One tooth gear

in 3D Modeling Design held by james matheson
Contest Closed
Description:
I need this

anime.kenmaz.net/view/anime/2911894

It is a one tooth gear

It is a planetary

photos.app.goo.gl/wwEcLtuG9h3kiRHz7

With this on top

photos.app.goo.gl/ynBmdLC1N5ATSqZK6

Like this but attached

photos.app.goo.gl/pFVhDWeFtf8n7mk67


With this arch in each tooth

photos.app.goo.gl/PE3XtowoNhp8L4y36

To make sure the motor gear always arches the right direction

Please let me know
Wants:
3d design
Don't Wants:
Quitters
Ask for Sample:
On request

Entries

#7 ONE TOOTH GEAR by ROCKY17
THANK YOU
more
Jan 13, 2020 7:20
#6 ONE TOOTH GEAR by ROCKY17
See the Attachment. I hope this full fill your requirements
more
Jan 13, 2020 7:17
#5 two-stage reducer ratio 1-50 by Michael M
two-stage, ratio 1-50, engine slot D23.7 mm.
more
Jan 3, 2020 4:10
#3 FIVE COLLAR GEARS by ROCKY17
It’s the most effective gear to create the opposite deriction betwee the outer and inner layer or stage of gear. It has 5 medium Size as main Pillar of gear to create the opposite direction of gear cycle.. it can be combine with other configuration to maximize the effective the energy to rotate the gear.
THANKYOU
more
Dec 30, 2019 13:50
#2 belt by xinren ryo
Hi, I'm an architect.
I have more than six years of experience in architectural design.
I studied in the Department of Architecture at Liaoning University from 2006 to 2011.After graduating from college, he has conducted many architectural design and formation design.
Also, I have been on-site construction for more than 3 years.
My basic skills are building floor plan and building technology design, exterior and interior design of building, forest and landscape design, furniture design and manufacturing design.
The program used is Autocad,3Ds max,Sketchup,PhothopCC,Revit,solidworks.
more
Dec 28, 2019 0:50
#1 gears ratio 1:5 by Michael M
One link with a gear ratio of 1: 5. If you need more - add the number of links. If you really need 1 tooth, it costs much more.
more
Dec 27, 2019 3:25

Discussion

Mon, 13 Jan 2020 12:30:20 +0000
James,I don't think anyone can figure out exactly what you want from these sketches.
Mon, 13 Jan 2020 12:27:36 +0000
No prepaid,no design, man!
Sun, 12 Jan 2020 21:32:10 +0000
Can you believe no one could send me a design and they keep complaining
Like seriously
The only person send a completely wrong design that wasn't even close and he's complaining about it
Fri, 10 Jan 2020 07:22:47 +0000
No prepaid, there is not design,but there is no time even.
Thu, 02 Jan 2020 09:42:25 +0000
Hello James. Probably nice contest. Only it's not clear enough for anyone here. I suggest you to make a sketch of the mechanism on a paper and take a picture of that with your phone. Do not hesitate to add all the details you already know. And please make this contest prepaid. This will motivate people.
Mon, 30 Dec 2019 14:35:02 +0000
Hello, I'm sorry to say that, but it's not clear at all what you are trying to illustrate, I think you better use a pen & paper to explain it.
Best regards
Sat, 28 Dec 2019 09:52:47 +0000
I don't understand from first animation.. with respect to centre point, other marked point with be rotate..but in animation is different..

Is that output you want ultimately?
Sat, 28 Dec 2019 08:35:14 +0000


Hi James, I required Some Points to Add In Design,
- What The Ratio You Want By Input To Output?
- Output direction (C/W or Ac/W)?
- Size Of The Arrangement ?
- Is It Ok to Design In Autodesk inventor Software ?
Fri, 27 Dec 2019 18:33:51 +0000
https://photos.app.goo.gl/U2v433eZbHf5HeXz6
1:500
Fri, 27 Dec 2019 18:31:12 +0000
https://youtu.be/TErnvmNG5Rw are you talking about something like this?
Fri, 27 Dec 2019 18:28:31 +0000
Please make contest prepaid
and share some technical dimensions and details of the motor shaft

thank you
Fri, 27 Dec 2019 11:26:15 +0000
Sorry James but i am not getting what you are trying to say. Can you please be technically more descriptive?
Fri, 27 Dec 2019 03:54:44 +0000
Please tell me the diameter of gear or ratio or module
Fri, 27 Dec 2019 01:02:53 +0000
Can I get a better sample please to ease the design

Michael M

Designer

Thu, 26 Dec 2019 23:46:23 +0000
What is "one tooth"? This? http://www.ec-gearing.ru/index.php?lg=en

Similar Contests on Cad Crowd

Total Winner!!!! - Best Tabletop - Super Ellipse (in the manner of Piet Hein) with Beveled Edge
DXF CAD Drawing of a Super Ellipse shaped tabletop with the end goal being a version of Eero Saarinen's Iconic 60' Tulip Table (picture of tulip table attached below. As far as I know, Saarinen's table was only fabricated with oval and round tops. The Super Ellipse shape works best in the setting I am designing). The tabletop will be fabricated out of a 1.25" man-made composite, marble-like, material called Silestone. (If it helps you envision the end result, the material is Silestone "Zeus White Extreme" in matte white). The dimensions of the table top should be: 56" long x 36" wide. (and will be attached to a metal pedestal base). The underside of the table top should have a 1.25" bevel from the outer edge of the table top towards the center of the table top.
Toy Stroller
Design a toy stroller. I have an example. Just the frame not the basket. I doesn't need to fold up. I would like the tubing thicker then the one in the picture.
Mechanical Block Grab
I badly need a design for a mechanical block grab as in this link: http://www.kmplant.com/productimages/prod0118_1.jpg and also see this video below: https://www.youtube.com/watch?v=ehXqP1zgbIE I need it with the lock mechanism that can lock and release mechanically, a rachet lock
Exercise equipment design
We are looking for a pretty simple piece of exercise equipment. First, please see the attached photo. You will notice how the male is assisting the female with her sit ups by holding her feet down. We'd like to create something that you could strap on to your shoes/ankles/heels so you wouldn't need a partner to weigh you down. We don't want it to be too bulky of an item. Something that is light, can be easily carried, and has a good design.
Flying Currency
Hi there, I have a very simple project. I need to produce still photos of flying currency. I will provide flat photos of currency and I need them mapped to models of bills fluttering in the wind. I need about 15 TIFFS produced in high res. You would have to model very simple forms, add the currency/money texture then render.