in 3D Printing Design held by GuyV
Contest Ended, Winner(s) have been selected.
Looking to create a 3d model of a pendant. The pendant should look like a sphere with holes similar to the ones on the ring in the attached file
Additional Information
The diameter of the sphere is about 0.5". The material will be metal.


1st Winner
#28 Pendant Sphere with Ring by Straightedge
This is the pendant sphere with a ring scaled up to 1". Please contact me if you have any questions or comments. Thank you.
Jan 15, 2018 23:16
2nd Winner
#15 Pendant 1 by Mecanikad
Hi. Please check my drawing. The pendant is scaled to 0.5" diameter and about 0.8mm thickness.
Jan 13, 2018 12:52
#13 PenHexgon Style Pendent by Anim
I observed your ring, with a pattern repeated in a specific form. That gave me a pentagon and hexagon style sequence. This is an exact form I'm sure you are looking for.
Also the hook is give the same shape with one bigger and other small hole.
Please ask anything if you want to know further. I gave shades like, matt and glossy effects in Pink, silver and golden.
-- I'm sorry This is my first entry So accidentally uploaded image instead of project file. And then added as additional software.
Jan 13, 2018 8:12
#10 Pendant Sphere Gold by Straightedge
This is the pendant sphere rendered in gold. Please contact me if you have any questions or comments. Thank you.
Jan 13, 2018 3:13
#1 Medalion by Arhitecto
Jan 12, 2018 20:37
#2 desgin by tsuen
Hope you like the design,if you have any suggestion of design please let me know.
Jan 12, 2018 20:51
#3 3d by tsuen
Hope you like the design,if you have any suggestion of design please let me know.
Jan 12, 2018 20:53
#4 Sphere-Pendant by Cre83D
Jan 12, 2018 22:02
#5 Sphere-Pendant by Cre83D
Jan 12, 2018 22:07
#6 Sphere-Pendant by Cre83D
Jan 12, 2018 22:07
#7 Golden Ball by Thong Van Nguyen
How do you think ? Please look and we can discuss in advance
Jan 13, 2018 0:02
#8 MPV1 by jaburn
One sphere with holes in it.
Jan 13, 2018 0:27
#9 Pendant Sphere Silver by Straightedge
This is the pendant sphere rendered in silver. Please contact me if you have any questions or comments. Thank you.
Jan 13, 2018 3:02
#11 pendant by Perla
Jan 13, 2018 7:25
#12 0.5in metal pendant by Perla
Jan 13, 2018 7:30
#14 PENDANT by Perla
Rose gold color, also included black and metal color in files. .IGES file after announcing winner.
Jan 13, 2018 8:49
#17 PENDANT by shailu018
Spherical pendant of diameter 0.5" with required designs and wooden texture on the sphere.Also a hook is also attached.
Hope you like it. Please rate!!
Jan 14, 2018 6:32
#18 Concept 5.0 by Lee Charles Laing
1/2" Diameter Sphere Pendant...Shown in Polished Gold Material
Jan 14, 2018 10:27
#19 Pendant 123 by Mecanikad
Hi here are 2 different versions vs previous with same lighting
Jan 14, 2018 17:21
#20 Pendant by sherifelsheikh
Jan 14, 2018 21:34
#21 Pendant by MarkingProject
I attached the STL of the pendant as well as a Solid Edge .par file. The material are silver and gold.
This is my first work here, and I am looking forward to your rating.
Best regards.
Jan 14, 2018 22:12
#22 GUS_Pendant-01 by Claudio Gussini
Jan 15, 2018 0:05
#23 GUS_Pendant-01 by Claudio Gussini
Jan 15, 2018 0:16
#24 Sphere Pendant by Stella X
I have added an interlocking hook so the sphere can rotate. File can be modified. Any suggestions welcome.
Jan 15, 2018 5:11
#26 Pendant by MarkingProject
Hi GuyV! I made some modifications to improve the design. Now it has holes more similar to the ones on the ring.
Hope you like it!
Best regards.
Jan 15, 2018 12:16
#27 Pendant by Mahbub
Pendant design....
Jan 15, 2018 16:15
#29 Pendant Sphere with Ring STL by Straightedge
This is my latest pendant sphere in stl format. Let me know if you need anything else.
Jan 16, 2018 20:00
#30 Pendant Sphere with Ring, 3 STLs by Straightedge
This upload of the pendant sphere has three different stl files. Each exported with a finer and finer tessellation resulting in a smoother and smoother surface, but with larger file sizes.
Jan 17, 2018 1:28


Sat, 13 Jan 2018 07:43:47 +0000
does it have to be specifically spherical?

Thong Van Nguyen


Fri, 12 Jan 2018 23:40:16 +0000
Hi , it is great chance. could you show detail of project rough information ( hand sketch, dimension, material ) and what is file that you ? what is manufacturing process that you want to make it..etc..I am looking forward from you.

Claudio Gussini


Fri, 12 Jan 2018 19:17:55 +0000
Hello, nice challenge indeed ;)
Could you let me know something about dimensions ?
Thanks :)

Similar Contests on Cad Crowd

3D printable mount to turn 'tiny whoop' drone parts (+paper) into a remote control paper airplane with FPV
I would like to remix 5 'things' on 'thingverse'. The core 'thing' that inspired the project is this paper airplane motor mount created by Peter Sripol: This video describes how it works: But, I’m using different drone parts, and adding a camera. Full details are provided in the attached PDF. The reason for remixing five 'things' is that means the hard work of sizing the 3d-printed parts to match the electronics has been done for us. Note that I do not need a CAD file, just a 3d-printable .stl file. Note that I'm asking for three versions.
3D Fuel's Company Mascot - Chameleon
3D Fuel is a 3D printer filament manufacturing company. Our mascot is the panther chameleon! We are looking for a cartoon looking chameleon that we can print without supports in a single print. If we must have supports the less supports the better. We don't want people who print this to have to "clean it up" too much. This is something that we would like to bring to trade shows and post on our website with our different color filament. We want this mascot to be an icon! When people see this chameleon they will know what company it belongs to.
3D Printing Model
Bottled Water, Screw Device
Modular 5-chip gridseed miner enclosure
The 5-chip gridseed minder is a computing device that attempts to discover large complex hashes that meet the criteria for various digital currencies (such as LiteCoin). The miners are designed to work together in groups of 10-20. The goal of this contest is to design a modular mounting solution for each miner, that will (1) allow the miners to be easily joined together in a single structure, (2) permit future expansion by adding new modules, (3) protect the delicate heatsinks, (4) provide for efficient, aesthetic and safe routing of cables, and (5) provides for a power distribution bus that cannot be accidentally touched (safe). See criteria below. Solutions may involve multiple parts/prints. DETAILED MINER DIMENSIONS AND DESCRIPTION: Each miner is basically a cylinder consisting of a: (1) a round heatsink (95mm diameter, 45mm height) on the bottom, and (2) a round fan on the top (95mm diameter at the widest point of the rims, 25mm height). For one mounting possibility, there is a 14mm wide indentation (2mm deep), around the circumference of the fan. The lower rim of the fan (before the indented area) is 4mm in height, and the top rim (before the indented area) is 1mm in height. There is a small slope (bevel) from each of the upper and lower rims to the indented area (note that I did not include the beveled area in the measurement of the 14mm width of the indentation). The fan is secured to the heatsink with four triangular mounting tabs that protrude 8mm (at the longest measured from the edge of the rim to the point of the triangle). Each "side" of the triangular mounting tab is 14mm in length. The angle between the legs of the mounting tabs is 90 degrees. Viewed from the top, therefore, the mounting tabs form the corners of an 80mm x 80mm square superimposed on the otherwise circular shape of the 95mm fan. Each miner requires two connections - a power wire and a USB wire. These connections are located together (about 45mm apart) on one side of the heatsink below one of the mounting tabs.
Bespoke 3D printed Sunglasses
We are ready to make Bespoke consumer level 3D printed sunglasses a reality. The company has a Lens Kit that these frames will be designed specifically for so attention to detail is key. The STL files for with the lens dimensions are attached. We have more designs to come so the chosen designer will have ongoing work. WE REQUIRE THE FOLLOWING 2D to 3D CAD 3D- Printing Expert Solidworks STL print ready File