Description:An gel-filled, plastic component that is stored in a freezer and then used with a water bottle. This component will replace ice to keep drinks cold longer and also prevent melting ice from diluting users drinks. Can be either injection molded or blow molded.
Wants:* Design - whimsical and fun
File Size Limit:5 MB - 9.9 MB
- AutoCAD 2010-12 preferred
#10 Water.Bottle.Cooling.Element.01 by Zaher
Similar Contests on Cad Crowd
Portable UV Water Purifier
We are looking to design an portable water purifier with UV - C Led bulb and to make a jacket of UF tinted glass to protect the eyes / skin when the UV-C is immersed in water. IF the UV-C is not needed to be immersed in water and yet disinfects the germs and bacteria we can consider this aspect.
I have a design that in appearance is similar to a sprocket and hollow shaft. There is a need for a 3D model that can be used for rapid prototyping/molding. The final design should be in Autocad 3D and as shown in the Sketch referred to as Fig. 9. Attached are two 2D Autocad drawings of the “Support” and a “Tube”. Also attached are two scanned images Fig 1, Fig 2 and Fig 3 of the changes with instructions. Originally the Tube and Support were designed as two separate parts to be assembled together, but the new design requires that they are to be made as one “Assembly” as shown in Fig. 3. The following changes have to be made to the Tube FIG 1: The Tube has to be reduced to 2 inch long. The top portion of the tube has to be deleted. The Tube Outer Diameter has to be increased to 7/8 inch and the wall is 1/8 inch. The Tube is now placed on the support aligning the Slit This makes the Tube and Support one piece called the “Assembly” For additional information see Fig 2 and Fig 3. The 3D drawing will be used for Rapid Prototyping. 1. I would need a 3D drawing in Autocad, and possibly also in one of the following formats IGES (.igs), and/or SolidWorks (.sldprt) and/or Stl that is generally used for Rapid Prototyping. 2. I will also need the 2D drawing of the Assembly in Autocad. This design is not to be distributed or used by anyone else without prior permission from me. All items sent to you must be destroyed or returned to me. Thank you, Frank
A snorkel with an inhaler mouthpiece and a mouth mask. It also have a strap to hold it on the user's face
RKC like kettlebell design
I would like to produce kettlebell in cast iron. from range of 4KG to 48 KG. it should look like RKC, Both side flat surface, one side KG and one side LBS weight marking. Handlewidth for all kettlebell shoud be same.
Please make some Pen (tool for writing) with Innovative From you, This pen does not make with regularity sistem, It made not from plastic, so please make your pen as innovative and give me matterial suggestion