I will design, model, and simulate your mechanical part or assembly in SolidWorks and ANSYS
About this service
I offer end-to-end mechanical design services combining SolidWorks 3D modeling with ANSYS engineering simulation. Whether you need a clean parametric CAD model, production-ready render set, turntable animation, or a full finite element analysis (FEA) study, I can deliver it.
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardware, gear trains, rigging/lifting hardware, and more)
- Full render sets (front, back, left, right, top, bottom, isometric, dimetric, trimetric) plus 360-degree turntable animations
- ANSYS Mechanical FEA: static structural analysis (deformation, von Mises stress), transient thermal analysis, and simulation-driven design validation
- Clean, manifold geometry suitable for downstream manufacturing drawings, 3D printing, or tooling development
Recent work in my portfolio includes a dual-chamber soap dispenser, a flange shaft coupling, a planetary gearbox, rigging hardware (shackle bolt), and a full V8 engine assembly with ANSYS thermal/structural analysis on the piston.
Send me your requirements (reference images, sketches, or existing files) and I'll provide a clear scope and timeline before starting.
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardware, gear trains, rigging/lifting hardware, and more)
- Full render sets (front, back, left, right, top, bottom, isometric, dimetric, trimetric) plus 360-degree turntable animations
- ANSYS Mechanical FEA: static structural analysis (deformation, von Mises stress), transient thermal analysis, and simulation-driven design validation
- Clean, manifold geometry suitable for downstream manufacturing drawings, 3D printing, or tooling development
Recent work in my portfolio includes a dual-chamber soap dispenser, a flange shaft coupling, a planetary gearbox, rigging hardware (shackle bolt), and a full V8 engine assembly with ANSYS thermal/structural analysis on the piston.
Send me your requirements (reference images, sketches, or existing files) and I'll provide a clear scope and timeline before starting.
I offer end-to-end mechanical design services combining SolidWorks 3D modeling with ANSYS engineering simulation. Whether you need a clean parametric CAD model, production-ready render set, turntable animation, or a full finite element analysis (FEA) study, I can deliver it.
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardware, gear trains, rigging/lifting hardware, and more)
- Full render sets (front, back, left, right, top, bottom, isometric, dimetric, trimetric) plus 360-degree turntable animations
- ANSYS Mechanical FEA: static structural analysis (deformation, von Mises stress), transient thermal analysis, and simulation-driven design validation
- Clean, manifold geometry suitable for downstream manufacturing drawings, 3D printing, or tooling development
Recent work in my portfolio includes a dual-chamber soap dispenser, a flange shaft coupling, a planetary gearbox, rigging hardware (shackle bolt), and a full V8 engine assembly with ANSYS thermal/structural analysis on the piston.
Send me your requirements (reference images, sketches, or existing files) and I'll provide a clear scope and timeline before starting.
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardware, gear trains, rigging/lifting hardware, and more)
- Full render sets (front, back, left, right, top, bottom, isometric, dimetric, trimetric) plus 360-degree turntable animations
- ANSYS Mechanical FEA: static structural analysis (deformation, von Mises stress), transient thermal analysis, and simulation-driven design validation
- Clean, manifold geometry suitable for downstream manufacturing drawings, 3D printing, or tooling development
Recent work in my portfolio includes a dual-chamber soap dispenser, a flange shaft coupling, a planetary gearbox, rigging hardware (shackle bolt), and a full V8 engine assembly with ANSYS thermal/structural analysis on the piston.
Send me your requirements (reference images, sketches, or existing files) and I'll provide a clear scope and timeline before starting.
I offer end-to-end mechanical design services combining SolidWorks 3D modeling with ANSYS engineering simulation. Whether you need a clean parametric CAD model, production-ready render set, turntable animation, or a full finite element analysis (FEA) study, I can deliver it.
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardwar... read more
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardwar... read more
I offer end-to-end mechanical design services combining SolidWorks 3D modeling with ANSYS engineering simulation. Whether you need a clean parametric CAD model, production-ready render set, turntable animation, or a full finite element analysis (FEA) study, I can deliver it.
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardware, gear trains, rigging/lifting hardware, and more)
- Full render sets (front, back, left, right, top, bottom, isometric, dimetric, trimetric) plus 360-degree turntable animations
- ANSYS Mechanical FEA: static structural analysis (deformation, von Mises stress), transient thermal analysis, and simulation-driven design validation
- Clean, manifold geometry suitable for downstream manufacturing drawings, 3D printing, or tooling development
Recent work in my portfolio includes a dual-chamber soap dispenser, a flange shaft coupling, a planetary gearbox, rigging hardware (shackle bolt), and a full V8 engine assembly with ANSYS thermal/structural analysis on the piston.
Send me your requirements (reference images, sketches, or existing files) and I'll provide a clear scope and timeline before starting. read less
What I offer:
- SolidWorks parametric part and assembly modeling (mechanical components, consumer products, machine hardware, gear trains, rigging/lifting hardware, and more)
- Full render sets (front, back, left, right, top, bottom, isometric, dimetric, trimetric) plus 360-degree turntable animations
- ANSYS Mechanical FEA: static structural analysis (deformation, von Mises stress), transient thermal analysis, and simulation-driven design validation
- Clean, manifold geometry suitable for downstream manufacturing drawings, 3D printing, or tooling development
Recent work in my portfolio includes a dual-chamber soap dispenser, a flange shaft coupling, a planetary gearbox, rigging hardware (shackle bolt), and a full V8 engine assembly with ANSYS thermal/structural analysis on the piston.
Send me your requirements (reference images, sketches, or existing files) and I'll provide a clear scope and timeline before starting. read less
Service offer categories
SolidWorks Design Services
3D Modeling
FEA Finite Element Analysis
Software & skills
3D Modeling
3D Rendering
ANSYS
FEA
SolidWorks
+2 more
This service includes
| Service tiers | Simple $350 | Standard $450 | Advanced $780 |
|---|---|---|---|
| Summary | Basic CAD Modeling | CAD Modeling + Renders | CAD Modeling + ANSYS FEA |
| Details | Parametric SolidWorks part or simple assembly modeling from your reference images, sketches, or rough dimensions. Clean, manifold geometry ready for further use. | Full SolidWorks assembly modeling plus a production-ready render set (multiple angles) and a 360-degree turntable animation. | Complete SolidWorks assembly modeling, render set, and turntable animation, plus an ANSYS Mechanical FEA study (static structural and/or transient thermal analysis) on the critical component. |
| Delivery time | 3 days | 5 days | 10 days |
| Number of revisions | 3 | 3 | 3 |
Member since
July 2026
Languages
English,
Urdu
Avg. response time
1 hour
Mechanical Design Engineer | SolidWorks Reverse Engineering & GD&T Production Drawings
I'm a PEC-registered mechanical design engineer specializing in reverse engineering and production CAD in SolidWorks and AutoCAD. Send a hand sketch, a photo, a worn physical part or a rough PDF, and I return manufacturing-ready 3D models and fully dimensioned GD&T drawings, usually within 48 hours.
What I deliver:
• Reverse engineering — physical part, 3D scan or photo to accurate, editable CAD... read more
What I deliver:
• Reverse engineering — physical part, 3D scan or photo to accurate, editable CAD... read more
Cad Crowd Billing Security policy
Service quality is protected by Cad Crowd Billing Security policy.
More from M.shahryar K.
More similar services
See related services
- 3D Design services
- 3D Modeling services
- CAD Design services
- 2D & 3D Design services
- 3D CAD Design services
- 2D & 3D Modeling services
- CAD Modeling services
- 3D CAD Modeling services
- Engineering Design services
- Drafting services
- 3D Models services
- AutoCAD services
- Mechanical Design services
- Design for Manufacturing services
- Mechanical 3D Design services
- Product Design services
- 2D Drawing services
- 2D Drafting services
- CAD Drafting services
- 2D AutoCAD services
- Rendering services
- 3D Rendering services
- Architectural Design services
- SolidWorks services
- Mechanical Engineering services
- 3D Solidworks services
- Manufacturing Drawings services
- 2D & 3D Drafting services
- 2D/3D AutoCAD services
- Assembly Design services
- 2D & 3D Modeling Solidworks services
- Engineering Drawing services
- Design Engineer services
- Industrial Design services
- Mechanical Engineer services
- Interior Design services