MuTT MoTE™ and MeOw MoTe™
in
3D Modeling Design
held by
InventorsCorp
Last seen:
2014-11-30 00:14:43
Contest Closed
Description:
Very simple stackable design for a pet feeder with the food in the middle and a mote of water around it. Center should be high enough to keep food dry and surrounding water mote area should be large and deep enough to hold enough water for the pet to drink.
Wants:
3 sizes for dogs the small, medium, large the small size can also be for cats Just think mass production and let your imagination flow. Must Be Stackable!SLT or equivalent File for 3D Printed Prototypes
Don't Wants:
something to crazy Must be a producible product.
Ask for Sample:
Yes Please... The winner will also receive a 5% royalty
Software:
- AutoCAD
- Autodesk Inventor
Entries
#29 MEOW MOTE - POOL PAW DESIGN
by RLonardo
I decided to go with a unique shaped paw design. The water mote is sloped towards the "toes" of the bowl so that the water always will be accessible from the widest part of the bowl. The food is centered in the pad of the paw and sits above the water. All aspects of this design are easily scaled, so if you like the design but not the proportions just ask. From the section provided, you can also see that the design is stackable.
Nov 12, 2014 2:20
Discussion
Showing last 20 comments - View All
so who's the winner? :D
ZULFA IS A winner for me ..................................
Hi Troy,
Which monday are you mentioning
Which monday are you mentioning
I will be choosing the winners on Monday you guys have sure well over exceeded my expectations and made this very hard decision.... you are all winners in my book
BTW I hope everyone had a good holiday if you celebrate it.
Be back Monday....
Thanks Troy
BTW I hope everyone had a good holiday if you celebrate it.
Be back Monday....
Thanks Troy
Wow....KenCad marvelous rendering
My salute to you from distance.... :)
My salute to you from distance.... :)
Im sorry for my spammed entry, please help me delete my excess entries
-
:(


:(
Dear Troy,
On behalf of all my fellow designer friends:
Will you announce & award for 1st ,2nd and 3 winner.
Just asking:)
Thank You
Regards
Zulfadzryl
On behalf of all my fellow designer friends:
Will you announce & award for 1st ,2nd and 3 winner.
Just asking:)
Thank You
Regards
Zulfadzryl
I forgot to mention one other feature...I have included a molded in place water-line fill marker...
Dear Inventors Corp, I would like to point out a couple of features in the design I have submitted. I wanted to create something unique that would provide more function to your product, so I have included tabs that allow you to easily carry each bowl while they are full of water and pet food; if you were to fill the water at the sink for instance. The design also allows you to stack and carry multiple bowls by turning one bowl 45 degrees over the other, locking them together. regarding my question above, this design will only let you stack same size bowls. We can certainly discus refinements and design changes if needed. Thank you...
Question: Do you want the three different sizes stackable or the individual sizes stackable?
Troy Testa thanks for rating the design.
Your indication have gave us guideline on which to focus & tweak.
Please let us know if you intend to closed earlier.
I might have few other design to proposed.
Thank You
Have a nice day
Your indication have gave us guideline on which to focus & tweak.
Please let us know if you intend to closed earlier.
I might have few other design to proposed.
Thank You
Have a nice day
Hello sir, do you have specific dimensions for example the base diameter for the largest plate if you wanted it to be circle.
Or length and width dimensions for the same base plate if you wanted it square or elongated in shape.
as i can make a very large or very small plate. :D
thanks!
Or length and width dimensions for the same base plate if you wanted it square or elongated in shape.
as i can make a very large or very small plate. :D
thanks!
@ Albertus Putra the Material is a bio bamboo eco friendly composite can be injection molded just like plastic.
so the main materials is bamboo? and it will wrapped by plastic?
@ TomyAsa... My Sketch looks exactly like RobHare's design

Thanks.
sir can you upload rought sketch ?
Ahhhh Yes sir, you caught me. You would be correct that would be a plus for the larger dogs. I believe we should consider this option.
Thank You,
Troy Testa, Inventors, Corp.
Thank You,
Troy Testa, Inventors, Corp.
Hi,
You miss-out the raised feeders...
Do we need to cater for this option?
It is a whereby we add additional parts to heighten the level from floor to another height.
Thank You
Zulfadzryl
You miss-out the raised feeders...
Do we need to cater for this option?
It is a whereby we add additional parts to heighten the level from floor to another height.
Thank You
Zulfadzryl
Wow fantastic response guys.
@ prabhasara The three sizes should stack with there respective size for shipping as I will be ordering 5000 of each size
@ KeyConcepts what can I say your design is really great! My Thoughts are the mote and drinking area are a bit small remember drool factor. Really love the SS insert you defiantly impress me with your design. how a little tweaking.
@ zulfadzryl you my friend Have certantly made several valid points all across the board. I have found a manufacture that could make this out of a biodegradable bamboo composite that would make a lot of sense. the SS design is much more expensive so thinking plastic at the moment.
Consideration
1) Plastic manufacture via injection molding and Sus are by deep drawn stamping
2) Features :
Plastic:
- Come in a variety of sizes, shapes, colors, weights and prices MULTIPLE COLORS IS VERY GOOD SHOULD STACK TOGETHER AS NO WASTED SPACE. PLEASE SEE..... ROBHARE DESIGN AS HE ILLUSTRATES THIS VERY WELL... WE COULD HAVE POTENTIENTLY HAVE SEVERAL MODELS WE WILL USE
- Generally are the most affordable VERY GOOD
- Come in tip resistant and heavy duty styles I LIKE HEAVY DUTY AND TIP PROOF
- Can be chewed, which may cause breakage BIODEGRADABLE A BIG PLUS
- Some pets may be allergic AAAAAAACHHHHHHUUUUUUU
Sus @ Stainless Steel :
- Do not rust TRUE
- Cannot be chewed VERY TRUE
- Are easy to clean and dishwasher safe A PLUS
- Animals are not likely to be allergic ONCE AGAIN AAAAAACCCCHHHHUUUUUU LOL
- Come in non-skid types (puppies often chew on this non-slip ring so it may need to be removed) GREAT POINT FOR DISCLAMER DONT WANT TO CHOKE A PUPPY!
- May have a slightly higher initial cost THE INNITAL COST IS DOUBLE RRRRRR
I want to again to thank you for these great and valid points to consider.
I am very pleased with this site and find it amazing how simple it is to work with designers from all around the world. I look forward to hosting many contests here. This one is the less complicated one to start with but all designers that enter will be privately invited on the next one that coming very soon...
Thanks again guys,
Inventively Yours, Troy Testa / Inventors, Corp.
@ prabhasara The three sizes should stack with there respective size for shipping as I will be ordering 5000 of each size
@ KeyConcepts what can I say your design is really great! My Thoughts are the mote and drinking area are a bit small remember drool factor. Really love the SS insert you defiantly impress me with your design. how a little tweaking.
@ zulfadzryl you my friend Have certantly made several valid points all across the board. I have found a manufacture that could make this out of a biodegradable bamboo composite that would make a lot of sense. the SS design is much more expensive so thinking plastic at the moment.
Consideration
1) Plastic manufacture via injection molding and Sus are by deep drawn stamping
2) Features :
Plastic:
- Come in a variety of sizes, shapes, colors, weights and prices MULTIPLE COLORS IS VERY GOOD SHOULD STACK TOGETHER AS NO WASTED SPACE. PLEASE SEE..... ROBHARE DESIGN AS HE ILLUSTRATES THIS VERY WELL... WE COULD HAVE POTENTIENTLY HAVE SEVERAL MODELS WE WILL USE
- Generally are the most affordable VERY GOOD
- Come in tip resistant and heavy duty styles I LIKE HEAVY DUTY AND TIP PROOF
- Can be chewed, which may cause breakage BIODEGRADABLE A BIG PLUS
- Some pets may be allergic AAAAAAACHHHHHHUUUUUUU
Sus @ Stainless Steel :
- Do not rust TRUE
- Cannot be chewed VERY TRUE
- Are easy to clean and dishwasher safe A PLUS
- Animals are not likely to be allergic ONCE AGAIN AAAAAACCCCHHHHUUUUUU LOL
- Come in non-skid types (puppies often chew on this non-slip ring so it may need to be removed) GREAT POINT FOR DISCLAMER DONT WANT TO CHOKE A PUPPY!
- May have a slightly higher initial cost THE INNITAL COST IS DOUBLE RRRRRR
I want to again to thank you for these great and valid points to consider.
I am very pleased with this site and find it amazing how simple it is to work with designers from all around the world. I look forward to hosting many contests here. This one is the less complicated one to start with but all designers that enter will be privately invited on the next one that coming very soon...
Thanks again guys,
Inventively Yours, Troy Testa / Inventors, Corp.
Similar Contests on Cad Crowd
Cat Earred Headphones
We want a set of headphones designed that have cute cat ears designed on the top of the headphones. The mockup that we will include uses Beats Solo HD headphones as the template. This an easy way for us to portray the aim of the project, as we want the final outcome to look sleek and simple, but not exactly like Beats. We want a redesigned set of headphones that has fashionable cat ears on top suitable for young 20 year old females. Make 2D mock ups to give us an idea of what you have designed, then also to make up plans that can be sent to manufactures for immediate production, preferably in a cad format that can be used to 3D print the shell. Color, style, aesthetics are all up to designer, but general preferred color themes will be for white to pair with pink, and baby blue to pair with very light red.
Brick of Money
The goal of this project is to design a desk ornament that is a conversation piece.
https://goo.gl/wc3ueb
There are 3 aspects to this product:
1: The foundation: A rectangle of solid metal. Should have an expensive high end look. A bar of silver is the only thing I can think of as an example foundation. https://goo.gl/wMySnL
However, I am going for more of a brushed nickel look.
2: The casing that sits on top of the medal foundation. This casing is either made of glass or plastic and will be glued to the medal foundation.
3. $500 in one dollar bills will be inside the glass casing.
The attached image is not high end looking but should give you a basic idea of the kind of product we are looking to develop.
Mechanical Block Grab
I badly need a design for a mechanical block grab as in this link:
http://www.kmplant.com/productimages/prod0118_1.jpg
and also see this video below:
https://www.youtube.com/watch?v=ehXqP1zgbIE
I need it with the lock mechanism that can lock and release mechanically, a rachet lock
The gentlemans shaver
We need a design for a shaver handle. The design should have an exclusive look to it, not "spacey" as many established brands are. Keywords for the design could be "gentleman, scandinavian, hipster, modern man, elegant, James Bond, simple" and such.
What we need is a design made in CAD, and ultimately files ready for production, our current setup requires .dwg or .dwt files. But we would like to see an realistic 3d render of the handle.
There are though some specifications for the connection between the handle and the razor blades that should be met. Since the connection is an standard set of from our razor-blade production partner. In the attached files there are an example of an handle and the lock mechanism, so the way the blades are connected and the sliding lock works should be thought into the design.
It's for the scandinavian market, so the design should fit in there, and should ofcourse have a good grib, size and weight to it. We have a target weight of minimum 50-60gr to the handle.
Mixer Tank Design
Design a stainless steel mixer tank of about 9000litres for blending sugar molasses with water prior to fermentation. Suggested dimension of tank is:
Height = 1.52 metres
Diameter = 2.72metres
Please specify agitaor capacity etc.
Tank should be dished bottom with very gently slope for easy of emptying.
KenCad
Designer