Skateboard Rubber Wheel StoppersBlind
in
Product Design
held by
Commcap
Last seen:
Contest Closed
-
Open
-
Choosing Finalist
-
Ended
Description:
Looking for help with a redesign for skateboard wheel stoppers. These skateboard wheel stoppers prevent the wheels on the skateboard from rolling when practicing tricks. These are rubber pieces that can be slipped on skateboard wheels to stop them from rolling while learning ollies, kickflips and other skateboarding tricks. More information about it can be found here: www.skatertrainer.com
Wants:
What We Are Looking to Get Done: We are looking for a redesign of the current version. We would like something similar to the current version, where the dimensions are similar, just we would mostly like a different design/apperance of it. We are open to a variety of designs or suggestions.
We need something that basically does the same thing as the current version where it prevents skateboard wheels from rolling when practicing tricks. We need a design that will prevent the rubber wheel stopper from slipping off when users practice tricks with the product.
Software:
- AutoCAD
- SolidWorks
- Autodesk Fusion 360
Payment PendingEntries
#33 Skateboard Rubber Wheel Stoppers
by edward m barnes
Hidden design
Download Files
- Autodesk Inventor 2017 — Skateboard Rubber Wheel Stoppers
- Autodesk Inventor 2017 — Skateboard Rubber Wheel Stoppers -green
- Autodesk Inventor 2017 — Skateboard Rubber Wheel Stoppers -red
- Autodesk Inventor 2017 — Skateboard Rubber Wheel Stoppers-blue
- Autodesk Inventor 2017 — Skateboard Rubber Wheel Stoppers-pink
Oct 25, 2016 14:22
#6 Skateboard Wheel Stopper - Ver. 2.0
by Huszak_Marcell
Hidden design
Download Files
Oct 22, 2016 22:01
#4 Skateboard Rubber Wheel Stoppers rev1
by Michael Dimou
Hidden design
Download Files
Oct 22, 2016 15:30
Discussion
Showing last 20 comments - View All
@commcap, any news yet?
The tab has changed from "choosing a winner" to "ended" . So has this ended without a winner? The buyer hasn't been active since the 9th Nov ! Apologies if you are just taking your time.
hey cadgeek- everyone here is well aware that this wasn't a prepaid/guaranteed contest, but we all submitted designs anyways. I wouldn't jump to conclusions so fast thinking the buyer has plans to rip off your design. He said he plans to look over the designs over the next few weeks and then decide. And I wouldn't worry to much because under 'payment pending' contests, the buyer can not view the files of the design, they can only see the image. There are many design concepts that look great, but in reality they can not easily be manufactured.
You also need to look at it from the perspective of the buyer as it might be their first time using this platform and they are not sure what to expect from this site. Maybe they are hesitant to kickoff a prepaid project contest and forced to pick a wininning design that they might not like. As a designer we need to be patient and courtesy with potential clients because who knows it could turn out to be a long term working relationship where they have future projects for the designer to do. Your frustration should be with the Cadcrowd platform. That's the problem with many of these design contest sites, it leaves many designers out to dry. If you don't like it then leave the platform and stick with the freelancer sites.
You also need to look at it from the perspective of the buyer as it might be their first time using this platform and they are not sure what to expect from this site. Maybe they are hesitant to kickoff a prepaid project contest and forced to pick a wininning design that they might not like. As a designer we need to be patient and courtesy with potential clients because who knows it could turn out to be a long term working relationship where they have future projects for the designer to do. Your frustration should be with the Cadcrowd platform. That's the problem with many of these design contest sites, it leaves many designers out to dry. If you don't like it then leave the platform and stick with the freelancer sites.
(To Buyer) Is there an estimated time you can give as to when you'll provide an answer?
so how won ?
If your current design works fine then why are you hosting a contest? You want to talk professionalism you now have wasted 60 or 70 professional cad designer valuable time. I don't think you understand how expensive our time is. You hosted a contest and received more than adequate entries and left us out to dry. "Very Professional"
Prove me wrong then. Pay some money and pick a design.
Like I care. There's no money aways (Payment Pending) I have more than enough work on my plate. My work speaks for itself.
@Cad Geek - thank you for showing such excellent professionalism. Your quick accusation that I plan on stealing and using your design is way off. No need to worry, I would never do that. Why would I risk doing that when my current design works just fine. You have shown to me that you would not be a good designer to work with and therefore I will not consider you.
(For the Buyer) If I see any of my concept designs for this contest being manufactured, I will sue you. Payment Pending is a joke all it does is give the contest host/ buyer an opportunity to steal our designs. I urge all the designers on here to boycott any payment pending contest for here on out.
Thank you everyone for your design submissions! Many creative designs were submitted. Over the next few weeks I'll try to take a look at all the designs and then choose.
@Karan_S_Pannu - thank you, I'll take a look
I hope that the contest would have lasted for more 3-4 hours
As my server was down
Everything was ready
Just uploading of content was left.☹
You can check the design in my portfolio that I'll be uploading in my portfolio in the next few days. Pls comment if anything is needed to be changed.
Hope the best one wins.
Best of luck guys?
As my server was down
Everything was ready
Just uploading of content was left.☹
You can check the design in my portfolio that I'll be uploading in my portfolio in the next few days. Pls comment if anything is needed to be changed.
Hope the best one wins.
Best of luck guys?
For design # 96 the Rubber Wheel Stoppers is designed so that when the zipper is opened, the rubber is completely flat.
when the zipper opens this is separated into two parts and the rubber is flat
when the zipper opens this is separated into two parts and the rubber is flat
You can check my renderings for 
https://www.cadcrowd.com/gallery/project/skateboard-rubber-for-training
https://www.cadcrowd.com/gallery/project/skateboard-rubber-for-training
hello, Redouan Elmirou
Your doubt is genuine. But there is nothing written in description that there would be only injection molding done on the product. The buyer can choose any design and can make a basic design by injection molding, and then after, he can opt for skilled workers for detailing. And yes no doubt that the more is the detailing, the more it will become costlier for the buyer to generate the final product.
:)
Your doubt is genuine. But there is nothing written in description that there would be only injection molding done on the product. The buyer can choose any design and can make a basic design by injection molding, and then after, he can opt for skilled workers for detailing. And yes no doubt that the more is the detailing, the more it will become costlier for the buyer to generate the final product.
:)
hello, Redouan Elmirou
Your doubt is genuine. But there is nothing written in description that there would be only injection molding done on the product. The buyer can choose any design and can make a basic design by injection molding, and then after, he can opt for skilled workers for detailing. And yes no doubt that the more is the detailing, the more it will become costlier for the buyer to generate the final product.
:)
Your doubt is genuine. But there is nothing written in description that there would be only injection molding done on the product. The buyer can choose any design and can make a basic design by injection molding, and then after, he can opt for skilled workers for detailing. And yes no doubt that the more is the detailing, the more it will become costlier for the buyer to generate the final product.
:)
First of all I'm not trying to insult anyone I'm just thinking in the best interest of both parties(buyer and designers).
PLEASE be careful choosing a design because a lot of the designs above simply cannot be produced! And if you take one of these designs to a injection moulder he's going to send you back home to redesign the whole thing.. I highly doubt some of these people have any knowledge on how to design a product for injection molding..
some things to look at:
1. Adding texture on the inside of the product is going to give problems when the product is exiting the mold.
2. A straight surface (no release angle) is NEVER coming out of the mold undamaged.
3. Simply think about how the product wil exit the mold.. the mold should be 2 parts.. some products simply cannot get out of the mold..
As for your current design.. I'm with jessebrown131313 on this. The design looks good and is designed for its manufacturing method. Although I am willing to think about USEFUL designs and I might upload something somewhere in the next few days or you can also contact me personally if you're interested.
Regards
PLEASE be careful choosing a design because a lot of the designs above simply cannot be produced! And if you take one of these designs to a injection moulder he's going to send you back home to redesign the whole thing.. I highly doubt some of these people have any knowledge on how to design a product for injection molding..
some things to look at:
1. Adding texture on the inside of the product is going to give problems when the product is exiting the mold.
2. A straight surface (no release angle) is NEVER coming out of the mold undamaged.
3. Simply think about how the product wil exit the mold.. the mold should be 2 parts.. some products simply cannot get out of the mold..
As for your current design.. I'm with jessebrown131313 on this. The design looks good and is designed for its manufacturing method. Although I am willing to think about USEFUL designs and I might upload something somewhere in the next few days or you can also contact me personally if you're interested.
Regards
Hi @Commcap,
The design i submitted contain those parts in both sides , this can help young kids with less strength to easily slip this rubber on over wheels.
The design i submitted contain those parts in both sides , this can help young kids with less strength to easily slip this rubber on over wheels.
@ Mark M - The current version is a stretchable rubber. I'm not sure what the durometer of it is, but it is softer than the skatboard wheel.
Similar Contests on Cad Crowd
3-wheel Portable Scooter
I am impressed with results of the previous kick scooter challenge and invite all to a similar contest.
Want:
• A convenient and appealing form of local transportation for adults
• Artistic renderings of concept and drawings of your final rendering
• May communicate more wants during contest to aid overall direction and to keep opportunity available to all
Contest is for 3-wheeled scooter designs (2-front, 1 rear - steering can be with either front wheels or rear wheel)
Main Competitors:
https://www.cycleboard.com/
http://muv-e.com/
http://www.mercanewheels.com/project-1
Vehicular LED Display Case
I am prototyping a display for a startup that will be mounted on the tops of vehicles. It will eventually be either CNC milled or 3D printed, depending on the material decided on. For this display I am looking for a sleek case design that also meets the specifications below.
The display panel itself is 81.75625 cm x 15.24 cm and needs to be able to slide into and out of the case when a side panel is removed. The electronics are mounted on the back of the display panel and require a clearance of 5.08 cm. There needs to be a source of ventilation for the electronics except on the top as it will be outdoors, as well as one usb port and space for the power cable on the bottom of the display case. For the feet, they will be made of magnets with quite a strong pull force that have been dipped in rubber to prevent scratching. This also needs to be accounted for in the design with there being 3 to 4 feet supporting the case.
There are other cases for various products that need to be designed/redesigned, so we would like to find somebody to work with through this contest.
Base / Rail / Connector design
We are in the process of designing a product line consisting of various 12Volt accessories which can be mounted on a stand-alone Base or on a Rail.
Deliverables:
- Design of the Base
- Design of the Rail (+ Various connectors)
- Design of the Mechanism that connects the Accessory to the Base/Rail
- The design must be production ready
- The design must be as simple and sturdy as possible yet the look and feel should be modern, high(top)-end and minimalist
Calling all pet product designers for a new innovative dog feeding board.
Calling all pet designers, help me make the dog bowl great again!!
Small start-up company looking to disrupt the dog feeding bowl market. When you have a dog, you want to do all you can for it. There are a variety of boredom buster feeder dog products/bowls on the market that helps solve the problem of alleviating boredom and anxiety that can lead to excessive chewing, barking, digging, and other destructive behaviours.
I want to disrupt the dog feeder product market competitors to create something new, original and innovative integrating the Wobble Balance Board concept.
Please read the attached brief for more details on the scope of work and if you have any questions please let me know.
Wants:
• Open to multiple designs/entries
• 3 unique product designs plus 2 wild card designs
• Innovative, creative and original design – out of the box thinking
• Cost effective and designed to manufacture
• Injection mould friendly using food grade rubber and plastic materials to manufacture
• 3 sizes-small, medium and large
• Sturdy and non-slip when in use
• Is it relatively unique versus what competitors sell and most people have come across on eBay, Amazon or similar online shops and current product competitors?
• Minimalist and simple
• Must help us modify if needed
• Use logo attached
The critical point is to positively make it an engaging experience for the dog – the end consumer. The other challenge is to convince the dog parents of the benefits/features by design and usability of it.
Open your imagination and professional creative ability – design something original and innovative.
If you think we're not being creative enough and have an innovative idea for an awesome design that fits the brief, please also submit. There are multiple prizes on offer.
3D Advertising Pylon with Smart Trash & Recycle Bin
We need Advertising Pylon (LED Screen / Poster) with Smart Trash & Recycle Bin.
We are looking for aesthetic & ornamental design.
We need advertising Pylon have Base + Advertising Space (LED Screen / Poster) + Title Space + Crown.
We would like to see Crown design should be more elegant, aesthetic look & ornamental design.
We prefer little Contemporary Islamic design for the Crown. Any other suggestions also welcome.
We need space for Logo & Text (Gold Material) on the top of Pylon, below the Crown.
Advertising Space could be Flat or Curved LED Screen / Poster design.
Top of Recycle Bin space utilize for Advertising Purpose.
Attached images for your reference for 3D Pylon – LED Screen with Smart Trash & Recycle Bin.
Redouan Elmirou
Designer