Hire the best freelance Electronics Schematics Design expert designers for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

I am an Electronics Hardware and Embedded Systems Engineer with hands-on experience in schematic design, PCB layout, embedded hardware, sensor integration, and wireless communication. I have worked o... Read more

I am an Electronics Hardware and Embedded Systems Engineer with hands-on experience in schematic design, PCB layout, embedded hardware, sensor integration, and wireless communication. I have worked on IoT Gateway projects using Quectel Cat-1/Cat-4 modules, ESP32 and Microchip processors, along with RS-485, Ethernet, Wi-Fi, and BLE interfaces. My experience also includes power management, sensor interfacing, analog circuits, and hardware bring-up. I have also worked on a wearable AR/VR haptic-feedback device using flex sensors, wireless communication, and haptic actuators, covering both hardware and firmware integration. My main tools include Altium Designer and KiCad. I can handle projects from schematic capture and component selection through PCB layout, DRC, Gerber generation, BOM, manufacturing files, prototype bring-up, and hardware debugging. I focus on practical, reliable, and manufacturing-ready designs rather than just completing the PCB layout.

I design electronic products, combining PCB design, embedded hardware and enclosure development. Main focus is helping to design products that are ready for manufacturing and real usage. I am student... Read more

I design electronic products, combining PCB design, embedded hardware and enclosure development. Main focus is helping to design products that are ready for manufacturing and real usage. I am student of Faculty of Electrical Engineering, where I learned and worked with software for designing and simulating semiconductor components, such as diodes, MOSFETs etc, as well as PCB design, embedded programming and embedded hardware development. Also, I have experience in jobs in the profession as I worked as R&D engineer, where my main focus was embedded programming and hardware development and as test engineer, where my main focus was to test electronic devices on various tests that aligns with test that are done in certification houses to check if devices would pass those certification house test and internal standards, such as EMI, resistance to electrical disturbances and many more. My portfolio includes: -various development boards (with STM32 and ESP32 microcontrollers); -USB 2.0 Hub with 4 outbound USBs, with full enclosure design; -Clock project with RP2040 microcontroller, light sensor, addresable LEDs, with full enclosure design; -ESP32 IoT project - includes relay, LED driver, humidity and temperature sensor, GPIO pins for additional peripherals; -Buck Converter - 9-36V input to 5V output with main focus on automotive compatible components. Skills I gained over the years while studying and working on jobs in the profession are: -PCB (Schematic, Layout) Design; -Embedded Hardware Design; -Microcontroller-Based Systems (STM32, ESP32, RP2040); -Power Supply Design; -Enclosure Design; -Prototype Development; -DFM; -Product Integration; -Hardware Debugging. Software I am skilled in: -Altium Designer; -KiCad; -EasyEDA; -Solid Edge; -LTSpice.

As a DAE in Electronics with 03 years at the Pakistan Navy's Naval Precision Electronics Complex (NPEC), I specialize in precision multi-layer PCB design, ensuring optimal signal/power integrity and D... Read more

As a DAE in Electronics with 03 years at the Pakistan Navy's Naval Precision Electronics Complex (NPEC), I specialize in precision multi-layer PCB design, ensuring optimal signal/power integrity and DFM/DFT adherence. My experience in mission-critical systems, including advanced radars and sonars, demonstrates a strong capability in complex electronic troubleshooting and problem-solving, making me adept at delivering robust and reliable designs for diverse projects.

I am an Electrical and Electronics Engineer with experience in electrical system design, circuit analysis, and engineering documentation. I am proficient in SolidWorks, Proteus, and EPLAN, with the ab... Read more

I am an Electrical and Electronics Engineer with experience in electrical system design, circuit analysis, and engineering documentation. I am proficient in SolidWorks, Proteus, and EPLAN, with the ability to develop electrical schematics, simulate circuits, create technical drawings, and support engineering design projects. I hold a Bachelor's degree in Electrical and Electronics Engineering and have over four years of professional experience solving technical challenges with accuracy and attention to detail. My expertise includes electrical design, PCB simulation, control systems, troubleshooting, and technical documentation. I am committed to delivering high-quality, reliable work on time while maintaining clear communication throughout every project. Whether you need electrical designs, circuit simulations, engineering drawings, or technical support, I am ready to help turn your ideas into practical solutions.

I am an Electronics and Electrical Engineer, graduated from the University of Peradeniya, Sri Lanka, with over 6 years of hands-on experience in PCB design and fabrication. I specialize in advanced ha... Read more

I am an Electronics and Electrical Engineer, graduated from the University of Peradeniya, Sri Lanka, with over 6 years of hands-on experience in PCB design and fabrication. I specialize in advanced hardware development for embedded systems, IoT devices, control systems, and high-performance computing platforms. My portfolio includes: Motherboard design for NVIDIA Jetson modules STM32-based flight controller PCBs High-accuracy RTK GPS modules Raspberry Pi sensor shield designs High-power motor controllers Expertise in high-speed signal routing (PCIe, USB 3.0, HDMI, CSI) I provide end-to-end PCB design services—from concept to production—including schematic capture, layout, signal integrity, fabrication support, and consulting. I am passionate about solving complex hardware problems and bringing ideas to life through innovative, real-world applications. Whether you need a robust embedded system, a high-speed PCB, or reliable design consultation, I am ready to collaborate and deliver high-quality results.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

I have a very wide variety of skills including 3D design and drafting, embedded software design, PCB and circuit design, and time efficient prototyping to deliver a functional product.

Aleksandar M. @aleksandarm72 Senior Electronics,PCB and Graphic Designer $30 USD / Hour Senior Electronics Specialist | From Circuit Design to finished PCB ,GRAPHIC DESIGNER Are you looking for a sp... Read more

Aleksandar M. @aleksandarm72 Senior Electronics,PCB and Graphic Designer $30 USD / Hour Senior Electronics Specialist | From Circuit Design to finished PCB ,GRAPHIC DESIGNER Are you looking for a specialist who understands both design and manufacturing? I am an engineer who bridges the gap between a digital drawing and a finished physical product. With extensive experience in CAM software and hardware design, I provide reliable solution for clients and workshop owners. ELECTRONICS & PCB DESIGN: Using CadSoft Eagle Pro or Autodesk EAGLE (and on demand Altium designer and KiCad), I focus on creating robust electronic designs that are practical end economic to manufacture and service.Working on Arduino,esp32 or on high power and high voltage devices ,etc…digital on analog it doesn't matter. * Designing schematics and PCB. layouts for controllers, sensor interfaces, power units,high freq.devices ,etc.. or working by schematic from the customer * Preparing full manufacturing packages ready for PCB fabrication houses,including Gerber and Excellon files,BOM list and anything else on demand. * I understand electromagnetic interference (EMI) in everyday environments—a critical factor for electronics stability that many designers overlook. For over 25 years I have opportunity to work on countless projects and have seen all kind. of professional solutions from which I learn the best practices in PCB design so you will get the best possible schematic and PCB design. CNC EXPERTISE: I don’t just generate toolpaths; I optimize the entire production process. I consider your specific tooling, feed rates, and machine rigidity to ensure the best possible finish. GRAPHIC DESIGNER & SENIOR VISUAL DESIGNER Brand Identity & Technical Illustration Specialist Profile Overview: Your brand identity is the first thing your clients trust. I provide high-level visual solutions that combine 25 years of engineering precision with modern, minimalist design aesthetics. My goal is to deliver "production-ready" assets that work across all media—from favicons to billboards. What you will receive by partnering with me: • Strategic Logo Design: Professional, minimalist identities built on solid color theory (Specialist in Blue/Corporate palettes). • Marketing Assets: High-impact banners, posters, and social media kits designed for maximum engagement. • Technical Illustration: 100% manual vectoring (Adobe Illustrator) of complex machinery and exploded views. • Print-Ready Precision: Perfectly organized AI, EPS, and SVG files, ensuring zero issues during scaling or printing. Why my 25 years of experience matters: With over two decades in electromechanical and industrial design, I bring a "functional eye" to every project. I don't just draw; I ensure your visual materials communicate authority and professional stability

With 30 years of experience in robotics automation and engineering design, I bring my knowledge and expertise with me. I specialize in the fields of Medical Devices, Automotive and Injection Molding.

With 30 years of experience in robotics automation and engineering design, I bring my knowledge and expertise with me. I specialize in the fields of Medical Devices, Automotive and Injection Molding.

A Senior IoT Engineer with a strong focus on end-to-end embedded systems and hardware design, from concept to production. My core strength is in PCB/EDA design (Altium Designer, EasyEDA), combined wi... Read more

A Senior IoT Engineer with a strong focus on end-to-end embedded systems and hardware design, from concept to production. My core strength is in PCB/EDA design (Altium Designer, EasyEDA), combined with practical experience building real-world IoT devices that have to work reliably outside of lab conditions. I’ve designed systems involving power management, sensor integration, wireless communication (BLE, Wi-Fi, cellular), and low-power optimization. I regularly work on: Custom PCB design (schematic, layout, Gerbers, BOM) Embedded systems using ESP32, STM32, and similar MCUs Power electronics (buck/boost, battery systems, USB-C, thermal considerations) Communication protocols (BLE GATT, I2C, SPI, UART, Modbus) Debugging and improving existing hardware (thermal issues, noise, stability) I’ve also supported projects that required tight constraints—small form factor boards, battery-powered systems, and harsh environment designs—where reliability and efficiency matter more than just “making it work.” Beyond hardware, I understand the full IoT stack and can align firmware, hardware, and system behavior to ensure everything works together cleanly. If you already have a design, I can help refine and fix it. If you’re starting from scratch, I can take it from idea to a production-ready board.

Turning Complex Robotic Systems into High-Precision, Production-Ready SolidWorks Designs. If you are looking for a specialist in complex mechanical systems and innovative robotics design, you are in t... Read more

Turning Complex Robotic Systems into High-Precision, Production-Ready SolidWorks Designs. If you are looking for a specialist in complex mechanical systems and innovative robotics design, you are in the right place. With years of hands-on experience in SolidWorks, I specialize in transforming ambitious mechatronic concepts into fully functional, manufacturable, and stress-tested 3D models. 🏆 Proven Track Record in International Robotics Competitions: Eurobot 2026 Winner (Spain - June 2026): Won first place with advanced robots that I fully designed mechanically from scratch. Participant & Winner in Recognized Competitions: Designed and developed competition-grade robotic systems proven to perform under intense pressure and rigorous engineering standards. 🔧 Core Expertise & Key Deliverables: Complex Systems Specialist: Designing intricate mechanisms, multi-axis robotic arms, autonomous mobile robots (AMRs/AGVs), and precision motion setups requiring tight mechatronic integration. SolidWorks Mastery: Advanced 3D parametric modeling, complex sheet metal design, advanced surfacing, dynamic motion analysis, and stress simulation. Design for Manufacturing (DFM/DFA): Optimizing models for 3D printing, CNC machining, sheet metal fabrication, and rapid assembly to reduce production time and costs. Complete Deliverable Packages: Clean STEP/IGES CAD files, production-ready 2D engineering drawings with GD&T, exploded assembly views, and high-quality photorealistic renders for pitch decks. Whether you need a full robot prototype designed from scratch or a complex mechanism optimized for production, I deliver clean, robust, and highly functional designs on time, every time. Let’s turn your complex ideas into seamless reality. Click "Invite to Job" or send me a message to discuss your project!

Designer with expertise in AutoCAD. I have designed various floor plans and building plans. Also Network Equipment Designing is also one pf my expertise

Designer with expertise in AutoCAD. I have designed various floor plans and building plans. Also Network Equipment Designing is also one pf my expertise

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My dai... Read more

With 25 years of experience, I design commercial and industrial products taking care of all the requirements and features of the design, prototyping and manufacturing. Italian living in Spain. My daily job is investigation and development of new technologies. You can benefit from my expertise if you are in need of innovation or you have an idea that nobody can't make it real. I provide better technologies, better ideas and better problems solving. I am a skilled electronic engineer, multi-language developer, inventor, circuit designer. I have a background of Linux/BSD servers admin and networks admin. My work ranges from developing space-grade electronic prototypes, deploying and managing large-scale data networks of IoT sensors to autonomous robotics design with AI. I love to get involved in projects with different technologies. I am constantly updated on new technologies and electronic trends. I am a good advisor on the best technologies you should integrate into your next project. I have a company about IoT sensors, custom circuit designs, autonomous robotics, and web API for data gathering and visualization through web services. One of my most relevant projects was the design of the avionics for a space satellite. During the development, I was able to integrate the top-quality components and adopt the most refined engineering methodologies. I am an outstanding project manager with excellent orders logistic, time scheduling, and employee management. I know how to design electronic circuits and how to optimize the PCB layouts for to pass compliance tests for the emission certification as per CE, FCC, UL regulations. My experience includes: -nRF52/53/54 bluetooth BLE chips from Nordic -nRF9161/51 LTE SoC with CAT-M1 and NB-IoT -ARM Cortex-M33 specialist -ultra low power IoT designs with LTE, LoRa, Bluetooth and 5uA during sleeping -IoT designs with sensors of any type -IMU fusion and motion sensors -Beaglebone Black, Raspberry PI, ODROID -Arduino, Teensy3.2+3.6+4.x, Spresense -design and firmware with NXP, STM32, Nordic, TI, Silabs ARM Cortex-M MCUs -Multilayer PCB layout designs -XBEE, Bluetooth BLE, WIFI, LTE -LoRa and LoRaWAN transceivers design with Semtech RF chips -Iridium sat embedded modems -Autonomous robots, ocean and ground -Wearable devices -Tracking devices with sensor -Solar panels design -Lithium battery rechargers with safety -Industrial heavy duty protocols and power electronics -Encoders and motor drivers -Automotive electronics design -Aerospace electronics, RF and avionics design -Machine learning on MCUs -CAN bus, RS485, 5-20mA protocols -Audio MIDI instruments design -DSP algorithms -Heterogeneous multicore architectures -JTAG, SWD, GDB, openocd, Segger J-Link -Jetson platforms from NVIDIA -Allied Vision cameras -CAD with FEM analysis -3D printed enclosures for electronics Software and firmware programming: -Zephyr RTOS on Nordic RF SOCs -Nuttx RTOS -custom embedded Linux OS with Yocto project -Linux OS (Raspberry PI, ODROID, ARM based) and servers: Ubuntu, Debian and ArchLinux -FreeBSD, NetBSD on embedded boards and servers -AI, machine learning, TinyML specialist -computer vision on NVIDIA Jetson boards. -PX4, MAVLINK, ROS and GAZEBO simulator -Python, C, C++, LUA, Perl -REST API via HTTPS and authentication -MATLAB, Octave, NumPy I can create custom RF circuits and antennas on PCB. I can run the required math and to provide the best impedance matching network. I can test the final RF circuit with my Vector Network Analyzer (VNA). I am specialist of IoT/LoRa/LTE frequencies. I do microelectronics SMT soldering and prototyping in my lab. I place components using a professional microscope. I mount components with dimensions down to 0402 or BGA type. I have good contacts in the industry for PCBs fabrication and for the massive production in different parts of the world. I do machine learning (AI) in microcontrollers installing into the firmware the inferences. I do training in the cloud. I am a specialist of TinyML on ARM Cortex-M33 MCUs. I am honored to be a returning, invited speaker for the BSD foundation, where I discuss BSD operative systems worldwide at annual conventions in Europe and North America. I have a private git server to manage all the files of my customers as remote accessible repositories so they can track the status on a daily basis. My monthly flat rate is 8000 Euro. I begin to work with an initial upfront payment, fully released of about the 30% of the total value of the project. I prefer to work at long term projects to take care of all the features and all the design process. I am also available for preliminary feasibility studies of new products with a final PDF report. I am the owner of a legal registered business in Spain to pay taxes and to provide all the engineering services. All the PDF invoices I send are declared and legal. Local EU regulations impose to send the PDF invoice to my customers to document the funds received.

Dynamic Electrical Engineer specializing in nuclear instrumentation systems, skilled in programming, and experienced in QA. Expertise in designing and implementing neutron instrumentation systems for... Read more

Dynamic Electrical Engineer specializing in nuclear instrumentation systems, skilled in programming, and experienced in QA. Expertise in designing and implementing neutron instrumentation systems for nuclear reactors. Proficient in Python (pandas, matplotlib, numpy, tkinter) and C++, enabling efficient development of plugins, firmware, data analysis, and data visualization. Demonstrated ability to lead teams and manage budgets as a Semi Senior Engineer, overseeing projects with budgets of approximately USD 500,000 and around 25,000 man-hours. Committed to delivering high-quality solutions that make a meaningful impact. Adept at problem-solving and collaborating in team environments.

I am an Electrical & Electronic Engineering undergraduate with a strong interest in embedded systems, electronics, robotics, and automation. I have hands-on experience with C/C++, Python, Arduino, ESP... Read more

I am an Electrical & Electronic Engineering undergraduate with a strong interest in embedded systems, electronics, robotics, and automation. I have hands-on experience with C/C++, Python, Arduino, ESP32, Raspberry Pi, PCB design, MATLAB/Simulink, ROS 2, and Linux. I have worked on projects involving embedded systems, PCB design, IoT, robotics, and automation, developing practical skills in both hardware and software. I am a motivated and enthusiastic learner who enjoys solving technical problems and developing practical engineering solutions.

Designer, artist and engineer with diverse multimedia experience including graphics, photography, motion, lighting, audio, electronics, embedded systems and more.

Designer, artist and engineer with diverse multimedia experience including graphics, photography, motion, lighting, audio, electronics, embedded systems and more.

Work Sample: 1) My recent PCB Layout design in OrCAD: https://drive.google.com/file/d/1c9eKgUgZAbZCvoeH8IWq9DLh5roFwF_u/view?usp=sharing 2) Another design : This one is an example of reverse-engineer... Read more

Work Sample: 1) My recent PCB Layout design in OrCAD: https://drive.google.com/file/d/1c9eKgUgZAbZCvoeH8IWq9DLh5roFwF_u/view?usp=sharing 2) Another design : This one is an example of reverse-engineered PCB board designed in OrCAD. https://drive.google.com/file/d/1Yoo9x9a86COWYb8JUqIzsZAD0ANM5VU3/view?usp=sharing

I am a skilled PCB design specialist with extensive experience in creating high-quality, reliable, and efficient printed circuit board layouts for a wide range of applications, including consumer elec... Read more

I am a skilled PCB design specialist with extensive experience in creating high-quality, reliable, and efficient printed circuit board layouts for a wide range of applications, including consumer electronics, IoT devices, industrial systems, and embedded solutions. My expertise spans the entire PCB design process—from schematic capture and component selection to layout optimization and design verification—ensuring your product meets both functional and manufacturing requirements. I work with industry-leading tools such as Altium Designer, KiCad, Eagle, and OrCAD, and I strictly follow DFM (Design for Manufacturing) and IPC standards to guarantee precision and cost-effectiveness. Whether you need single-layer, multi-layer, or high-speed PCB designs, I can deliver tailored solutions that prioritize performance, durability, and compliance with regulatory standards.

I am a professional Electronics Engineer specializing in power electronics, high-voltage systems, and embedded hardware design. With a strong background in applied R&D and precision industrial manufac... Read more

I am a professional Electronics Engineer specializing in power electronics, high-voltage systems, and embedded hardware design. With a strong background in applied R&D and precision industrial manufacturing, I provide end-to-end electronic design services: from initial architecture and schematic capture to PCB layout, 3D mechanical integration, and DFM (Design for Manufacturing) optimization. Currently working with high-precision electrical measurement instruments in Canada, I bring a meticulous, lab-tested approach to every freelance project. I don't just route boards; I ensure they are reliable, safe, thermally optimized, and ready for production. Core Competencies & Services PCB & Hardware Design: Schematic capture and complex routing using KiCad, DipTrace, and Altium Designer workflows. Mechanical integration and enclosure planning using Autodesk Fusion 360. Power & High-Voltage Electronics: Design and simulation of resonant converter topologies, high-voltage pulse-power systems, and SiC switching stages. Custom magnetics and transformer design. Embedded Hardware & Board Bring-up: Designing robust schematics around STM32, ESP32, TI C2000 and TI SimpleLink architectures. I also write test firmware (C/C++) using STM32Cube, Code Composer Studio (CCS), and Arduino IDE for board bring-up. I can validate hardware functionality, verify communication buses (I2C, SPI, UART), and ensure stable power stages before handing the fully tested project over to your software team. Simulation & Diagnostics: Advanced circuit simulation (LTspice, ANSYS, FEMM) and comprehensive bench-level fault isolation for analog, digital, and mixed-signal boards. Whether you need a quick custom PCB breakout board, a complex high-voltage power supply, or rigorous fault diagnostics, I deliver high-quality, production-ready results. Note: I am permanently based in Ontario, Canada (EST) and dedicate my Fridays through Sundays exclusively to freelance and contract work, ensuring highly focused and uninterrupted progress on your projects.

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and So... Read more

Amogh Technopreneures LLP provides end to end technology solution in various area like Industrial and Scientific Product developments, Printed Circuit Boards Layout design, Electronics Hardware and Software developments, Commercial Interior / Exterior Lighting product design and manufacturing. We possess following technical domain expertise. · Multi layer PCB Design and development · Flexible PCB Design for Wearable electronics · Customize boards for GPS, Time of Flight (ToF) sensors. · Customize boards for Langmuir Probe biasing, Ramp Generator,Pulse power circuits. · Customize high speed ADC boards for various scientific experiments · Customize Data Logger and Data Acquisition system. · Embedded Software/Hardware system development for an application area like Robotics, Instrumentation,Automation and Aviation. · Fiber Optic based data links for analog and digital signal for instrumentation · Customized micro controller like AVR,Cortex,PIC, based development board design · Circuit design and development of various applications for accurate measurement of time/frequency/pulses. · Customized Embedded Software, Circuit designs and development for various sensors like temperature (RTD/TC), ultrasonic, capacitive, acoustic, optical,ToF etc. · Customized Embedded Software, Circuit designs and development for IMU sensor's Magnetometer, Gyroscope , Accelerometer etc. · Power supply design like Linear or SMPS (buck/boost) etc. · Analog and Digital Circuits design and development · Wearable electronics product design · LED Lights and Driver circuit design · Wireless/ RF circuits design · Electronic Component Supplier

Experienced Research&Development Electronics Engineer with a demonstrated history of working in the automotive industry. Skilled in Electronics, Analytical calculations approach, Hardware design (Alti... Read more

Experienced Research&Development Electronics Engineer with a demonstrated history of working in the automotive industry. Skilled in Electronics, Analytical calculations approach, Hardware design (Altium Designer), Simulations in LTSpice and Matlab. Strong engineering professional with a Ph.D. focused in Electrical Engineering (Power Electronics).

[Mahmoud Gamal] Hardware Design Engineer | PCB Design | Electrical Engineering Dear LinkedIn Network, I am excited to announce my role as a Hardware Design Engineer with expertise in PCB design and... Read more

[Mahmoud Gamal] Hardware Design Engineer | PCB Design | Electrical Engineering Dear LinkedIn Network, I am excited to announce my role as a Hardware Design Engineer with expertise in PCB design and electrical engineering. With a passion for transforming ideas into tangible products, I thrive on tackling complex challenges and collaborating with cross-functional teams to deliver innovative hardware solutions. Throughout my career, I have gained extensive experience in designing and developing high-quality electronic systems. My expertise lies in schematic design, PCB layout, signal integrity analysis, and component selection. I am well-versed in using industry-standard design tools such as Altium Designer and have a strong understanding of PCB manufacturing processes. I have successfully contributed to the development of cutting-edge products across various industries, including consumer electronics, telecommunications, and industrial automation. My strengths lie in translating product requirements into robust hardware designs, optimizing performance, and ensuring compliance with industry standards and regulations. In addition to my technical skills, I am a highly collaborative and proactive team player. I thrive in fast-paced environments, adapt quickly to new technologies, and have a keen eye for detail. I believe in continuous learning and staying updated with the latest advancements in hardware design and engineering. If you are seeking a dedicated and skilled Hardware Design Engineer to drive innovation and contribute to your organization's success, I would welcome the opportunity to connect. Let's explore how my expertise and passion for hardware design can add value to your team. Thank you for taking the time to read my LinkedIn profile. I look forward to connecting with professionals who share similar interests and goals. Check my GitHub link:- https://github.com/mhmwd83

Professional PCB electronic designer, test & development Expertise ​Derived from over 10 years of field experience in Switzerland and Italy

Professional PCB electronic designer, test & development Expertise ​Derived from over 10 years of field experience in Switzerland and Italy

I am an Electronics Hardware Engineer and the Founder of SYNTIQ TECHNOLOGIES, an engineering design firm focused on developing reliable electronic products for industrial, transportation, medical, and... Read more

I am an Electronics Hardware Engineer and the Founder of SYNTIQ TECHNOLOGIES, an engineering design firm focused on developing reliable electronic products for industrial, transportation, medical, and IoT applications. I specialize in designing high-performance embedded hardware, from concept through production, helping startups and companies accelerate product development while reducing technical risks. My expertise includes: • High-Speed PCB Design • DDR4 / DDR5 • PCIe, USB, Ethernet • Signal Integrity & Power Integrity • Embedded Systems • STM32, NXP, Renesas, TI • IoT Devices • Edge AI Hardware • Design for Manufacturing (DFM) • Design for Testability (DFT) Through SYNTIQ TECHNOLOGIES, I provide complete hardware development services, including architecture, schematic capture, PCB layout, prototype support, and manufacturing documentation.

End-to-end PCB design: from schematic to multi-layer layout (up to 6 layers) High-speed interface design and power management integration Component library creation and BOM management Manual PCB as... Read more

End-to-end PCB design: from schematic to multi-layer layout (up to 6 layers) High-speed interface design and power management integration Component library creation and BOM management Manual PCB assembly: 0201, 0402, QFN, QFP, BGA packages Firmware-ready hardware development for microcontrollers: STM32, NRF52, ESP32, AVR, BG95, and more Integration of sensors (accelerometers, gyroscopes), audio amps, chargers, and power converters Support for communication interfaces: I2C, SPI, UART, USB, CAN, MIPI DSI

I’m an AI/Deep Learning Engineer with experience in electronics and PCB design, and I’m currently building AI-powered tools for automating parts of the PCB design workflow. I can help with **KiCad an... Read more

I’m an AI/Deep Learning Engineer with experience in electronics and PCB design, and I’m currently building AI-powered tools for automating parts of the PCB design workflow. I can help with **KiCad and Eagle component libraries, symbols, footprints, and schematic generation**, using an AI-assisted workflow that can **often CUT THE TIME required for library and schematic work by up to 50%**, while retaining human review and verification. This includes: * Creating symbols and footprints from datasheets * Generating and validating component libraries * Creating and modifying KiCad/Eagle schematics * Connecting components, nets, labels, and multi-sheet schematics * Reviewing libraries and schematics for common errors and inconsistencies * Converting and working across KiCad and Eagle formats I’m also the developer of FootprintAI, an AI agent for PCB design that generates component libraries and schematics from datasheets or natural-language descriptions. It currently supports native KiCad (.kicad_sym, .kicad_mod, .kicad_sch) and Eagle (.lbr, .sch), with Altium support planned. FootprintAI (footprintai.net) provides the broader AI-driven PCB design workflow, including library generation, schematic creation, connectivity, rendering, and DRC. FootprintAI Library Generator (dev.footprintai.net) is currently in private beta and focuses on generating and verifying symbols and footprints from datasheet drawings, with support for 50+ package types and exports to KiCad and Eagle. My experience includes working on MEMS mirror driver, SiPM readout circuit for a laser-based LiDAR system among others. Combined with my understanding of AI/ML and agent-based systems, this hands-on experience with both electronics and AI helped shape the development of FootprintAI. I bring this combination of hardware understanding and AI-driven automation to PCB library and schematic generation, with a strong focus on correctness, verification, and practical engineering workflows. I’m particularly interested in **real-world library and schematic projects where accuracy matters**. I use AI-assisted tooling to accelerate the work while reviewing and validating the generated results, and I’m happy to iterate based on your feedback. Clear communication and reliable delivery are important to me, so I’m available for regular discussion, review, and iteration throughout the project.

Are you looking for a Professional PCB designer, Embedded Programmer or Electronics related Projects Expert? Good News: Your wait is over. You are on the right page. Hi, I am Engr. Zahid Mehmood, wit... Read more

Are you looking for a Professional PCB designer, Embedded Programmer or Electronics related Projects Expert? Good News: Your wait is over. You are on the right page. Hi, I am Engr. Zahid Mehmood, with over 7+ years of experience as a PCB Design Engineer in the Electronics & Embedded industry. During my career, I had successfully completed 100+ projects and some of them are also listed in the Portfolio. I truly believe in 100% Clients satisfaction by providing Quality Work. What You Get? 1-Complete End-to-End Design Solutions: Comprehensive electronic circuit and PCB design, from concept to final files ready for manufacturing. 2-Industry-Standard PCB Designs: High-quality designs following IPC-2221 standards, ensuring reliability and manufacturability. 3-Customized Solutions: Tailored designs to meet your specific requirements, whether for prototyping or full-scale production. 4-Advanced Design Capabilities: Expertise in signal and power integrity, high-speed mixed signal designs, and embedded systems integration. 5-Deliverables Ready for Manufacturing: Includes schematic, PCB layout, Gerber files, BOM, and a detailed 3D PCB model for easy visualization. 6-Embedded Programming Services: Development of firmware and software for seamless operation of your electronic products. 7-Support for High-Tech Designs: Proficiency in RTL Verilog and advanced troubleshooting ensures robust performance and design optimization. 8-Production-Ready Assistance: Guidance on selecting suppliers, manufacturers, and assembly partners for smooth product realization. 9-Post-Delivery Support: Ongoing technical assistance, including debugging, modifications, and performance enhancements, even after project completion. Let’s get started on your project to turn your ideas into reality!