Hire the best freelance Electromagnetics expert designers for your company

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

Senior mechanical engineer with extensive SolidWorks design and modeling experience as well as multiphysics analysis - including shock and vibration, thermal, CFD, electromagnetic, and stress - using... Read more

Senior mechanical engineer with extensive SolidWorks design and modeling experience as well as multiphysics analysis - including shock and vibration, thermal, CFD, electromagnetic, and stress - using SolidWorks Simulation and Ansys. Experience working for startups, in government research labs, and in industry, or projects ranging from small fuel-cell powered gensets to two-stories tall fusion reactors using superconducting magnets. A graduate of MIT and Northeastern University.

I am a freelance simulation and design engineer specializing in electromagnetic field analysis, electromechanical system modeling, and computational fluid dynamics. With deep expertise in MATLAB, AN... Read more

I am a freelance simulation and design engineer specializing in electromagnetic field analysis, electromechanical system modeling, and computational fluid dynamics. With deep expertise in MATLAB, ANSYS, COMSOL Multiphysics, SolidWorks, and CST Studio Suite, I deliver high-accuracy simulation and design solutions for clients in energy, electronics, telecommunications, and mechanical industries. My core services include: - Electromagnetic field simulation of motors, generators, transformers, and other electromechanical components - Signal, data, and image processing workflows in MATLAB - Electromechanical and magnetoelectric material modeling and design - Static and dynamic structural analysis of electric, magnetic, and mechanical instruments - Antenna design and electromagnetic wave simulation across multiple antenna categories - Computational fluid dynamics (CFD) and aerodynamics simulation using ANSYS Fluent I bring a rigorous engineering mindset, fast turnaround, and clear communication to every project. Whether you need a quick feasibility study or a full simulation campaign, I can deliver reliable, well-documented results.

Unique knowledge and experience in marine and subsea engineering. Significant experience in sensor and Electromagnetics technology. Designed and commercialised tens of products to the market.

Unique knowledge and experience in marine and subsea engineering. Significant experience in sensor and Electromagnetics technology. Designed and commercialised tens of products to the market.

Results-driven electrical engineer with expertise in electromagnetics and electric machine design. Proficient in developing and optimizing Permanent Magnet Synchronous Motors (PMSM) and Brushless DC M... Read more

Results-driven electrical engineer with expertise in electromagnetics and electric machine design. Proficient in developing and optimizing Permanent Magnet Synchronous Motors (PMSM) and Brushless DC Motors (BLDC) for various industrial applications. Skilled in finite element analysis (FEA) and electromagnetic simulation with hands-on experience using Ansys Maxwell, Motor-CAD and COMSOL. Strong background in high-speed motor/generator design for energy storage application. Adept at prototyping and system-level optimization. Proven track record in cross-functional collaboration and driving innovation to enhance motor efficiency, reliability and performance. In addition to my engineering work, I am the creator of "Mind Your Motors", a LinkedIn newsletter dedicated to electric machine design. I launched this initiative to create a transparent, technical and accessible platform for sharing insights and engaging with the global engineering community. Through this platform, I aim to explore technical topics, share lessons learned from real-world projects and foster dialogue between professionals, students and researchers. I am passionate about advancing the state of electric motor technology through thoughtful engineering, sustainable design principles and open collaboration. Whether through project work, industry engagement or technical communication, my goal is to contribute meaningfully to the future of electrification. I am seeking opportunities to contribute to cutting-edge advancements in electric motor design. If you are working on electrification, electric machines or adjacent technologies and believe there’s an opportunity to collaborate, I welcome the connection.

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technic... Read more

My educational background is in Instrumentation,Applied Physics and mechanical engineering. I studied at: -University of Poitiers in France -Strathclyde University in the UK, -the prestigious Technical University of Munich in Germany, -QUT in Brisbane in Australia. I am a driven, creative and organised executive engineer. I have been a company director since 2011, and this shows up in the way I cut to the chase, build strategies and plans, track progress, report and interact with people. I only do high-quality research and modeling. My moto is: first time right. I delegate simpler work and do all the really challenging work and peer reviews myself. I have reached the stage in my career where projects in any industry are similar. If it flows, I can design it. For example, the set-up of the CFD with waves for the marine industry is identical to the set-up of an electromagnetic radiation model. The waves need to be dampened at the boundaries of the models so that the model is not riddled with non-physical reflected waves. Setting up a mesh (pixelisation of the geometry on which the equations are calculated) for a marine foil has exactly the quality criteria as a mesh of a heat exchanger. In all R&D projects, spending between a few days to a few weeks in the most complex cases, enables me to become an expert in the field. My favorite type of project is R&D. I love going deep, learning new things, planing and figuring out how something’s going to work and how to optimise it. I have used Computational Fluid Dynamics (CFD) professionally since 2006. After a thorough CFD software comparison, I selected Siemens STAR-CCM+ and I have used it exclusively ever since. Star-CCM+ is a high productivity CFD software, equivalent to ANSYS Fluent. For more information: resolvedanalytics.com/theflux/comparing-cfd-software-part-4-comprehensive-cfd-software-packages My first job (9 years) was in building physics, for a premium building services consultancy. I set up the CFD modelling capability from scratch, and I became the CFD expert in the Australian Standards 1668.2 committee. I performed CFD modelling for: ventilation (natural and mechanical), fire, active facades conjugate heat transfer, pollutant dispersion and wind. My performance-based designs saved carpark owners and contractors 100,000's of $. I spent most of 5 years researching active facades that store energy and redirect sunlight deep in the building. I modelled heat transfer, phase change and radiation in the CFD software. In 2015, my mother was diagnosed with cancer, and I moved back to France temporarily with my family to look after my parents. I decided to start a "portable" consulting and supercomputing business and called it trampoCFD. Trampo for trampoline: my secret weapon to keep a creative mind is an Olympic trampoline break multiple times a day. I applied my CFD knowledge to improve process performance in many different industries: pneumatic conveyors, mining classifier, injectors, factory, vertical farm and carpark HVAC, irrigation, ohmic heating, coffee machine, marine and wind power generation to name a few. My skills include: -dilution/dispersion, -mixing, -Multi-phase and phase change (Free surface flow, evaporation/condensation, melting/solidification) -Electromagnetics (Joule's effect, Ionic wind, electromagnet) -DEM (grain, sand) -Conjugate heat transfer -Automation -Optimization -Moving bodies -CAD: Solidworks and NX -FEA: Electromagnetic static or dynamic simulations In 2019, Siemens approved me as a software reseller, which means Siemens recognised my ability to provide technical support to CFD engineers on Star-CCM+. This enables me to continue helping my clients once they develop an in-house CFD capability. In 2020, I became the lead CFD engineer of a group of 4 engineers and 2 developers who take on the most complex CFD and multiphysics consulting projects . I hope the above summary gives you a clear idea of my capability. I would love to discuss your project. Please get in touch! Best Regards, Guillaume Jolly ▒▒▒▒▒▒▒▒▒ ▒▒▒▒▒: guillaume_jolly_pro ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ (iphone: ▒▒▒▒▒▒▒▒ & ▒▒▒▒▒▒▒▒, ▒▒▒▒▒▒▒▒)

I am currently working as design engineer in pump manufacturing industry. Working on solidworks, autocad and fusion360 for 3D modelling and drafting of pump and all its equipment. I have improved my d... Read more

I am currently working as design engineer in pump manufacturing industry. Working on solidworks, autocad and fusion360 for 3D modelling and drafting of pump and all its equipment. I have improved my designing skills by 3D modelling of intricate parts with help of vernier scale.

Hello, my name is Kimberley Robinson and have been drafting with AutoCAD for 20 years. I’ve drafted numerous sketches, plans, and maps, mostly in the legal land surveying industry. I was a project man... Read more

Hello, my name is Kimberley Robinson and have been drafting with AutoCAD for 20 years. I’ve drafted numerous sketches, plans, and maps, mostly in the legal land surveying industry. I was a project manager for Southern SK of As-Built Maps of almost 800 flowlines and shapefiles created. I ran this project and successfully kept on the assigned budget per area, for large Oil & Gas company. My communication skills are honed by my experience as a Drafting Supervisor while living in northern Alberta. Microsoft Office knowledge with Excel and Word to assist tasks. Specializing in AutoCAD 2D drafting, I do work with AutoCAD Civil 3D. I understand the importance of detail and have the discipline skill of the Alberta Land Surveys Act, Alberta Land Titles Office and Crown Lands strict procedures. As part of urban design, I was involved in various stages of drafting for engineering design, as well as all survey plans, of an 88 lot subdivision in AutoCAD Civil 3D. I’ve also worked on a massive plant construction project which had to be in imperial measurements. With my knowledge, I played the key role in template requirements for AutoCAD setup. When you hire me, here’s what we would do: 1. Click the message button to invite me to your job. 2. Once everything is accepted, we would talk. 3. We’ll go over all the details, how things need to be laid out, functionality, deliverables expected, etc. If that all sounds good, click the “message” button and let's get your project completed. I look forward to hear from you.

Hello! My name is Cam Ruffle-Deignan. I am a graduate in mechanical engineering who is ready to assist clients with their 3D modeling/design needs. Please look through my portfolio to get a fee... Read more

Hello! My name is Cam Ruffle-Deignan. I am a graduate in mechanical engineering who is ready to assist clients with their 3D modeling/design needs. Please look through my portfolio to get a feel for the work I have done in the past and what I can offer you in the future. I am willing to do individual part designs or small scale assemblies.

I have professional experience in architectural and structural metalwork, process plant equipment design and layout, and 3D routing for piping, hydraulics, and pneumatics. My main skill set includes... Read more

I have professional experience in architectural and structural metalwork, process plant equipment design and layout, and 3D routing for piping, hydraulics, and pneumatics. My main skill set includes CAD software (SolidWorks, Advance Steel, AutoCAD, etc.), fabrication and mechanical engineering, as well as project management. I have successfully contributed as both a designer and manager from concept through to commissioning on a variety of projects, including Three Waters infrastructure, rendering plants, and architectural/structural metalwork.

We provide following R&D engineering services and solutions: Product Development, Reverse Engineering, 3D Printing, Simulation Modeling, Marine Engineering, Electrical Engineering, Large-scale Softw... Read more

We provide following R&D engineering services and solutions: Product Development, Reverse Engineering, 3D Printing, Simulation Modeling, Marine Engineering, Electrical Engineering, Large-scale Software Engineering , Smart Contract Development, Decentralized App Development, DEX & Crosschain Bridge Development, Android App Development, iPhone App Development, Aerospace Engineering, Autonomous System Prototyping and Engineering.

I am a Mechanical Engineering graduate from Universitas Gadjah Mada with strong skills in 3D design and product visualization using Autodesk Inventor, SolidWorks, AutoCAD, and KeyShot. I have hands-on... Read more

I am a Mechanical Engineering graduate from Universitas Gadjah Mada with strong skills in 3D design and product visualization using Autodesk Inventor, SolidWorks, AutoCAD, and KeyShot. I have hands-on experience in mechanical fabrication, renewable energy systems, and project coordination. My background includes working on solar power projects and designing mechanical components with a focus on precision and functionality. I am passionate about creating efficient, reliable, and well-engineered solutions for real-world applications.

simple first see my portfolio if its suits for your requirements then we chat.. deepakmohata.artstation.com

simple first see my portfolio if its suits for your requirements then we chat.. deepakmohata.artstation.com

Hello! I'm Hifzan Raza, an Electronics and Communication Engineering (ECE) student with a strong passion for robotics, mechatronics, embedded systems, and mechanical design. I enjoy transforming innov... Read more

Hello! I'm Hifzan Raza, an Electronics and Communication Engineering (ECE) student with a strong passion for robotics, mechatronics, embedded systems, and mechanical design. I enjoy transforming innovative ideas into practical engineering solutions by combining electronics, programming, and CAD design.

I’m a furniture and product designer specializing in concept development, 3D modeling, and photorealistic visualization. My work focuses on creating original, functional, and production-oriented furn... Read more

I’m a furniture and product designer specializing in concept development, 3D modeling, and photorealistic visualization. My work focuses on creating original, functional, and production-oriented furniture and product concepts with a strong emphasis on proportion, materials, and visual identity. I can support projects from early design development through detailed 3D models, technical drawings, and presentation-ready renderings. My main tools are Rhino, 3ds Max, Corona Renderer, and Photoshop.

Mechanical Designer with experience in the development of industrial mechanical projects, specializing in 3D modeling, 2D technical detailing, and manufacturing documentation using SolidWorks. My exp... Read more

Mechanical Designer with experience in the development of industrial mechanical projects, specializing in 3D modeling, 2D technical detailing, and manufacturing documentation using SolidWorks. My expertise includes the design of industrial equipment, mechanical assemblies, welded structures, sheet metal components, tooling, and automation-related systems. I deliver complete engineering documentation, including manufacturing drawings, assembly drawings, Bill of Materials (BOM), exploded views, and technical specifications required for production and installation. I am committed to developing practical, cost-effective, and manufacturable solutions, ensuring compliance with engineering standards, production requirements, and project objectives. My focus is to transform concepts into reliable designs that can be efficiently manufactured, assembled, and implemented in industrial environments.

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

I'm a Mechanical Engineer student at University of Moratuwa Sri Lanka and I'm a dedicated design engineer. I can do any jobs within a small period and I practice several CAD softwares like Solidworks,... Read more

I'm a Mechanical Engineer student at University of Moratuwa Sri Lanka and I'm a dedicated design engineer. I can do any jobs within a small period and I practice several CAD softwares like Solidworks, AutoCAD, Simens NX, Ansys, Fusion 360 for several years.

Mechanical Design

Mechanical Design

I’m Yohan, an Architect and 3D Visualization Specialist with a deep passion for transforming design ideas into realistic visual experiences. I studied up to a Master’s in Architecture and have special... Read more

I’m Yohan, an Architect and 3D Visualization Specialist with a deep passion for transforming design ideas into realistic visual experiences. I studied up to a Master’s in Architecture and have specialized in architectural visualization, combining design sense with artistic precision. Over the years, I’ve worked on a wide range of residential, commercial, and hospitality projects, helping clients bring their concepts to life through clear, detailed, and visually engaging presentations. My approach blends creativity, spatial understanding, and storytelling — ensuring every design feels alive, functional, and emotionally connected to its space.

I am a mechanical engineering student.I want to design product and cars .So I started my freelancing career on CADCROWD.

I am a mechanical engineering student.I want to design product and cars .So I started my freelancing career on CADCROWD.

Hello, I am a specialist in drawings and 3D modeling in AutoCAD. ready to help you with your projects

Hello, I am a specialist in drawings and 3D modeling in AutoCAD. ready to help you with your projects

I am civil engineer having 3 years of experience as "Estimation Engineer". I can do material takeoff and cost estimation works for your building projects using tools like Plan swift and MS excel. Do c... Read more

I am civil engineer having 3 years of experience as "Estimation Engineer". I can do material takeoff and cost estimation works for your building projects using tools like Plan swift and MS excel. Do contact for the quality services.

CAD design using Solid Edge by Siemens Can provide solutions ranging from simple 3D models to complicated Assemblies

CAD design using Solid Edge by Siemens Can provide solutions ranging from simple 3D models to complicated Assemblies

I Am Jewelry Cad Drawing and Manufacturing in Lebanon. on Rhino program and Matrix. 15 years of experience.

I Am Jewelry Cad Drawing and Manufacturing in Lebanon. on Rhino program and Matrix. 15 years of experience.

I’m a Mechanical Engineering student with hands-on experience in SolidWorks, CAD modeling, and mechanical design. I specialize in creating 3D models, technical drawings, and manufacturing-ready files... Read more

I’m a Mechanical Engineering student with hands-on experience in SolidWorks, CAD modeling, and mechanical design. I specialize in creating 3D models, technical drawings, and manufacturing-ready files that are precise, functional, and optimized for real-world use.