TYP tracker

in 3D Modeling Design held by vikkyify
Contest Ended, Winner(s) have been selected.
Description:
This is a simple wrist wearable fitness tracking device.
Here are the features/specifications:

Wrist band length- Adjustable between 150mm and 200 mm.
Screen and sensor: 60mm x 20mm x 10mm
Bluetooth enabled
Smart alarm
Daily step and daily distance calculator.
USB charger.
45mAh lithium polymer battery
How the device will work:
This device will connect via Bluetooth to the accompanying app where the user can set their daily targets (steps). As the target is met, the device simply vibrates and LED color changes.
Wants:
An attractive creative design that explores both functionality and brand identity(see logo attached).
I just need a fresh concept that will look different from those in the market currently.
Software:
  1. up to designer

Entries

1st Winner
#9 Fitness Watch by ;lzsvpja-] bja]=
Jan 5, 2017 16:24
#3 TYP by Adam
Jan 3, 2017 18:00
#4 TYP tracker by REDA
Thanks to rates ! ;)
more
Jan 3, 2017 20:55
#6 TYP TRACKER REV1 by Michael Dimou
Jan 4, 2017 18:21
#7 TYP TRACKER REV2 by Michael Dimou
Jan 4, 2017 19:00
#5 Yolotrack by alexanderPRJ
Function buttons inspired by logo design.
more
Jan 3, 2017 22:13
#10 TYP Tracker #1 by Aminegn
Hello,
I hope you enjoy the design.
more
Jan 5, 2017 18:42
#1 YOLO Band by ODBDesign
Basic concept for you here. If you would like changes or refinements please up the contest amount or I can work with you one to one. Thanks
more
Jan 3, 2017 11:50
#2 YOLO Band by ODBDesign
Uses a compression fit with padded rubber lining for comfort and non slip
more
Jan 3, 2017 17:12
#8 TYC tracking device by Alexandru Bardinici
Here is my first version of tracking device. Let me know if it okay or you need something else.
more
Jan 4, 2017 21:19

Discussion

edward m barnes

Designer

Thu, 05 Jan 2017 22:42:40 +0000
Could you rating my design

REDA

Designer

Wed, 04 Jan 2017 15:07:10 +0000
??

vikkyify

Buyer

Wed, 04 Jan 2017 12:54:20 +0000
Hi Kaputjan, A micro USB is actually what I meant. Thanks.
Wed, 04 Jan 2017 12:39:40 +0000
Hello. For my experience in electric/electronic devices, by the size of your wrist device, an USB standard charger is too big.
I would rather choice a Micro B plug. Which also can transfer data.
Tell me if this cause you troubles.

ODBDesign

Designer

Tue, 03 Jan 2017 12:04:20 +0000
Agreed no offence meant but please see the past projects such as the 'kick scooter' or the current 'setra nano', if you want a high quality concept and lots of designs to choose from you might want to think about increasing the prize pot.

;lzsvpja-] bja]=

Designer

Tue, 03 Jan 2017 03:30:26 +0000
Not enough money ..I'll pass

Similar Contests on Cad Crowd

Total Winner!!!! - Best Tabletop - Super Ellipse (in the manner of Piet Hein) with Beveled Edge
DXF CAD Drawing of a Super Ellipse shaped tabletop with the end goal being a version of Eero Saarinen's Iconic 60' Tulip Table (picture of tulip table attached below. As far as I know, Saarinen's table was only fabricated with oval and round tops. The Super Ellipse shape works best in the setting I am designing). The tabletop will be fabricated out of a 1.25" man-made composite, marble-like, material called Silestone. (If it helps you envision the end result, the material is Silestone "Zeus White Extreme" in matte white). The dimensions of the table top should be: 56" long x 36" wide. (and will be attached to a metal pedestal base). The underside of the table top should have a 1.25" bevel from the outer edge of the table top towards the center of the table top.
Intricate Wings Design
- Small wings design based on a 2D picture provided - Each wing to be separate with a little loop at the top so as to have a necklace looped through the top - Must be able to be 3D printed - Jewellery will be made from a white metal which will be 3D printed (by Shapeways.com) - Design end product must have the layers so as to depict the image as set out by the 2D file provided
UAV designs
I am looking for a design on an unmanned aircraft which will have a flight time of over 1hr. It must be able to carry a weight of 7kg and a camera. I know there are loads of uav's on the market so if someone can come up with the 3D plans that then can be made to a working model. I am looking along similar lines as the scan eagle etc. The best design may possibly lead to a private agreement to design a helicopter also.
Choice FM Studio Furniture
I am building a radio station studio and need a design for the main console. I need a design for the carpenter to work from. I can provide information as to what my needs are. I also have the layout of the building the console will be housed in. Please send questions.
Street Elbow Mod.
I would like to know if you would be interested in creating a 3D model for the attached print/sketch? If so, please let me know cost and lead time . I would like to have .STEP and cad file. outside radii are not critical so just need to be close to what is shown. Schedule 40 PVC. Thank you, Ben Neal