I will create parametric CAD model from 3D scans or photos in Fusion for reverse engineering
About this service
I will create a parametric CAD model in Autodesk Fusion based on your 3D scan, photographs, or other reference data.
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, profiles, and curves.
During modeling, I will apply engineering standards and logic, using sensible dimensions and standard features where appropriate. The finished model will be checked against the original scan or reference data, and necessary corrections will be made.
Special attention will be given to connecting and mating features when modeling an assembly component. Close cooperation with the client is important, as all relevant information should be provided and potential problems caused by dimensional inaccuracies should be understood.
The accuracy of the final model depends on the quality, completeness, resolution, and scale of the supplied reference data. Where information cannot be determined reliably, assumptions may be necessary and will be identified.
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, profiles, and curves.
During modeling, I will apply engineering standards and logic, using sensible dimensions and standard features where appropriate. The finished model will be checked against the original scan or reference data, and necessary corrections will be made.
Special attention will be given to connecting and mating features when modeling an assembly component. Close cooperation with the client is important, as all relevant information should be provided and potential problems caused by dimensional inaccuracies should be understood.
The accuracy of the final model depends on the quality, completeness, resolution, and scale of the supplied reference data. Where information cannot be determined reliably, assumptions may be necessary and will be identified.
I will create a parametric CAD model in Autodesk Fusion based on your 3D scan, photographs, or other reference data.
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, profiles, and curves.
During modeling, I will apply engineering standards and logic, using sensible dimensions and standard features where appropriate. The finished model will be checked against the original scan or reference data, and necessary corrections will be made.
Special attention will be given to connecting and mating features when modeling an assembly component. Close cooperation with the client is important, as all relevant information should be provided and potential problems caused by dimensional inaccuracies should be understood.
The accuracy of the final model depends on the quality, completeness, resolution, and scale of the supplied reference data. Where information cannot be determined reliably, assumptions may be necessary and will be identified.
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, profiles, and curves.
During modeling, I will apply engineering standards and logic, using sensible dimensions and standard features where appropriate. The finished model will be checked against the original scan or reference data, and necessary corrections will be made.
Special attention will be given to connecting and mating features when modeling an assembly component. Close cooperation with the client is important, as all relevant information should be provided and potential problems caused by dimensional inaccuracies should be understood.
The accuracy of the final model depends on the quality, completeness, resolution, and scale of the supplied reference data. Where information cannot be determined reliably, assumptions may be necessary and will be identified.
I will create a parametric CAD model in Autodesk Fusion based on your 3D scan, photographs, or other reference data.
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, pr... read more
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, pr... read more
I will create a parametric CAD model in Autodesk Fusion based on your 3D scan, photographs, or other reference data.
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, profiles, and curves.
During modeling, I will apply engineering standards and logic, using sensible dimensions and standard features where appropriate. The finished model will be checked against the original scan or reference data, and necessary corrections will be made.
Special attention will be given to connecting and mating features when modeling an assembly component. Close cooperation with the client is important, as all relevant information should be provided and potential problems caused by dimensional inaccuracies should be understood.
The accuracy of the final model depends on the quality, completeness, resolution, and scale of the supplied reference data. Where information cannot be determined reliably, assumptions may be necessary and will be identified. read less
The process includes cleaning and preparing the scan, removing unwanted elements, repairing surfaces, refining the mesh, and aligning the scanned body with the CAD coordinate system. The scan is then used as a reference for recreating geometry and features such as holes, planes, profiles, and curves.
During modeling, I will apply engineering standards and logic, using sensible dimensions and standard features where appropriate. The finished model will be checked against the original scan or reference data, and necessary corrections will be made.
Special attention will be given to connecting and mating features when modeling an assembly component. Close cooperation with the client is important, as all relevant information should be provided and potential problems caused by dimensional inaccuracies should be understood.
The accuracy of the final model depends on the quality, completeness, resolution, and scale of the supplied reference data. Where information cannot be determined reliably, assumptions may be necessary and will be identified. read less
Service offer categories
3D Scan to CAD Service
Reverse Engineering
Part-to-CAD Modeling
Software & skills
2d to 3D CAD Modeling
3D CAD Modeling
3D Reverse engineering
3D Scan to CAD
3D Scan to CAD Service
Autodesk Fusion
Autodesk Fusion 360
Autodesk Fusion 360 CAD
Autodesk Fusion 360 CAM
Mesh to CAD
+7 more
Portfolio
This service includes
| Service tiers | Simple $20 | Standard $50 | Advanced $100 |
|---|---|---|---|
| Summary | Simple Part | Medium complex part | Complex Part |
| Details | Parametric CAD model of a simple part from 3D scans or reference photos. | Parametric CAD model of a moderately complex part from 3D scans | Parametric CAD model of a complex part from 3D scans |
| Delivery time | 1 day | 2 days | 5 days |
| Number of revisions | 2 | 2 | 3 |
Member since
June 2026
Languages
English,
Croatian
Avg. response time
1 hour
Mechanical Engineer | 3D CAD Design, CAM & CNC Programming
I am a Design and Manufacturing Engineer with 16 years of experience in precision manufacturing and medical device production, specializing in orthopedic and trauma implants, surgical instrument sets, and CNC-machined metal components. My experience covers the complete product lifecycle - from product design and technical documentation to manufacturing process development, CNC process planning, an...
read more
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More from Bruno F.
More similar services
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 2D & 3D Design services
- 2D & 3D Modeling services
- CAD Modeling services
- 3D CAD Modeling services
- Engineering Design services
- 2D & 3D CAD Design services
- Drafting services
- AutoCAD services
- 3D Models services
- Mechanical Design services
- Mechanical 3D Design services
- Design for Manufacturing services
- 2D Drawing services
- Product Design services
- 2D Drafting services
- CAD Drafting services
- 2D AutoCAD services
- Rendering services
- 3D Rendering services
- SolidWorks services
- Mechanical Engineering services
- 3D Solidworks services
- Manufacturing Drawings services
- 2D & 3D Drafting services
- 2D/3D AutoCAD services
- Assembly Design services
- 2D & 3D Modeling Solidworks services
- Engineering Drawing services
- Industrial Design services
- Design Engineer services
- Mechanical Engineer services
- CAD Conversion services
- AutoCAD Mechanical services