Controller design

Contest Closed
Description:
I need a controller designed for a project of mine. It's for a video game system. Things to keep in mind I would be getting the controller made, so there has to be enough room for the hardware on the inside.
Wants:
Keep in mind there is a hexagon theme, doesn't have to pertain the the design, thought I'd throw that in. Also for the buttons on the controllers. For the right side the buttons will be A-E-O-N. A will be the bottom button, E would be on the left, O would be on the top and N will be on the right. I don't have any work or ideas but I would like the comfort of the controller to be very similar to the Xbox 360 controller. Please feel free to ask any questions.
Ask for Sample:
I would like a sample, then I will ask the best designer to complete my project.
Software:
  1. AutoCAD Architecture
  2. AutoCAD Electrical
  3. AutoCAD Mechanical

Entries

#19 gamepad by budiawan
May 28, 2016 4:12
#18 Regs Hex Controller by Rene Kruger
May 27, 2016 20:48
#17 Game Controller by Mahbub
May 27, 2016 19:09
#16 Modern Joypad by Ravi Sagar
May 27, 2016 12:55
#15 Control Gamepad hexagon theme by Daniel Alejandro
i just need to add some details but i saw the project a little late
more
May 27, 2016 5:28
#14 adjustable controller by disha RM
JPEG preview in ZIP files (4 pict)
more
May 24, 2016 17:49
#13 MY XBOX VERSION 2 by 25ART
Here my second entry for controller design contest.
Same as first entry, but I added hexagon grip (hand gripper) so it more comfort when holding.
File format available are same as first entry.
Just for fun :)
more
May 24, 2016 8:08
#12 MY XBOX VERSION 1 by 25ART
This is my first entry for controller design.contest. My design looks like xbox design from top view but its actually different on the bottom side. With elegant and comfortable design when holding, I propose LED between top and bottom cover to make it looks modern!
File format available:
1) AutoCAD
2) Solidwork
3) Rhino
4) STP/STEP
5) IGS/IGES
6) STL
Just for fun only :)
more
May 24, 2016 8:03
#11 controller by elmasry
This is my idea for it.. Please give your feedback and rate.. And feel free to ask any improvement. Thanks
more
May 16, 2016 22:11
#10 Controller V1 by ProtoTech Workbench
Hello,
Please send me a feedback for the design attached.
Thank you and looking forward,
Liviu Barbu
ProtoTech Workbench Team
more
May 16, 2016 6:54
#9 Gaming Controller With Screen by VertuDesign
This is conceptual design for gaming controller. This design is made for real hardcore gamer with simple Design and Good Ergonomics. the ergonomics of this controller is made for covert your hands in hours of gaming. If you want i can easily convert this into 3d format for further development. I am open for any suggestions and changes.
more
May 13, 2016 11:22
#8 Hexidecimal Designed Controller for Xbox by Decker
Love to be a member of this design team. Have lots of great ideas and experience to boot!
more
May 10, 2016 5:11
#7 XBOX PRO 6 by AZMI
Just sample and need to be revised or remodel
more
May 7, 2016 14:04
#6 Hexagon Controller by BRJackson, P.E.
X-Box 360 controller with hexagon accents.
more
May 6, 2016 18:42
#5 Controller by Lhommequisaitlire
frog Xbox controller
more
May 6, 2016 14:12
#4 design sketch by Albertus Putra
This is the idea of controller design (taken the shape of XBOX 360 controller)
Do you need extra button? or you need to remove some buttons?
Please give feedback regarding this design
more
May 3, 2016 9:18
#3 Controller by Irfan
Controller Design
more
May 2, 2016 9:29
#2 Controller by Adam
Apr 28, 2016 18:23
#1 Sample_Control by Mark Malum
Hello, I am a mechanical designer, I like to discuss the issue with you on Skype will you be available?
Manuel
Skype: Manuel Dad
more
Apr 27, 2016 20:17

Discussion

VertuDesign

Designer

Fri, 13 May 2016 11:30:39 +0000
Hi
I have recently submitted my proposal i would like to get review on it. If you want some changes please fell free to tell and i can convert it into 3D design and also can make revolving video of it. thank you

Decker

Designer

Fri, 29 Apr 2016 19:12:32 +0000
I feel the prize money for a contest on this site should be around $300+ just due to the fact it motivates designers to give it a real run for the money. They tend to put more heart into it when they see dollars and people like me see that your a real player and may have a job to win at the end of a contest like this. $80 just doesn't motivate me to try hard enough that all.

Dwizzle2k9

Buyer

Thu, 28 Apr 2016 19:15:04 +0000
A month but honestly a lot sooner than the deadline.
Thu, 28 Apr 2016 18:26:50 +0000
When is the deadline for the proposal?

Dwizzle2k9

Buyer

Wed, 27 Apr 2016 23:14:54 +0000
How much should it be?
Wed, 27 Apr 2016 20:17:58 +0000
Prize is just a bit on the low side!!!.

Similar Contests on Cad Crowd

PDF to SolidWorks
Convert PDF to Solid Works 14
From 2D to 3D
Please make this old 2D drawing in to 3D drawing - with correct meassures. When it is done, I also need to have a drawing of the same tool - but where the top is blank. Meaning that there is no - thread - so we can cut the thread afterwards. It is attached as the M14 drawing.
Accent Piece
I have 3D probed/scanned an object that I need to recreate on my CNC router. I'm using Vectric VCarve Pro software- but its limited in it's 3d editing capabilities- Vectric Aspire is what I would need, but do not have the funds to upgrade at this time. So what I need is this object rendered fully in a 3D model (the other half is the same as what was scanned already (mirror image)- AND, the other side of the object has a contour to it. I have yet to probe that side, but would just do a small portion, and that can be extended to create the backside "carve". So I need to do a 2-sided machining of this object. I assume an .stl file or similar would be what I need.
F1 SCHOOL CAR
I want you sir to design a F1 car and I will send you a YouTube link to see what do I mean and how I want it to look like but there is small different that I want you to make which is making a space on the bottom of the F1 car because I will use a break system on it and I have the rules and the distance as well as some more details which will be attached sir and u will only follow the yellow highlighted and the size of the space you will make on the bottom of the car will be more details on this link: http://hobbyking.com/hobbyking/store/__41921__Blue_Arrow_2_8g_High_Speed_Micro_Servo_50kg_09sec.html
Outdoor TV Enclosure
Design an outdoor TV Enclosure for 32" flat screen TV to be used outdoor such as backyard, pool, or cafeteria. - Inside the enclosure will hold flat screen TV with dimension of 30" x 18" x 2" (W x H x D). Dept can be extended if needed. - TV must be safely secure inside the enclosure when not attach to the VESA Wall mount - Must be able to mount with VESA Wall mount standard of 200mm x 200mm - Water resistant but does not need to be completely waterproofed - Have a cooling system, either ventilation for airflow (Fans) or cool down liquid (Freon) - A sound bar will be located in the bottom of the enclosure - Would be nice if the enclosure has feet that can be pushed in or pulled out when place on the ground to keep it balance.