC-C standards and specifications. My mission is to deliver high-quality and cost-effective steelwork solutions that meet the nuclear industry's safety, performance, and sustainability requirements. I collaborate with clients, project managers, and other engineers to ensure the design meets the expectations and needs of the stakeholders. I also document and communicate the design process, risks, and outcomes, using MS Word and Excel. I am passionate about learning new skills and technologies.

Catia v5, GD&T, Tolerance stack-up, Hand calculations, Vehicle Interior Design, Drawings, Layout studies

Catia v5, GD&T, Tolerance stack-up, Hand calculations, Vehicle Interior Design, Drawings, Layout studies

I have learnt ProE and Solidworks softwares as my courses. I have designed Rack and Pinion Gear arrangement in ProE. Moreover, I have designed Bicycle Frame in Solidworks alongwith FEA simulations. I... Read more

I have learnt ProE and Solidworks softwares as my courses. I have designed Rack and Pinion Gear arrangement in ProE. Moreover, I have designed Bicycle Frame in Solidworks alongwith FEA simulations. I also have Mechanics of Materials knowledge to better understand and analyze the designs.

Most of my experience revolves around heavy machinery. My skillsets include: Sheet Metal Design Structural Weldments Mechanical Power Transmission Hydraulics FEA Analysis (Static Structural, Modal, Fo... Read more

Most of my experience revolves around heavy machinery. My skillsets include: Sheet Metal Design Structural Weldments Mechanical Power Transmission Hydraulics FEA Analysis (Static Structural, Modal, Forced Frequency) CFD Analysis Design for Manufacturing Design for Assembly Project Management

I have done my graduation in Mechanical Engineering from NIT-Bhopal Tier-1 college of India, In my college I was a part of SAE BAJA team then I started my professional career with a electric bike star... Read more

I have done my graduation in Mechanical Engineering from NIT-Bhopal Tier-1 college of India, In my college I was a part of SAE BAJA team then I started my professional career with a electric bike startup there I worked as a mechanical design engineer then switched to well established organization as a same designation, In my 2 years of experience I have designed lot of part level components as well as Big assemblies.Drafted 2-D drawings as well and having good experience in GD&T too.

Experienced Drafter with over six years of experience using VectorWorks, AutoCAD, ArchiCAD, and drafting by hand. Collaborated with skilled drafters for 2+ years to develop theatrical productions and... Read more

Experienced Drafter with over six years of experience using VectorWorks, AutoCAD, ArchiCAD, and drafting by hand. Collaborated with skilled drafters for 2+ years to develop theatrical productions and enhance or redesign existing spaces. Skilled in creating precise, functional designs that bring creative and technical concepts to life.

I am the director of Mechanika Ltd (www.mechanika-ltd.com) and a consultant Stress Engineer. I have solid all-round engineering ability and I am a SQEP calculation checker/signatory and calculation au... Read more

I am the director of Mechanika Ltd (www.mechanika-ltd.com) and a consultant Stress Engineer. I have solid all-round engineering ability and I am a SQEP calculation checker/signatory and calculation author. I have held stress signatory status for 8 years, whilst substantiating high integrity, safety critical equipment and structures. I can apply my expertise to metallic, polymer or composite structures and mechanisms in any industry. I have primary interests in remote handling, precision medical devices, fluidics, mechanism design, complex structures and heavy lifting equipment. I enjoy all areas of design; with specific expertise in mechanisms, traditional static and dynamic hand calculations, seismic assessment, FEA, classical mechanics on mechanisms and structures, fatigue and failure investigations and injection moulded product design. I am a good communicator and enjoy presenting to stake-holders. I am an expert user of ANSYS Workbench, RFEM/RSTAB, Solidworks and MathCAD with licenses for all of the aforementioned software. I can produce substantiation calculations to allowable stress and limit state methods and I have extensive experience in producing calculations to numerous codes – primarily BS EN 13001 (crane code), F.E.M Section I & II, Eurocodes, BS2573 parts 1 and 2, BS5950. I am a well-rounded individual with a proven track record in a number of diverse industries, including: cranes/heavy lifting equipment and mechanisms, remote handling, bulk materials handling, precision medical devices, aerospace actuators/valves, hydraulics and general consumer products. I regard analysis and mechanical design as integral entities and I offer design by substantiation services, where equipment is designed to be code compliant from it's inception. I have had several of my designs patented and I take pride in pioneering new engineering concepts and technology.

Hi! I’m a passionate Mechanical Design Engineer with a knack for turning ideas into reality. With hands-on experience in CAD modeling, FEA/CFD simulations, and product development, I’ve worked on ever... Read more

Hi! I’m a passionate Mechanical Design Engineer with a knack for turning ideas into reality. With hands-on experience in CAD modeling, FEA/CFD simulations, and product development, I’ve worked on everything from optimising compressor designs to creating ASME/API-compliant systems. My toolbox includes SolidWorks, ANSYS, AutoCAD, and MATLAB, and I love tackling challenges like thermal analysis and making designs more efficient for manufacturing. Whether it’s designing a new product or improving an existing one, I’m here to deliver solutions that are not just functional but also cost-effective. Let’s create something amazing together.

At Plasser Australia, our design team innovates and elevates railway track machine performance. We focus on improving design processes, mentoring teams, and ensuring compliance with industry standards... Read more

At Plasser Australia, our design team innovates and elevates railway track machine performance. We focus on improving design processes, mentoring teams, and ensuring compliance with industry standards, all aimed at enhancing machine efficiency. My ability to quickly learn new skills and adapt to different engineering software and packages enables me to drive innovation and stay ahead in an ever-evolving field. Previously at BAE Systems Australia, I facilitated a major maritime vessel upgrade and provided technical leadership to junior engineers. As a Chartered Professional Engineer, my core competencies in the Mechanical and Aerospace Engineering discipline fuse with practical leadership, shaping solutions that are resourceful, efficient and safe.

hello my name is Borhen MLIK I'm expert solidworks and I wanna share my soft skills, I work technical manager and trainer solidworks, I have many experience in many fields. thank you to trust me cordi... Read more

hello my name is Borhen MLIK I'm expert solidworks and I wanna share my soft skills, I work technical manager and trainer solidworks, I have many experience in many fields. thank you to trust me cordially

I am an Aerospace Structural Engineer with considerable experience designing air carriage systems, linkages, high pressure pneumatic systems, gear trains, rotary actuators, centrifugal fans/ compresso... Read more

I am an Aerospace Structural Engineer with considerable experience designing air carriage systems, linkages, high pressure pneumatic systems, gear trains, rotary actuators, centrifugal fans/ compressors and similar. I provide fully worked structural calculations in an editable format so that customers can evaluate multiple designs. I have excellent technical report writing skills and am used to preparing documents for product certification. I have experience with engineering drafting to bs:en8888 but can adapt to other standards if required.

- Certified SOLIDWORKS 2020 Associate, MATLAB, AUTOCAD, and Microsoft Office proficient. - Undergraduate Mechanical Engineer at the University of Florida and 3D Modeling Consultation

- Certified SOLIDWORKS 2020 Associate, MATLAB, AUTOCAD, and Microsoft Office proficient. - Undergraduate Mechanical Engineer at the University of Florida and 3D Modeling Consultation

I am a Senior Principal Engineer specializing in structural analysis, with over a decade of experience in advanced simulation, mechanical design validation, and fatigue/fracture mechanics. Holding bot... Read more

I am a Senior Principal Engineer specializing in structural analysis, with over a decade of experience in advanced simulation, mechanical design validation, and fatigue/fracture mechanics. Holding both Bachelor’s and Master’s degrees in Mechanical Engineering, i have built a career delivering high-impact engineering solutions in sectors such as aerospace, defense, and heavy machinery. With deep expertise in finite element analysis (FEA), I am skilled in using industry-standard tools such as ANSYS to perform nonlinear, static, dynamic, and thermal stress as well as correlating results with physical testing and performing classical hand calculations

I am a Civil/Structural Engineer with Professional Status (PEng/Ir) and also a licensed Safety and Health Officer (Green Book Holder). My vast experience includes 10 years experience in design and... Read more

I am a Civil/Structural Engineer with Professional Status (PEng/Ir) and also a licensed Safety and Health Officer (Green Book Holder). My vast experience includes 10 years experience in design and 8 years in project planning and safety and health. My past projects includes complex steel structures and multi-story buildings.

I am an aerospace and design enthusiast. I have good command in Solidworks, CATIA, Hypermesh, MSc Nastran, ANSYS CFD, and ICEM CFD. I am good at hand-calculations of static structures and validate the... Read more

I am an aerospace and design enthusiast. I have good command in Solidworks, CATIA, Hypermesh, MSc Nastran, ANSYS CFD, and ICEM CFD. I am good at hand-calculations of static structures and validate the same results using FEA software.

Packaging of complete seat, seat structure, mechanisms along with environment. Comfort surface generation as per Bio-science guidelines. Manufacturing and assembly feasibility studies. Basic DFMEA... Read more

Packaging of complete seat, seat structure, mechanisms along with environment. Comfort surface generation as per Bio-science guidelines. Manufacturing and assembly feasibility studies. Basic DFMEA studies. Developing proposals & building their prototype & cut and weld samples. Interpreting FEA results & giving design proposals to meet the FEA requirements. Basic hand calculations & performing tolerance stack up. Basic awareness about Seating regulations (FMVSS, ECE, etc) Design of Forging Components & Forging Dies. Two wheeler fuel tank modification

Skills: - software known : CATIA, Solid Works ANSYS, NASTRAN P. - Expert in Concept design & Hand calculations related Mechanical engineering. - GD&T, Tolerance stackup Analysis, FEA Analysis, fatig... Read more

Skills: - software known : CATIA, Solid Works ANSYS, NASTRAN P. - Expert in Concept design & Hand calculations related Mechanical engineering. - GD&T, Tolerance stackup Analysis, FEA Analysis, fatigue life estimation, DFMECA, 2D part & Assy drawings for manufacturing. - Design of Machine & sheet metal parts. - Design & simulation of mechanisms. Project Completed: -Air to Air Missile Launcher for Indian Airforce.( Design & Developed India's 1st Indigenous launcher.) - Air to ground Missile Launcher: Design & devlopment ( Series production Approved). - Inflight Refueling Probe for fighter aircrafts. -Weapon Integration projects. - Design & Developed a Formula Student prototype Vehicle & For Formula BHARAT, & Won overall champion ship in 2015-16 in India. Education : - BE (Mechanical). - Qualified to IES ( UPSC ) Interview two times in 2018 & 2019. - GATE ( Mechanical) score: 99.928 percentile ( Marks - 78/100 ).

Ours is a group of Mechanical engineers over 15 years of industrial experience in Product Design and development with history of working in renewable and thermal energy industry, heavy industry, autom... Read more

Ours is a group of Mechanical engineers over 15 years of industrial experience in Product Design and development with history of working in renewable and thermal energy industry, heavy industry, automobile and electrical industry. Skilled in design tools NX, Creo, SolidWorks, AutoCAD. Part modeling, assembly, sheet metal and detailing Skilled in GD&T, Tolerence analysis, FMEAs and hand calculations. Good oral and written communication skills. Strong engineering professionals with a Bachelor of Engineering - BE focused in Mechanical Engineering.

Based in UK. Educated to degree level in Mechanical Engineering. Varied experience in product development including: Aerospace engineering as a Stress Engineer. This involved crash analysis a... Read more

Based in UK. Educated to degree level in Mechanical Engineering. Varied experience in product development including: Aerospace engineering as a Stress Engineer. This involved crash analysis as well as supplementing the general design office with a mixture of finite element analysis and classical hand calculations. Concept engine development in a systems engineering capacity. I'm currently an Engineering Project Manager responsible for the delivery of a multi-million pound project for a foreign Navy. Looking to work collaboratively on projects in a bid to raise my profile and build a portfolio.

I'm a mechanical engineer experienced in the mechanical design of parts and assemblies, covering all the steps from hand calculations to the layout of workshop-ready 2D tables. I'm daily involved in t... Read more

I'm a mechanical engineer experienced in the mechanical design of parts and assemblies, covering all the steps from hand calculations to the layout of workshop-ready 2D tables. I'm daily involved in the development of parts to be machined or 3D printed, as well as in the 3D modeling of complex and innovative structures with a design-for-manufacturing approach. I'm currently working with Autodesk Fusion360 as my main CAD package. I graduated with a MSc in Mechanical Engineering at the University of Palermo, Italy in 2019, and then co-founded a startup active in the fields of robotics and additive manufacturing.

Stress Analysis of Airframe Components,. Linear Static and Model Analysis Using MSC Nastran & Patran Hand Calculations by using Strength of Materials Approach. 3D Modeling & 2D Drafting with Catia... Read more

Stress Analysis of Airframe Components,. Linear Static and Model Analysis Using MSC Nastran & Patran Hand Calculations by using Strength of Materials Approach. 3D Modeling & 2D Drafting with Catia V5 Projects 1. 3D Modeling of High Pressure Spool rotating tool  3D modelling of High Pressure Spool Rotating tool which is used for LCA maintenance.  Dimensions were taken from existing component, Reverse engineering technique was used.  CAD modelling was done in Catia 2. Meshing of Airbus brackets  Meshing of Airbus A350XWB electrical & hydraulic brackets were done in Patran.  All the quality parameters were maintained as per Airbus standards. 3. CAD modelling of a Takeup tower(Convayor)  2D drafting of Hand drawing was done  3D modelling of the takeup tower was done in Catia 4. Meshing of ESI & HIS Brackets of Bombardier G7000  Meshing of ESI & HIS brackets were done in Patran  All quality parameters were maintained as per the requirements.

FEA/CAE Engineer with 15+years of expertise in Durability evaluation of structures through Finite Element method (FEM) Experience in Chassis system components durability and structures used in large e... Read more

FEA/CAE Engineer with 15+years of expertise in Durability evaluation of structures through Finite Element method (FEM) Experience in Chassis system components durability and structures used in large earth moving off road machinery and engines. Expertise in Static, Non Linear, Contact, Thermal, Steady state and transient, low and high cycle fatigue, Optimization, strain gaging and FE Modeling. Ability in analytical problem and Hand calculations. Worked extensively in Power Generation and Steam Turbine Engineering, Heavy Engineering, Chassis durability and Core Engine simulation. Experience in Excel VBA to automate the work flow process and data mining. Experience in preparation of Analysis Reports, Project Planning and offshore-onsite projects coordination. Proven ability in understanding and interpreting the analysis result, Load path determination and suggesting design alternatives to reduce the stresses and to meet the structural integrity requirements

I hold masters degree in mechanical engineering from the University of Sheffield, UK. Currently I am working as a senior mechanical design and analysis engineering in the UK since 7 years. I am regist... Read more

I hold masters degree in mechanical engineering from the University of Sheffield, UK. Currently I am working as a senior mechanical design and analysis engineering in the UK since 7 years. I am registered with IMechE as a chartered engineer. • 7+ years experienced in Finite Element Analysis (FEA) using Ansys Mechanical & APDL • Specialized in linear, nonlinear, fatigue and creep FEA using implicit solver • Specialized in drop test, crash test, stamping operation analysis using Explicit STR and LS Dyna • 7+ years experienced in Computational Fluid Dynamics (CFD) using Fluent • 7 years experience in CAD using AutoCAD & Autodesk Inventor and Solidworks • Structural Analysis/Stress hand calculations, Mathcad • PEM Fuel cell technology expert from Mechanical aspect. . • Design failure mode & effect analysis (DFMEA) • Vast material knowledge which includes steel, lightweight materials like Ti, Mg, Al as well as polymers