Simple 3 part case design for PCB.

in Electrical Engineering held by d-one
Contest Ended, Winner(s) have been selected.
  • Open
  • Choosing Finalist
  • Ended
I am looking for a designer to create a simple CAD design for an acrylic case. The case will be front, back, and buttons and will have 3 depths. The design will be used to cut the cases using CNC software (Mach III). Refer to concept image for further details. Once a designer is select I will work to finalize the product and make any adjustments that may be needed. At my expense.
Entries should have a 3D angle view of the front or back of the case that show the step height for the PCB components.
  1. FreeCAD


= Buyer's Rating
1st Winner
#2 ED-DI-010006 B 3 part PCB Case by Eliv8Design Ltd.
Mar 21, 2013 11:22
#1 ED-DI-010006 3 part PCB Case by Eliv8Design Ltd.
Mar 19, 2013 22:26




Wed, 20 Mar 2013 20:38:13 +0000
Eliv8Design, to answer your question 3. I would like to CNC the case from .25" (6.35mm) acrylic or similar product. The color may be clear as well as several other partially transparent colors. This will allow the LED to shine through the top of the case (above the buttons). The buttons will be slide into the top of the case and will be held in place by a small lip, similar to a rim on a top hat.



Wed, 20 Mar 2013 20:15:16 +0000
Eliv8Design, I have updated many of the size requirements on the attached case_concept2.png file. This should give you many of the lengths needed. Nice submission by the way.


Eliv8Design Ltd.


Tue, 19 Mar 2013 19:05:27 +0000
Hi - d-one. Without opening the .wri extension file can you clarify a few questions:

1. Overall dimensions of PCB with exact hole positioning (between hole centres) and diameter of holes.
2. How much clearance do you require from the PCB top face and bottom face. Or, what is highest electronic part.
3. What colour Acrylic, or are you using clear. Are you certain Acrylic is to be used.

Thanks in advance,

Eliv8Design Ltd

Similar Contests on Cad Crowd

CAD Concept for Bracelet Prototype Design is a GPS bracelet that should be designed for kids (ages 3-10). The main use-case for the bracelet will be during a family visit to amusement parks / Shopping Malls etc. Key features 1) Electronic's dimensions: 30X35X10mm 2) Child proof lock mechanism 3) Standard Micro USB input (hidden on the side) 4) Screen/watch is optional 5) Only 1 "Answer/Call" button 6) Slick design !!! (no cheap plastics please) 7) QR code embedded on the bracelet (on the outer layer) 8) GSM slot (similar concept to the iPhone Sim card + eject option)
Orcad design
Make some component symbols
in dwtail
Motor Load Study
I need to interconnect a 9000 hp motor and the utility is trying to understand if this is possible to accomplish. What I'm looking for: 1. Consultation and support with modeling the 9000 hp motor. 2. Ability and willingness to explain.
Grid tie Inverter
Single line diagram showing connectivity of grid tie inverter to solar panels