Mechanical Block Grab
in
3D Modeling Design
held by
dreamcast
Last seen:
Contest Closed
-
Open
-
Choosing Finalist
-
Ended
Description:
I badly need a design for a mechanical block grab as in this link:www.kmplant.com/productimages/prod0118_1.jpg
and also see this video below:
www.youtube.com/watch
I need it with the lock mechanism that can lock and release mechanically, a rachet lock
Wants:
A mechanically functional lock, design to lift SWL 2000kg, dimensions as given in this link for model# MC/BO/BG-01:
www.mantiscranes.co.uk/wp-content/uploads/2015/06/block-grab-specs.jpg
Software:
- Autodesk Inventor
Entries
#12 Block grabber with functional lock
by MR. CAD DESIGNS
#11 MECHANICAL SCISSOR GRAB WITH LOCK/ UNLOCK MECHANISM
by Fercas
Download Files
#10 Mechanical Block Grab
by Aminegn
Download Files
#9 final lock assembly
by MR. CAD DESIGNS
Download Files
#8 mechanical grabber
by MR. CAD DESIGNS
#7 mechanical grabber
by MR. CAD DESIGNS
#6 Mechanical Block Grab
by Aminegn
Download Files
#5 Mechanical grab with ratchet
by Saurav
Download Files
#4 Mechanical grab with ratchet
by Saurav
Download Files
#3 MECHANICAL SCISSOR GRAB
by Fercas
Download Files
#2 Mechanical Block Grab Assembly
by NewDev Technologies, LLC
#1 Mechanical Block Grab
by Aminegn
Download Files
Discussion
Showing last 20 comments - View All
hello dreamcast sir
i am going to submit the animated explanation of the functional mechanical lock by this monday.
and how much time after the submission of explanation video, is the prize money going to be awarded?
thanks
i am going to submit the animated explanation of the functional mechanical lock by this monday.
and how much time after the submission of explanation video, is the prize money going to be awarded?
thanks
I had uploaded a video, more detail and adjustment needed and if selected I will do the rest of the modifications needed until satisfied all the requirements
Hi dreamcast sir,
if you need an animated video of fully functional ratchet lock mechanism, it will take a longer time. but for now i have submitted the mechanical grabber with mechanically functional ratchet locks 3d model and drawing files
if you need an animated video of fully functional ratchet lock mechanism, it will take a longer time. but for now i have submitted the mechanical grabber with mechanically functional ratchet locks 3d model and drawing files
come on my design from the first was with the most look alike whitht the hook the mechanism. the only thing i cant nott figure out was how was assembled part of the ratchet mechanism. but with all that feedback im shure that @ms12shah will do the work. with that last picture http://www.brianscottengineering.co.uk/images/Attachment/Block%20Grabs/block-grab-main-04.jpg
it will be very easy to understand and model it.
anyway congrats to the winner!
it will be very easy to understand and model it.
anyway congrats to the winner!
m12shah, please understand that i do not need photocopy of the design that was shown in the link's picture. I need a rachet lock that should work mechanically because i need to fabricate this physically and if it doesnt work then it is a failure for me and my time will be wasted. Kindly submit an animation of the working racket lock with a gear incorporated
ok , i got it, the hook is part of that locking mechanism. my next design will integrate all things together.
and thanks for this reference
thanks
and thanks for this reference
thanks
ms12shah, that isnt a lock, its is hook and please view the video link provided in the project description.
ALSO ALL OF YOU SEE THIS LINK: http://www.brianscottengineering.co.uk/images/Attachment/Block%20Grabs/block-grab-main-04.jpg
and notice the lock mechanism.
Saurav, i asked rachet, not pin and cam design
ALSO ALL OF YOU SEE THIS LINK: http://www.brianscottengineering.co.uk/images/Attachment/Block%20Grabs/block-grab-main-04.jpg
and notice the lock mechanism.
Saurav, i asked rachet, not pin and cam design
looking forward for my award(Prize money)
Thanks
Thanks
By mistake golden is written as blue in my submission. ignore that, and suggest if you need any more changes
Thanks dreamcast,
But why the lock is not acceptable,this type of lock is a simpler form of ratchet is widely available in market.I just fabricated it with simplycity.
However never mind.
Thanks again.
But why the lock is not acceptable,this type of lock is a simpler form of ratchet is widely available in market.I just fabricated it with simplycity.
However never mind.
Thanks again.
so sir can give me some link or references so that i can integrate the type of lock you want, into it
Actually sir time was too less to understand the mechanism and integrate it into the model, that,s why i did not do it. if you need i can integrate it into design now.
thanks
thanks
Thankyou everyone,
I have reviewed the enteries and the most nearest possible design is by m12shah but there is no lock details or renders, i kindly request that.
Good Job by fercas, still no lock detail
Good attempt by saurav although this type of lock is not acceptable.
I have reviewed the enteries and the most nearest possible design is by m12shah but there is no lock details or renders, i kindly request that.
Good Job by fercas, still no lock detail
Good attempt by saurav although this type of lock is not acceptable.
Hi, i am going to submit the design and the drafted drawings 10 hours later(a bit busy now), please check them and suggest any rectifications required
thanks
thanks
Hello
Could you extend the contest an additional 3 days? please
Thank you
Could you extend the contest an additional 3 days? please
Thank you
Hello, im startying with cadcrowd but i have A LOT experiene in mechanical and machine Design for this kind of aplicattion. i can do the work, and include all the FABRICATION DRAWING with all the specifications needed, unfortunatly due to my currently workload i can not will start it until 16 sept 2016 (today 14 sept 2016). the work will be done in 1 day of work. but i will not do the Fabrication Drawing until have presented the 3D concept and had your approval so this waywe do not inves too much time in previous drawings. if you agree in all of this ill start with te concept as soon i can on 16 sep 2013
Equipment should all be in steel
Hi! I can help you with this work. I'm working in Inventor 2014. If my proposition interested for you, I ready to discuss all moments.
Sir, Is there any material requirement for that machine?
Yes you may but submit shop/fabrication drawings with it
Similar Contests on Cad Crowd
Cat Earred Headphones
We want a set of headphones designed that have cute cat ears designed on the top of the headphones. The mockup that we will include uses Beats Solo HD headphones as the template. This an easy way for us to portray the aim of the project, as we want the final outcome to look sleek and simple, but not exactly like Beats. We want a redesigned set of headphones that has fashionable cat ears on top suitable for young 20 year old females. Make 2D mock ups to give us an idea of what you have designed, then also to make up plans that can be sent to manufactures for immediate production, preferably in a cad format that can be used to 3D print the shell. Color, style, aesthetics are all up to designer, but general preferred color themes will be for white to pair with pink, and baby blue to pair with very light red.
MuTT MoTE™ and MeOw MoTe™
Very simple stackable design for a pet feeder with the food in the middle and a mote of water around it. Center should be high enough to keep food dry and surrounding water mote area should be large and deep enough to hold enough water for the pet to drink.
Agriculture drone
Looking for someone to design an agriculture drone using the ANSYS system the drone will have to look like the Jetson one except the top of the cab will not be in the design and the rest of the frame closely resembling the Jetson one. There will not be a seat or manual controls in the lower half there will be a tank that’s custom shaped to fit in place of it.
Flying Currency
Hi there, I have a very simple project. I need to produce still photos of flying currency. I will provide flat photos of currency and I need them mapped to models of bills fluttering in the wind. I need about 15 TIFFS produced in high res. You would have to model very simple forms, add the currency/money texture then render.
yassine mouttahar
I have greate experience in 3ds max and marvelous designer (vray) and 3D designing either modelling or texturing also rendering high quality realistic rendus . I have 7 years of eperience in architectural cabinets
WATCH MY PORTFOLIO
MR. CAD DESIGNS
Designer