Design concept of a laptop standBlind

in Product Design held by Donava
Contest Ended, Winner(s) have been selected.
Description:
Need:
Concept design of a laptop stand, something new and cool
Must be light weight but durable, can use wood and aluminum
Can be flexible in operation, foldable, having drawer or any cool ideas
Aesthetic look and feel
Cheap

Thank you
Wants:
Must be light weight but durable, can use wood and aluminum
Can be flexible in operation, foldable, having drawer or any cool ideas
Aethetic look and feel (kindly provide render view in any angle if require)
Cheap
Don't Wants:
Not expensive
Not copy traditional stand available in the market
Software:
  1. 3D Design software
Additional Information
The attached picture is what i mean "laptop stand" already available in the market

Entries

1st Winner
#27 Laptop stand flexible by Mahan
Same functionality and dimensions as before, with a reduced number of parts
BR/ Mahan
more
Aug 19, 2018 20:19
#15 Laptop stand flexible by Mahan
Elegant and foldable stand
Please see the presentation first
Will submit a more cost-effective version soon as well
BR/ Mahan
more
Aug 16, 2018 20:47
#4 Design concept of a laptop stand by DjayRC Design
This Is Wooden Laptop Stand Design. Simple + Low Cost + Easy To Handle + Foldable* Or You Can Say Close It + Light Weight Model + Space Saving. If This Meets Your Requirement Then i Will Submit 3D Model File.
Waiting For Feedback......
more
Aug 10, 2018 19:44
#6 Design concept of a laptop stand by DjayRC Design
Here Is SLDPRT+SLDASM Files Of My Previous Entry.
Waiting For Your FeedBack.
One More Model Submit Very Soon....
more
Aug 13, 2018 18:53
#23 laptop stand by achraf Bouziane
Aug 18, 2018 10:41
#3 Wooden Laptop Stand by Srđan Scherer
It is basically simple and chip made from upper wooden part and 2 sheet metal part that is attached to upper part with screws. Upper part is made from wood oak and sheet metal is from Aluminium. That model have holes for ventilation.
more
Aug 9, 2018 17:22
#5 laptop_stand_c1.stp by Karthikeyan Arumugam
Hi,
Please find the attached Laptop stand concept 1 files.
Thanks and Best Regards
Karthikeyan Arumugam
more
Aug 13, 2018 8:24
#7 laptop stand by Fadi
I have designed this laptop stand according to your requirements. it's low wight and contain on pipes of Freon gas and fans for high quality of refrigeration. also has a mouse stand.
p.s Contact me if you want any changes
kind regards
more
Aug 13, 2018 21:35
#8 laptop_stand_c2.stp by Karthikeyan Arumugam
Hi,
Please find the attached Laptop stand concept 2 files.
Thanks and Best Regards
Karthikeyan Arumugam
more
Aug 14, 2018 10:33
#10 laptop_stand_c3.stp by Karthikeyan Arumugam
Hi,
Please find the attached Laptop stand concept 3 files.
Thanks and Best Regards
Karthikeyan Arumugam
more
Aug 16, 2018 9:44
#14 Laptop Stand_Wooden Material by Krisnadi
Hi...this is the result of my design of the laptop stand, if you are interested please give feedback for me...
Thanks
Best Regard,
KRISNADI
more
Aug 16, 2018 17:53
#17 Minimal Wooden Stand by Ridley Designs
This simple wooden stand features a carrying handle, cushion, and an inclined working platform. A slide-out shelf can be added for a mouse or a small compartment on the underside if desired.
more
Aug 17, 2018 2:32
#18 Minimal Wooden Stand by Ridley Designs
Aug 17, 2018 3:14
#19 FOLDING WOOD by arkiattack
Hello! I understood that the use of wood and aluminum is an aesthetic taste that pleases you, my proposal plays with it, keeped a design, elegant, modern and functional, to be used from the bed, in the room or office. I also include folding legs. I hope I appreciate that. ;)
more
Aug 17, 2018 8:32
#20 LAPTOP STAND WITH FOLDING LEGS by arkiattack
Hello! (I think I had problems uploading the files, I try again):D
See the PDF and let me know if you what you think!:D
more
Aug 17, 2018 8:42
#21 Simple Lightweight Laptop Stand by Harjeet Sharma
Hi,
It's a simple lightweight foldable Laptop Stand which is easy to carry and easy to use.
Hope you like the design.
Thanks & Regards
Harjeet Sharma
more
Aug 17, 2018 10:37
#22 3-step Laptop Stand by KashGohel
I made this stand with furniture grade plywood, finished with wipe-on poly or spray varnish, but you are welcome to use other materials such as solid wood, aluminium etc. Assembly and dissassembly is an easy 3-step process and expansion is feasible on the other side. The stand can be used while sitting on the bed, a plus point for chilly days.
Hope you like it.
Thanks!
Kind regards,
Kashyap Gohel
more
Aug 17, 2018 17:16
#28 laptop_stand_c4.stp by Karthikeyan Arumugam
Hi,
Please find the attached Laptop stand concept 4 files.
Thanks and Best Regards
Karthikeyan Arumugam
more
Aug 20, 2018 9:36
#2 Rotating Laptop Stand with Mouse pad and Drawer by Hanamanth kaleli
I have designed the laptop stand, keeping in mind your requirements. I have made provisions for mouse and also an optional drawer at the bottom side of the of the mouse pad. The laptop stand can be rotated or locked in one position especially while working. I am sure you won't find this design of the laptop stand in the market. I have designed the base part of the laptop stand in such a way so that it looks stylish and perfectly balanced. It can be made from wood or any other material of our choice. I have attached a rendered image of my design. I think my design meets your needs. Contact me if you want any changes.
more
Aug 9, 2018 10:08
#11 Adjustable Laptop Stand by chaka254
This is a model designed for a Laptop stand. You can make this model by using wood.
more
Aug 16, 2018 12:51
#13 Laptop Stand by Ahmad47
I've created a curved stand in aluminum. The weight is less approximately 0.6 kg.
more
Aug 16, 2018 17:50
#1 Non electric laptop cooler stand by Nirmal Mehta
Laptop stand has been designed to minimise the use of USB coolers.
The principle build of vents as hexagonal design is inspired from Honeybee's Comb, it maintains the strength with minimal use of material, further helping more air to pass into the processor cooler fan. The size is kept in such a way that maximum air inflow is provided for faster cooling of CPU also keeping in mind the carry load of it.
The concept of vents is inspired by compressed air cooling technique, this technique helps inflow of cooler air to get into processor fan, thus resulting faster and effective cooling without use of any external devices or forces.
If you notice, the laptop stand has kept at an angle for three reasons:
1. The angle provides a gap for air to pass through wherever you use the stand.
2. It helps your laptop on rest at an angle where wrist are not much bent, hence relieving from wrist bends while typing.
3. Tilt helps the screen stay perpendicular to your eyes, which effectively reduces eye strain.
I have tried to cover maximum uses of it. You can add your concepts and make the maximum use out of it.
more
Aug 6, 2018 19:51
#12 portable stand by jerrymark1
keeping in mind the uniqueness, cheapness and aesthetics requirement for the stand design. As studying the market for uniqueness i have come up with design, the table material is of aluminum as it is good for heat rejection and designed slots in the table would allow easy air suction for the fan and it would be much lighter. The table is big enough to handle a laptop and a mouse. The main uniqueness is the leg. It is designed for comfort leveling of table on the bed. As sitting on the bed i understand that the level of ground will be unequal for every leg that would result in unbalance of the laptop so, this problem is solved by variable length of each leg. Another uniqueness is that the legs can be folded to the table, hence it could be kept in a backpack in case of travelling to a hotel or to relatives. The pin in between the leg is a lock pin which can be easily removed and inserted and would lock pretty good. The base of the leg is rounded for the safety of bed sheets. A nice black mate texture would make it . I hope you would like the design as it falls in for your requirements....
more
Aug 16, 2018 13:59
#25 laptop stand by Raghav india
its just a conceptual model made on sheet metal basis
more
Aug 19, 2018 8:38
#30 laptop stand by Fadi
hello Sr
I have designed a new model of laptop stand.
please see the first the presentation
kind regards.
more
Aug 21, 2018 7:33
#31 laptop stand by Fadi
hello Sr
I have designed a new model of laptop stand.
please see the first the presentation
kind regards.
more
Aug 21, 2018 7:35

Discussion

Donava

Buyer

Tue, 21 Aug 2018 05:44:23 +0000
Thank you everyone for your effort. And congratulation to Mahan!

Donava

Buyer

Sun, 19 Aug 2018 05:33:02 +0000
I will add 2nd prize later

Krisnadi

Designer

Sat, 18 Aug 2018 03:09:10 +0000
Hii...donava....there is a comment for me about the design that I sent

Donava

Buyer

Wed, 08 Aug 2018 09:16:45 +0000
Hi, thanks for your question. As long as its innovative enough, the manufacturing cost is no issue
Wed, 08 Aug 2018 08:32:24 +0000
Hi Donava..

What is your budget for this Stand to make, And If you make yourself?

Because I will choose some parts for purchases to build this stand assembly to easy.

Please advice.

Thanks,
Madhan

Donava

Buyer

Tue, 07 Aug 2018 06:41:03 +0000
Yes i need everything new and innovative!
Tue, 07 Aug 2018 05:16:25 +0000
Hi Sir Donava do you need cooling stand with cooling pad

Donava

Buyer

Tue, 07 Aug 2018 02:40:51 +0000
Hi everyone, i use it on bed or while sitting in the living room. I prefer using a mouse, not touch pad

Donava

Buyer

Mon, 06 Aug 2018 19:19:33 +0000
Yeah, if i can use it everywhere it is better
Mon, 06 Aug 2018 18:29:18 +0000
Hi Donava, where do you want to use the laptop stand? on desk, on bed or while sitting on the living room

Donava

Buyer

Mon, 06 Aug 2018 16:10:30 +0000
Hi, please use keyword: "laptop stand" to search on google. I need one new, cool and outofthebox design for personal use

Krisnadi

Designer

Mon, 06 Aug 2018 13:24:28 +0000
Sorry I wrong to say your name, donava

Krisnadi

Designer

Mon, 06 Aug 2018 13:22:43 +0000
Hello...Donova...are there design examples or images for the desired reference...???

Similar Contests on Cad Crowd

firearm designs
the image of blank slide 1.jpeg is our blank firearm , we want to have outer design on it for now we don't need any 3d designs we just need the 2d graphic designs that will be on it like examples which you can draw using photoshop or by pencil whatever you want as a sketch after we choose a concept we will ask you to make the 3d files of it .
Innovative Pen
Please make some Pen (tool for writing) with Innovative From you, This pen does not make with regularity sistem, It made not from plastic, so please make your pen as innovative and give me matterial suggestion
Bicycle in Autodesk Inventor 2013
I need a bicycle drawn in Autodesk Inventor 2013, with the following conditions: - All the project MUST be done in Autodesk Inventor 2013 - The sizes of the parts are random, but must always have only one decimal place (eg: 13.4 cm) - The sizes must be in Metric system. - I'm going to need the drawings of ALL parts and all assemblies, like a fabric would need to be produced. - A drawing of the final product must be made, in the same conditions as above. I still don't know how much I'm willing to pay, but since I've received offers of 80$, that will but the prize I'll give. Of course that, if someone shows me that his/her work deserves more, I'm willing to pay that extra. I'll be accepting sketches until June 23. After that date, I'll decide the winner and he/she will have until the end of the month to finish the project. Any question please contact me. Regards, Acubadazi12
Oyster Cage
I need some oyster pots. The wire mesh will be 1/2" and the sides and center support will be made out of plywood. The mesh will be plastic coated steel from Riverdale Mills (1/2" center to center). Cage will be a cylinder with a 12" radius and a length of 4 feet. There will be a 3/4" rod passing through the center. Unlike other cages, one end will open for loading and unloading the oysters. See theoysterguy.com faq pdf for an idea of what I am looking for. Also see attached picture. I have come up with one idea for closing the ends, but any other ideas will be appreciated. The parts will be cut out of 1/4" plywood and cut out on a cnc machine (shopbot). Parts will then be coated in epoxy to make them waterproof. I want ease of assembly. Notches to align wire mesh. Longitudal arms should notch into center piece and have tabs to align outer ends. There should be hole in the sides to allow for waterflow and leverage when closing and opening one end.
Lip machining for Nozzles
I wanted to develop the turn mill program for lip machining of the nozzle.