Hire the best freelance Altair Radioss expert designers for your company

Mechanical Engineer with 3 years of experience at FKT, specializing in full-cycle product development and advanced structural analysis (FEA) for bus seats and complex automotive assemblies. Key Exper... Read more

Mechanical Engineer with 3 years of experience at FKT, specializing in full-cycle product development and advanced structural analysis (FEA) for bus seats and complex automotive assemblies. Key Expertise: • Product Design: End-to-end lifecycle, 3D CAD modeling (CATIA), and manufacturing-ready designs. • Advanced FEA: High-quality meshing and complex solver setups in HyperMesh (OptiStruct & Radioss). • Specialties: Design optimization and FEA troubleshooting. With a B.Sc. and ongoing M.Sc., I deliver reliable, precise, and professional engineering solutions.

I am an R&D Chief Engineer in Product Design, Simulation, and Materials, with strong industrial experience in the development of home appliance products, mechanical components, and engineering-driven... Read more

I am an R&D Chief Engineer in Product Design, Simulation, and Materials, with strong industrial experience in the development of home appliance products, mechanical components, and engineering-driven product solutions. My expertise combines product conception, engineering simulation, materials engineering, and design optimization, allowing me to support projects from initial concept to technical validation. I specialize in: Structural and mechanical simulation (FEM) CFD and thermal analysis Materials engineering (metals & polymers) Design validation and optimization Failure analysis and durability assessment Engineering modeling and technical problem solving I have extensive experience working with both metallic and plastic components, including their: mechanical behavior manufacturing constraints durability performance structural limitations material selection criteria I am proficient in a wide range of advanced engineering tools, including: Altair HyperMesh AcuSolve OptiStruct Abaqus SimLab HyperForm SolidWorks I also have strong programming skills in: MATLAB Python Fortran These skills allow me to build custom scripts, automate repetitive engineering tasks, optimize workflows, and perform advanced data analysis for simulation and product development projects. Services I can provide: CAD modeling and design support Finite Element Analysis (FEA / FEM) CFD and thermal simulations Engineering calculations Materials selection and analysis Product design improvement and optimization Simulation automation and scripting Technical support for R&D and industrial development I focus on delivering reliable, technically sound, and practical engineering solutions that help clients reduce risk, improve product performance, and accelerate development.

I provide innovative Die Engineering, Metal Forming Simulation, Design, and Finite Element Analysis (FEA) Services. These services can range from process development and validation, to product (re)des... Read more

I provide innovative Die Engineering, Metal Forming Simulation, Design, and Finite Element Analysis (FEA) Services. These services can range from process development and validation, to product (re)design, right through to tooling design. This provides the client with options, direction and solutions, to minimize tooling development time and costs by optimizing the process early in the design cycle. I have over 18 years of Automotive Tooling experience (Sheet Metal Forming Simulation / Finite Element Analysis, Surfacing, Solid Modeling, and Tool Design) . Due to this comprehensive tooling and Computer Aided Design knowledge, I have been retained by both the Engineering and CAD software developers Altair Engineering and Cimatron Ltd. for independent consultation on the continuing development and beta testing of their software. I obtained a Bachelors of Science Degree from S.U.N.Y. Binghamton and a Masters of Science Degree from S.U.N.Y. Stony Brook, both in Mechanical Engineering, with the main area of study being Manufacturing and Mechanics of Materials. I have been invited to speak, as well as conduct teaching seminars, workshops and presentations on the various capabilities and potential of Metal Forming Simulation to numerous peers and professionals.

Experienced Product Development Engineer with a demonstrated history of working in the automotive, aerospace and consumer goods industry. Highly skilled in Finite Element Analysis, Engineering Managem... Read more

Experienced Product Development Engineer with a demonstrated history of working in the automotive, aerospace and consumer goods industry. Highly skilled in Finite Element Analysis, Engineering Management, Simulations and Modeling, Testing and Data Acquisition. Strong engineering professional with a Masters of Science in mechanical engineering. PhD candidate. Proven experience on EASA, FAA, UNECE and FMVSS regulations. Also, I have CAD experience on Catia v5 for 5 years.

With over 18 years of cross-functional R&D leadership, I specialize in simulation-driven product design, CAE, and the integration of AI/ML in engineering workflows. I’ve worked extensively across the... Read more

With over 18 years of cross-functional R&D leadership, I specialize in simulation-driven product design, CAE, and the integration of AI/ML in engineering workflows. I’ve worked extensively across the automotive, industrial equipment, agricultural machinery, and defense sectors—bridging the gap between theoretical research and real-world application. 🔧 Core Technical Strengths: Advanced Finite Element Analysis (Crash, Impact, NVH, Durability, Biomechanics) Human Body Modeling for Injury Prediction (IITDHBM) Computer-Aided Engineering (HyperMesh, LS-DYNA, Abaqus, MSC ADAMS, Nastran, Optistruct, Radioss) Engineering Design & NPD Lifecycle Management Predictive Modeling, Time Series, Gradient Boosted Models Machine Learning & AI for Simulation Optimization Engineering Data Analytics & Visualization Mechanical Design & System-Level Validation Digital Twins & Virtual Prototyping 🧠 Key Projects & Achievements: Lead Scientist on India’s first anthropometric Finite Element Human Body Model for defense (published in the Journal of the Institution of Engineers). Former R&D Manager at Mahindra’s Farm Division, contributing to next-gen tractor platforms and simulation-based safety validation. Principal Project Scientist at IIT Delhi, leading crash safety and biomechanics simulations for high-impact projects. Founder of a bootstrapped e-commerce brand focused on artisan products and digital marketing strategy—blending business, tech, and engineering acumen. Successfully managed technology portfolios involving regulatory compliance, design iteration, validation planning, and customer-focused development. 💡 What Sets Me Apart: I don't just "simulate" problems—I solve them using a blend of engineering fundamentals, data-driven insights, and modern AI/ML approaches. Whether it's designing safe, durable components, reverse engineering systems, validating a mechanical product concept, or analyzing real-world field failures using data, I bring clarity, speed, and technical precision. 🎓 Academia & Certifications: M.Tech in Mechanical Engineering (specialization in CAE and Design) Ongoing professional development in AI/ML (TensorFlow, scikit-learn, Python for Engineers) Multiple publications and upcoming research in injury biomechanics and human-centric design for extreme loading conditions 📈 Industries Served: Automotive | Aerospace | Defense | Manufacturing | Medical Devices | Agri-tech | E-Commerce (Product Strategy) | EdTech 🔍 Let’s Collaborate: Whether you're an early-stage startup needing product validation, an engineering firm seeking high-fidelity simulation models, or a researcher looking for biomechanical modeling expertise—I bring hands-on execution, technical leadership, and an entrepreneurial mindset. 📬 Drop me a message to discuss your project and see how we can solve complex challenges, together.

I’m a mechanical engineer with over 10 years of professional experience in Finite Element Analysis (FEA), focused on solving complex engineering problems related to structural strength, stiffness, vib... Read more

I’m a mechanical engineer with over 10 years of professional experience in Finite Element Analysis (FEA), focused on solving complex engineering problems related to structural strength, stiffness, vibration, crashworthiness and topology optimization. Expertise includes: • Linear and Non-linear analysis • Static and Dynamic analysis • Implicit and Explicit analysis • Optimization • Material testing and building material FEM models • Materials: metals, composites, plastics, foams, honeycombs.. Deliverables: • Pre-Processing (Meshing) • Solving • Post-Processing (Results) • Design improvement proposals • Technical Report • FEA Consulting

At Vernalis Engineering, a division of Vernalis, we focus on creating business value by reducing product development time through utilizing state of the art computer aided engineering technologies.... Read more

At Vernalis Engineering, a division of Vernalis, we focus on creating business value by reducing product development time through utilizing state of the art computer aided engineering technologies. Our team has served in both OEM and Service industries for 17 years. This blend of experience enables us to provide feasible, innovative solutions with consistent quality delivered within optimal timescales. All of which, empowers our clients to maintain their competitive edge. Over the years, we have built an enviable reputation in supporting clients globally. We are proud of helping our customers meeting their engineering challenges in the following industries: Automotive Forging Industrial machinery Home appliances Power transmission Special purpose machinery Industrial automation Wind energy CORE OFFERINGS New Product Development Re-Engineering Reverse Engineering Optimization Product Visualization

"I have a Master's in Machine Design with 10+ years of experience in Finite Element Modelling and Structural Analysis. I excel in using CAE tools like Hypermesh, Optistruct, Radioss, and more to tackl... Read more

"I have a Master's in Machine Design with 10+ years of experience in Finite Element Modelling and Structural Analysis. I excel in using CAE tools like Hypermesh, Optistruct, Radioss, and more to tackle complex challenges.

Experienced CAE Analyst and CAD Designer with 3.10 years of hands-on experience in simulation (CAE) and design (CAD) roles. • 3.9 years of Experience on FEA Static Structural analysis, Stress Analysis... Read more

Experienced CAE Analyst and CAD Designer with 3.10 years of hands-on experience in simulation (CAE) and design (CAD) roles. • 3.9 years of Experience on FEA Static Structural analysis, Stress Analysis, Linear and non linear simulation using Ansys Workbench for Automotive components. • Experience on Machine learning - Artificial Intelligence( Al) to obtain the Real test material stress strain curve and its Mechanical properties using Artificial Neural network ANN. • Experience in creating an workflow of Artificial Intelligence in Simulation Activites(Al in Stamping Simulation, FEA simulation- Static and dynamic simulation).. • Expertise in Stamping Simulation, stamping tool design, Blank optimisation & provide design changes/suggestions to the Process team • Expertise in Forming simulations like Riveting, Crimping, Fitting, Coining, Cutting, Orbital Forming, performing Design of Experiments (DOE) • Experience in Welding Simulations and Heat treatment simulation • Bridging the gap between the real test results and the Simulation results by Results mapping process (Manufacturing simulation to FEA Simulation) • Proficient in utilizing a range of software tools including Altair Hyperworks, ANSYS, Simufact, COLDFORM, MATLAB, Pro-E (Creo), Solidworks, Spaceclaim, and Catia V5 • Specialized in FEA simulation for powertrain components, manufacturing simulations, DOE studies, and CAE automation using MATLAB to enhance efficiency and reduce costs • Adept at creating 2D drawings, 3D part models, assemblies, and providing design modifications for automotive powertrain systems • Experience in creating MATLAB Scripts to optimise the simulation Pre processing workflow.

http://www.linkedin.com/profile/edit?trk=nav_responsive_sub_nav_edit_profile

http://www.linkedin.com/profile/edit?trk=nav_responsive_sub_nav_edit_profile

I am a mechanical engineer working as FEA engineering analyst. I have a strong experience of meshing automotive plastic as well as BIW parts in hypermesh. I have been using various simulation solvers... Read more

I am a mechanical engineer working as FEA engineering analyst. I have a strong experience of meshing automotive plastic as well as BIW parts in hypermesh. I have been using various simulation solvers such as LS-dyna, optistruct, nastran, abaqus and radioss for solving various complex multi-physics problems. I am very curious to increase the capacity of FEA softwares by using tcl/tk scripts. It would be my pleasure to work with projects where I can devote my skills and use my knowledge for the betterment of organizations.

An engineering design service company started from 2011

An engineering design service company started from 2011

Skilled Mechanical Engineer with 5 years of experience in industry providing product design & development, validation and simulation. Recognized as key contributor to product development for offerin... Read more

Skilled Mechanical Engineer with 5 years of experience in industry providing product design & development, validation and simulation. Recognized as key contributor to product development for offering design modification and solutions to improve quality, reduce cost and improve overall production techniques.

• Mechanical Engineering Professional with 3 years of Industrial FEA experience, 2 years of Quality Control/Assurance and 1 year of Technical Expert experience. • Industrial FEA experience focusing on... Read more

• Mechanical Engineering Professional with 3 years of Industrial FEA experience, 2 years of Quality Control/Assurance and 1 year of Technical Expert experience. • Industrial FEA experience focusing on - o FEA (Non-linear, Modal and Impact Analysis) of eVTOL aircraft components using Altair Hyper Works (Hypermesh, Hyperview, Optistuct & Radioss) o Estimation and evaluation of critical bearing load on fasteners accompanied with synthetic composites (Fabric Composite, Uni-Directional Composite) and various modes of knock down factors using Altair Hyperworks (Hypermesh, Hyperview, Optistuct). o Suspension Bump Test on coil spring of rear wheel suspension assembly using Transient Structural Analysis (ANSYS, ANSA). Validate using hand calculations with appropriate formulas and methods from Design Book as per ISO standards. o Charpy and Izod Impact test on metals and plastics using Explicit Dynamics Analysis (ANSYS) to examine the scenarios with and without erosion by amplifying the strain values. o Testing strength of bamboo-based pallets with epoxy resin using Static analysis. (ANSYS, ABAQUS, Autodesk Fusion 360). It involved the rigorous study and research of natural composites by applying them in numerous structural components. • Experience in ensuring the lubrication, maintenance, monitoring, and timely inspection of mating and moving elements of the Mechanical Segregator to sustain efficient operation and prevent downtime. • Experience in ensuring quality assurance and control for pipes and electromechanical equipment, including performing non-destructive testing (NDT), material verification, dimensional inspections, and compliance checks with ASME, ASTM, BIS and ISO standards to meet industry and project-specific requirements. • Research experience in the domain of advanced solid mechanics by solving structural mechanics problems. • Good understanding about the macro-mechanics of fiber reinforced composites or laminates. • Getting acquainted to the broad spectrum of advanced mechanical engineering courses – Strength of Materials, Solid Mechanics, Design data book of Engineers, ANSYS Workbench/APDL Verification manuals, Practical Finite Element Analysis, Theories of Failure etc.

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both... Read more

I have been working as an engineer-designer for the past eight years, six of which have been at large production enterprises working in teams of successful and experienced engineers, carrying out both large and small projects. I am proficient in the development of light engineering units, various metal structures, sheet metal products, furniture, and have good knowledge of metal working methods. My skill set includes: 3D Design, rendering, drawings, and vector files. I also offer production support in the following areas: 1 - various metal structures including sheet metal structures 2 - equipment for machine tools of metal working 3 - conveyor equipment 4 - loft style furniture 5 - any type of CAD converting 6 - rendering

More than 10 years experience in 3D modeling in various fields, I worked as a 3d modeler and character designer for video game company and after that I worked with architects on building projects and... Read more

More than 10 years experience in 3D modeling in various fields, I worked as a 3d modeler and character designer for video game company and after that I worked with architects on building projects and visualizations, and today I work as a freelancer, I like to design new products and prototypes. I am also doing 3D printing services for anyone who want to have a prototype in hands for testing before the mass production. It is amazing feeling when your design and idea come to real life as a new product.

I am an Architectural Designer and BIM Specialist with extensive experience in architectural design, structural engineering support, 3D modeling, and photorealistic renderings. I deliver high-precisio... Read more

I am an Architectural Designer and BIM Specialist with extensive experience in architectural design, structural engineering support, 3D modeling, and photorealistic renderings. I deliver high-precision drawings, coordinated BIM models, and permit-ready documentation using AutoCAD, Revit, and Blender. My workflow integrates architectural clarity with engineering accuracy, ensuring every project is technically correct, code-compliant, and visually compelling. I prepare complete permit sets, structural layouts, fabrication drawings, and detailed 3D visualizations for residential, commercial, and custom projects. Clients value my professional communication, fast turnaround, and ability to translate concepts into clean, buildable drawings and technical models. Whether you need BIM modeling, structural calculations, 3D design, or full architectural drafting support, I provide reliable, high-quality results tailored to your project requirements

I am the registered architect in Council of Architecture India. I know the Autocad very well. I worked on many Projects like Business park, Archaeology museum Hostel, Hospital, Residence etc.and worke... Read more

I am the registered architect in Council of Architecture India. I know the Autocad very well. I worked on many Projects like Business park, Archaeology museum Hostel, Hospital, Residence etc.and worked on many projects. I have been completed my B.Arch from IPS Academy Indore India. Which is highly reputed college in India.

Welcome to VOLA DESIGN & CONSULTING, Wondering how outsourcing some or all of your CAD drawings can improve your response times - you need to talk to VOLA DESIGN & CONSULTING. Our CAD drafting service... Read more

Welcome to VOLA DESIGN & CONSULTING, Wondering how outsourcing some or all of your CAD drawings can improve your response times - you need to talk to VOLA DESIGN & CONSULTING. Our CAD drafting services range from simple "paper to CAD" conversion and revision changes to part design and "Top-down" 3D assembly modeling. O​​ur goal is to provide you with a comprehensive CAD service that meets your company's standards and specifications in the time frame that you require. We are located in Shelby Twp, Michigan and serve companies based locally and nation wide. Reverse engineering of existing parts and generate a 3D models of them. Conceptual 3D design models from your ideas and sketches, we can build a 3D model for you to see. From there we can develop and improve your concept with your input. Photo-realistic rendering of product models for marketing and promotion. We also provide evaluation, design services and assistance to independent inventors in preparing and filing provisional patent applications with USPTO.

Welcome to my profile, I am satheeshkumar from Tamilnadu, India. I am an interior designer and I have begin my work as a freelancer. I would like to give benefits of my skills and knowledge to my cli... Read more

Welcome to my profile, I am satheeshkumar from Tamilnadu, India. I am an interior designer and I have begin my work as a freelancer. I would like to give benefits of my skills and knowledge to my client's at a affordable budget by giving my best with my smart working and dedication. I have an experience of 5+ years in civil engineering with softskills :- Autocad 2d&3d, MS office. The services which I have to Offer, * Plan, Elevation & Section * Sketchup with Vray Renderings * Pdf to Cad * Cad to Pdf * 3D Plan * All drafting in Autocad. Thanking for your valid time of visiting....

Experienced Engineering Assistant and Project Manager with a diverse background in construction, interior design, and industrial project management. Skilled in using CAD software like AutoCAD and Inve... Read more

Experienced Engineering Assistant and Project Manager with a diverse background in construction, interior design, and industrial project management. Skilled in using CAD software like AutoCAD and Inventor, with hands-on experience in managing industrial building projects, designing residential and commercial interiors, and overseeing large-scale logistics center finishes. Proven track record of effectively leading teams, coordinating subcontractors, and ensuring project timelines and quality standards are met. Highlights include: Successfully managed industrial construction projects from start to completion. Designed and developed detailed visual concepts and manufacturing plans for interior spaces. Bachelor's Degree in Economics with a specialization in Logistics. Fluent in Hungarian, intermediate English proficiency, and proficient in various technical and design software. Dedicated to delivering precise, client-focused solutions across diverse engineering and design projects.

I am an engineer and graduate of Penn State University with extensive experience in the technology industry. Over the past six years, I have specialized in cryogenics, developing a deep understanding... Read more

I am an engineer and graduate of Penn State University with extensive experience in the technology industry. Over the past six years, I have specialized in cryogenics, developing a deep understanding of advanced thermal and energy systems. Throughout my career, I have led projects from initial concept and design through manufacturing, testing, and final delivery. My work combines technical innovation with practical execution, ensuring that complex engineering solutions are transformed into reliable, high-performance products. I am Passionate about pushing the Boundaries of technology aligned with core engineering principles.

I work as a remote architect and 3D visualizer with a strong focus on interiors. One of the few things I truly believe in and love experimenting with is color. For me, color isn’t just decoration, it’... Read more

I work as a remote architect and 3D visualizer with a strong focus on interiors. One of the few things I truly believe in and love experimenting with is color. For me, color isn’t just decoration, it’s emotion, atmosphere, and storytelling. The right palette can make a room feel calm, energizing, or luxurious, and I enjoy exploring how those choices transform a space. I also believe design is never one-dimensional. I don’t believe in sticking to a single style. I thrive on the challenge of blending contrasts, like the clean look of modern design with the charm of vintage finds, or the sleekness of industrial style softened by natural textures. Every project is an opportunity to create harmony out of difference. As an architect and visual artist, I use color, texture, and light as tools to bring clarity and life to my projects. My renderings aren’t just technical visuals, they’re designed to help clients feel the space before it’s built. Combined with thoughtful layouts and a collaborative process, I create designs that are both functional and inspiring. What I offer: Interior design concepts that balance color, texture, and flow Realistic 3D renderings that capture mood and detail Designs tailored to how people actually live and work A collaborative process that values your vision as much as the final result I don’t believe in one-size-fits-all design. Every project is a chance to tell a unique story and color is often the first word in that story

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photoni... Read more

Hi, I am a mechanical engineering professional in US, have 20 years of experiences in mechanical design, engineering, and simulation. I worked for many different type of clients in Aerospace, Photonics, Oil and Gas, Telecommunication industries, where I successfully completed jobs. My areas of strength are thermal system, structural , laser system, etc design engineering and simulation. I have participated in government contract works for defense contractors and small SBIR companies. I also have collaborated with fast prototype and high end, low cost machine shop who are capable of doing both machining and sheet metal fabrication. I will look forward to working for you. I am available 24/7 through text message and email, in most time, I will get back to you within few hours. Thank you. Steve

I will convert your concept, idea, or rough sketch into accurate and production-ready 3D Printable CAD models. With a strong background in mechanical design, I deliver complete engineering solutions s... Read more

I will convert your concept, idea, or rough sketch into accurate and production-ready 3D Printable CAD models. With a strong background in mechanical design, I deliver complete engineering solutions suitable for manufacturing and presentation. My services include: - 3D Parametric Modeling - 2D Fabrication & Manufacturing Drawings - 3D Working and Assembly Models - 3D Exploded Views for Assembly & Documentation - Motion Animation of 3D-Modeled Mechanical Parts - Piping MTO (Material Take-Off) Extraction - Piping Isometric Generation - P&ID Generation From initial concept to final deliverables, I ensure accuracy, clarity, and compliance with engineering standards, helping you move confidently toward production. Let’s turn your ideas into functional and professional CAD solutions.