Hire the best freelance Engineering Design Review expert designers for your company
Henri A.
Engineering Design Review Designer
Allentown, United States
- Codex
- ISAAC
- Blender
- Houdini
- Robotics
- OpenFOAM
- Paraview
- Sculpting
- Rendering
- Simulation
- 3D Modeling
- Prototyping
- 3D Rendering
- 3D Modeling
- 3D Retopology
- Unreal Engine
- Fluid Dynamics
- Product Design
- Mesh Generation
- Surface Modeling
- Mechanical Design
- Engineering Design
- 3D Printing Design
- Engineering Design
- 3D Sculpting Design
- 3D Product Modeling
- Hard Surface Modeling
- 3D Rendering Services
- Mechanical Engineering
- Internet of Things (IoT)
- Engineering Design Review
- Rapid Prototyping Services
- Assembly Modeling Services
- Computational Fluid Dynamics
- Blender 3D Modeling Services
- Prototype Design Engineering
- Computational Fluid Dynamics
- Product Engineering Services
- Simulation Verification and Va
I focus on computational fluid dynamics (CFD) simulation, fluid dynamics, and engineering design review. I work with OpenFOAM and apply simulation verification and validation (V&V) to help check that... Read more
I focus on computational fluid dynamics (CFD) simulation, fluid dynamics, and engineering design review. I work with OpenFOAM and apply simulation verification and validation (V&V) to help check that models, assumptions, and results are sound before design decisions are made. I also offer 3D modeling and product visualization with Blender, including hard-surface modeling and photoreal rendering. For mesh and topology work, I prepare clean simulation-ready geometry, structured CFD meshes, and mesh quality checks, along with retopology and watertight print-ready models. I also work on robotics and mechanism prototyping, from CAD linkage models to physical desktop robot builds. I operate as a US-based, SBA VetCert certified Veteran-Owned Small Business.
Dhiya S.
Engineering Design Review Designer
Sulaymaniyah, Iraq
- GIS
- AutoCAD
- CAD Drawing
- Cable Schedule
- Microsoft Office
- Electrical Design
- Electrical Engineering
- Electrical Engineering
- Voltage Drop Calculation
- Single Line Diagram (SLD)
- Engineering Design Review
- Electrical Load Calculation
I provide independent electrical design reviews for villas, residential developments, schools and other buildings. I help consultants, contractors and property owners check existing designs before pro... Read more
I provide independent electrical design reviews for villas, residential developments, schools and other buildings. I help consultants, contractors and property owners check existing designs before procurement and construction, with clear calculation checks, annotated drawing comments and a prioritized review register. As a senior electrical engineer with experience in electrical design, supervision and consultancy, my focus is the engineering basis behind the drawings. My electrical review scope includes: • Load calculations, demand assumptions and panel schedules • Cable and circuit-breaker sizing and voltage-drop verification • Single-line diagrams and power distribution • Lighting and power layouts • Earthing and grounding arrangements • Consistency between drawings, calculations, specifications and bills of quantities • Electrical material submittals against project requirements For each finding, I identify the issue, its technical basis, the required corrective action and any information needed to close the comment. A follow-up review of the designer’s responses can be included in the agreed scope. This service covers electrical design checking. The applicable standards, local requirements, available documents and deliverables are agreed before work starts. Final design responsibility and statutory approval remain with the appointed designer and locally authorized engineer. B.Sc. in Electrical Engineering, University of Baghdad, 2003. Available for remote project-based and ongoing collaboration using AutoCAD drawings, PDF drawing sets and Excel calculation schedules. Send your drawing set and calculation package so we can define the review scope and deliverables.
Volodymyr A.
Engineering Design Review Designer
Kharkiv, Ukraine
- AutoCAD
- DFM Services
- Machine Design
- Microsoft Word
- Machine Design
- Concept Design
- Microsoft Excel
- Steel Structures
- Failure Analysis
- Mechanical Design
- Automation Design
- Crane Engineering
- Engineering Design
- Python Programming
- Engineering Design
- Reverse Engineering
- Design for Assembly
- Product Engineering
- Structural Analysis
- Mechanical Engineer
- Reverse Engineering
- Engineering Analysis
- Industrial Equipment
- Industrial Automation
- Structural Engineering
- Electrical Engineering
- Mechanical Engineering
- Automation Engineering
- Electrical Engineering
- Mechanical Engineering
- Structural Engineering
- Technical Documentation
- Manufacturing Engineering
- Engineering Design Review
- Variable Frequency Drives
- Prototype Design Services
- Overhead Crane Engineering
- Control Systems Engineering
- FEA Finite Element Analysis
- Design Engineering Services
- Design for Manufacturability
- Prototype Design Engineering
- Metal Design and Fabrication
- Product Engineering Services
- Design for Assembly Services
- Lifting Equipment Engineering
- Finite Element Analysis (FEA)
- Special Purpose Machine Design
- Technical Writing for Engineering
- Mechanical Engineering Calculations
- Design for Manufacturing and Assembly
- Design for Manufacturability (DFM Services)
- Radio Frequency Engineering and Design Services
Senior mechanical engineer with more than 20 years of hands-on experience in industrial equipment, lifting systems, cranes, crane runways, steel structures, electrical drives, automation and technical... Read more
Senior mechanical engineer with more than 20 years of hands-on experience in industrial equipment, lifting systems, cranes, crane runways, steel structures, electrical drives, automation and technical documentation. My work covers the full engineering cycle: understanding the physical problem, developing the engineering concept, defining structural and mechanical solutions, performing calculations, selecting materials and sections, checking load paths and critical components, and verifying designs for strength, stiffness, stability, manufacturability, installation, maintenance and operation. I have extensive practical experience with overhead, gantry and suspended cranes, crane runways, lifting beams and spreaders, non-standard lifting equipment, industrial steel structures and modernization of existing equipment. I also work with crane electrical drives and control systems, including VFD integration, control logic, protections, interlocks, limit switches, radio control, equipment selection and commissioning support. My engineering approach combines analytical calculations, engineering judgement, practical field experience and numerical verification where appropriate. I can review existing drawings, calculations and technical solutions, identify design problems and propose practical modifications. I am particularly interested in remote engineering assignments involving: - mechanical and structural analysis; - engineering calculations and design verification; - cranes and lifting equipment; - steel structures; - industrial equipment and machinery; - electrical drives and automation; - design review and troubleshooting; - modernization of existing equipment; - technical documentation and specifications; - independent engineering review. I am available for both short expert-review tasks and larger engineering projects. I can work from drawings, technical documentation, photographs, specifications and other available project data.
Sivananda K.
Engineering Design Review Designer
Bengaluru, India
- FEA
- CAD Design
- 2D Drawing
- DFM Design
- User defined
- DFM Services
- 3D CAD Design
- Solid Modeling
- Product Design
- Concept Design
- Design Engineer
- 3D CAD Modeling
- Surface Modeling
- 3D Solid Modeling
- Engineering Design
- UG NX (Siemens NX)
- Siemens Teamcenter
- Engineering Design
- 3D Design Services
- Design for Assembly
- Product Development
- Parametric Modeling
- Design Optimization
- 3D Surface Modeling
- CAD Data Management
- 3D Product Modeling
- HVAC Design Services
- Mechanical CAD Design
- CAD Model Modification
- Mechanical Engineering
- Medical Devices Design
- AutoCAD Design Services
- CAD Conversion Services
- Design for Manufacturing
- Plastic Component Design
- CAD Design & Development
- Siemens Teamcenter / PLM
- Siemens NX (Unigraphics)
- Mechanical Product Design
- Design for Assembly (DFA)
- Engineering Design Review
- Industrial Design Services
- Mechanical Design Services
- Design Engineering Services
- AutoCAD Conversion Services
- Technical Project Management
- 2D to 3D Conversion Services
- Product Engineering Services
- Design for Assembly Services
- CAD Data Conversion Services
- Engineering Change Management
- Automotive Design Engineering
- CAD Model Review & Validation
- User Defined Feature Creation
- Product Design and Development
I am a Senior Mechanical Product Design Engineer and Siemens NX CAD Consultant with 12+ years of professional experience in mechanical product development, 3D CAD design, automotive engineering, engin... Read more
I am a Senior Mechanical Product Design Engineer and Siemens NX CAD Consultant with 12+ years of professional experience in mechanical product development, 3D CAD design, automotive engineering, engineering change management and technical project coordination. My primary expertise is Siemens NX, with extensive hands-on experience in both solid and surface modelling. I have worked on complex product development programs where accuracy, design intent, packaging, manufacturability, quality and engineering requirements are critical. I can support clients with complete or partial product development activities, from interpreting engineering requirements and reference data through 3D modelling, design modification, CAD review, design validation and engineering documentation. KEY CAD & DESIGN EXPERTISE • Siemens NX 3D CAD modelling • NX solid modelling • NX surface modelling • Parametric modelling • Feature-based modelling • Complex geometry development • Product design and development • CAD model modification and optimization • Existing CAD model review and correction • Feature-tree and design-intent review • Design feasibility assessment • Packaging and interface checks • Engineering design reviews • 2D drawing interpretation and review • GD&T awareness and application • Design for Manufacturing (DFM) • Design for Assembly (DFA) • Manufacturability reviews • Design optimization and VAVE support • Engineering change implementation AUTOMOTIVE & PLASTIC PRODUCT DESIGN I have extensive experience in automotive product development, particularly interior and exterior components and plastic parts. My experience includes working with complex styling surfaces, packaging constraints, interfaces, mounting strategies and manufacturing considerations. Areas of experience include: • Automotive interior components • Automotive exterior components • Instrument panel and related components • Center console and console components • Fascia and bumper components • Grille and grille-related components • Fenders and claddings • Exterior trims • Interior trims • Plastic housings and covers • Master sections • B-surface development • Parting and manufacturing considerations • Mounting and attachment concepts • Component interfaces • Packaging and clearance checks • Design validation and issue resolution I understand the complete engineering thought process behind a CAD model and do not treat CAD modelling as only a drawing or modelling activity. I focus on design intent, functionality, interfaces, manufacturability, quality and ease of future modification. CAD MODEL REVIEW & IMPROVEMENT I can also support clients who already have CAD models but need an experienced engineer to review or improve them. Services can include: • Reviewing existing Siemens NX models • Checking feature-tree structure and design intent • Identifying modelling issues • Improving model editability • Reviewing complex or poorly structured models • Rebuilding or modifying geometry where required • Checking interfaces and clearances • Identifying potential manufacturability concerns • Reviewing CAD data before downstream engineering/manufacturing activities This can be particularly useful for companies that need an experienced CAD engineer to independently review work completed by another designer or engineering team. CAD DATA & TEAMCENTER EXPERIENCE I also have extensive experience with Siemens Teamcenter and engineering data management. My experience includes: • Part and data-set management • Revision management • Engineering release processes • Workflows • Engineering data organization • CAD data management • Product structure awareness • Release and change processes • User guidance and training I can support organizations that require practical guidance for engineers working with NX and Teamcenter. ENGINEERING CHANGE & PRODUCT DEVELOPMENT I have significant experience supporting engineering changes and product development activities in an OEM engineering environment. I can assist with: • Engineering change implementation • Design modifications • Change impact assessment • Release preparation • CAD validation • Design issue resolution • Engineering documentation • Coordination between design and engineering teams • Design review and technical clarification REMOTE CONSULTING & FREELANCE SUPPORT I am comfortable working with remote teams and can independently handle assigned engineering tasks with clear requirements and deliverables. I am open to both short-term and long-term freelance/consulting assignments, including hourly work, project-based work and ongoing remote engineering support. I can support clients in areas such as: • Siemens NX CAD modelling • Mechanical product design • Automotive CAD design • Plastic component design • Industrial product design • CAD model modification • CAD model review • Design validation • DFM/DFA review • GD&T and drawing review • Engineering documentation • CAD data preparation • Teamcenter support
Vladislav M.
Engineering Design Review Designer
Carcavelos, Portugal
- ANSYS
- DFM / DFA
- Simulation
- CAD Design
- SolidWorks
- Prototyping
- ANSYS Fluent
- ANSYS Fluent
- Heat Transfer
- 3D CAD Modeling
- PCB integration
- Enclosure Design
- Thermal Analysis
- Mechanical Design
- Sheet Metal Design
- Tolerance Analysis
- Thermal Management
- Electronic Devices
- Product Development
- Electronics Cooling
- Hardware Integration
- Prototype Engineering
- SolidWorks Simulation
- Mechanical CAD Design
- Additive Manufacturing
- Mechanical Engineering
- Mechanical Engineering
- Mechanical Product Design
- Engineering Design Review
- Electonic Enclosure Design
- SolidWorks Flow Simulation
- SolidWorks Flow Simulation
- Thermal & Mechanical Design
- Computational Fluid Dynamics
- Prototype Design Engineering
- Computational Fluid Dynamics
- Product Engineering Services
- Electronic Enclosures Design
- Finite Element Analysis (FEA)
- SolidWorks Engineering Services
I am a Senior Mechanical & Thermal Engineer with 9+ years of experience developing computing and embedded hardware, including tablets, compact PCs, smartphones, and server platforms. I help engineeri... Read more
I am a Senior Mechanical & Thermal Engineer with 9+ years of experience developing computing and embedded hardware, including tablets, compact PCs, smartphones, and server platforms. I help engineering teams turn product requirements and electronic assemblies into functional, manufacturable hardware. My work covers mechanical architecture, enclosure design, electronics integration, thermal management, prototyping, and design validation. My core services: - Mechanical product development and enclosure design - PCB and electronics mechanical integration - Electronics cooling, thermal design, and CFD simulation - Mechanical and thermal design reviews - DFM/DFA and manufacturing preparation - Prototype troubleshooting and engineering problem-solving I work primarily with SolidWorks, SolidWorks Flow Simulation, and Ansys Fluent. My experience includes CNC-machined parts, sheet metal, injection-molded components, and additive manufacturing. Based in Portugal, I am available for remote B2B engineering contracts, project-based development, and technical consulting, with occasional on-site visits arranged as needed and subject to mutual agreement.
Gowri T.
Engineering Design Review Designer
New Delhi, India
- CAD Design
- Civil Engineering
- Engineering Design
- General CAD Drafting
- Structural Engineering
- Civil Drafting Services
- AutoCAD Design Services
- 2D CAD Drafting Services
- AutoCAD Drawing Services
- AutoCAD Drafting & Design
- Contract Drafting Services
- FEA Finite Element Analysis
- Design Engineering Services
- Paper to AutoCAD Conversion
- 2D to 3D Conversion Services
Roland G.
Engineering Design Review Designer
Georgia
- FEA
- Drafting
- CAD Design
- DIY Design
- Copyrights
- Heat Transfer
- Patent Search
- Patent Drawings
- Engineering Design
- Structural Analysis
- Aerospace Engineering
- Mechanical Engineering
- Design Patent Services
- Design Engineering Services
gineering consulting for complex technical problems, new product concepts, mechanisms, energy systems, and industrial projects. My work includes mechanical and structural analysis, strength and load... Read more
gineering consulting for complex technical problems, new product concepts, mechanisms, energy systems, and industrial projects. My work includes mechanical and structural analysis, strength and load assessment, reliability and failure analysis, heat-transfer and thermal-system analysis, engineering design review, materials selection, manufacturing feasibility, DFM, and technical risk assessment. I can review existing designs, drawings, calculations, prototypes, and technical concepts; identify weaknesses and risks; recommend practical improvements; and prepare clear engineering reports and technical opinions. I am particularly interested in complex projects where the client needs an independent engineering opinion rather than routine drafting. I can support inventors, product developers, manufacturers, engineering companies, and investors from the initial technical idea through feasibility assessment, design review, manufacturing preparation, and technical documentation. My current independent engineering work includes the analysis of advanced LNG-based cooling and energy systems for AI/HPC data centers, including cryogenic cooling, closed-loop nitrogen thermal storage, mechanical backup systems, energy integration, reliability, and safety. I also provide technical analysis of inventions and patent-related engineering documentation
Arunkumar M.
Engineering Design Review Designer
Bengaluru, India
- AutoCAD
- CATIA V5
- SolidWorks
- CAD Drawing
- 3D Modeling
- 3d experiance
- Product Design
- Concept Design
- Design Engineer
- 2D & 3D Modeling
- Structural Design
- 2D to 3D Modeling
- Sheet Metal Design
- Engineering Design
- Design Development
- Design Engineering
- Engineering Design
- 3D Design Services
- Engineering Drawing
- Mechanical Drafting
- Part-to-CAD Modeling
- Aeroatructural design
- Aerospace Engineering
- CATIA Design Services
- PDF to CAD Conversion
- Mechanical CAD Design
- Control surface design
- Mechanical Design Services
- Design Engineering Services
- 2D to 3D Conversion Services
- Composite Aerostructure Design
I am a Senior Aerospace Structural Design Engineer with 12+ years of experience in aircraft structural design, CAD, sheet-metal design, engineering drawings, GD&T and project engineering. My professi... Read more
I am a Senior Aerospace Structural Design Engineer with 12+ years of experience in aircraft structural design, CAD, sheet-metal design, engineering drawings, GD&T and project engineering. My professional experience includes aircraft structural components, control surfaces, UAV/aircraft structures and weapon-bay structural applications, together with engineering documentation and design-development activities. I began my career with AutoCAD-based engineering work and progressed into aerospace structural design and project-level responsibilities. My areas of expertise include: • Aircraft & UAV structural design • Structural CAD modelling • Sheet-metal design • Engineering drawings • GD&T and tolerancing • Fasteners and riveted joints • Control surfaces • Structural components • Design modifications • Engineering design reviews • Manufacturing-oriented design • Technical documentation I am also available for selected freelance and remote engineering projects where I can provide aerospace structural-design, CAD, drawing-review and engineering consultancy support. I am particularly interested in working with aerospace startups, UAV companies, engineering consultancies and international engineering teams requiring experienced remote design support.
Sserugo B.
Engineering Design Review Designer
Kampala, Uganda
- Spacecraft
- Java Developers
- Engineering Design
- Reverse Engineering
- Product Development
- Mechanical Engineer
- Reverse Engineering
- Automotive Components
- JavaScript Developers
- Mechanical Engineering
- Automotive Engineering
- Engineering Consultant
- Electrical Engineering
- Mechanical Engineering
- Structural Engineering
- Technical Documentation
- Steel Detailing Services
- FEA Finite Element Analysis
- Automotive Electrical Design
- Prototype Design Engineering
- Electronic Enclosures Design
- Metaverse Architecture Design
- Mechanical Engineering Calculations
- Lightweighting Automotive Engineering
- Mechanical Engineering Staffing Agency
- Industrial Engineering Staffing Agency
- Mechanical Engineers Staffing & Recruiting Services
- Staffing & Recruiting Services Tailored for Your Company
My current engineering work involves the development of an electric utility vehicle platform, including drivetrain requirements, battery-enclosure loading calculations, structural sizing estimates, an... Read more
My current engineering work involves the development of an electric utility vehicle platform, including drivetrain requirements, battery-enclosure loading calculations, structural sizing estimates, and prototype development planning. Areas of support Preliminary mechanical engineering calculations and technical reports Component sizing and load assessment Engineering requirements and subsystem documentation Electric vehicle and mobility product development support Preliminary bills of materials and target-cost analysis Engineering design reviews and prototype planning
Vinoth R.
Engineering Design Review Designer
Chennai, India
- AutoCAD
- CAESAR II
- CAESAR II
- Stress Analysis
- Bentley AutoPIPE
- Engineering Design
- CAESAR II, AUTOPIPE
- Piping Stress Analysis
- Mechanical Engineering
- FEA Finite Element Analysis
- Design Engineering Services
Senior Lead Piping Stress Engineer with nearly 20 years of professional experience across Oil & Gas, Refineries, Petrochemical, LNG, Gas Processing, Power Generation and Offshore projects. Strong tec... Read more
Senior Lead Piping Stress Engineer with nearly 20 years of professional experience across Oil & Gas, Refineries, Petrochemical, LNG, Gas Processing, Power Generation and Offshore projects. Strong technical background in piping stress analysis, flexibility analysis, engineering design reviews and piping system evaluation. Experienced in working with leading EPC and offshore engineering project organizations. Proficient in CAESAR II, AutoPIPE, CAEPIPE, SPR, AutoCAD and Navisworks, with project exposure in India and Qatar. Currently interested in part-time freelance engineering assignments, remote technical support and project-based piping stress consultancy.
Frans Y.
Engineering Design Review Designer
Bekasi, Indonesia
- Welding
- AutoCAD
- 3D Models
- CNC Laser
- Machining
- SolidWorks
- DIY Design
- 3D Modeling
- CAD Drawing
- CAD Modeling
- Shop Drawings
- Fixture Design
- Machine Design
- Assembly Design
- CAD Engineering
- Design Engineer
- 3D CAD Modeling
- Mechanical Design
- Assembly Drawings
- 2D to 3D Modeling
- Sheet Metal Design
- Engineering Design
- Tolerance Analysis
- 3D Printing Design
- Engineering Design
- Engineering Drawing
- Design Optimization
- Concept Development
- Mechanical Drafting
- Fabrication Drawings
- General CAD Drafting
- 2D & 3D by Solidworks
- Mechanical CAD Design
- Mechanical Engineering
- Manufacturing Drawings
- Manufacturing Processes
- Machine Drawing Services
- SolidWorks Design Services
- Rapid Prototyping Services
- Assembly Modeling Services
- Mechanical Design Services
- Design Engineering Services
- Standardization of Drawings
- Mechanical Drawing Services
- 2D to 3D Conversion Services
- SolidWorks Engineering Services
I am a Mechanical Design Engineer with more than 12 years of experience in CAD engineering, specializing in SolidWorks 3D modeling, fabrication drawings, welding jigs, fixtures, CF design, and Special... Read more
I am a Mechanical Design Engineer with more than 12 years of experience in CAD engineering, specializing in SolidWorks 3D modeling, fabrication drawings, welding jigs, fixtures, CF design, and Special Purpose Machines (SPM). Throughout my career, I have successfully designed more than 500 welding jigs, fixtures, and manufacturing equipment from concept development to production-ready engineering drawings. My expertise includes creating accurate 3D models, detailed fabrication drawings, assembly drawings, manufacturing documentation, tolerance analysis, and design optimization for real-world production environments. My Services: ✔ 3D CAD Modeling (SolidWorks) ✔ 2D Technical Drawings & Shop Drawings ✔ Fabrication Drawings for Manufacturing ✔ Welding Jig & Fixture Design ✔ Special Purpose Machine (SPM) Design ✔ Sheet Metal Design ✔ Mechanical Assembly Design ✔ Manufacturing Drawing Packages ✔ Engineering Design Review & Optimization ✔ GD&T and Tolerance Analysis ✔ DXF/DWG File Preparation for CNC, Laser Cutting, and Fabrication Software: SolidWorks (10+ Years Experience) AutoCAD (Drawing Support) DXF / DWG Production Files Manufacturing Knowledge: Fabrication & Welding Processes CNC Milling & Turning Manual Machining Surface & Cylindrical Grinding EDM & Wire Cut Pneumatic Systems CMM Measurement Industrial Manufacturing Processes Why Hire Me? 10+ years of hands-on engineering experience Strong fabrication and manufacturing background Detail-oriented and highly analytical Practical engineering solutions, not just CAD models Reliable communication and on-time delivery Production-ready drawings suitable for fabrication shops If you need a professional CAD engineer who understands both design and manufacturing, I can help transform your concepts into accurate, production-ready engineering drawings.
Omar C.
Engineering Design Review Designer
Round Rock, United States
- CATIA
- Machining
- CAD Design
- SolidWorks
- Part Design
- CAD Modeling
- CNC Machining
- 3D CAD Modeling
- Mechanical Design
- Autodesk Inventor
- Engineering Design
- Tolerance Analysis
- Product Development
- Engineering Drawing
- Mechanical Engineer
- Machined Parts Design
- Additive Manufacturing
- Design for Manufacturing
- 2D & 3D Modeling Siemens NX
Mechanical Engineer with experience in aerospace, semiconductor manufacturing, and product development, specializing in machined parts, Design for Manufacturing (DFM), and GD&T. I help clients transfo... Read more
Mechanical Engineer with experience in aerospace, semiconductor manufacturing, and product development, specializing in machined parts, Design for Manufacturing (DFM), and GD&T. I help clients transform concepts into manufacturable designs by creating high-quality 3D CAD models, engineering drawings, and production-ready documentation. My background includes mechanical design, supplier collaboration, tolerance analysis, additive manufacturing, and CNC machining. Whether you’re developing a prototype, refining an existing design, or preparing a product for manufacturing, I focus on practical engineering solutions that reduce cost, improve manufacturability, and meet performance requirements. Services include: * 3D CAD modeling (SolidWorks, CATIA, Autodesk Inventor, NX) * Engineering drawings and GD&T (ASME Y14.5) * Design for Manufacturing (DFM) * Machined part design and optimization * Tolerance stack-up analysis * Prototype and product development * Engineering design reviews I take pride in clear communication, attention to detail, and delivering designs that are ready for the shop floor—not just the computer screen.
Fouad C.
Engineering Design Review Designer
Oakland, United States
- FEA
- BOM
- CAM
- AutoCAD
- Drafting
- 3D Design
- CAD Design
- 2D Drawing
- SolidWorks
- 3D Modeling
- Design Engineer
- Assembly Drawings
- Engineering Design
- Design Engineering
- Product Development
- Engineering Drawing
- Mechanical Engineer
- Mechanical Engineering
Experienced engineer with over 10 years experience as a product development design engineer. I utilize the latest version of SolidWorks 3D modeling software to build, analyze, test and generate profes... Read more
Experienced engineer with over 10 years experience as a product development design engineer. I utilize the latest version of SolidWorks 3D modeling software to build, analyze, test and generate professional engineering drawings. I also assist in the prototype phase in order to make sure that first article built is errors free and is ready for next phase of production. EDUCATION San Jose State University, San JoseBachelors, Mechanical Engineering, 2000Design concentration. Sierra Academy of Aeronautics, Oakland, CACertificate, Technician, 1992 EXPERIENCE Fluid Components International, CaProduct Development Engineer 08/2010 – Present• Design and test new enclosure assembly for new product. • Conduct preliminary testing for CRN, FM and ATEX approvals.• Responsible for generating engineering drawings.• Supervise SolidWorks drafter. Flowserve Co, Vernon, CaProject Engineer 05/2006 – 04/2009• Study customer data sheet and scope of supply. • Generate pump configuration layout and initiate an engineering design review (phase gate 2). • Interface with project managers, customers and vendors throughout the project cycle.• Troubleshoot all incurring issues during the build phase ECO’s, NCR’s, SDR’s.• Use Agile (Product Lifecycle Management) to create & update parts, drawings and BOM’s.• Collaborate with engineering group to streamline design process and lower cost of reworking pumps after testing. Energy innovations, Pasadena, CaMechanical Engineer, 10/2005-01-2006• Collaborated in refining and redesigning components of state of the art solar panel.• Used Solidworks and PDMworks to process and document drawings. Wetdesign corp, Burbank, CaMechanical Engineer, 01/2005 – 08-2005• Involved in the design and development of a water delivery, from concept to prototype to single article using Solidworks 3D design package.• Interface with material engineers to choose the right material for bearings, shaft, gaskets, etc.• Continued involvement with multiple projects. Fluid research, Tustin, CAMechanical Engineer, 06/2004 - 01/2005• Designed a new dispensing machine.• Rework the design and configuration of our most (single shot dispensing machine).• Help design engineering team transition from 2D to 3D drawings using Solidworks design package software. Tegal Corporation, Petaluma, CAMechanical Engineer, 01/2001 - 08/2001• Re-configured system design to accommodate newer parts and components.• Used Co-Create 3D CoCreate Solid Designer to check for interferences, accessibility and control.• Designed test fixtures for high vacuum plasma deposition chamber.• Helped with system design and reconfiguration to meet customer specifications. Ross Cook, San Jose, CAMechanical Engineer, 09/1999 - 11/2000• Developed design concepts in vacuum systems.• Performed analysis and calculations prior to design of particular pump or compressor.• Converted and organized 2D drawing into 3D CAD models using SolidWorks.• Used FEA (COSMOS) software to predict the vibration of compressor shaft at different loads. • Tested units according with ASME standards.Turner Design Corporation, Sunnyvale, CAAssociate Mechanical Engineer, 03/1998 - 09/1999• Presented alternative designs to engineering staff and clients, establishing acceptance of new methods and standards.• Performed design, drafting of components using SolidWorks 3D CAD software to create assembly drawings, and 2D drawings.• Implemented ECO/BOMs.United State Navy Reserve, Santa Clara, CAAircraft Maintenance Technician, 10/1993 - 10/1998• Maintained C130 transport planes.• Aided a team of ground support of A6 intruders at Top Gun Miramar, San Diego.• Participated in two missions: Sigonela, Italy and Atsugi, Japan. ADDITIONAL SKILLS• Computer Skills: SolidWorks, CoCreate Solid Designer, AutoCAD 2000, C++, HTML, Microsoft Office, AS/400• Languages: Fluent in Arabic/French/English LICENSES AND CERTIFICATIONS• Airframe & Power plant (A&P) tech - Sierra Academy PROFESSIONAL AFFILIATIONS• Member - American Society of Mechanical Engineers (ASME)
Muhammad F.
Engineering Design Review Designer
Karachi, Pakistan
- MEP
- FEA
- API
- ETAP
- DIALux
- Oil & Gas
- CAD Design
- 3D Modeling
- 3D Modeling
- Shop Drawings
- Detail Drawing
- General Design
- Concept Design
- Electrical Design
- Engineering Design
- Design Calculation
- Engineering Design
- Electrical Drafting
- Mechanical Drafting
- CAD Drawing Services
- HVAC Design Services
- PDF to CAD Conversion
- Mechanical CAD Design
- Electrical Engineering
- Mechanical Engineering
- 2D CAD Design Services
- AutoCAD Design Services
- AutoCAD Drawing Services
- AutoCAD Drafting & Design
- Industrial Design Services
- Design Engineering Services
- Product Engineering Services
- Electronic Prototyping and Design Services
Electrical Engineer, having Eight (08) years of experience in Electrical Design of projects pertaining to Brown & Green Field. The area of work includes Oil & Gas, FMCGs, Process and Power industries.... Read more
Electrical Engineer, having Eight (08) years of experience in Electrical Design of projects pertaining to Brown & Green Field. The area of work includes Oil & Gas, FMCGs, Process and Power industries. The core activities includes preparation of Initial feasibility, Budgeting estimates, FEED development, Engineering Design, Review of vendor prints, tender document or Procurement packages, Bids Evaluation and As-built preparation. BUILDING ELECTRICAL DESIGN EXPERTISE • Formulation of load requirements considering lighting systems, power systems, HVAC package, Slop water package, Fire fighting systems, BMS systems, CCTV, LAN Voice, Façade lighting and other utilities as per building size and project requirements. • Design/calculation/selection of Basic electrical generation and distribution system/philosophies such as (selection of Voltage levels LV/MV, initial short circuit calculations). • Design of Utility power connection and distribution schemes. • Design of Utility power and emergency generation/distribution systems by sizing and placement of generators and MDBs and Sub distribution boards. • Space marking layouts for electrical equipments and cable ducts requirements. • Detail Designing of Key SLDs and their protection and control Schemes considering Bus bar arrangements, couplers, operating scenarios, synchronization/transfer schemes etc). • Selection of control voltages for switchgear/Generators/BMS (UPS/DC rectifier), considering Power failure. • Detailed Electrical Design / layouts for Lighting, Power, Earthing, CCTV, Fire alarm, DATA, Telephone, Public address, Access Control & Lightning protection systems etc • Specifications and datasheets of Major electrical equipments for installation and procurement etc. • LUX level calculations on DIALUX. • Calculations for Earthing, Lightning protection systems. • Power cable schedule, selection of cables glands, Isolators etc. • Load Distribution Schedule. • Typical Installation details and sectional views. • Generation of MEP coordination layouts and Shop drawings. • Generating of BOQ and MEP technical tender package. • Review dossiers submittals & close-out activities and documentation management including As-Builts, O&M manuals, and Guarantee & Warranty certificates etc. PLANT ELECTRICAL DESIGN EXPERTISE • Formulation of load list considering package loads, P&IDs, Civil building and utilities requirements, HVAC, Fire fighting, generator auxiliaries and other electrical consumers. • Design/calculation/selection of Basic electrical generation and distribution system/philosophies such as (selection of Voltage levels LV/MV, initial short circuit calculations). • Selection of optimum location for generation/distribution systems by initial sizing and placement of generators and Distribution schemes. Selection of locations for power house and Main Distribution boards considering minimum cable lengths and Hazardous envelope. • Detail Designing of Key SLDs and their protection and control Schemes considering Bus bar arrangements, couplers, operating scenarios, synchronization/transfer schemes etc). • Selection of control voltages for switchgear/Generators/PLC/DCS (UPS/DC rectifier), considering Power failure and black start of plant etc. • Selection of Motor control mechanism Local and Auto mode interfacing with PLC/DCS/ESD/Load shedding Schemes. • Preparation of detailed Scope of works for EPC & PC packages, Electrical Design Basis of projects, specifications and datasheets of Major electrical equipments etc. • Detailed ETAP based Network Analysis for Short Circuit, Load Flow and Motor Starting. • Designing of sub distribution schemes for normal and emergency electrical users (UPS / DC rectifier). • Electrical design of Power house buildings and Switchgear/MCC rooms (Sizing of Rooms, Cable Route selection via cable trenches, cable cellar, cable trays segregating the distances between the different voltage level cables etc). • Plant Cable routing Layouts (Underground cable trenches, Overhead cable bridges, Cable trays/conduits network, cable entries to buildings, packages, skids, etc). • Marking of Hazardous Area Classification layouts as per API 500 and API 505 and Attended HAZOP sessions. • Design/Calculations for Earthing, NGR, Lightning protection systems. • Design for Plant lighting system, LUX level calculations, Sockets power distribution etc. • Power and control cable schedule, selection of cables glands, JB schedule. • Cathodic protection system for tanks & pipelines. • Providing instruction and support to electrical designers for the preparation of electrical equipment layout, cable routing plans, Power & Lighting layouts, grounding layouts, building electrification, typ installation detail drawings etc. • Generating RFQ with extraction of MTO and BOQ from design and providing procurement assistance. • 3D modeling of the electrical equipments to avoid clashes from other equipments and UG services coordination. • Confirms product performance by
Chinedum A.
Engineering Design Review Designer
Lagos, Nigeria
- AutoCAD
- 3D Models
- CAD Design
- SolidWorks
- Solid Edge
- 3D AutoCAD
- 3D Modeling
- Prototyping
- 2D & 3D Design
- Machine Design
- CNC Programming
- Autodesk Inventor
- Geomagic Design X
- 2D to 3D Modeling
- 3D Design Services
- Sheet Metal Design
- Reverse Engineering
- Reverse Engineering
- Engineering Modeling
- 2D and 3D CAD Design
- KeyShot 3D Rendering
- Tool Design Services
- 3D Rendering Services
- Mechanical CAD Design
- Mechanical Engineering
- 2D CAD Design Services
- Robotics Design Services
- Assembly Drawing Services
- Industrial Design Services
- Rapid Prototyping Services
- Mechanical Drawing Services
- SolidWorks Professional 2023
- Product Engineering Services
- Design for Assembly Services
- Drafting and Design Services
- SolidWorks Engineering Services
**Gig Title:** Expert in Reverse Engineering Modeling with SolidWorks, Autodesk Inventor, AutoCAD, and SolidEdge, Geomagic Dx **Gig Description:** Welcome to my gig! I am a highly skilled engineer sp... Read more
**Gig Title:** Expert in Reverse Engineering Modeling with SolidWorks, Autodesk Inventor, AutoCAD, and SolidEdge, Geomagic Dx **Gig Description:** Welcome to my gig! I am a highly skilled engineer specializing in reverse engineering modeling using industry-leading software like SolidWorks, Inventor, AutoCAD, and SolidEdge. With [9 years] of CAD experience, I offer top-notch services to transform your concepts, sketches, or existing products into detailed 3D models. **Services I Offer:** 1. **Reverse Engineering:** I can recreate and enhance existing products, prototypes, or components into accurate 3D models. 2. **Software Proficiency:** Expertise in SolidWorks, Inventor, AutoCAD, and SolidEdge ensures high-quality and precise modeling. 3. **Detailed Designs:** I provide detailed and realistic 3D models, suitable for prototyping, manufacturing, or presentations. 4. **File Formats:** Delivery of models in various formats for compatibility with different software and 3D printers. 5. **Collaborative Approach:** I believe in clear communication and collaboration, ensuring your ideas are accurately translated into the final design. **Why Choose Me:** - **Professionalism:** I prioritize professionalism, meeting deadlines, and delivering exceptional quality work. - **Experience:** Years of experience in reverse engineering and 3D modeling projects. - **Client Satisfaction:** My goal is your satisfaction. I work closely with clients to understand their requirements and exceed their expectations. - **Affordable Pricing:** Competitive and transparent pricing 1. **Discuss Your Project:** Contact me with your project details, sketches, or existing product photos. 2. **Project Evaluation:** I assess the project requirements and provide a quote and estimated delivery time. 3. **Modeling Process:** I start working on the 3D model, keeping you updated throughout the process. 4. **Review and Revisions:** You review the model, and I make revisions if necessary until you are satisfied. 5. **Final Delivery:** I deliver the finalized 3D model files in your preferred format. **Let's Turn Your Ideas Into Reality!** Ready to bring your concepts to life? Contact me today, and let's get started on your reverse engineering modeling project. I am committed to delivering high-quality, accurate, and visually appealing 3D models that meet your requirements.
Pancham A.
Engineering Design Review Designer
Edmonton, Canada
- CAM
- SAP
- ANSYS
- Welding
- CAD/CAM
- Autocad
- AutoCAD
- PV Elite
- PV Elite
- Oil & Gas
- Simulation
- CAD Design
- 3D Modeling
- Piping Design
- TEMA Standards
- Design Engineer
- ABSA Compliance
- Equipment Design
- Thermal Analysis
- Ansys Simulation
- Mechanical Design
- Vendor Management
- Welding Inspector
- Engineering Design
- Design Engineering
- Welding Inspection
- Engineering Design
- Mechanical Engineer
- Mechanical Drafting
- ASME Code Compliance
- HVAC Design Services
- Heat Exchanger Design
- CAD Drafting Services
- Mechanical CAD Design
- Pressure Vessel Design
- Mechanical Engineering
- Mechanical Engineering
- Structural Engineering
- Manufacturing Drawings
- Procurement Engineering
- 2D CAD Drafting Services
- Welding Inspection Design
- Mechanical Design Services
- Isometric Drawing Services
- FEA Finite Element Analysis
- Design Engineering Services
- Mechanical Drawing Services
- Computational Fluid Dynamics
- 2D to 3D Conversion Services
- Computational Fluid Dynamics
- Finite Element Analysis (FEA)
- Fabrication Drawings Services
- Engineering Project Management
- SolidWorks Engineering Services
Mechanical Engineer (PMP®, C.Eng.) with 20+ years of experience in pressure equipment design, engineering simulations, inspection, and project management for oil & gas, petrochemical, and power sector... Read more
Mechanical Engineer (PMP®, C.Eng.) with 20+ years of experience in pressure equipment design, engineering simulations, inspection, and project management for oil & gas, petrochemical, and power sectors. Expert in ASME, TEMA, CSA B51, ABSA codes, and tools like ANSYS, COMPRESS, PV Elite, and AutoCAD. Currently leading CanPro Process Services Ltd. (APEGA-certified) in Edmonton as Director and Project Manager—handling engineering design reviews, compliance checks, client coordination, and simulations. Skilled in managing full project lifecycles with cross-functional teams. Past experience includes managing multimillion-dollar EPC projects at Linde Engineering (India & Germany), delivering major savings: $6M saved on Baytown Ethylene Cracker (USA) – awarded Best Employee $17M total savings via cost optimization and vendor standardization Delivered Rock Spring (Ammonia Plant), Point Comfort (ASU), Toboltz (PP Plant) 9 years at Larsen & Toubro as Design Engineer, Planner, and Supervisor. Worked on vessels and heat exchangers for KNPC, Saudi Aramco, Shell, and ExxonMobil. Recognized for innovative cost-saving solutions on clean fuel and gasification projects. Skills: Mechanical design & simulation Code compliance (ASME, CSA, ABSA) Vendor & project coordination Quality audits, site inspection Procurement, costing & planning AutoCAD, PV-Elite, ANSYS, SAP Education: B.E. in Production Engineering Gold Medal – Advanced Diploma in CAD/CAM Diploma in Fabrication Technology Certifications: PMP®, Chartered Engineer (India) CWB Welding Inspector, WHMIS-2015, CSTS-09 Certification in Contract Law (Germany)
Paul R.
Engineering Design Review Designer
Arima, Trinidad and Tobago
- Piping
- CADWorx
- Autocad
- AutoCAD
- 3D Models
- CAD Design
- Smart P&ID
- Oil and Gas
- FEED Design
- Pipedata Pro
- 3D Modeling
- P&ID Drawings
- Piping Design
- CADWorx Plant
- CADWorx steel
- 3D Scan to CAD
- ASME Standards
- CADWorx Piping
- Hexagon Isogen
- 3D Model Review
- 3D Piping Design
- AutoCAD Plant 3D
- AutoCAD Plant 3D
- Plant 3D Modeling
- CADWorx Equipment
- Design & Drafting
- 2D to 3D Modeling
- As-Built Drawings
- Piping Engineering
- AVEVA (E3D / PDMS)
- Engineering Design
- Bidding & Proposals
- cadworx spec editor
- Piping Layout Design
- Shop Drawing Services
- Mechanical CAD Design
- Piping Stress Analysis
- Material Specification
- Bill of Materials (BOM)
- Piping Isometric Drafting
- Autocad Plant Spec Editor
- Point Cloud Modeling Services
Accomplished Lead Piping Designer with 29 years of extensive experience steering high-value greenfield and complex brownfield engineering initiatives across the oil and gas sector. Proven track record... Read more
Accomplished Lead Piping Designer with 29 years of extensive experience steering high-value greenfield and complex brownfield engineering initiatives across the oil and gas sector. Proven track record executing the entire project lifecycle—spanning FEED, Detailed Design, Construction, and As-Built documentation for onshore and offshore facilities. Recognized technical expert in engineering safety, constructability, and squad-check crossfunctional validation, consistently delivering technically rigorous piping solutions within strict budget and scheduling metrics.
Rajib C.
Engineering Design Review Designer
Kolkata, India
- Tekla
- AutoCAD
- Detailing
- Conveyors
- 3D Design
- CAD Design
- SolidWorks
- 3D Modeling
- 3D Rendering
- FEA Analysis
- 3D Modeling
- 2D & 3D Design
- Concept Design
- Equipment Design
- AutoCAD Plant 3D
- Mechanical Design
- Material Handling
- Autodesk Inventor
- 2D to 3D Modeling
- 3D Design Services
- Mechanical Drafting
- CAD Drawing Services
- CAD Drafting Services
- Mechanical CAD Design
- 2D CAD Design Services
- Manufacturing Drawings
- 2D CAD Drafting Services
- Machine Drawing Services
- CAD Digitization Services
- Mechanical Design Services
- Design Engineering Services
- Mechanical Drawing Services
- 2D to 3D Conversion Services
- Drafting and Design Services
- Simulation and Analysis Engineering
- Design for Manufacture and Assembly (DFMA)
My name is Rajib Chakraborty and I am a mechanical designer with experience in mechanical and bulk material handling systems. I have a strong background in 3D modeling, detail engineering and equipmen... Read more
My name is Rajib Chakraborty and I am a mechanical designer with experience in mechanical and bulk material handling systems. I have a strong background in 3D modeling, detail engineering and equipment design. I’m currently open to new opportunities as a Bulk Material Handling/Mechanical Designer in industries such as mining, oil & gas, cement, power, ports, or process plants. With hands-on experience in mechanical design, layout planning, and equipment detailing — including Stacker cum reclaimer, ship loader/unloader, wagon loader, wagon tripplers, twin boom stacker, various conveyors, hoppers, chutes, silos, and structural supports — I’m passionate about developing efficient, reliable, and cost-effective material handling systems. Key Skills: 2D & 3D Design (AutoCAD, Tekla 3D, Naviswork, AutoCAD Plant 3D, SolidWorks, Inventor, Solidedge) Conveyor & Transfer tower Design Open cast Mining and Yard Handling Equipment Design 3D model review Equipment Layout & Detailing Belt and Component Selection Fabrication Drawing Preparation GD&T Coordination with Mechanical & Structural Teams Steel plant equipment (Deep galvanizing line, 6 high mill, 4 high mill, accumulator etc.) Open to: Full-time / Remote opportunities If your organization is looking for a dedicated designer who brings both technical expertise and practical understanding of bulk material systems, I’d love to connect.
Victor V.
Engineering Design Review Designer
Fresno, United States
- CAD Design
- Civil Design
- AutoCAD Civil 3D
- AutoCAD Civil 2D
- Civil Engineering
- Autodesk Civil 3D
- Civil Engineering
- Civil CAD Designer
- General CAD Drafting
- PDF to DWG Conversion
- Civil Drafting Services
- Design Engineering Services
-Strong background and knowledge of Civil Engineering technical design such as roadway design and improvements, site development, grading and drainage, wastewater, stormwater drainage collection, wate... Read more
-Strong background and knowledge of Civil Engineering technical design such as roadway design and improvements, site development, grading and drainage, wastewater, stormwater drainage collection, water distribution systems. -Resident of California, US and HI with knowledge of applicable Federal, State, County and City regulations, standards and guidelines. -Excellent communication skills and ability to work independently and collaboratively with peers and all project stakeholders. -Dedication, effective problem solving, interpersonal and organizational skills to complete tasks and projects, with the flexibility to meet demanding work environment challenges. In addition to Civil Design and CAD support, I can also offer: -Technical QC review of Design Plans for Construction -Report Writing
Gustavo C.
Engineering Design Review Designer
Barra Mansa, Brazil
- CAM
- CAD/CAM
- CAD Design
- SolidWorks
- 3D Modeling
- Tool Design
- 3D Modeling
- Machine Design
- Product Design
- Machine Design
- Design Automation
- Mechanical Design
- Sheet Metal Design
- Engineering Design
- Engineering Design
- Transmission Design
- Mechanical Engineer
- Mechanical Drafting
- Fabrication Drawings
- Mechanical Engineering
- Mechanical Engineering
- Industrial Design Services
Hello, my name is Gustavo, I am a mechanical engineer, I'm working in the manufacturing industry in 25 years and 8 as a mechanical engineer. My main field of activity is associated with the developmen... Read more
Hello, my name is Gustavo, I am a mechanical engineer, I'm working in the manufacturing industry in 25 years and 8 as a mechanical engineer. My main field of activity is associated with the development of machines, components and design of metallic products. Ideally, I prefer to work in cooperation with my clients to create innovative and attractive designs. However, I am also able to review and update any project to make sure it's a viable product for the production, and, just as importantly, within your budget to produce. I have excellent knowledge and skills in SolidWorks product design Machine design, tool design, sheet metal design, fabrication drawings, 3D modeling. I can adapt my skills to most mechanical projects. The most important component of the project is to listen and understand what the customer wants. Then follow up with a solid solution and deliver it in time. When working with me at the beginning of your project, you are increasing the likelihood that your project will work. After all, the correct planned project leads to a process of simple and successful manufacturing. This saves time and money. I have a huge experience in the design of mass production parts from prototype concept to manufacturing of tool production, my focus is to implement my knowledge and acquire new professional experiences in a creative, independent, serious and motivated. My professional experience and its various stages developed knowledge both theoretical and technical areas of mechanical design and manufacturing (CAD, CAM), automation in mechanical, hydraulic, pneumatic and electronic systems, modernization of transmission systems, human protection in equipment and systems, metal linked to equipment and machines and other areas. Of course, I am working in strict confidence. You can count on the highest level of professionalism and a commitment to serve as part of your team. My creativity, skills and knowledge that you can see in my portfolio. You will see several projects in many areas contact me to take any questions. Gustavo Caride de Carvalho Mechanical Engineer
Kiran K.
Engineering Design Review Designer
Hyderabad, India
- API
- AutoCAD
- Machining
- Conveyors
- CAD Design
- Skid Design
- Tank Design
- Machine Design
- Concept Design
- Equipment Design
- Steel Fabrication
- Automotive Design
- Engineering Design
- Mechanical Drafting
- Fabrication Drawings
- Mechanical Engineering
- Production Optimization
- Design for Manufacturing
- Industrial Design Services
KOTA KIRAN KUMAR Contact: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒; Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Date of Birth: 20th July 1986 ________________________________________ DESIGN, COSTING, ESTIMATION, STRATEGIC PLANNING, P... Read more
KOTA KIRAN KUMAR Contact: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒; Email: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ Date of Birth: 20th July 1986 ________________________________________ DESIGN, COSTING, ESTIMATION, STRATEGIC PLANNING, PROPOSAL & OPERATIONS MANAGEMENT PROFESSIONAL Offering an impressive experience of over 6+ years in delivering optimal results and business value in demanding deadlines ________________________________________PROFILE Competent and experienced Production Management Professional with professional exposure of around 6 years in steering multifunctional & multilevel domains with a highly reputed business establishment. Specialized skills in Design, Costing & Estimation, Production Planning, Resource Planning, Quality Management & Commercial Operations to achieve Plant’s production and profitability objectives. Experience in Fabrication, Erection & Commissioning, Operation & Maintenance, Quality and Inspection of SS Storage and Blending Tanks, Pressure Vessels, Shell and Tube Heat Exchangers, Jacketed Tanks, Screw Conveyors, Piping. Knowledge on ASME Section VIII Division 1, ASME BPE, BS 5500, API 650. Ordering Out the High Lead Time Bought Items such as Raw Materials in SS, Geared Motors, and Pumps etc. Proficiency in Designing of the equipments as per the Client’s RFQ. Sound understanding of the Industrial Standards, ISO Procedures and Quality Management Techniques. Proven track record of making significant contributions by deploying and setting systems, implementing best practices and bringing about considerable cost reductions, while ensuring efficiency and quality benchmarks of the projects. Performance Milestones Credentials of performing as overall in charge for the Manufacturing of the Three Pasteurizers at the Shop Floor which involved Fabrication of the Skid, Heat Exchangers, SS Piping, Steams Setup and Condensate Setup, Machining Items, Inspection and Quality, Water Trial, and Dispatching of the Whole Unit to their Respective Plants. Even Carried Out the Erection and the Commissioning at their respective Plants. Developed ISO Standards for the Quality Department, when it was first introduced in the Company by preparing Documentation and setting up a foolproof system to achieve High Efficiency. Project In charge for a Fully Automatic Ghee Manufacturing Plant, to be setup by Amul, India at Waterloo, US. My work mainly involved selecting the Pumps, Valves, Designing of the Equipments, Skid, Piping and Walk Ways, Fabrication, Installation and Commissioning. Clients Handled Nestle Coca-Cola PepsiCo ITC UB Group Perfetti Parle Ranbaxy ATC Dansa Foods in Nigeria SBC, Tanzania Sayona, Tanzania Clear Pack, Singapore Key Assignments Handled Makson Industries Private Limited, Hyderabad, India Mars India Private Limited, Hyderabad, India. Unicorn Natural Products (P) Ltd, Hyderabad, India P&J Crate Chem Private Limited, Hyderabad, India. Taurus Chemicals Private Limited, Hyderabad, India Nestle India Private Ltd, Ponda, Goa, India. Nestle India Private Ltd, Pantanagar, Uttaranchal, India Ranbaxy Laboratories Private Limited, Paonta Sahib, HP. Nestle India Private Ltd, Pantanagar, Uttaranchal Hindustan Coca-Cola Beverage Pvt Ltd, Dasna, Ghaziabad, India. Hindustan Coca-Cola Beverage Pvt Ltd, Pirangut, Pune Bengal Beverages Private Limited, Dankhuni, Kolkata, India. Hindustan Coca-Cola Beverage Private Limited, Bidadi, Bengulure; Ameenpur, Hyderabad; Siliguri, West Bengal. General Electric L&T Mondelez Projects ________________________________________ PROFESSIONAL EXPOSURE UNICORN INDUSTRIES (P) LTD; since May’08 Design, Costing & Estimation Engineer; Sales and marketing since Feb’13 Instrumental in planning, scheduling wrt cost, resource deployment, time over-runs, quality compliance & manpower planning in line with the organization requirements; ensuring adherence to organization’s standards & procedures. Involve in problem identification, selection of appropriate technical solutions, materials, test equipment, and procedures, for the manufacture and production of safe, economical, high-performance products and services. Streamline new process concepts for production optimization, yield improvement & adopting new cost reduction techniques. Design of the Equipments as per Client’s RFQ, performing Costing and Estimation and Submitting Offers. Attend Technical and Commercial Negotiations with the Clients based on the Offer submitted. Quality, Maintenance and Machine Shop Engineer; Aug’11-Jan’13 Application of quality processes in a graded approach to the specific product or service. Participation in the development and review of project documentation. Direction and support for procurement activities. Application of testing and inspection activities to specific systems. Assessment of systems to identify deficiencies and participate in resolution of issues found. Strengthened the ISO Systems through streamlining and traceability. Production, Planning and Site Engineer; May’08-Jul’11 Spearheaded efforts across handling production planning & control thereby ensuring strict adherence to the time schedule, quality standards and total productivity maintenance whilst achieving pre-set production target. Planned & controlled all project activities connected with safe and efficient operations; implemented quality standards for meeting the set targets within time & cost parameters. Supervised production related tasks including planning, procurement, assembly, control and troubleshooting for achieving the planned periodic schedules. Ensured safety, regulatory and environmental compliance; coordinating with the government & statutory bodies for approvals, permissions and sections. Involved in Analyzing and understanding all aspects governing operational activities and up to date knowledge of latest technological advancements, regulations/ guidelines and compliances in the industry. Involved in production operations including finalization of technical specifications of plant equipment, staff selection, erection &commissioning of equipment, staff training, ISO, scheduling production & dispatch activities etc. Initiated and executed on-site job as per drawings & approved work methods. Acting as a single point of contact for main Technical Adviser on a site to the Technicians and Operatives. Prepared/reviewed method statements & work specific quality control plans. Prepared reports using MS Office. ________________________________________ ACADEMIC CREDENTIALS B Tech; 2007 Sree Visvesvaraya Institute of Technology, Mahabubnagar affiliated to JNTU, Hyderabad; 62.16% Computer Proficiencies: Microsoft Word, Excel and PowerPoint, AutoCAD Academic Project: Stress Concentration Factor of Different Shafts and its Reduction ________________________________________ Languages Known: English, Hindi and Telugu References: Available on Request
Mike Mahoney M.
Engineering Design Review Designer
Colorado Springs, United States
- CAD Design
- SolidWorks
- Mold Design
- 3D Modeling
- Product Design
- Ultimaker Cura
- Prototype Design
- Injection Molding
- 3D Design Services
- Product Development
- Mechanical 3D Design
- Prototype Manufacturing
- Rapid Prototyping Services
- 3D Models of Machine Parts
- Prototype Design Engineering
I have been working in the field of plastic injection molding and mold design for over 20 years and have been freelancing for another 4 years. It has been an interesting and challenging experience! My... Read more
I have been working in the field of plastic injection molding and mold design for over 20 years and have been freelancing for another 4 years. It has been an interesting and challenging experience! My main focus has been plastic injection molds, plastic components, tooling, fixtures and product development. I have done many product design projects in a variety of industries and look forward to having a discussion with you about your idea. Your project will be completed in a timely manner and with great attention to detail and functionality. I also can 3d print your product for evaluation and design review. less
Soliu Y.
Engineering Design Review Designer
Ibadan, Nigeria
- AutoCAD
- Drafting
- 3D Design
- CAD Design
- 2D AutoCAD
- 3D Modeling
- 2D Drafting
- Floor Plans
- CAD Drawing
- BIM Modeling
- CAD Drafting
- CAD Modeling
- CAD Designer
- 3D Modeling
- 2D AutoCAD 3d
- Product Design
- Autodesk Revit
- Design Engineer
- 2D CAD Drafting
- 3D CAD Modeling
- Landscape Design
- Civil Engineering
- As-Built Drawings
- Design & Drafting
- 2D to 3D Modeling
- As-Built Drawings
- Engineering Design
- Design Development
- Design Engineering
- Technical Drawings
- Autodesk Revit MEP
- 3D Design Services
- Engineering Drawing
- Design Optimization
- Concept Development
- Mechanical Engineer
- Architecture Design
- Engineering Reports
- Design Modifications
- HVAC Design Services
- Swimming Pool Design
- 3D Floor Plan Design
- CAD Drawing Revisions
- Construction Drawings
- BIM Modeling Services
- Structural Engineering
- Electrical Engineering
- Electrical Engineering
- Mechanical Engineering
- Structural Engineering
- Structural BIM Modeling
- AutoCAD Design Services
- Architectural Site Plans
- 3D Architectural Modeling
- Structural Steel Detailing
- Architectural BIM Services
- 2D Drawings and Floor Plans
- Engineering Technical Reports
I am a professional CAD Designer specializing in engineering design, 2D drafting, 3D modeling, technical drawing, and comprehensive CAD design solutions. I focus on transforming concepts, sketches, an... Read more
I am a professional CAD Designer specializing in engineering design, 2D drafting, 3D modeling, technical drawing, and comprehensive CAD design solutions. I focus on transforming concepts, sketches, and project requirements into accurate, practical, and professionally developed technical designs. With professional-level experience and familiarity with multiple CAD software platforms, I provide a wide range of design services tailored to different project requirements and client objectives. My Core Services Include: - 2D CAD Drafting and Technical Drawings - 3D CAD Modeling and Design Development - Engineering Design and Technical Documentation - Product Design and Concept Development - CAD Drawing Review and Evaluation - 2D and 3D Design Inspection - Engineering Drawing Review - CAD File Editing and Modifications - Technical Drawing Corrections - Design Optimization and Improvements - CAD Model Refinement and Revisions - Design Interpretation and Technical Visualization I understand that successful engineering design requires more than creating drawings. It involves accuracy, functionality, attention to detail, proper documenttion, and continuous refinement. Whether developing a new design from scratch or reviewing and improving an existing CAD project, I approach every assignment with professionalism and a commitment to delivering quality results. I value clear communication, client satisfaction, efficient project execution, and maintaining high standards throughout the design process. My goal is to help individuals, businesses, startups, and engineering teams turn their ideas into well-developed designs while providing reliable CAD support from initial concepts through design revisions and final deliverables. I welcome opportunities to collaborate on CAD design, engineering drafting, 3D modeling, technical drawing reviews, and design improvement projects.
Chander S.
Engineering Design Review Designer
Panchkula, India
- AutoCAD
- CAD Design
- Lighting Design
- Lighting Design
- Electrical Drafting
- Control Panel Design
- Electrical Engineering
- Urban Planning & Design
Since our incorporation in the year 2004, we are supported by experienced and talented team of Financial Analysts, Engineers, Drafts men, who holds expertise in planning and Designing of Substation, C... Read more
Since our incorporation in the year 2004, we are supported by experienced and talented team of Financial Analysts, Engineers, Drafts men, who holds expertise in planning and Designing of Substation, Cable & Panel Design, Electrical Consultancy and Earthing Services. Our expertise lies in: •Preliminary conceptual layout and design •Regulatory applications •Site selection, planning and permitting •Substation design •Substation project construction management •System and facility review and planning •Cable Sizing, Voltage Drop Calculation, Cable Scheduling, Cable tray selection etc. •Panel Design Services, Breaker Selection, Bus Bar Sizing, Short Circuit Rating etc. •Main/Submain wiring selection, conduit Selection, D.B. Sizing. •Single line Diagram, Layout Diagram •Technical Specifications, Control Panel Design Services •BOQ & Tender Document Preparation.
Ashraf I.
Engineering Design Review Designer
Lome, Togo
- Casting
- Robotics
- Drafting
- Machining
- CAD Design
- SolidWorks
- Prototyping
- 3D Modeling
- Injection Molding
- Mechanical Design
- Drafting Services
- 3D Solid Modeling
- 3D Design Services
- CAD Drawing Services
- CAD Drafting Services
- PDF to CAD Conversion
- Mechanical CAD Design
- Mechanical Engineering
- CAD Migration Services
- 2D CAD Design Services
- Manufacturing Drawings
- 3D Scan to CAD Service
- 2D CAD Drafting Services
- Machine Drawing Services
- Assembly Drawing Services
- SolidWorks Design Services
- Product Engineering Services
- SolidWorks Engineering Services
- CAD Redrafting and Conversion Services
- Mechanical Engineering Staffing Agency
About Asho Engineering Consulting Asho Engineering Consulting is an elite mechanical design and DFM partner serving clients across North America and Europe. We specialize in transforming complex engin... Read more
About Asho Engineering Consulting Asho Engineering Consulting is an elite mechanical design and DFM partner serving clients across North America and Europe. We specialize in transforming complex engineering challenges into precise, manufacturing-ready solutions. The Global Top 1% Advantage Unlike standard drafting services that rely on junior drafters, our team is composed entirely of degreed engineers. We house three Certified SolidWorks Experts (CSWE), a distinction held by only the top 0.1% of SolidWorks users globally. This ensures unmatched technical validation for even the most intricate systems. Our Core Expertise We provide comprehensive design services across diverse industries, including Automation & Robotics, MedTech, Consumer Electronics, and Industrial Equipment. Our capabilities include: Mechanical Design & DFM: Production-ready CAD for injection molding, machining, casting, and sheet metal. Advanced Engineering: Tolerance stack-up analysis (ASME Y14.5), GD&T application, and motion/interference validation. Complex Assemblies: Specializing in multi-axis robotic systems, precision fluid power components, and ergonomic housings. Why Partner With Us? Quality First: Our structured, multi-level internal review process means we aim for production-ready deliverables from the very first iteration, reducing your prototyping costs by up to 40%. Data Security: Your IP is protected by ISO-aligned data governance, including multi-factor authentication and isolated secure NAS storage. Scalability: We act as a seamless extension of your internal team, absorbing engineering peaks without the need for headcount growth. Let’s turn your concept into a validated, manufacturable reality.
Gokhan M.
Engineering Design Review Designer
Mersin, Turkey
- CAD Design
- General Design
- Engineering Design
- HVAC Design Services
- Mechanical Engineering
- Solar Panel Drawing Plans
- Design Engineering Services
- Fire Sprinkler Drawing Services
- Mechanical Engineering Staffing Agency
Design review, design simplification and troubleshooting, cost estimate, contract management, ı&o management, rfi-submittal preparation, commissioning management.
Design review, design simplification and troubleshooting, cost estimate, contract management, ı&o management, rfi-submittal preparation, commissioning management.
Paolo P.
Engineering Design Review Designer
Cardiff, United Kingdom
- CAD Design
- Geotechnical
- Structural Design
- Civil Engineering
- Civil Engineering
- Structural Engineering
- Structural Engineering
- Environmental Engineering
Paac geotechnical consulting is located in Cardiff , 33 Plantagenet street CF116 AS Cardiff U.K. ; Website: http://imppitasi.wix.com/geotechnical; Legal form: Sole trade . It is a young firm which... Read more
Paac geotechnical consulting is located in Cardiff , 33 Plantagenet street CF116 AS Cardiff U.K. ; Website: http://imppitasi.wix.com/geotechnical; Legal form: Sole trade . It is a young firm which provides a comprehensive specialist consulting service in geotechnical field to a wide range of clients including consultants, contractors, government departments and agencies, private and public companies, legal practices and research organisations. His approach is to offer a affordability of service , identifying alternative options that could result in savings to project cost. You will find in it the expertise and professionality of a large structure, but the flexibility, availability and affordability of services typical of a small team . Thus, it can give you the followings geotechnical services for managing the geotechnical risk through the different stages of a project : - Statement of Intent (SOL)( Initial review ); - Primarily Sources Study Report (Desk Study) or (PSSR) and Geotechnical investigation report ( GIR )( Preliminary certifications) - Geotechnical Design Report or (GDR) and Strengthened Earthworks Appraisal Form (SEAF) with these kinds of structural designs: Retaining walls in reinforced concrete and in contiguous piles with Rock anchors; Shallow and deep foundations; Piled raft foundations; Analysis stability of slopes and excavation fronts; Techniques for improving stability and safety of slopes: nailing soil, horizontal reinforcement; Calculation of embankment stability and settlement; Roads and pavement engineering Hydraulic adjustment of soil; Techniques of soil improvement; - Geo - Environmental Interpretative report; - Site supervision; - Training courses via ▒▒▒▒▒ on geotechnical topics for companies , consultants and students; If you need of a quote of its services, you can send him an email .
Sandip P.
Engineering Design Review Designer
Ahmedabad, India
- Rendering
- CAD Design
- SolidWorks
- 3D Rendering
- 3D Modeling
- Product Design
- CAD Conversion
- Machine Design
- Mechanical Design
- Design & Drafting
- Engineering Design
- Power Tools Design
- Engineering Design
- 3D Design Services
- Reverse Engineering
- Mechanical Drafting
- General CAD Drafting
- CAD Drawing Services
- 3D Rendering Services
- PDF to DWG Conversion
- Mechanical Engineering
- 2D to 3D Conversion Services
Hire vetted design talent
Get a free estimateLast updated: Nov 22, 2026
How it works
Get a free estimate
Vetted design talent
Accuracy guarantee
FAQ for Hiring Engineering Design Review Designers
Skills similar to Engineering Design Review
- 3D Modeling Designers
- 3D Rendering Designers
- ANSYS Designers
- AutoCAD Designers
- Blender Designers
- CAD Designers
- Design Engineer Designers
- FEA Designers
- Mechanical Design Professionals
- Mechanical Engineer Designers
- Mechanical Engineering Designers
- Product Design Professionals
- Product Development Designers
- Rendering Designers
- SolidWorks Designers
Browse Engineering Design Review Services
- Mechanical Engineering Services (10,640)
- Product Engineering Services (2,015)
- Prototype Design Engineering Services (3,244)
- Engineering Design Services (7,250)
- Electrical Engineering Services (1,542)
- Design Engineering Services (4,641)
- Concept Design Services (5,770)
- DFM Services (681)
- Computational Fluid Dynamics Services (1,136)
- Design for Assembly Services (1,968)
- 3D Product Modeling Services (7,190)
- Mechanical CAD Design Services (8,928)