Gateway HousingBlind

Contest Ended, Winner(s) have been selected.
Description:
We are looking for a new gateway design for the IOT Professional market. The Casing design shall be eye catching and a state of art product and NOT a typical industrial look. A casing you would put in your modern living room as part of the furniture.

See attached design requirement.
Wants:
Design details, visual illustrative, estetics, manufacturing friendly.
Don't Wants:
I don't want an exact copy of the suggestion in the attached document.
Company Logo:
Yes
Software:
  1. .STP – Step 3D CAD
Additional Information
06.04.2018
ISO-, All side view + exploded view of assembly is required.

Entries

#101 Concept 2-4 by Pablo Gosso
Hi Jørgen,
Attached last update according to feedback.
Looking forward to your feedback, Pablo
more
May 4, 2018 14:53
#102 Concept 2-5 Din rail update by Pablo Gosso
Hi Jorgen,
This is the last update according to last week feedback.
Best of luck, Pablo
more
May 7, 2018 12:00
#15 Housing v1 by Milan Borovic
Please rate or comment, any feedback and suggestion is appreciated.
more
Apr 7, 2018 20:12
#18 Meshtech_IoT by unocuatro
Regards, Let me know if you like what you see to work with more detailed requirements.
more
Apr 8, 2018 22:41
#23 Meshtech_IoT by unocuatro
Hi, here you can see side views, exploded view, and basic render.
more
Apr 10, 2018 23:22
#29 Gateway - Modern Frame Style by Model to Life, PLLC
Hi Jorgen,
Please find attached the images and step file of my gateway design. I think the 2 housings should be made of Ferrex. It is a high gloss polypropylene with excellent chemical resistance and good UV resistance, so you should not need a UV stabilizer with it. It's also a third of the price of a polycarbonate. Its worst property is impact; I think it can withstand being dropped, but don't hit it hard with a hammer.
I planned to mold in the mounts for the DIN TS-35 rail. I think the slides can be pulled to the center of the part, which is reflected in the draft. I added O-rings, a gasket, and 2 screws to make it IP-65 compliant. It is setup for a simple top down assembly, just load the face part into a fixture, board, gaskets, back part, and screws. I kept the screw bosses and ribs in the rounds to hide any sink on the face of the part. The screw heads are counter sunk so they may be covered with a label, but I didn't make the label model. Please let me know if you'd like me to change anything.
Regards,
Joshua McCormick
more
Apr 11, 2018 20:22
#33 Gateway Housing by SaketCad
Hi,Meshtech,
Please go thru' attachments for details & dimensions.
Concept-1 upgraded version as per suggestions.
Please send feedback ASAP.
Rgds,
SaketCad
more
Apr 13, 2018 6:36
#35 Gateway Housing by SaketCad
Concept-2.
Please go thru' attachments for details & dimensions.
Please send us your feedback ASAP.
Rgds
SaketCad
more
Apr 13, 2018 9:16
#37 housing v4 by Milan Borovic
Please find attached design based on your suggestions.
I had to scale it down to 15mm height, otherwise it doesnt look good.
more
Apr 13, 2018 17:25
#44 Gateway Housing by Alex_Muller
Hello Dear
Please let me know if you need any further assistance and any changes.
Regards
more
Apr 15, 2018 21:40
#45 IoT GA MAZI by Thanos Ziozias - Mazi Design
The inspiration is based on meridians and parallels lines, sub-serving the global character of the IoT, standing out from other industrial equipment, creating brand awareness. The dimensions and shape are restricted from the design guides and if they change the whole project can evolve to something more unique and interesting. Any detail of the project can be adjusted according to the needs.
more
Apr 16, 2018 17:12
#46 Gateway Housing by SaketCad
Concept-3.Please go thru' attachments for details.
Send us your feedback ASAP.
Rgds,
SaketCad
more
Apr 17, 2018 6:33
#50 Black versions by Milan Borovic
Please find attached black version of each design so far plus one new design.
Regards,
Milan
more
Apr 17, 2018 14:40
#53 v 3 by arjunkhanna
as per your suggestion, hallowed the body to reduce the raw material without losing strength,also provided outlet cutout, wall clip part. in case the outlet is not in use then i can be covered up the small part in the design to give it a smooth curved surface,waiting for your feedback ,
thank you
more
Apr 18, 2018 2:11
#54 IoT GA MAZI v2 by Thanos Ziozias - Mazi Design
Please find in attachments the revised drawings for your review.
Best regards
more
Apr 18, 2018 6:09
#55 Gateway Housing by SaketCad
Concept-1 , 2 , 3 in black color + Concept-4
more
Apr 18, 2018 8:43
#73 Gateway Housing by REDA
;)
more
Apr 19, 2018 9:54
#74 IOT Gateway Housing Designs by VertuDesign
This the Follow up Designs. Thanks
more
Apr 19, 2018 10:32
#76 Meshtech GH- Concept 3-Pablo Gosso by Pablo Gosso
Hi Meshtech, Attached my last concept.
Connectors (RJ45, USB/DC, SMA) inner clearance checked.
We can modify standoff position according to your PCB design
Looking forward to your feedback, Pablo
more
Apr 19, 2018 16:47
#81 MeshTech IoT Gateway Casing by Rich Collins
Housing design submitted for your consideration. Dimensions and specifications in accordance with briefing document, designed for simple manufacture and assembly. All feedback is greatly appreciated and can be incorporated into a modified design.
more
Apr 20, 2018 0:29
#82 Third Concept of Gateway Housing by Steven INA
Hi Mestech.
This is my Third Concept.
Awaiting your feedback.
Best Steven
more
Apr 20, 2018 2:19
#83 Minimalist Housing Design Concept 4 by Steven INA
Hi Mestech.
This is my Last Concept.
Awaiting your feedback.
Best Steven
more
Apr 20, 2018 3:48
#85 meshtech by Alex_Muller
Apr 20, 2018 9:01
#94 Concept 02 by Pablo Gosso
Hi Meshtech,
Attached the information you requested on concept 2. (With some minor updates on the Din Rail system).
Looking forward to your feedback, Pablo
more
May 1, 2018 2:40
#95 Final gateway housing by DesignAssist
Additional information.
Renders show extended clips as suggested on PDF drawing
more
May 1, 2018 6:00
#96 Gateway final exploded by DesignAssist
May 1, 2018 6:38
#100 IOT Enclousure_3.0 by Sergiu.Nasta
May 4, 2018 13:17
#1 Making your logo visable and rememberable by Arhitecto
Simple, modern slick design. Put in horizontaly or verticaly how ever you want. Makes the company rememberable as long as they use it.
more
Apr 5, 2018 19:02
#2 As requested by Arhitecto
File type .STEP in attached.
Cheers
more
Apr 6, 2018 13:42
#3 4 Views of the product by Arhitecto
Apr 6, 2018 13:54
#4 Assembly isometric by Arhitecto
Apr 6, 2018 14:05
#5 Housing by SW Cad
Apr 6, 2018 21:40
#6 1 by Arhitecto
Apr 7, 2018 16:46

Discussion

Meshtech

Buyer

Tue, 08 May 2018 06:20:21 +0000
****************F I N A L L Y***************

The selection of the best design according to Meshtech requirement has been difficult and the choice between 1st and 2nd place has required a lot of discussions internally in the Meshtech contest panel.

I would therefore like to applaud and assign the 1st place to DesignAssist for his excellent work and design skills.

1st place and WINNER of the contest is DESIGN ASSIST!

2nd place goes to Pablo Gosso. Thank you for your design entries and coorperation.

3rd place goes to Gayu Falah. Thank you for your design entries.


CONGRATULATION TO ALL THREE


Best Regards
Meshtech

Meshtech

Buyer

Mon, 07 May 2018 06:37:00 +0000
Dear ALL designers which attended to our design contest.

We have now nominated the Top 3 designers which is Pablo Gosso, Gayu Falah and DesignAssist.

To all other designers thank you for attending it was a pleassure working with you.
Good luck with your other design and/or projects.

We will shortly announce the WINNER of those three.


Meshtech

REDA

Designer

Mon, 23 Apr 2018 14:23:56 +0000
Hi,
To win there is only one rule (one way) is to do better than REDA ;)

Good luck to everyone

Pablo Gosso

Designer

Mon, 23 Apr 2018 13:01:10 +0000
Thanks for the feedback Meshtech. I'm sure it is a close call. Best of luck.

Meshtech

Buyer

Mon, 23 Apr 2018 05:34:43 +0000
All Designers,

First of all thank you to everyone for your contributions to the contest !!

We are overwhelmed with all the 92 entries and from 30 different designers sent in. The contest is now finished (as per 20th of April), however we have not yet concluded on the winning design.

The entries are currently beeing reviewed and rated. Meshtech will revert in due time with more updates on the reviewing progress.

So, I will get back to you with the final decision and reward for winning design, please be patient a little longer.

Thank you

Meshtech
Fri, 20 Apr 2018 11:49:43 +0000
Hello Meshtec,

could you extend the deadline over the weekend?

Regards


vrobotics

Designer

Thu, 19 Apr 2018 07:22:38 +0000
please give your valuable feedback to my design.

DesignAssist

Designer

Mon, 16 Apr 2018 17:28:38 +0000
Hi Meshtech.
Are you going to start rating entries and provide feedback to help designers achieve a solution you like?
With a bit of interaction you will get much better entries instead of pot luck submissions.
Designers spend a lot of time and effort on each entry and even if not a winner they like to have some feedback!

Meshtech

Buyer

Thu, 12 Apr 2018 05:25:07 +0000

Tahseen Maqsood; Feel free to upload your sample. Looking forward to review.

Meshtech

Buyer

Mon, 09 Apr 2018 05:42:45 +0000
DARREN, correctly. The main concept is a gateway with no external connections. Main functions will be built-in such as bluetooth, antenna and main battery. Only marking for it. Machining for external ports will be optional if client need theese ports.
Sat, 07 Apr 2018 13:38:31 +0000
did I understand correctly that there are no external connections/Antenna, Status LED indicators (red/green), NB-IoT, LTE-M
signal to be visible trough a thinner section on the top surface? Is it a basic enclosed box?
Fri, 06 Apr 2018 15:38:22 +0000
Hmm. interesting contest. I will participate.
Fri, 06 Apr 2018 13:25:17 +0000
is a very good prize, and will have great entries.
You could have partitioned a portion of that value to add the second and third place.

In my opinion, when you have more chances of winners it ends up stimulating more the challenge.
Fri, 06 Apr 2018 06:17:20 +0000
hi! thanks for these contest! I´m in!;D

Meshtech

Buyer

Fri, 06 Apr 2018 05:13:46 +0000
1. ARJUNKHANNA, Details of circuit borad (PCB) is not designed yet. And is not applicable for this task.
2. DARREN, Please read the attached document. Table og wall mounting.
3. Please read the attached document.
4. DARREN, No limit for production cost at this stage.
5. SUMMIT, reade the attached document.

Its ONLY the exterior of the casing that is relevent for this design contest.

arjunkhanna

Designer

Fri, 06 Apr 2018 04:25:48 +0000
plz provide design detail of circuit board for designing ext outlets..
Thu, 05 Apr 2018 23:39:43 +0000
where will the product be mounted?
Thu, 05 Apr 2018 23:38:19 +0000
do you have a limit on production costs for the casing? Can you provide products which reflect the type of mood you are looking for and materials?
Thu, 05 Apr 2018 19:24:24 +0000
How are you planning to manufacture it ?
if its 3d printing then some more attractive designs can be done

Similar Contests on Cad Crowd

3-wheel Portable Scooter
I am impressed with results of the previous kick scooter challenge and invite all to a similar contest. Want: • A convenient and appealing form of local transportation for adults • Artistic renderings of concept and drawings of your final rendering • May communicate more wants during contest to aid overall direction and to keep opportunity available to all Contest is for 3-wheeled scooter designs (2-front, 1 rear - steering can be with either front wheels or rear wheel) Main Competitors: https://www.cycleboard.com/ http://muv-e.com/ http://www.mercanewheels.com/project-1
Skateboard Rubber Wheel Stoppers
Looking for help with a redesign for skateboard wheel stoppers. These skateboard wheel stoppers prevent the wheels on the skateboard from rolling when practicing tricks. These are rubber pieces that can be slipped on skateboard wheels to stop them from rolling while learning ollies, kickflips and other skateboarding tricks. More information about it can be found here: http://www.skatertrainer.com
Vehicular LED Display Case
I am prototyping a display for a startup that will be mounted on the tops of vehicles. It will eventually be either CNC milled or 3D printed, depending on the material decided on. For this display I am looking for a sleek case design that also meets the specifications below. The display panel itself is 81.75625 cm x 15.24 cm and needs to be able to slide into and out of the case when a side panel is removed. The electronics are mounted on the back of the display panel and require a clearance of 5.08 cm. There needs to be a source of ventilation for the electronics except on the top as it will be outdoors, as well as one usb port and space for the power cable on the bottom of the display case. For the feet, they will be made of magnets with quite a strong pull force that have been dipped in rubber to prevent scratching. This also needs to be accounted for in the design with there being 3 to 4 feet supporting the case. There are other cases for various products that need to be designed/redesigned, so we would like to find somebody to work with through this contest.
Kettlebell designs
We are after 7 different style and shape for the front of the kettlebells, back to be round and smooth, flat bottom, 8,12,16,20,24,28,32kg. 1 demon, 2 skulls, 2 scary clowns,1 Japanese demons and a hand grenade. We will attach pictures for reference and ideas. Please do not hesitate to contact us for more info or details.
Air Filter Duct Covers
There are 12",14",16",18",20",24"and 25" replaceable air filters. Object to seal openings in ducts around replacable air filters.