Hire the best freelance Beam Design expert designers for your company

I am a Mechanical Engineer with a degree from Iowa State University. I have over 20 years of experience engineering, designing, modeling, and drafting in the pharmaceutical machinery industry. I have... Read more

I am a Mechanical Engineer with a degree from Iowa State University. I have over 20 years of experience engineering, designing, modeling, and drafting in the pharmaceutical machinery industry. I have the abilities to make complex shapes, but understand that sometimes simplified models are the better choice.

I am a Graduate in Mechanical engineering with 11 years of experience in Design field.

I am a Graduate in Mechanical engineering with 11 years of experience in Design field.

I have over 5 years experience in Civil and structural Design. Using AutoCAD Civil 3D involve etabs , safe and robot structural program. I have prepared structural engineering master. I have helped d... Read more

I have over 5 years experience in Civil and structural Design. Using AutoCAD Civil 3D involve etabs , safe and robot structural program. I have prepared structural engineering master. I have helped design both large and small civil projects. Project types include site grading, house pad placement, and foundation, driveway design, survey quantities work integration, design water tank.

- Certified SOLIDWORKS 2020 Associate, MATLAB, AUTOCAD, and Microsoft Office proficient. - Undergraduate Mechanical Engineer at the University of Florida and 3D Modeling Consultation

- Certified SOLIDWORKS 2020 Associate, MATLAB, AUTOCAD, and Microsoft Office proficient. - Undergraduate Mechanical Engineer at the University of Florida and 3D Modeling Consultation

I am a dynamic and self-driven engineering professional with sound knowledge of mechanical engineering. I have a strong interest in research, design, and development in engineering. I had done work in... Read more

I am a dynamic and self-driven engineering professional with sound knowledge of mechanical engineering. I have a strong interest in research, design, and development in engineering. I had done work in composite beam Design application development. I had also worked on the design and development of an A.T.V for the Baja competition and have gained strong technical and nontechnical skills. My aim in life is to be a skilled mechanical engineer and want to contribute to the Nation-building via engineering. Apart from engineering, I am fond of spirituality, reading, and trekking.

Structural Design & Detailing Technician | Reinforced Concrete | AutoCAD I am an experienced Structural Design & Detailing Technician specialising in reinforced concrete design, structural detailing... Read more

Structural Design & Detailing Technician | Reinforced Concrete | AutoCAD I am an experienced Structural Design & Detailing Technician specialising in reinforced concrete design, structural detailing and AutoCAD drafting. I can assist with structural projects from **load assessment and preliminary design through to reinforcement detailing and production of clear, construction-ready drawings**. My Structural Experience My work includes: * Reinforced concrete beam design * Reinforced concrete slab design * Cantilever slab design * Flexural and shear checks * Reinforcement selection and detailing * Anchorage and development length assessment * Structural load calculations * Reinforcement layouts and schedules * Structural steel detailing * Structural connection detailing * Foundation and supporting-element design * Interpretation and development of structural drawings * AutoCAD structural drafting and detailing I am comfortable working with **Eurocode, British Standards and SANS-based structural design approaches**, and can work with different reinforcement grades and design requirements. Design + Detailing My strength is combining **structural engineering understanding with practical CAD detailing**. I don't simply produce drawings from information supplied by others. Where required, I can work through the structural problem, establish the design requirements, perform the necessary checks and then translate the result into a practical reinforcement/detailing solution. I pay particular attention to: **Load paths • Structural behaviour • Reinforcement arrangement • Anchorage • Shear • Flexure • Constructability • Clear drawings** Technology & Efficiency I have also developed my own structural design application to assist with preliminary structural calculations and design workflows within an AutoCAD-based environment. This allows me to streamline repetitive design processes while retaining engineering judgement and independent checking. The result is **faster turnaround without treating structural design as a "push-button" exercise**. What I Can Help You With Whether you already have a structural design that needs detailing, or you need assistance developing the design itself, I can provide support with: **Structural Design** * RC beams * RC slabs * Cantilevers * Supporting elements * Preliminary member sizing * Load calculations * Design checks **Structural Detailing** * Reinforcement layouts * Bar arrangement * Anchorage/detailing * Sections and elevations * Reinforcement schedules * Structural steel details * Construction details **CAD** * AutoCAD drafting * Structural drawing production * Drawing revisions * Redrafting and cleanup * Converting engineering information into clear construction drawings Why Work With Me? I approach structural drafting from a **design and constructability perspective**, rather than simply producing lines in CAD. My objective is to deliver drawings and calculations that are: **Accurate • Practical • Clearly presented • Efficient • Suitable for construction documentation** I am available for both individual projects and longer-term freelance structural design/detailing work. **Current freelance rate: $58/hour.** If you have a structural drawing, calculation, reinforcement detail or design problem that needs attention, feel free to contact me and we can discuss the requirements.

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and... Read more

Thirty plus years of tooling experience in the aerospace industry including Northrop Grumman, Sikorsky Aircraft and GNN Aerostructures. After retiring I soon realized that I missed the challenge and intellectual stimulation of the the work that I enjoyed for my entire career. So, I formed an LLC and purchased licenses for CATIA and Solidworks and have been performing contract tool design projects for former employers and new customers alike for several years. The types of tools I have designed include: o Composite airframe components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs) o Jigs and fixtures: major and sub-assembly tools, drill jigs, installation fixtures o Tooling for Composite air-frame components (Molds, preform tools, trim fixtures, resin transfer molds, bonding jigs, etc.) o Weld fixtures, electron beam welding tools o Ground support equipment o Machining holding fixtures o Conceptual tool designs for manufacturing planning o Inspection tools o Test fixtures

Landscape architect turned post & beam and timber frame designer

Landscape architect turned post & beam and timber frame designer

Our Service: Balaji Enterprises deals in 3D scanning of objects / components required for accurate CAM programming, reverse engineering and other industrial applications. The 3D scan data may be mod... Read more

Our Service: Balaji Enterprises deals in 3D scanning of objects / components required for accurate CAM programming, reverse engineering and other industrial applications. The 3D scan data may be modified and scaled to accommodate a wide range for design manufacturing requirements. We also provide services in Auto CAD 2012, Catia (drafting, assembling and part modelling), Pro-E, Solid Works, Unigraphics and Inventor. Functional areas:  Shop-floor layout making / modification  Manufacturing drawings  Die making  Automobile components modeling (Crank, Front Axle Beam, Camshaft, Crankshaft)

Studied drafting and construction management at Adirondack community college. Worked as a licensed home inspector in the state of New York. Most recently been doing timber frame design and constructio... Read more

Studied drafting and construction management at Adirondack community college. Worked as a licensed home inspector in the state of New York. Most recently been doing timber frame design and construction.

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Ma... Read more

• Experience in Handling Mechanical Design & Manufacturing Plant. • New Product Development & Engineering working on Autocad & Solidworks. • Hand on Experience in GD&T ASME Y14.5 • Experience in Material Selection & Load Calculation on Structural Beam. • Mechanical Engineer working on Basic (conceptual) and detailed engineering designs for sectors like power plant, process plant and waste water treatment plant. • Mechanical Design Engineer who have worked on different projects & handled a challenging technical development position on Precision Sheet Metal Enclosure Designing using Solid Works and AutoCAD.

- Mechanical design engineer having 8 yrs of experience in automotive industries. - Product design experience: Power train design & conventional axles, e beam, evd. - Specialist in making casting casi... Read more

- Mechanical design engineer having 8 yrs of experience in automotive industries. - Product design experience: Power train design & conventional axles, e beam, evd. - Specialist in making casting casings Die casting & sand casting - 3D cad tool experience in Creo, NX, Solid works - Surface modelling, sheet metal design, casting design

MY SELF TARUN KUMAR DUTTA Expert Mechanical Engineer , Energy , Power, Structure, Modeling /Drafting ,Designing For EPC , HVAC and MEP projects. I have more than 15 years experience in industria... Read more

MY SELF TARUN KUMAR DUTTA Expert Mechanical Engineer , Energy , Power, Structure, Modeling /Drafting ,Designing For EPC , HVAC and MEP projects. I have more than 15 years experience in industrial , production and academic projects as a mechanical engineer. My specialty in project and Production based work that is 1. Industrial Pollution Control System Fog Dust suppression system, Plain water Dust suppression system , Dust Extraction system , which include Estimation and coasting of the projects and selection of centrifugal pump selection , pipeline selection , and all pipe routine fittings etc .and related layout and schematic drawing. 2. HVAC system & MEP design Supply air and exhaust air ventilation system , Centrifugal Fan design , air washer unit design , Air conditioning System design ie. Central air conditioning system , duct able split ac , chiller ac , heat load calculation , BOQ and Equipment selection etc. 3. Gas Storage Tank and Gas Pipeline Design Executed the Project Work based on Gas Handling & Storage (Multi Cylinder installation, Pipeline Installation, LPG Tank (Bulk) Installation, Designing Kitchen Layout, supplying complete range of Kitchen Equipment's, LPG Reticulated System ,Pipe Gas to the kitchen) 4. Hot and cold Insulation of pipe and Equipment Cold & Hot Insulation of Pipe line & equipments. Measurement Insulated Pipe line and Equipment 5. Structure Design and spreader Beam EPM Plate Handling system, Circular Magnetic lifter , Rectangular Billet lifter, Rebar and Permanent Magnetic Chuck. Designing of EPM Plate handling System and Design & Drawing of Structure of Electro Permanent Magnet, Permanent Magnet, Circular Lifter, and Magnetic Chuck, design of Spreader beam. I have designed most of the structure Like spreader beam , cable reeling drum , chain and sprocket, hanging lifting lugs , shaft, coupling connection (nut bolt, weld, pin etc) 6. Layout and Design of Commercial Kitchen Equipments Designing Commercial Kitchen, Creating Kitchen Equipment layout plan by Auto-Cad 2007, 2010. Isometric Drawing of kitchen ,Bakery, Refrigeration, Bar Equipments. Isometric drawing of kitchen equipment and home furniture . I also used Auto Cad 2007,2009, 2013 mechanical , inventor , solid works 2D, 3D etc . I did prepare the report regarding Design/Drawing / Calculation / Constriction/ Manufacturing . Work for long time period , I easily considered the time and budge of the client to fulfill the right designed object.

Experience on design automated assembly machines including rotary indexing table, robotic system, vision inspection systems, walking beam, feeding and handling systems. From simple standalone module t... Read more

Experience on design automated assembly machines including rotary indexing table, robotic system, vision inspection systems, walking beam, feeding and handling systems. From simple standalone module to fully automated assembly line, we have the knowledge and experience to improve efficiency and productivity. Range of industries including automotive safety product, pharmaceutical, medical rubber Service include : 3D CAD model preparation from hand sketches, Automation/Module/Part design,3d modeling, Generate 2d detailing / assembly drawing, Convert 2d drawing to 3d model, (2D to 3D CAD conversion) Generate Pneumatic diagram.

I am a Civil Engineering diploma student with strong skills in Structural Engineering, AutoCAD drafting, and ETABS analysis. I specialize in creating accurate architectural and structural drawings, in... Read more

I am a Civil Engineering diploma student with strong skills in Structural Engineering, AutoCAD drafting, and ETABS analysis. I specialize in creating accurate architectural and structural drawings, including floor plans, beam-column layouts, slab design, footing details, and staircase drawings. I also have experience in structural analysis and design using ETABS according to BNBC and ACI codes. My goal is to provide accurate, reliable, and professional engineering solutions for international clients. I am committed to delivering high-quality work on time with full attention to detail

I like to see a job through from start to finish. I've designed systems of all shapes and sizes in Massachusetts. To list a few: Boiler plants, Chiller plants, Geothermal Heat Recovery Chillers, Geoth... Read more

I like to see a job through from start to finish. I've designed systems of all shapes and sizes in Massachusetts. To list a few: Boiler plants, Chiller plants, Geothermal Heat Recovery Chillers, Geothermal Condensers, Rooftop & Air Handling Units, Active Chilled Beam systems, Overhead VAV, Displacement Dehumidification VAV, VRF systems. Work from me will include load calculations, selection files, and revit models with fully calculating ductwork and piping systems. My latest work has been in the design of schools (200,000 sqft +) and police / fire stations in Massachusetts. I can explain the magic of displacement dehumidification and active chilled beams to architects and engineers alike. Very familiar with Mass code and LEED. Please feel free to reach out if you have a job of any size and a schedule of submissions, and I'll be sure to contact you directly for more information.

A Structural Engineer with extensive 15 years of experience working in various types of building designs(including industrial, Educational, Low-Rise & High Rise Buildings & Malls). Effectively collabo... Read more

A Structural Engineer with extensive 15 years of experience working in various types of building designs(including industrial, Educational, Low-Rise & High Rise Buildings & Malls). Effectively collaborates with other engineers and architects. Adept at site visits and inspection procedures. Successfully solved difficult problems that required adaptation and modification of standard techniques, procedures and criteria. • Proficient in ETABS, SAFE, SAP2000, CSI-Col, PCA-Col, Concise Beam, Prokon and Autodesk Auto-CAD , Revit & MS Office. • Design & Analysis of Buildings Structures (Static and Dynamic analysis) • Development of detailed Structural drawings including shop drawings. • Able to work with several of Structural Analysis and Design Software's efficiently. • Development of intrinsic spreadsheets and producing design calculations.• Have knowledge of several International Design Codes including ACI 318, ACI 350, UBC 97, IBC and Standards such as AISC, ASCE. • Structural Modeling • Construction supervision • Structural Detailing • Structural Integrity Assessment

PROJECT EXPERIENCE: 1) Project Involved: Secondary Water Treatment System Description: This is the one of the development project for secondary sewage treatment system. Activities Involved:... Read more

PROJECT EXPERIENCE: 1) Project Involved: Secondary Water Treatment System Description: This is the one of the development project for secondary sewage treatment system. Activities Involved: Have been responsible for Creating 3D parametric modeling, iParts and iAssembly, Structural design, Sheet Metal design, Piping design, Weldment assembly. Have been responsible for Creating Manufacturing drawings, Layout drawings and Sales drawings. Have been responsible for Creating Assembly drawings with weldment details as per customer standards. Have been responsible for Creating BOM and Stress Analysis. Have been responsible for Quality checking for drawing delivery Duration: 6 Months. Role: Design Engineer Platform tools and Technologies: Autodesk Inventor & Vault 2) Project Involved: High Performance Butterfly Valves Description: This is an development project for Butterfly Valves Activities Involved: Have been responsible for Creating 3D Modeling, Casting design. Have been responsible for Manufacturing drawings, Casting drawings, Have been responsible for Creating BOM and CFD Analysis. Have been responsible for Quality checking for drawing delivery Duration: 5 Months Role: Design Engineer Platform tools and Technologies: Autodesk Inventor & Vault 3) Project Involved: Thermal Processing Equipment Description: Designed new equipment such as Plasma Arc Melting (PAM), Electron Beam Melting (E-Beam), Plasma Arc Centrifugal Treatment System (PACT™), Vacuum Induction Melting (VIM), Vacuum Arc Remelting (VAR), Consumable Electrode Castingl, Rototrode™ & Powder Production Equipment according to various customer requirement. Duration: 6 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 4) Project Involved: Water treatment & sewage water treatment Description: I involved in the Product Design & Development from concept stage to Final Production for MicroDynamics microwave ultraviolet (UV) disinfection systems. Activities Involved: Responsible for creating sheet metal design and 3D Modeling Responsible for creating Manufacturing drawings and sheet metal drawings Responsible for creating new chain drive system design for wiper plate Responsible for creating BOM Responsible for Quality checking for drawing delivery Duration: 8 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 5) Project Involved: New Tier IV US Paver Design Description: Designed new parts models and weldment considering Value Engineering aspects. Upgraded sub-systems of Tier III machine to Tier IV and created manufacturing drawings. Created ECN’s, Items and updated Engineering documents in Autodesk PSP (Product Stream Professional 2009), CFD Analysis & Created BOM in ERP. Duration: 3 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 6) Project Involved: Re-design of 10 Feet Auger assembly Description: I involved redesign of 10 feet long Auger Assembly exclusively for US Paver. Designed new parts models and weldment considering Value Engineering aspects. I have created manufacturing drawings and assembly drawings. Created ECN’s, Items and updated Engineering documents in Autodesk PSP (Product Stream Professional 2009), CFD Analysis & Created BOM in ERP. Duration: 3 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 7) Description: High Energy Batteries are used in the Torpedoes Missile in navy submarines. This was manufactured first time in India after Russia. These Batteries initially gives more throttle for the missiles to achieve their target faster. This is a Air Launched Combat Torpedo At 1 ME. This project is done in reverse engineering process of Russian technology. Duration: 3 Months Role: Design Engineer Platform tools and Technologies: AutoCAD, Autodesk Inventor. 8) Project Involved: Description: 　　This is the one of the development project for Electro Chlorinators, which is used to purify the water. The whole Electro Chlorinator machine prototype machine was designed by me under the guidance of project Engineer. I involved all R&D activities, testing, modeling, detailing and assembly drawings. I also involved machine assembly, erection and commissioning. Duration: 1 Year Role: Design Engineer Platform Tools and Technology: AutoCAD, Autodesk Inventor.

I am a freelance Mechanical Design Engineer offering SolidWorks-based CAD services, including 3D modeling, assemblies, and production-ready drawings. Along with technical accuracy, I focus on aestheti... Read more

I am a freelance Mechanical Design Engineer offering SolidWorks-based CAD services, including 3D modeling, assemblies, and production-ready drawings. Along with technical accuracy, I focus on aesthetic component design to deliver visually appealing and functional solutions.

Naval Architect with 20 years experience specializing in the design and construction of marine vessels and structures. I also have experience in component design e.g. awning components, crane and heav... Read more

Naval Architect with 20 years experience specializing in the design and construction of marine vessels and structures. I also have experience in component design e.g. awning components, crane and heavy equipment foundations, drive shaft design, fastener design, tang design. I can provide: - Time-efficient and quality design and drafting services. - Experienced 2d/3d drafter to Classification standards. - Component design, structural modeling and stress analysis (FEA, Euler beam modeling). - Technical report writer with fluency in French. - Ship stability booklets to Classification standards (ABS, RINA, LR, DNVGL, MCA, LY2). - Engineering calculations and problem solving (e.g. draining times, tonnage calculations, ship scantlings, load calculations, anchor specification, structural reinforcements).

Graduate in Mechanical Engineering with 6 years’ experience in MEP Design & Drafting. I can produce Mechanical Builders work drawing (Wall, Slab & Beam) for the construction, HVAC & Plumbing drawings... Read more

Graduate in Mechanical Engineering with 6 years’ experience in MEP Design & Drafting. I can produce Mechanical Builders work drawing (Wall, Slab & Beam) for the construction, HVAC & Plumbing drawings for the Site Service Installation, Equipment Room coordination drawings for the better installation. I am capable to make Duct sizing, Duct Layout and Air Distribution, Equipment selection and Plumbing and Drainage system for small to high rise buildings. I am Proficient in AutoCAD 2D & Solidworks 3D. My Project experience range from medium level residential building to High rise residential cum commercial buildings and everything in between.

Design Drafter with 12 years of experience with: HVAC, hydronic piping, steam, and process piping. Autocad experience creating mechanical construction drawings utilizing sheet sets and external refere... Read more

Design Drafter with 12 years of experience with: HVAC, hydronic piping, steam, and process piping. Autocad experience creating mechanical construction drawings utilizing sheet sets and external references. Experience modeling commercial and residential architecture with Revit 2022. Experience modeling compressed natural gas decompression stations with Plant 3D. 3 years Blue Beam revu experience.

BE Mechanical with 15+Years of Experience in Automotive & Aerospace Industry (R&D DOMAIN). Specialties: 1. On Technology side have worked for Engine emission norms like CPCB-II (full lifecycle product... Read more

BE Mechanical with 15+Years of Experience in Automotive & Aerospace Industry (R&D DOMAIN). Specialties: 1. On Technology side have worked for Engine emission norms like CPCB-II (full lifecycle product development) & Carburetor for 2 &3 Wheeler. 2. Worked extensively for castings, plastic, sheet metal, Fabrication & rubber molded engine peripheral components. 3. Have worked for western clients like Paccar, DAF, Kenworth & CNH for Design of structure, Fabricated Components & weldment drawings. 4. On sheet-metal side have worked for Wheel loader cabin assembly for CNH with standard practices. 5. Design and Development of Power Train ,Engine Packaging, Emission Norms, HVAC, Radiator, Coolers, After Treatment Application Engineering, Centrifugal Pumps, Casting, Plastics(Injection & Blow Molding), Fabrication, Sheet metal, NPD, NPI, APQP, DEMEA,PPAP, DOE,DVP,DFA, Reverse Engineering, Cad platform(Creo, NX), Modeling & Drafting, GDNT, Tolerance stack up analysis, Gear Box Design, Manufacturing Process, VAVE, Tooling, Good communication skills, Knowledge of testing & validation of Engine components, FEA, Power BI, AI tools, Python &Machine Learning. 6. Have handle projects right from scratch which includes beam & Venturi flow calculations. 7. Basic knowledge of performing Data Analysis using Excel, G Sheet & Power BI tools, Automotive Battery Pack Architecture, Battery Design, Basic Knowledge of EVs, Battery & cell technology and components, Motor design, charging methods, Charging standards and homologation, Battery manufacturing process. 8. Familiar with EUMDR, ISO 11607 & FDA guidelines for medical devices design & Aware of new technologies and industry best practices relevant to medical device design.

I am a unique engineer that is highly skilled in taking an idea and turning it into a tangible product. I can design, model, machine, and test ideas. I have worked for many clients in the medical, ind... Read more

I am a unique engineer that is highly skilled in taking an idea and turning it into a tangible product. I can design, model, machine, and test ideas. I have worked for many clients in the medical, industrial, and scientific sectors. I have completed major projects all of which started from nothing. I have designed and manufactured a custom septic tank cleanout cap (patent pending), an insulin measuring instrument (patent pending), and a neutron beam collimator (patent pending), Your ideas and products will improve and grow into high-quality items when you choose to work with me.

I am really good at 2D designing and drafting, and also quite impressive in staad pro column, beam, foundation and slab design

I am really good at 2D designing and drafting, and also quite impressive in staad pro column, beam, foundation and slab design