3D Printing Design | Meet the minimum thinkness on two small parts of my 3D STL file for Shapeways!

Contest Ended, Winner(s) have been selected.
Description:
I need someone to make a certain part of my 3D anchor stl file a little thicker. Nothing complicated at all! The guy that was working on this file is really swamped with work and cannot complete this edit. This job should literally take less than 30 minutes if you know what you are doing.

On the attached picture it shows that I need to make specific parts of the anchor a little thicker to meet the minimum supported wire thickness of .8mm.

Here's what the email I recieved from shapeways said: "Here is why we cannot print your model: The minimum thickness for free/supporting wires > 1.0mm and supported wires > 0.8mm for this material. Please thicken the wires of the model."

I have specified what needs to be done on the picture attached. Please message me if you need clarification.

If you know what you are doing and have worked with stl. files and understand the thickness minimum that shapeways requires for 3d printing then this should be a no-brainer.
Wants:
Please keep the demesions of the anchor as they are. This should not be a problem seeing how the edits I need done are very simple.
Don't Wants:
Don't change the size or file type!
Software:
  1. anything that can edit and save in stl. format

Entries

1st Winner
#3 Anchor fixed by Cre83D
http://screencast.com/t/SXwYcx92R
more
2013-10-17 16:47:47
#1 anchor by robhare
Download Files
anchor
more
2013-10-17 12:09:43
#2 stl from rhino by N.J.Brizuela
pink old
black new
more
2013-10-17 15:02:42

Discussion

iNigh

Buyer

Thu, 17 Oct 2013 15:07:20 +0000
1.108 w x 1.5 d x 0.173 h

robhare

Designer

Thu, 17 Oct 2013 08:49:42 +0000
when i imported it , the scale seems out. Can you give me the length over all . AndI,ll correct the scale in my drawing.

Similar Contests on Cad Crowd

Rosh
A small, rectangle tag, with a logo on it, and a hole on one side.
childrens playground
childrens playground, just a simple base with 3 activities, a slide off of one side, a tunnel slide off the other, and a pole with two swings off the other.
Ring design with branches and bramble
We are looking for a ring that will eventually be printed in sterling, featuring bare branches. Ring band needs to resemble a branch (or branches), and the top of the ring needs branches wrapping about it. Inside this ring we'll be adding an element later, so we need a pocket underneath the branches that will fit an item that is approx 5mmx20mm. The design sketch shows a bit of a lip to the pocket from the side view, this will help keep the item in place. Once the design is approved, we'll need it in US sizes 5-13.
Logo and stationary design
Hi, Freelancer, i need help from graphic designer, Just iam starting New business, i would like to have Logo and all required stationaries (Logo Design, Power point presentation them and Visiting Card Design and Letter HEAD Design.) Please note following information will help you for your contest 1-Company product is - Engineering service provider in Mechanical/Architect/IT/Graphic design, present website is www.sonenengineering.com this is old site and not covering all versicle, (Present website is not good after these design i want develop website design, i may required your help for rendering of images, page design etc.) 2-You can think 3d logo, you can think symbol with globe, you can think combination of both, iam open to all ideas not specific. 3-Sonen mean is sunrise 4-I prefer descent corporate logo, i do not like too dark, too crowded. 6-For power point presentation theme i have attached one example what i mean. 7-For Visiting card i will provide contact details at final stage. 8-letter head also required descent. Deliverable : All source files and and onset pdf, Jpg. company name is sonen engineering solutions iam expecting something different from regular so that will help me to take ealy decision, presently all looks similar concept.
Sketch drawing to CAD/.stl file
Need the sketch/measurements of each unit converted into a CAD drawing so we can have a 3D prototype printed.