Green KeyBlind

in Industrial Design Services held by jadz61
Contest Ended, Winner(s) have been selected.
Description:
We are looking for concept designs for our smart lock technology. There are 2 aspects to this design. We want to design the tesla of smart locks. In terms of functionality and intelligence but most of all look, feel. Something that stands out from the crowd of pretty ugly basic designs that have already made it to the direct to consumer market. Looking to innovate but also hide inside the lock somewhere for a real key that is not visible unless of emergency.

1. We are designing a reader for granting entry into a condo or apartment building, that a user will touch their phone using nfc or blu tooth. Each reader will connect directly to the cloud via iot chip inside. There will not be big cables and wiring needed in this case.

2. We are looking to design and actual door handle and smart lock for the doors of condos and apartment buildings moving deadbolt locks. These will not be individually purchased as we are a b2b business.

Please evaluate the images and the companies designs i have uploaded as a base for the product line we are building. I would like similar feeling to latch, but with a little more tesla influence. That goes foe the reader of the phone and for the lock that goes on a condo or apartment. Please disregard the middle product on the screen shot for latch. We are building the first and third. Kisi as well imagine creating that reader that looks and feels so much better, something you can see in a modern building built for the internet age.
Wants:
since this is a concept design i wont be too tight on specs regarding size. But understand this is being designed for the interior of a building. Inspiration is what tesla did to the media console of their car. One large elegant screen

Things I would like to see in this design in modern simplicity for the connected world. A product that would fit in with medium to higher end condos and apartment buildings, and something that would be very powerful and elegant , while staying seeming flush / hidden when not in use.

1. incorporation of an led touch screen ( be creative but realistic with shapes)
screen must be large enough to interact with but not be out of balance with a door and how the lock and deadbolt proportions currently are. Pushing boundaries but not being weird.
2. the ability to enter a numeric code that id only presented but fully hidden otherwise.
3. hidden location for manual key driving deadbolt lock
4.
Don't Wants:
bulky, cheap looking products / or more of the same this is currently out on the market in terms of design. If you google smart locks you will see what i mean.
Software:
  1. AutoCAD (latest)

Entries

#27 Ultra minimalist smart door lock system by cosmiclab
Hello,
Here is my design concept. This design is very sleek & modern. it has a built-in camera & numeric touchpad. Please review this design & let me know your feedback.
Thank You
more
Aug 26, 2019 20:49
#37 Smart lock with Bio-metric Fingerprint reader - Minimalist Rounded Design by cosmiclab
Hello,
Here is my new smart lock concept with an embedded fingerprint reader on the handle. The overall look of this lock is very minimalist and modern. I have added an emergency mechanical keyhole hidden under the lock handle. Please review this design & let me know your feedback.
Thank you
more
Aug 28, 2019 15:55
#57 Smart lock with Bio-metric Fingerprint reader - Separate Screen & Handle by cosmiclab
Hello,
Here is the new lock concept with separate screen & handle. Please Check this concept & let me know your feedback.
Thank You
more
Sep 1, 2019 14:15
#59 Smart lock with Bio-metric Fingerprint reader - Minimalist Rectangular Design by cosmiclab
Hello,
This smart lock has an apple or tesla like minimalistic modern design. Please check this & let me know your feedback.
Thank You.
more
Sep 1, 2019 18:38
#60 Minimalist smart door lock system with fingerprint by cosmiclab
I have changed the handle design. Please check this design & let me know your feedback.
Thank You
more
Sep 1, 2019 19:07
#19 smart lock-basic design-01 by supra77
this my fist design, please feedback..
Thank you
more
Aug 24, 2019 5:37
#8 Sleek Smart Lock by Expekto_Patronum
This smart lock is simple and elegant, on par with the most innovative technology of today.
It offers:
- An LCD touch screen for a combination lock (with curved edges)
- Discrete when not in use: screen is activated by drawing a U shape on it
- A numeric combination lock for unlocking the door, as well as an NFC phone unlocking mechanism
- A secret sliding cover to reveal the manual lock for emergencies. A key can be inserted to open the door after sliding open the key
Please note the design is for visualization purposes and not made to proper dimensions
Feel free to contact me for additional requests
more
Aug 20, 2019 10:33
#4 02 by Creative Paul
It was done before your last feedback :-)
more
Aug 19, 2019 17:43
#5 3 by Creative Paul
3
more
Aug 19, 2019 17:43
#1 01 by Creative Paul
one first idea
more
Aug 18, 2019 22:52
#11 Smart Lock by Islam Heikal
If you like the concept, please inform me so i can modify it and it's dimension as you like it.
more
Aug 20, 2019 12:56
#10 Smart Lock System with a camera (titanium Stile) by walxo
Aug 20, 2019 10:50
#3 This design is without handle in gold variant by walxo
Aug 19, 2019 12:29
#6 Smart Lock by Fadi Sayegh
Aug 20, 2019 3:18
#31 Smart Locking System on a door by walxo
Full Assembly Design
more
Aug 27, 2019 11:34
#26 Smart Locking System round design by walxo
Slim,smart and round Design
more
Aug 26, 2019 13:01
#30 Smart Locking System round performance by walxo
Aug 27, 2019 9:48
#17 Smart Door Lock System by walxo
Simple Slim Design with a hidden key slot large oled display and camera
more
Aug 23, 2019 8:28
#79 Smart Lock_with 2 option Handles. by Darcas
Hi Buyer,
I would like to submit my entry and I hope you still accepting and consider my design of your selection. Kindly review my design, if you have comments and suggestion, please let me know.
Kind regards,
Darcas
more
Sep 4, 2019 14:43
#69 GreenKey Design #1 by ahmadnazree
Hi CH, please find the attached design for your review. Thank you very much.
more
Sep 3, 2019 18:07
#90 Smartlock/Doorhandle design by GregHyde
Please see attached my designs for a smartlock/doorhandle design. I would be more than happy to work with you on adapting my designs to your needs and dimensions should you choose to my designs. I also think you should consider the use of a display with a white background to give it more of a minimalist modern feel.
Thank you for your consideration.
Regards
Greg Hyde
more
Sep 7, 2019 9:57
#76 GreenKey by Muntazir Merchant
I have developed a couple models and designed a new handle-less module with a camera on top and a fingerprint scanner on the bottom. Screenshot shows grey so it is easy to spot the fingerprint scanner.
more
Sep 4, 2019 11:41
#72 Smart Lock Vit G. v1 by Vit Gean
Sep 3, 2019 22:52
#73 DOOR LOCK FOR GREEN KEY PROJECT by Akram Shaikh
I hope you like my project. Thank you.
more
Sep 4, 2019 1:04
#48 Smart Lock by TDT Concept Design
Deviation from traditional smart locks with multifunctional LED touchscreen on handle.
more
Aug 30, 2019 5:30
#7 Green Key by Raj Rajpara
Please have a look at the concept, and let me know what you think about it.
more
Aug 20, 2019 7:38
#86 Smart Lock by saddlepiggy
Let me know if this is not what you want.
The large screen is a normal screen. The top can be either a cover or a screen. By pushing down on the side ridge, it opens up to reveal the key hole.
The size can be adjusted very easily if it is incorrect.
more
Sep 6, 2019 21:14
#94 Green Key compact by Muntazir Merchant
Sep 7, 2019 10:59
#78 GreenKey by Muntazir Merchant
This is another handleless model Ive developed. Let me know if you require any changes to be made.
more
Sep 4, 2019 13:33
#41 GreenKey by Muntazir Merchant
Aug 28, 2019 21:54

Discussion

Showing last 20 comments - View All
Sat, 31 Aug 2019 19:55:17 +0000
Hi there! (I see many entries xD) Wait for me, I'm gathering technical research, and aesthetics for the design. I don't send anything that occurred to me in 5 minutes, just upload something with which I have worked thoroughly philosophical, anthropological, technical and aesthetic! D wait for me!

jadz61

Buyer

Tue, 27 Aug 2019 13:31:54 +0000
Look too black. need more accents less ciruclar and add in a white door. Also accents on lights for NFC tap zone.

jadz61

Buyer

Tue, 27 Aug 2019 13:31:20 +0000
Can you produce something else, this is not very appealing to me.

jadz61

Buyer

Tue, 27 Aug 2019 13:30:45 +0000
No lock turning unit. I like the design but remove that and add more accents on the NFC tab section and on the countour with lighg effects. put on a white door.

jadz61

Buyer

Tue, 27 Aug 2019 13:29:56 +0000
Not in love with this one, looks a metal frame over an iphone. I need sometyhing that looks more like a spaceship lock system made by APPLE>

jadz61

Buyer

Tue, 27 Aug 2019 13:29:12 +0000
Nice concept but I would want to see a less big more slick compact design preferably in black with more light accnets like LED countour or something like that.

jadz61

Buyer

Tue, 27 Aug 2019 13:28:20 +0000
I like how you are hiding the keyhole. but if we loose the piece we are ttoast. Can you find other ways to hide it and not loose th piece. Also do something more rectangular or circular please. Lastly try black. Add it to a door white and add just the screen and another one with a handle to pull the door

jadz61

Buyer

Tue, 27 Aug 2019 13:26:44 +0000
the keyhole is too obvious. I would like to make it as invicible as posisble.

jadz61

Buyer

Tue, 27 Aug 2019 13:26:14 +0000
Please research how tick the lock should be. I feel it is too bulky, a key would not reach to the chamber on this design.

jadz61

Buyer

Tue, 27 Aug 2019 13:25:26 +0000
would want to see more accents to it and lighting effects. Also can you please add a handle to pull the door.?

jadz61

Buyer

Tue, 27 Aug 2019 13:24:32 +0000
Really nice but looks too bulky. would want to see a more slick futuristic frame.

jadz61

Buyer

Tue, 27 Aug 2019 13:24:05 +0000
I like what you did on the handle. Possible to do around the whole unit and try different things like that.?

jadz61

Buyer

Tue, 27 Aug 2019 13:23:35 +0000
Very slick but ill like to see more lighting effects. Also that handle you put looks weird. I want to see one just the screen and one screen with handle. I am sure it will get very dirty if you leave it solid on the bottom of handle. Try more things regarding the handle. Accentuate more thte NFC tab via lighting or accents.

jadz61

Buyer

Tue, 27 Aug 2019 13:21:31 +0000
I want to accentuate more the lighting. try to make it more futuristic where the NFC tap will happen.

jadz61

Buyer

Tue, 27 Aug 2019 13:20:48 +0000
I would need to see this on black. Add more lighting effects like countour LED or shadows. I need to see one just the screen and one with the handle. ON a white door please.

jadz61

Buyer

Mon, 26 Aug 2019 23:49:09 +0000
Please focus attention on the LATCH family of products. We Require designs for the unit itself as well the Unit integrated with the door-handle. Rectangular and circular designs. Doing both would put you at the front if they are good. Looking for modern industrial design with metal casing black, matt black, silver

REDA

Designer

Sun, 25 Aug 2019 19:16:31 +0000
Hi,
il faut etre invité pour participer ?
j'aurais aimer montrer mon design ici .
;)

jadz61

Buyer

Sat, 24 Aug 2019 12:58:37 +0000
I have extended the contest 4 days and increased the prize values. Please submit as many variations and ideas as possible. If I hav commented on your design please make the changes or innovations. Thank You
Tue, 20 Aug 2019 18:33:22 +0000
Sounds good , plz do send the invite.

jadz61

Buyer

Tue, 20 Aug 2019 18:19:56 +0000
I have added a new image to consider. We are developing the same interface to be used for a smartlock on a condo or apartment door. BUT as well as the reader for access to the main entrance and additional access restricted doors that are in public spaces. Also a third for the lock and doo handle for for the exterior of a smaller condo building. I would like to see all options. EVERYTHING basing of the same interface.

Similar Contests on Cad Crowd

Processing Unit
Designing, detail engineering and submission of design, general arrangement, fabrication detailed drawings and 3d model of a continuous process, fully automated controlled Pilot unit for the capacity of 50 to 75kg.hr feed stock MSW plastic waste processing at high temperature & oxygen free with atm pressure.
Cable Spacing Appratus
New Apparatus for Spacing of Conductors in Cable Bus Assembly. The apparatus shall be constructed of nonferrous materials. REQUIRED The apparatus if designed from nonmetallic materials shall have a flame rating of not less than V0. INFORMATION The apparatus shall be UV resistant in accordance with ASTM G151. The conditioning period shall be 1,000 hrs. INFORMATION The apparatus shall be non-hygroscopic in accordance with ASTM D570(2).INFORMATION The apparatus shall be crush resistant such that there shall be no signs of cracking, warping, or breakage after the crush at room temperature performed as follows: a) Each of 10 samples of the non-combustible support blocks material and insulated mounting means shall be laid along the 50 mm width of a flat horizontal steel plate and crushed against the plate by a 19 mm diameter solid steel rod moving down at the rate of 12.7 mm/min. b) The longitudinal axis of the rod shall be horizontal and at right angles to the non-combustible support block and insulated mounting means the 50 mm dimension of the plate. c) The results of tests of these two sizes shall be considered representative of the performance of all sizes. INFORMATION The apparatus shall conform to the following impact tests Each sample from a set of 10 samples shall be laid across a rigidly mounted 19 mm diameter solid steel rod with the longitudinal axis of the non-combustible support blocks and insulated mounting means horizontal and perpendicular to the longitudinal axis of the steel rod. b) Each of the samples shall be subjected to the impact of a 4.54 kg free-falling flat-faced cylindrical steel weight having a diameter of 50 mm. The edges of the impact face shall be rounded. The longitudinal axis of the weight shall be perpendicular to the horizontal plane of the cable sample and shall be centered over the intersection of the cable specimen and steel rod. c) The weight shall be dropped from a height of 2290 mm above the upper specimen surface at an energy of 101.7 J. Not more than 2 samples out of 10 shall exhibit failure. Failure occurs when the sample cracks or breaks, as determined under normal or corrected to normal vision INFORMATION The apparatus must allow for the ability to be positively secured to the enclosure REQUIRED The apparatus shall be designed to contain and accommodate the diameter of the cable and have chamfered edges for the cable bores. The support blocks shall be adequately closed and have enough strength and rigidity so that additional levels of cable shall not distort or damage the cable insulation. All cut edges or exposed surfaces shall be sealed against degradation due to weather, if necessary. REQUIRED The Apparatus shall support the cables mechanically within the rectangular cable bus enclosure of varying sizes from 6”x6” to 12”x48”. REQUIRED The apparatus shall allow for installation of cable one tier at a time without the cable being installed through the aperture of the apparatus. REQUIRED The ideal apparatus will allow for the use of numerous cable diameters using either inserts or other modular designs to allow for the minimal number of apparatus components. See appendix A of current aperture sizes required. REQUIRED The Ideal apparatus will allow for numerous cable configurations. See Appendix B The ideal apparatus will not only offer reduced product customization through a modular design but will also be cost competitive compared to the current design.REQUIRED See attached examples of competitive apparatus or images for inspiration being for examples of different approaches, not to be duplicated or imitated. All criteria is listed above tagged "INFORMATION" is only to serve as guidance as we don't expect a designer to be able to confirm compliance with testing procedures. This can be done by us, however it should serve as guidance to material selection and overall design. For example given the flame rating requirement designing an apparatus from cardboard would be a non starter. But an injection molded design would allow us to pick a suitable polymer.
Reverse Flow, Offset BBQ Smoker: That is actually visually appealing.
Reverse flow, offset BBQ smokers cook amazing barbecue. I am looking to start a small custom reverse flow bbq smoker fabricating company that prides itself on quality built reverse flow bbq's with the design and visual appeal that our industry lacks. 97% of smokers out there are made with all-black powder coated steel. With this business venture, I want to target the every day "backyard BBQ'er" and have these smokers sit on their back porch/deck. From the various company's out there who build smokers, there is very little color and trim details such as stainless steel, wood accents and painted powder coating. I'm looking to change that. I'm looking for someone to create an initial design for our first prototype. From there, the plan is to create 3-4 more different sized reverse flow smokers with varying design finishes. Final goal would be to have 5 different sized reverse flow smokers to create a "product line" for us to build and sell.
Men's Wristwatch
The design submission should include: Rendered Imagery: showing front, back, top, bottom left and right, and 3/4 perspective views. Rendered views for the front, back, top and bottom can be combined into one or two image files if appropriate. The perspective view must be a separate image. It is encouraged that the rendered images be as realistic as possible and provide enough lighting to show design details. Environment and lighting style is left to the designer. Requirements: 1. Men’s wristwatch. 2. It should have an outdoors and sporty look. An ideal buyer would be someone in the armed forces. 3. Illumination around the watch ring and on the hours seconds and minutes hand using tritium tubes. 4. The closest competition brand would be Luminox.
Medicine Ball
We are looking for design concepts for a PVC/Rubber medicine ball design. I have included a file showing some of the products on the market. We do not want to copy the designs but want something unique and attractive for a commercial gym application. We desire the ball have a texture on the surface to aid in gripping the ball when it is thrown. Color scheme desired is gray and orange but we are open to other ideas if you think it is very attractive. The ball diameter needs to be 14 inches in diameter. A logo needs to be on the product and also the weight of the ball in pounds.