Hire the best freelance C Programing expert designers for your company

I’m an Electrical Engineer with a BS Electrical Engineering from NJIT and two years of RF and PCB design experience at General Motors. As a Wireless Hardware Engineer, I validate and improve cellular... Read more

I’m an Electrical Engineer with a BS Electrical Engineering from NJIT and two years of RF and PCB design experience at General Motors. As a Wireless Hardware Engineer, I validate and improve cellular transceiver modules, while also rebuilding and optimizing high‑frequency test benches. Previously, as a Design Release Engineer, I was responsible for the production of the headliner on one of GM's vehicles, mixing design validation work and issue resolution with international supply chain management. I’m skilled in MATLAB, 3D modeling, RF system analysis, PCB design for specialty applications, and collaboration across many departments. My strengths lie in RF design, system validation, and cross‑disciplinary collaboration to deliver robust, manufacturable hardware.

I am a Mechanical Engineer. I have good hands-on 3d modeling software like CATIA, SOLIDWORKS, CREO, AUTOCAD, ANSYS, ADAMS, MASTERCAM, MAYA, BLENDER, etc. I am good at designing automotive parts. I hav... Read more

I am a Mechanical Engineer. I have good hands-on 3d modeling software like CATIA, SOLIDWORKS, CREO, AUTOCAD, ANSYS, ADAMS, MASTERCAM, MAYA, BLENDER, etc. I am good at designing automotive parts. I have experience in designing two ATVs, one autonomous planting machines. I am a Dassault system certified SolidWorks associate in mechanical design, so you can trust my designing skills.

I'm a mechanical engineering student, studying at Deakin university, and CAD enthuisiast. I primarily use fusion 360 now but have experience in Solidworks. My prior experience is in sheet metal design... Read more

I'm a mechanical engineering student, studying at Deakin university, and CAD enthuisiast. I primarily use fusion 360 now but have experience in Solidworks. My prior experience is in sheet metal design and PDF to model conversion. While studying my associates of engineering, I received a high distinction grade My work now involves 3D modelling and cnc programming for a 3 axis router.

Hey there!, I am Tirumala and I am a Mechanical engineering student, Game Developer and Programmer. I do 3D-CAD CAE, 3D modelling for game assets(with Blender), GameDev (with Unity & Unreal) and progr... Read more

Hey there!, I am Tirumala and I am a Mechanical engineering student, Game Developer and Programmer. I do 3D-CAD CAE, 3D modelling for game assets(with Blender), GameDev (with Unity & Unreal) and programming. Till now I have helped a few private firms to design instruments, provided CAD and CAE services and worked on several personal projects.

I am a mechanical engineer. I am really enjoying and good at cad software like solidworks,catia,fusion 360. Also, i can prepare FEM and flow simulations with ansys, solidworks flow simulation, hyperme... Read more

I am a mechanical engineer. I am really enjoying and good at cad software like solidworks,catia,fusion 360. Also, i can prepare FEM and flow simulations with ansys, solidworks flow simulation, hypermesh.

Wahyu novianto, 23 years old, lives in the city of Tangerang and is a student at Pamulang University majoring in Informatics. I was born in Tangerang on November 2, 1996. In addition to having the... Read more

Wahyu novianto, 23 years old, lives in the city of Tangerang and is a student at Pamulang University majoring in Informatics. I was born in Tangerang on November 2, 1996. In addition to having the skills to make application programs, I am also proficient in designing 2D & 3D because I graduated from SMKN 4 Kota Tangerang majoring in mechanical drawing engineering, I am also a provincial job training skill in CAD / CAM and I have also participated in the ASEAN Skill Competition.

R&D engineer with multidisciplinary skillsets: - 3+ years of CAD design and engineering simulation. - 3+ years of electronic circuit design and PCB assembly. - 3+ years of hardware assembly via 3D... Read more

R&D engineer with multidisciplinary skillsets: - 3+ years of CAD design and engineering simulation. - 3+ years of electronic circuit design and PCB assembly. - 3+ years of hardware assembly via 3D printing techniques. - 3+ years of firmware and microcontroller programming. - 3+ years of scientific research in the field of Bioengineering.

saya merupakan mahasiswa program study teknik mesin di salah satu kampus unggul yang ada di provinsi Riau indonesia. saya memiliki keahlian dibidang desain CAD dan CAM, manufacturing, dan ilmu bahan.... Read more

saya merupakan mahasiswa program study teknik mesin di salah satu kampus unggul yang ada di provinsi Riau indonesia. saya memiliki keahlian dibidang desain CAD dan CAM, manufacturing, dan ilmu bahan. saya juga pernah mengikuti olimpiade Aakruti Global 2025 yang diselenggarakan oleh 3D Experiens

PCB layout, Circuit Design, PDN/SI validation in simulation Altium, Allegro, Orcad, SiWave, HyperLynx From embedded SoC to 25GSerdes ARM, Marvell,Cavium,Broadcom,ADI,NXP, TI Mixed Signal, DCDC discret... Read more

PCB layout, Circuit Design, PDN/SI validation in simulation Altium, Allegro, Orcad, SiWave, HyperLynx From embedded SoC to 25GSerdes ARM, Marvell,Cavium,Broadcom,ADI,NXP, TI Mixed Signal, DCDC discrete

I'm a student at SAIT with background in design, drafting, programming and rapid prototyping. - Experienced with SolidWorks, Inventor, Fusion 360 and AutoCAD - Programmed with C/C++, Java, JavaScript,... Read more

I'm a student at SAIT with background in design, drafting, programming and rapid prototyping. - Experienced with SolidWorks, Inventor, Fusion 360 and AutoCAD - Programmed with C/C++, Java, JavaScript, etc.

From a raw idea to a polished product design. I'll do my best to help customer get what he need and exceede initial expectations.

From a raw idea to a polished product design. I'll do my best to help customer get what he need and exceede initial expectations.

I'm a graduate Mechanical Engineer with over 6 years of experience in solid-state design and FEM analysis using SolidWorks, AutoCAD, CATIA, Abaqus, COMSOL and ANSYS softwares. Along with my CAD and CA... Read more

I'm a graduate Mechanical Engineer with over 6 years of experience in solid-state design and FEM analysis using SolidWorks, AutoCAD, CATIA, Abaqus, COMSOL and ANSYS softwares. Along with my CAD and CAE experience, I have worked with various machining and welding tools such as CNCs, mills, lathes, 3D printers, arc welders, angle grinders, bench grinders, chop saws, etc. Therefor, I’m familiar with how things work in the real world and can design accordingly.

Masters thesis on the certification of metal aerospace parts manufactured via additive manufacturing processes (LPBF). Honours thesis on developing an RFID IoT device to monitor operator efficiencies... Read more

Masters thesis on the certification of metal aerospace parts manufactured via additive manufacturing processes (LPBF). Honours thesis on developing an RFID IoT device to monitor operator efficiencies in a Job Shop environment.

I am an Electronics Engineer specializing in Embedded Systems, PCB Design, Firmware Development, FPGA Design, and MATLAB/Simulink. I help startups, companies, and researchers transform ideas into reli... Read more

I am an Electronics Engineer specializing in Embedded Systems, PCB Design, Firmware Development, FPGA Design, and MATLAB/Simulink. I help startups, companies, and researchers transform ideas into reliable electronic products from concept to production. My expertise includes schematic design, multilayer PCB layout, embedded firmware development, circuit simulation, IoT systems, sensor interfacing, and prototype development. I work with ESP32, STM32, Arduino, AVR, FPGA (Verilog/VHDL), MATLAB, KiCad, Altium Designer, EasyEDA, Proteus, and Multisim. I can assist with: • PCB Design & Layout • Schematic Design • Embedded C Programming • ESP32 & STM32 Firmware • FPGA Development • MATLAB & Simulink • Circuit Simulation • IoT Product Development • Hardware Debugging • Prototype Development I focus on delivering production-ready designs with clear communication, attention to detail, and reliable technical support throughout every project.

WE SUPPORT COMPANIES OPERATING IN THE FIELD OF VEHICLES, INDUSTRIAL MACHINES AND THEIR COMPONENTS. WHO WE AREA We are a company dedicated to services in the area of mechanical engineering, working w... Read more

WE SUPPORT COMPANIES OPERATING IN THE FIELD OF VEHICLES, INDUSTRIAL MACHINES AND THEIR COMPONENTS. WHO WE AREA We are a company dedicated to services in the area of mechanical engineering, working with industrial machinery design, product development and structural analysis. We have over 15 years of experience in product design and technical knowledge acquired in industry and academia over the years. HOW WE WORK We help with the transformation of an existing product or the creation of a new one. Research for innovation, combined with the goal of keeping costs down, enables the creation of a more competitive product. - We work in partnership with your engineering in machinery and equipment design; - We help you develop your product with confidentiality; - We support your company in the conceptual phase of product development; - We do structural analysis using numerical analysis; - We design and calculate hydraulic components. Numerical analysis services are performed using commercial tools based on the Finite Element Method (FEM), Open source tools and internally developed codes. Analyses we can do: - Static - linear and non-linear - Modal analysis, frequency response and PSD - Flambagem - Fatigue Crane analysis: - Structural analysis of cranes (Forest cranes, Knuckleboom crane and aerial device) following requirements of EN 13001 (part 1, 2 and 3); - Structural analysis of lifting devices following current standards; - Structural analysis of construction cranes.

I’m an Aerospace Technocrat, currently pursuing my Master’s degree in Aerospace Technology in MIT Anna University Chennai, Tamil Nadu, India with a CGPA of 7.6/10. Currently doing my final year projec... Read more

I’m an Aerospace Technocrat, currently pursuing my Master’s degree in Aerospace Technology in MIT Anna University Chennai, Tamil Nadu, India with a CGPA of 7.6/10. Currently doing my final year project in “ Numerical analysis on the effect of V Tab and Multiple Delta Tab in subsonic Mach Number”. Will be graduating in Master Degree by end of July 2020. I graduated with a bachelor’s degree in Aerospace Engineering from SASTRA Deemed To Be University, Thanjavur, Tamil Nadu, India with a CGPA of 7/10 on May 2018. I have actively participated in the flight designing competition SAE Aero India Southern Division Design Competition 2017 & 2019 and DRDO Robotics competition - DRUSE 2018. I am the lead originator, content essayist and the group pioneer for the previously mentioned rivalry. My zone of premium is aerodynamics, designing, propulsion and structures. I have learned and have experience in software like Fusion 360 and Pro-E and familiar with Ansys Workbench Gambit & Fluent CATIA and Auto CAD. I am knowledgeable about MS Office. Exhibited notice/poster in Zonal Level DRDO DRUSE Rivalry 2018 on " Air Ambulance Vehicle Automaton for Casualty Evacuation. Published a research paper in a journal entitled " AIR AMBULANCE DRONE - A MODERN CONCEPTUAL AERIAL VEHICLE FOR SURVEILLANCE AND CASUALTY EVACUATION " in INTERNATIONAL JOURNAL OF MECHANICAL AND PRODUCTION ENGINEERING RESEARCH AND DEVELOPMENT (IJMPERD); ISSN (ONLINE): 2249-8001; ISSN (PRINT): 2249-6890; VOL - 9, ISSUE - 4; EDITION: AUG-2019 ". I am fluent in English. I have also learnt languages like French, German, Hindi. Member of a design team have drawn a design for many research works. I am a dynamic individual in the online networking stage like Linked-In and Facebook.

Dedicated mechatronic engineer with more than 3 years experience in design thinking, project management, design, development and quality assurance. Expert in artificial intelligence, and skilled produ... Read more

Dedicated mechatronic engineer with more than 3 years experience in design thinking, project management, design, development and quality assurance. Expert in artificial intelligence, and skilled producer of solutions associated with internet of things systems and embedded systems. Recognized for a keen ability to improve design components, increase product and manufacturing efficiency. I hold a Master of science in Mechatronic Engineering and I am fluent in English and French.

I work as an R&D Engineer in Hyundai Mobis since 2.5 years in CAE dept. I have skilled industrial experience and sound Engineering background which I can put use to deliver qualitative work within the... Read more

I work as an R&D Engineer in Hyundai Mobis since 2.5 years in CAE dept. I have skilled industrial experience and sound Engineering background which I can put use to deliver qualitative work within the agreed timeframe. I strive to work flexibly with my partners and center my focus upto the client's satisfaction. My expertise is CAD, CAE and Product design which I got skilled during my Engineering and Industrial experience. My other supplementary skills are C, tcl/tk, MS Office.

Pursuing b.tech 3rd year in mechanical engineering. Good knowledge of design software proficient in catia. Content writing,verbal and written communication skills

Pursuing b.tech 3rd year in mechanical engineering. Good knowledge of design software proficient in catia. Content writing,verbal and written communication skills

I am an Electronics Systems Engineering student at IIT Madras with hands-on experience in PCB design, electronic circuit design, embedded C programming and signal processing. I have designed a multi-... Read more

I am an Electronics Systems Engineering student at IIT Madras with hands-on experience in PCB design, electronic circuit design, embedded C programming and signal processing. I have designed a multi-parameter wearable health-monitoring PCB for VitalYug, a medtech startup, working on component selection, schematic design, PCB layout, routing, and design rule checks (DRC). I have experience with Altium Designer and KiCad, along with circuit simulation and analysis using LTspice. My areas of interest include PCB designing, embedded systems, Embedded C, RF impedance matching and signal processing. I value reliable designs, attention to detail, and practical engineering solutions. I am eager to collaborate on electronics projects and help clients turn their ideas into functional hardware.

• I am Mechanical Engineer graduated from Mumbai University and working in Oman as Mechanical design engineer 3 Years’ Experience in designing Machine tools, Steel structure, Steel Cable Drums. • S... Read more

• I am Mechanical Engineer graduated from Mumbai University and working in Oman as Mechanical design engineer 3 Years’ Experience in designing Machine tools, Steel structure, Steel Cable Drums. • Software Known: AUTO-CAD, AUTODESK INVENTOR, MOST 2D (CNC PROGRAMMING), G-Code Nesting etc. • Operating System: Microsoft Windows, Power Point, Excel Etc. • Practical Experience of Operating CNC Lathe Machine, Plasma ARC CNC Machine, Milling Machine, Arc Welding, MIG Welding etc. • Ability to read Piping & Instrument Diagram, Hookup Drawings, Mechanical Drawings. • Ability to manage inventory of the plant, Purchasing and managing material, worked as purchaser. • Installation, Troubleshooting and Calibration of Field Machineries like CNC Lathe Machine, Milling Machine, PLASMA ARC CNC Machine, Vertical Drilling Machine, Hydraulic Shearing Machine, Hydraulic Heavy Press (25MT-30 MT), Hoist Crane (3MT-10MT).

My name is md imam hossain. I offer 2D/3D Drawing services for every type of industry. I do all kind of 2D drawings, 3D modeling and rendering in AutoCAD, Revit, SolidWorks . I will put all the time a... Read more

My name is md imam hossain. I offer 2D/3D Drawing services for every type of industry. I do all kind of 2D drawings, 3D modeling and rendering in AutoCAD, Revit, SolidWorks . I will put all the time and skills in making your project and fulfilling your needs. I am ready to help you and together to realize your ideas.

Embedded systems architect with extensive experience designing, developing, and mass-producing mission-critical electronic products for the energy, utilities, security, and oil & gas sectors. I've su... Read more

Embedded systems architect with extensive experience designing, developing, and mass-producing mission-critical electronic products for the energy, utilities, security, and oil & gas sectors. I've successfully delivered 8+ commercial hardware products currently deployed at scale across hundreds of field units. My work spans the full product lifecycle — from concept and R&D, through circuit design and PCB layout, to firmware development and mass manufacturing. Core expertise: - Microcontrollers: ESP32, STM32, ARM Cortex, Arduino - PCB Design: from schematic to production-ready Gerbers - Firmware: C/C++, FreeRTOS, OTA remote updates, MQTT, device drivers - Communication: LoRa, BLE, Wi-Fi, Cellular (2G/3G/4G), Satellite, VHF, RS485 - Sensors: Ultrasonic, seismic, acoustic, optical, temperature, pressure, current/voltage - IoT & Cloud: AWS IoT, MQTT, web dashboards - Power: Solar, ultra-low power design, battery management, energy harvesting All my firmware deliverables include a built-in OTA (Over-The-Air) update system with a web-based MQTT management interface — fully developed and field-tested across hundreds of devices. Highlights: - 3 technology patents (gas metering, ultrasonic measurement, optical coding) - Petrobras Inventor of the Year award - National Innovation Award (CNI - Brazil) - International publication (Society of Petroleum Engineers) - Postgraduate specialization in Artificial Intelligence I deliver production-ready solutions — not just prototypes.

Founded in 2013 Integra Sources has already completed more than 100 projects making happy more than 40 clients. Our customers have raised more than $1 000,000 on Kickstarter in total. We offer full... Read more

Founded in 2013 Integra Sources has already completed more than 100 projects making happy more than 40 clients. Our customers have raised more than $1 000,000 on Kickstarter in total. We offer full-cycle hardware and software development services delivering the best engineering solutions for you. ⭐Our core services ✔ Embedded Hardware Development (PCB design * FPGA design * Preparing for manufacturing * Certification * Prototyping) ✔ Embedded Software Development (Firmware development * Board support package development * Prototyping with SBC * RTOS) ✔ IoT Solutions (AWS IoT * Azure IoT * Industrial IoT * Industry 4.0 * M2M * Predictive maintenance * Digital transformation) ✔ Kernel and Driver Development (Windows * Linux * macOS * Android) ✔ Custom Software Development (Cross-platform software development * Native desktop software * System software) What else we can do ✔ Computer Vision Development (Image and video processing * Face recognition * Edge computing * Object tracking) ✔ Machine Learning and Artificial Intelligence (Recommender systems * AI-based applications * Neural networks * Data analytics * OCR) ✔ Robotics (Flying drones * Robots on wheels * Autonomous movement * Applications for Robot Operating Systems (ROS) ✔ Mobile Application Development (iOS application development * Android application development * Mobile apps for IoT * Cross-platform app development * Testing * App store submission) We create products for a number of industries including healthcare, logistics, asset tracking, education, industrial automation, consumer electronics, entertainment, and other fields. Innovative problem-solving skills, in-depth expertise and enthusiasm toward work make us a strong partner in the development services we provide. We are happy to work on your projects solving challenging tasks and getting excellent results📈

I am a final year mechanical engineering student from BITS Pilani with 3 years of experience in CAD modelling. I have been working as part of the SAE Supra team of my university where I have been desi... Read more

I am a final year mechanical engineering student from BITS Pilani with 3 years of experience in CAD modelling. I have been working as part of the SAE Supra team of my university where I have been designing suspension parts for formula student vehicles. I have also been a second runner-up in the CADemics competition a 72-hours competition where we had to design a multi-utility chair. More than 79 teams all over India participated and I secured the third position.

Electronic Engineer with strong experiences with Schematics, PCB, FPGA and Firmware. 1. Schematics and PCB Tool : Altium Designer(9, 14, 16, 17, 19, 20) Main Work : Making SCH&PCB Lib, Design Schemati... Read more

Electronic Engineer with strong experiences with Schematics, PCB, FPGA and Firmware. 1. Schematics and PCB Tool : Altium Designer(9, 14, 16, 17, 19, 20) Main Work : Making SCH&PCB Lib, Design Schematics and ERC check, PCB Layout and Routing, DRC check, BOM, Generating Fabrication. Routing Skills : DDR3, HDMI, MDI, GMII/RGMII YCbCr, RGB, USB2.0/3.0, MIPI DSI, CSI, LVDS, etc. 2. FPGA Tool : Vivado, Xilinx ISE, Quartus and ModelSim Main Languages : Verilog and SystemVerilog Developed Cores : UDP, I2C, SPI, UART, AXI interface cores, MIG, LDPC, BCH, OFDM 3. Firmware Tool : Ubuntu, Raspbian, Arduino IDE, Keil, SystemWorkBench, STMCubeMx, Xilinx SDK, IAR, MPLABX, nRF SDK, Segger Studio, MCUXpresso and so on. Main Works : Embedded Product, IoT Product, Automatic Control Product and so on.

- expert for solidwork and autocad - possess c ++ knowledge - degree in engineering - high school informatics

- expert for solidwork and autocad - possess c ++ knowledge - degree in engineering - high school informatics