Hire Mechanical Engineer Designers near Oregon, United States

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different proje... Read more

I graduated from Washington State University with a master's of science in mechanical engineering. During my master's program, I was worked as a research assistant and collaborating on different projects with Robert Bosch GmbH company. I have a broad range of skills in Computer-Aided Design (CAD), Computational Fluid Dynamics (CFD), and Finite Element Analysis (FEA). I am proficient at COMSOL, ANSYS, Abaqus, SolidWorks, CATIA V5, Inventor, AutoCAD MEP, Revit, Pro/E [Creo], Matlab, Simulink, Python, Matlab LiveLink, Mathematica, and Dualfoil. SolidWorks Certifications: -Associate and Professional in Mechanical Design (CSWA and CSWP). Please Visit My Portfolio: https://drive.google.com/file/d/1mIvxhUFDAw-8TxiUwuxsUn_8ZLm3oECV/view?usp=sharing

https://www.youtube.com/watch?v=xkhk6fLjKis (Youtube Video about Toni volunteering for a robotics team) Toni grew up in Minnesota, but is now running Carlstrom Design out of her home in Washington... Read more

https://www.youtube.com/watch?v=xkhk6fLjKis (Youtube Video about Toni volunteering for a robotics team) Toni grew up in Minnesota, but is now running Carlstrom Design out of her home in Washington State. In her free time, Toni enjoys volunteering with a local robotics team called The Bearded Pineapples, going on hiking and skiing adventures, and writing. Toni enjoys being an independent Mechanical Engineer because the variety of work allows her to be creative every day! Thank you for considering Toni for your job. If you have any questions about her services or past work, feel free to reach out via email or phone call!

I am a recent graduate from the M.S.E. in Robotics program at the University of Pennsylvania, where I also completed my B.S.E. in Mechanical Engineering. There, I also worked as a researcher in roboti... Read more

I am a recent graduate from the M.S.E. in Robotics program at the University of Pennsylvania, where I also completed my B.S.E. in Mechanical Engineering. There, I also worked as a researcher in robotic design and soft robotics hardware. Much of my experience is in mechanical design, rapid prototyping, soft materials manufacturing, system evaluation, and data analysis.

I’m a Mechanical Engineering Technology graduate (December 2021) with hands-on experience in design, diagnostics, and mechanical repair. I specialize in interpreting and creating schematics, blueprint... Read more

I’m a Mechanical Engineering Technology graduate (December 2021) with hands-on experience in design, diagnostics, and mechanical repair. I specialize in interpreting and creating schematics, blueprints, and wiring diagrams, and I’m proficient in AutoCAD, SolidWorks, 3D printing, and PLC programming. My strengths include working with both electronic and mechanical systems, using diagnostic test instruments and calibration tools to troubleshoot and improve performance. I’m experienced with AC and DC voltage systems and bring a practical, detail-oriented approach to every project. I’ve applied my skills across design and repair projects, focusing on accuracy, efficiency, and reliable results. I’m committed to delivering high-quality work and clear communication for every client.

As a mechanical engineer, I have worked on many mechanical designs using SolidWorks, Siemens NX, and Fusion 360. Along with my CAD modeling skills, I have relevant engineering, design, and manufacturi... Read more

As a mechanical engineer, I have worked on many mechanical designs using SolidWorks, Siemens NX, and Fusion 360. Along with my CAD modeling skills, I have relevant engineering, design, and manufacturing knowledge to develop feasible and reliable designs.

I am a seasoned mechanical engineer with extensive experience in the design and development of non-standard parts, automated warehouse systems, industrial machinery, and product mechanical structures.... Read more

I am a seasoned mechanical engineer with extensive experience in the design and development of non-standard parts, automated warehouse systems, industrial machinery, and product mechanical structures. Over the years, I have honed my expertise in creating detailed production drawings, CNC laser unfold drawings, and innovative solutions for hydraulic, agricultural, and special-purpose automation machinery. I have a deep understanding of standard part selection and sourcing, and I am well-versed in the complexities of the supply chain, particularly from my ten years of living in China—one of the world's largest spare parts suppliers. I am proficient in a variety of design software, including SolidWorks, AutoCAD, Fusion360, UG NX, and Pro-E. Additionally, I use rendering tools such as KeyShot, Blender, and Rhino to bring designs to life.

Mechanical Design Engineer in the automotive industry. BS in Mechanical Engineering. MEng in Engineering Management.

Mechanical Design Engineer in the automotive industry. BS in Mechanical Engineering. MEng in Engineering Management.

* 3 years experience in parametric, CFD, and FEM CAD programs * 2 years experience as a professional product design and manufacturing specialist * Mechanical engineering academic background * Strong h... Read more

* 3 years experience in parametric, CFD, and FEM CAD programs * 2 years experience as a professional product design and manufacturing specialist * Mechanical engineering academic background * Strong history in leadership and communication roles

A playful, sensitive, caring human who has practiced and loved designing products since I was a child. Raised with regular access to a wood shop from age five by a wonderfully patient father I built... Read more

A playful, sensitive, caring human who has practiced and loved designing products since I was a child. Raised with regular access to a wood shop from age five by a wonderfully patient father I built cabinets and furniture in my early teens and worked into the construction trades until my early 20's when I tired of my options and started night school at my local JC. I eventually earned a degree in Mechanical Engineering from Cal Poly, SLO, and worked for 12 years in the design and manufacture of a range of products in the industrial, recreation and medical device sectors. During that time I learned the subtleties of many primary manufacturing processes including machining and metal fabrication, extrusion design, some metal casting, CNC sheet metal production, metal hydro-forming and high-pressure thermal forming of plastics along with applicable coatings and finishing technologies for the same. I was also schooled in the development, application, and auditing of quality systems under ISO and FDA guidelines and the associated supply chain establishment and maintenance needed for the manufacture of products to exacting standards. Thinking I needed a change from the corporate world I began consulting on designs for small solar and wind installations and studied the emerging materials science applications of Geopolymers for infrastructure applications. I developed conceptual designs for automated equipment to refurbish small bridges based on the results of various Geopolymer studies but was unable to elicit support for its development. I explored ways of improving commercial greenhouse production while lowering the energy expenditures and later for lowering the cost and improving the efficiency of GSHP, (Ground Source Heat Pump), technologies but was equally unsuccessful at finding support for my proposed solutions. In recent years I have returned to consulting on product development for others and still look forward to helping develop new and refine existing technologies to address the considerable challenges facing our world. In general, I would characterize myself as a mostly talented mechanical/manufacturing engineer and product designer who is skilled at the synthesis of elegant solutions through the application of wide-ranging technologies.

Hello, I have my bachelors degree in mechanical engineering and a minor in economics. I have previous experience working on projects in the automotive industry with specific skill sets revolving manuf... Read more

Hello, I have my bachelors degree in mechanical engineering and a minor in economics. I have previous experience working on projects in the automotive industry with specific skill sets revolving manufacturing, CNC 3d printing, 3D modeling and design, fluid dynamics, strength and materials, etc.

Mechanical Engineer with over 15 years of experience in design and manufacturing, I excel in delivering high-quality, efficient, and innovative solutions. I've worked in the automotive and medical dev... Read more

Mechanical Engineer with over 15 years of experience in design and manufacturing, I excel in delivering high-quality, efficient, and innovative solutions. I've worked in the automotive and medical device industries, managing projects from concept to implementation. Let’s collaborate to bring your project to life with precision and expertise.

I'm a Mechanical Engineer with a strong background in 3D modeling, product design, and CAD drafting. I specialize in using SolidWorks and AutoCAD to bring ideas to life through detailed technical draw... Read more

I'm a Mechanical Engineer with a strong background in 3D modeling, product design, and CAD drafting. I specialize in using SolidWorks and AutoCAD to bring ideas to life through detailed technical drawings and realistic 3D models. My experience includes full mechanical assemblies, motion simulation, and design for manufacturing. Whether you need help converting sketches into production-ready CAD files or refining an existing concept for 3D printing, I'm here to provide reliable, precise, and efficient solutions.

I am a Mechanical Engineer with a passion for renewable energy and mechanical design. My expertise includes prototype scale up, product design and development, material and product testing, manufactur... Read more

I am a Mechanical Engineer with a passion for renewable energy and mechanical design. My expertise includes prototype scale up, product design and development, material and product testing, manufacturing, injection molding, research and development, system modeling, CFD, FEA, and data analysis. I am also proficient in Autodesk Inventor, Vault, Python, Excel VBA, LTspice, and ANSYS simulation software. I hold an M.S. in Mechanical Engineering from Oregon State University, where I studied wave energy converters, mechanical design, system modeling, and control systems. I spent the next decade at ESS, where I played a key role in the design and development of the iron redox flow battery cell stack, as well as system, manufacturing, and test equipment design projects. During my tenure, ESS grew from a startup of five engineers to a publicly traded company. I am the inventor on seven patents and have experience managing teams of engineers. In my free time, I enjoy biking, climbing, skiing, spending time outdoors, and traveling.

Michael Trovato is the founder of Valence Tek, a groundbreaking mechanical engineering design house in the Pacific Northwest. He grew up on the east coast and graduated from North Carolina State Unive... Read more

Michael Trovato is the founder of Valence Tek, a groundbreaking mechanical engineering design house in the Pacific Northwest. He grew up on the east coast and graduated from North Carolina State University with a degree in Mechanical Engineering. He rebuilt his first automobile before the age of fifteen and had to enlist the help of parents to test drive his work. Michael is referred to as “The Idea Guy” because of his track record of innovative ideas that lead to new technologies. He has designed robotic & automation systems for McKesson, Abbott Laboratories, The Veteran Affairs, Cornerstone Automation Systems, and Walmart. His latest endeavors include proprietary product designs in material handling systems using integrated vision systems and complex controls. His work can be seen in Amazon warehouses as well as local pharmacies.

I have a mechanical engineering degree and have been working as a manufacturing engineer with over 10 years of experience including extensive CAD experience primarily in SolidWorks.

I have a mechanical engineering degree and have been working as a manufacturing engineer with over 10 years of experience including extensive CAD experience primarily in SolidWorks.

Mechanical Engineering student at portland state university. I've been doing some freelancing work already just by word of mouth between my clients, and am looking to do more! I have 4+ years of CNC m... Read more

Mechanical Engineering student at portland state university. I've been doing some freelancing work already just by word of mouth between my clients, and am looking to do more! I have 4+ years of CNC machine shop experience and 9+ years of technical 3D Modeling experience. Professionalism, quick turn around times, and quality functional work are what I can deliver.