Hire the best freelance Construction Engineering & Inspection expert designers for your company

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Mechanical Design Engineer, interested in product development and virtual simulation, SolidWorks and CATIA V5 professional, Using the 3DEXPERIENCE platform up to the latest version, worked with Shipbu... Read more

Mechanical Design Engineer, interested in product development and virtual simulation, SolidWorks and CATIA V5 professional, Using the 3DEXPERIENCE platform up to the latest version, worked with Shipbuilding Structures and Tubing, Experienced in 3D Scanning, Reverse Engineering and Technical Inspection. keep in touch if you have any common interests,

I'm a qualified construction engineer with the 14 years of experience. Have a Diploma of Master of Engineering: Shipbuilding. Worked in a Marine Design Bureau. My last finished project was 11982 "Lado... Read more

I'm a qualified construction engineer with the 14 years of experience. Have a Diploma of Master of Engineering: Shipbuilding. Worked in a Marine Design Bureau. My last finished project was 11982 "Ladoga" vessel. Proficient at drafting in AutoCAD, Rhinoceros, AVEVA. Also Maya, Substans and Photoshop

Experienced Technologist with a demonstrated history of working in the production engineering industry. Skilled in AutoCAD, Autodesk Inventor, ANSYS, SolidWorks, and Microsoft Office. Strong professio... Read more

Experienced Technologist with a demonstrated history of working in the production engineering industry. Skilled in AutoCAD, Autodesk Inventor, ANSYS, SolidWorks, and Microsoft Office. Strong professional graduated from Faculty of Mechanical and Civil Engineering.

Técnico Superior en Obras Civiles e Ingeniero en Construcción CIvil, con mas de 35 años de experiencia en todo lo referente a inspección de obras civiles, Control de Obras, planificación, Analista e I... Read more

Técnico Superior en Obras Civiles e Ingeniero en Construcción CIvil, con mas de 35 años de experiencia en todo lo referente a inspección de obras civiles, Control de Obras, planificación, Analista e Ingeniero de Costos (mas de 25 años de experiencia), en obras multidisciplinarias, edificaciones, vialidad, hidráulica, ferroviarias, urbanismo y petroleras. Mas de 40 cursos de formación en diferentes áreas, de las mas destacadas, Autocad, Microsoft Project, Excel basico y avanzado, control de obras civiles, entre otros.

With more than ten years in the manufacturing and technical fields I deliver quality cost effective product designs. I provide 3-D modeling, drafting and design engineering services to support your pr... Read more

With more than ten years in the manufacturing and technical fields I deliver quality cost effective product designs. I provide 3-D modeling, drafting and design engineering services to support your project. Project success is something that I strive for because the sense of accomplishment it brings. It drives me to deliver the most practical and cost effective solutions that customers need. With a vast experience in manufacturing methods I can ensure that a cost effective design solution will be developed. I have experience with manufacturing methods such as Machining, Plastic Injection Molding, 3-D printing (FDM, SLS, Polyjet, DMLS), Laser Marking, and Hydro-Forming. I can deliver sound and practical concepts tailored to a specific manufacturing method making it as inexpensive as possible.

I am a moderately experienced CAD Designer, Engineer, and Drafter. I have regularly practiced drafting for close to 5 years. I'm fluent in many software suites, including AutoCAD, Inventor, Revit, Sol... Read more

I am a moderately experienced CAD Designer, Engineer, and Drafter. I have regularly practiced drafting for close to 5 years. I'm fluent in many software suites, including AutoCAD, Inventor, Revit, Solidworks, Creo, and Solid Edge. I primarily work on manufacturing projects but have also worked on a variety of others, such as a pier set to go up in New York in the next 2 years, and an electric cart that I designed and lead a team of 4 to fabricate and race the cart as part of the 2018 National Electric Cart Association Race. As part of the CAD II program, I designed and drafted floor plans for a modular house that was to be built by the 2018-2019 Construction class. I currently work as an independant contractor doing both design work and drafting work, primarily support for clients including Bissel, Steelcase, and large military contractors in the past.

- Mechanical engineer with manufacturing background - SolidWorks, Creo, Simulation, Ansys, FEA - New product concept design - Fixture design for automation, manufacturing, testing or inspection -... Read more

- Mechanical engineer with manufacturing background - SolidWorks, Creo, Simulation, Ansys, FEA - New product concept design - Fixture design for automation, manufacturing, testing or inspection - Machined, sheet metal, or plastic parts - Medical, semi-conductor, aerospace and consumer products

I have been in the architectural and engineering project management business for over 35 years. My experience includes residential, commercial, educational, religious, retail, and aviation projects. I... Read more

I have been in the architectural and engineering project management business for over 35 years. My experience includes residential, commercial, educational, religious, retail, and aviation projects. I have an accomplished career in completing projects on time and within budget constraints.

we are a team of Architects, designers and Engineers. We deliver services of all forms of designing, Architecture, Reverse Engineering, Surveys, Manufacturing, Machining, Creative Business products, I... Read more

we are a team of Architects, designers and Engineers. We deliver services of all forms of designing, Architecture, Reverse Engineering, Surveys, Manufacturing, Machining, Creative Business products, Installations, Maintenance, Automation, Control, Instrumentation, Software Development, Commissioning and any Solution you Require. We Strive to Build It Smart, Innovative, Safe, Cheaper & Fast. If You can Think It... We Can Design, Make & Deliver It...

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling,... Read more

Juan Camilo Barrera has been involved in various aspects of civil and municipal engineering for over 20 years. His skills and expertise include utility coordination, hydrology and hydraulic modeling, storm water management planning, water supply systems and modeling, non-revenue water reduction strategies, subsurface utility engineering, municipal engineering, urban planning, transportation and project management. He has been involved as Civil Engineering Lead and Utility Design Lead on a number of projects, having extensive project cycle experience, from front-end studies to full EPCM / EPC mandates as well as P3 Design Build Projects, including planning, design, construction, and installation phases in complex, time-sensitive environments.

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventu... Read more

In 1976 I started as an intern with one of largest HVAC Contracting Companies in South Africa as a mechanical draughtsman. My dedication and enthusiasm soon enabled me to progress rapidly and eventually becoming a Senior Contracts Manager taking charge of large HVAC installations. My Job description: • Duct design and workshop drawing plantroom layout. • Liase with client / consultants and architect on mechanical building services co-ordination and planning. • Workshop, site co-ordination and supervision. • Air-conditioning chilled, hot water piping schematics and layout details. • Tendering and estimating of jobs • Attend site and co-ordination meeting • Procurement of equipment • Monthly invoicing of contracts • Chilled water pipe calculations using the carrier design program. • Writing and compiling air conditioning maintanace manuals. • Design and manufacture of custom built chilled water air handling units for southern air conditioning contracts After 25 years I moved to a HVAC Design Consultancy Company as a Senior Design Engineer. My Job description • Budget proposal reports • Preliminary design reports • Hvac design. • Liase and architect on mechanical building services coordination and planning. • Attend plannining, site and co-ordination meetings. • Financial control up to final account. • Supervision of contract construction to final completion. • Suppervision of the hvac commissioning

Senior Lead Piping/Senior Lead Checker/Instrumentation Design Drafter/CAD Administration with extensive multi-discipline design and drafting competence, information management technology administrator... Read more

Senior Lead Piping/Senior Lead Checker/Instrumentation Design Drafter/CAD Administration with extensive multi-discipline design and drafting competence, information management technology administrator, technical publication editor, adjunct community college instructor, and professional WEB graphics expert. Providing successful managerial, supervisory, lead, and job production performance. A team-oriented forward thinking mediator for progressive solutions with a proven ability to successfully analyze an organization's critical support requirements, recognizing deficiencies, potential opportunities, and develop leading-edge solutions for increasing reliability and improving productivity. A dynamic consummate student with expedient learning capabilities coursing the constant evolution in industry standards, production tools, and requirements needed to maintain highly effective final product presentations. Completed PMP. Advanced Energy PMP, and PLM certification designations. Worked with various project management tools throughout the years PRIMAVERA, SmartSheet, LOTUS NOTES, Merlin, SAP, SOAP, Share Point software. Trained and competent in many of the industry’s leading intelligence gathering software i.e. Total Station, FARO, Leica, Quantapoint, various point cloud software. CURRENT: TWIC, ISTC W/ BASIC, HASC W/ BASIC, PASSPORT, DRIVER’S LICENSE.

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic... Read more

I am a civil engineer that worked for Zutari (previously Aurecon) as a Water Engineer. I worked with the design and project management teams on various water projects where my role included, hydraulic designs, cost analysis, feasibility studies and Bim modelling. I have gained experience working with various software such as C3D, Revit and Infraworks. This has given me ample time to develop a strong work ethic necessary for work in the field. Previously I worked for AECOM ZA where I have had extensive site experience and built strong competencies in inspection, report writing and people’s management. I worked on the Temba water purification plant phase 6 (TWPP-6) and Mooi Mgeni transfer scheme phase 2 (MMTS-2). Working on various aspects of the TWPP-6 and MMTS-2 has given me a great appreciation and insight into the importance of Water and Environmental Engineering in the future of any developing country. As an Engineering inspector and water Engineer I have developed flexibility by being required to inspect multiple disciplines under construction supervision such as buildings and civils works on various water purification structures, pump stations, substations, pipe chambers precast yard and housing platforms. I have also done a good deal of pipe line inspection involving monitoring, clearing, excavation, laying of bedding material, pipe laying, backfilling, lining and coating pipes, mechanical installations, and commissioning. I was fortunate to gain valuable insight and exposure as student whilst working on the Spring Grove Dam under BKS Consulting. I worked in the laboratory for two weeks doing certain lab tests as well as the evaluation of the results. I assisted with the inspection of RCC as well as the reinforced concrete for the intake structure. I also monitored the design of the layer works for the roads and the design and construction of the earth embankment. The time spent with BKS Consulting allowed me the opportunity to monitor drawings and designs as well as practice on Auto CAD.

Dynamic individual with Bachelors in Mechanical Engineering, Skilled in Design, Drafting & Site Installation services for HVAC & MEP Construction Industry ➢ MEP-Design & Drafting in Construction Indus... Read more

Dynamic individual with Bachelors in Mechanical Engineering, Skilled in Design, Drafting & Site Installation services for HVAC & MEP Construction Industry ➢ MEP-Design & Drafting in Construction Industry. ➢ Can work on International (Gulf) Projects. ➢ Expertise in AutoCAD drafting & Shop Drawing for MEP Services. ➢ Ability to handle Site Erection/Inspection of MEP Services ➢ Expertise in all editions of windows & MS Office. ➢ Excellent knowledge on Mechanical Core subjects.

EXPERIENCE: 1.Developed and implemented solutions to maintain and improve client infrastructure at existing sites. 2.Integrated known material stress factors into construction planning to support safe... Read more

EXPERIENCE: 1.Developed and implemented solutions to maintain and improve client infrastructure at existing sites. 2.Integrated known material stress factors into construction planning to support safe and lasting buildings and infrastructure. 3.Managed construction contracts for capital projects to outline objectives, stakeholder responsibilities and modification procedures. Liaised with civil technicians to prepare and update maps, drawings and blueprints using manual and computer-assisted methods TECHNICAL SKILLS: 1.Estimation & Costing 2.CAD Drafting 3.Site Inspection 4.Building structure 5.Support structure analysis 6.2D and 3D renderings 7.Construction techniques 8.CAD software proficiency 9.Structure designs 10.Load Calculation

Natuurlijk! Hier is de vertaling en het lijstje in het Engels: 1. Experience in Machine Design - Expertise in conceptualizing and developing machinery to meet specific needs. - Proficiency in C... Read more

Natuurlijk! Hier is de vertaling en het lijstje in het Engels: 1. Experience in Machine Design - Expertise in conceptualizing and developing machinery to meet specific needs. - Proficiency in CAD software for creating detailed machine schematics and models. - Knowledge of mechanical systems and components for optimal performance and efficiency. 2. End-of-Arm Tooling (EOAT) - Skilled in designing and implementing end-of-arm tooling for robotic systems. - Understanding of various EOAT applications, such as gripping, welding, and inspection. - Familiarity with materials and technologies to ensure durability and functionality of EOAT. 3. Construction - Experience in overseeing the construction and assembly of mechanical systems and machines. - Competence in coordinating with multidisciplinary teams during the construction phase. - Ability to troubleshoot and resolve issues during machine assembly and testing.

I am dedicated and skilled Civil Engineer with extensive experience in project management, construction supervision, and property inspection. I have a robust technical foundation in civil engineering,... Read more

I am dedicated and skilled Civil Engineer with extensive experience in project management, construction supervision, and property inspection. I have a robust technical foundation in civil engineering, reinforced by hands-on experience in various roles within the construction and engineering sectors. My proficiency in Python, React.js, and JavaScript complements my engineering expertise, allowing me to integrate technology effectively in my projects.

Experienced mechanical engineer with over 28 years of professional work in mechanical design, 2D/3D drafting, production documentation, and welding technology. I specialize in technical drawing (Auto... Read more

Experienced mechanical engineer with over 28 years of professional work in mechanical design, 2D/3D drafting, production documentation, and welding technology. I specialize in technical drawing (AutoCAD 2D), 3D modeling (SolidWorks), preparation of Bills of Materials, workshop and site assembly documentation, as well as PIO (as-built) project documentation. I hold an International Welding Technologist (IWT) diploma with extensive field experience in welding coordination, inspection, and documentation (WPS/PQR). Reliable, detail-oriented, and committed to delivering high-quality engineering support for industry and construction.

Director & Senior Mechanical Designer at Dual2 Ltd Chelmsford, United Kingdom Mechanical or Industrial Engineering Previous - Aquila Nuclear Engineering Ltd, Onet Technologies UK Limited (Forme... Read more

Director & Senior Mechanical Designer at Dual2 Ltd Chelmsford, United Kingdom Mechanical or Industrial Engineering Previous - Aquila Nuclear Engineering Ltd, Onet Technologies UK Limited (Formerly Gravatom Engineering Systems Ltd) Education BTEC HNC Mech. Eng., BTEC ONC Mech. Eng., C&G Eng. Parts 1 & 2 & C.A.E at Highbury Technical College A competent, capable and versatile Senior Mechanical Designer/Draughtsman with extensive experience undertaking design and project engineering/ management on bespoke turnkey engineering projects for the Nuclear, Pharmaceutical and Industrial sectors. Experience Director & Senior Mechanical Designer Dual2 Ltd February 2012 – Present Bishops Stortford Mechanical Design and Draughting services for clients on short/long term contracts or fixed priced projects. Specialising in Tool Jigs and Fixtures, Pharmaceutical and Nuclear Medicine Industry. Special Purpose Machines. Sheet metal Design. Production & Manufacturing Drawings. 3D Visualisation & Renderings. Concept Design. Manufacturing Resource service. Senior Mechanical Design Consultant via Dual2 Ltd. Aquila Nuclear Engineering Ltd February 2012 – July 2012 (6 months) Twyford Winchester Consulting through Dual2 Ltd. design and detailing for a range of products in the Nuclear and Pharmaceutical industries.Using CAD design tools:- Solidworks 2012, Provide project engineering & management support. Senior Mechanical Designer Onet Technologies UK Limited (Formerly Gravatom Engineering Systems Ltd) December 2002 – March 2012 (9 years 4 months) Responsible for the design and detail of manufacturing drawings for a range of products in the Nuclear and Pharmaceutical industries.Using CAD design tools:- Solidworks 2009 & 2010, Pro-Engineer Wildfire 3 & Autocad LT 2008. Provide project engineering & management support on turnkey mechanical and electromechanical projects when required. Employment Achievment: Alpharadin® (radium-223 chloride) Production Facility for Algeta. Lead design role of the first Alpha-Pharmaceutical high production facility which provides a new treatment for patients with bone metastases associated with major cancers. Mechanical Designer BK Automation June 1999 – December 2002 (3 years 7 months) Main role to design and detail Special Purpose Machines and automated equipment for a wide range of industries.Using CAD design tool:- Autocad 2000. Other duties provided: - enquiry quotation; manufacture and machine build/assembly back up; installation and commissioning of machines. Mechanical Draughtsman Gravatom Engineering Systems Limited October 1997 – June 1999 (1 year 9 months) Detail drawings from designed schemes and layouts for the Nuclear and pharmaceutical Industry using Autocad LT. Provide various project engineering duties for contracts. Tooling & Jig Design Draughtsman Bradlaw Richards Ltd September 1989 – October 1997 (8 years 2 months) Initially employed to train as a Junior Tooling & Jig Draughtsman. Manual detailing of manufacturing drawings from design schemes. Main customers from the Aerospace Industries, such as GKN Westland Aerospace, British Aerospace & Marconi. Design and detail: - Machining Fixtures and Drill Jigs for aluminium castings and plastic mouldings; Assembly Fixtures for Aircraft assembly; Go and No Go gauges for inspection of machined items. In 1991 initiated the use of 2D CAD using Autocad LT, Micro Cadam and 3D Micro Cadam (Helix). Mechanical Apprenticeship Elite Engineering Ltd August 1984 – September 1989 (5 years 2 months) After completing first year off the job training while employed as Mechanical Apprentice, I continued at Elite Engineering as a Manual Centre Lathe Turner and CNC Lathe Setter and operator. Responsible for Sub-contract manufacture of Low and high quantity Items. Completed EITB Engineering Apprenticeship.A competent, capable and versatile Senior Mechanical Designer/Draughtsman with extensive experience undertaking design and project engineering/ management on bespoke turnkey engineering projects for the Nuclear, Pharmaceutical and Industrial sectors. Licenses & certifications Solidworks - CSWP Dassault Systemes May 2020 – Present

I am a Civil Engineer with strong expertise in AutoCAD, Revit, Microsoft Project and Enscape, as well as technical training in English and occupational health and safety. My professional journey has b... Read more

I am a Civil Engineer with strong expertise in AutoCAD, Revit, Microsoft Project and Enscape, as well as technical training in English and occupational health and safety. My professional journey has been enriched by experience in managing urban and construction licenses of various types, along with conducting geotechnical and pathological studies. I am a professional dedicated to excellence and precision in every project I undertake. My work experience includes a tenure as a contractor at the Municipal Girardot Hall, where I conducted reviews of files for urban and construction licenses, ensuring compliance with regulations and territorial planning guidelines. Additionally, I had the opportunity to conduct technical inspection visits and provide support to the Technical Planning Directorate. As an intern at A&C Civil Solutions S.A.S, I focused on performing geotechnical and pathological studies, ensuring material quality through testing, and creating detailed technical reports. During this phase, I also developed skills in structural analysis and design, enabling me to comprehensively understand construction challenges. My vision is to contribute to innovative and sustainable construction projects, where I can apply my knowledge and skills to achieve exceptional results. I am enthusiastic about connecting with industry professionals and exploring new job opportunities that allow me to continue growing in my career. If you believe that my experience and abilities align with your organization's needs, I would love to connect with you and explore potential collaborations.

Hello, I am Civil Engineering Technologist with seven (7) years of experience in the construction field as both an Inspector and Contract Administrator for Land Development, Municipal Infrastructur... Read more

Hello, I am Civil Engineering Technologist with seven (7) years of experience in the construction field as both an Inspector and Contract Administrator for Land Development, Municipal Infrastructure and Transportation projects and three (3) years of experience in the design of municipal infrastructure. Typical responsibilities include resident inspection and contract administration, coordination on multi-disciplinary infrastructure projects, hydrologic and hydraulic modelling, preparation of technical reports for design and construction, preparation of cost estimates, specifications, tender and contract documents as well as mentoring and supervising junior staff. • Proficient use of AutoCAD and AutoCAD Civil 3D for drafting & design of grading, water distribution systems, storm and sanitary sewer systems, quantities for earthworks volumes and roads. • Excellent use of Microsoft Office Suite programs such as Word, Excel, Access, Powerpoint, & Project. • Working Knowledge of various engineering software such as Visual OTTHYMO, HEC-RAS, H20Net, WaterCAD, Storm & Sanitary Analysis and InRoads. • Experienced in engineering & topographical survey utilizing GPS & Robotic Total Stations. • Thorough understanding of the Ontario Provincial Standards, Municipal Design Standards and Development Engineering Manuals, Tendering & Procurement Processes, Contract Administration & Inspection Tasks, Occupational Health & Safety Act for Construction Projects as well as other applicable codes, standards & legislation. • Excellent attention to detail, written & oral communication skills with proven analytical & negotiating skills. I'd like to thank you in advance for considering me and would welcome an opportunity to discuss more about your project, my skill set, and how I might contribute to your project's success. If you have any questions, feel free to contact me. Best Regards, Joshua Battiston, C.E.T., rcsi, LEED Green Assoc.

Providing Engineering Design Drafting, 3d Modeling & Staffing Service Solutions for the New Orleans/Baton Rouge Architecture Engineering & Construction community. Our experience includes extensive... Read more

Providing Engineering Design Drafting, 3d Modeling & Staffing Service Solutions for the New Orleans/Baton Rouge Architecture Engineering & Construction community. Our experience includes extensive engineering skills and experience acquired over nearly twenty years with four years of land surveying experience, and fifteen plus years of design drafting using AutoCad, Civil 3D, Revit, Raster Design, Cadworx Structural and Pro-Engineer, for Architectural, Civil, and Structural design drafting , detailing, & 3D Modeling. Our design experience ranges from Residential/Commercial Development, Structural Steel Detailing, Municipal and Industrial Infrastructure Capital improvements, including Downstream O&G facilities throughout the Southeast region, as well as Bulk Handling and Liquid Transfer Stations on the Lower Mississippi River, Marine Terminal and Wharf Design, and Marine Inspection & Rehabilitation projects worldwide. Additional design experience includes detailing P&ID drawings and electrical schematics; substation design , cable tray drawing and diagrams, Light Rail design and Bridge upgrades for Light Rail, Pulp & Paper Plant Design, Levee/Flood control design, Pump Stations, and a year of site inspection work.

I’m a Senior Mechanical Design Engineer with 12+ years of hands-on experience in product design, manufacturing processes, and reverse engineering — with a strong focus on petrochemical, oil & gas, and... Read more

I’m a Senior Mechanical Design Engineer with 12+ years of hands-on experience in product design, manufacturing processes, and reverse engineering — with a strong focus on petrochemical, oil & gas, and heavy industrial components. 🔧 Key Skills & Tools: • Advanced CAD modeling in SolidWorks, CATIA, Inventor • Precision 3D scanning using GOM & point cloud processing • Reverse engineering of turbines, pumps, impellers, and valves • Geometric Dimensioning & Tolerancing (GD&T) based on ASME Y14.5 • 2D drafting, technical drawings, and industrial tolerancing • Proficient in Geomagic Control X for quality inspection • Deep knowledge of machining, casting, and fabrication standards 🎯 I specialize in transforming complex physical parts into high-quality digital CAD models optimized for prototyping, production, or inspection. I ensure compliance with industry standards and deliver highly accurate, manufacturable designs. Let's bring your idea to life — efficiently, accurately, and professionally.