Hire Electrical Design Designers in United States

Kevin has 13 years of experience working as a AutoCAD drafter forvarious large design firms throughout North America. He also worked in a variety of design fields from Landscape, Piping, Electrical, a... Read more

Kevin has 13 years of experience working as a AutoCAD drafter forvarious large design firms throughout North America. He also worked in a variety of design fields from Landscape, Piping, Electrical, and Mechanical Design.Kevin has five years experience also as a camera operator and video editor and has most recently lived throughout various Asian countries as a Videographer for an internet travel show. He currently works at Mott MacDonald in Westwood, MA, as an Electrical Design Drafter.

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plum... Read more

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plumbing systems that pass plan review the first time. Expertise: Mechanical Engineering Design HVAC load calculations (Elite Software) – Ducted & ductless systems – VRF, split, rooftop, air-source heat pumps Plumbing Design for residential and commercial Buildings Electrical Design for residential and commercial Buildings Energy modeling – Title 24 energy estimation report COMcheck, REScheck, MEP coordination – clash-free Revit models, Fire protection – sprinkler hydraulic calcs, standpipe layouts (NFPA 13/14) Low-voltage – fire alarm, security, AV, nurse-call (NICET-ready) What I Deliver Fully stamped MEP sets (PDF + editable CAD/Revit) Code-compliant designs (IBC, IMC, IPC, NEC, IECC, state amendments) Fast 5–7 day turnarounds on most residential & light-commercial projects Two revision round included; additional at fixed rates Typical Projects Single-family & multi-family residential Retail shells, restaurants, offices < 20,000 sf MEP Tenant improvements & Renovations Data centers, warehouses, medical offices Software & Standards Revit 2025 | SolidWorks 2025 | RHVAC and CHVAC from Elite Software Why Clients Hire Me Since my plans are approved by the city on the first submission, I cover all the city amendments at no additional fee. One-stop stamping – no juggling multiple state PEs Very cost-effective pricing – flat fees or Hourly Zero surprises – I flag code conflicts before submittal Let’s get your plans approved. Upload your architectural set or sketch; I’ll return a firm quote within 24 hours.

5+ years CAD Design

5+ years CAD Design

I'm a hardworking, creative, and mechanically inclined individual with a great work ethic and outstanding time management. Experienced in a broad range of industries to include the Automotive, Aviatio... Read more

I'm a hardworking, creative, and mechanically inclined individual with a great work ethic and outstanding time management. Experienced in a broad range of industries to include the Automotive, Aviation, Electrical Contracting, Healthcare, and the Security industry. Authorized to work in the US for any employer with a Private Security Clearance.

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNE... Read more

- TURNKEY, ONE-STOP-SHOP for new building construction and renovation Electrical Drawings and Specifications design that you can trust to be done accurately and thoughtfully the first time - DESIGNED OVER 1,500 ELECTRICAL DRAWINGS AND SPECIFICATIONS PACKAGES from start-to-finish for projects located across 17 different states - OVER 15 YEARS OF EXPERIENCE in electrical system design for new building constructions, renovations and modifications, including 9 years total of remote/satellite work - WORKED FOR THREE PROFESSIONAL ELECTRICAL ENGINEERING FIRMS located in California, Florida, and Georgia under direct supervision by and in collaboration with experienced Professional Engineers We all know that searching on these freelance sites means you have to sort through so many profiles, and that just a few simple questions are almost always at top of mind: 1) Does this person behind the profile have the actual expertise and experience needed to meet the high standards I have for this project? 2) Does this person communicate clearly and effectively, and is he/she accessible, available, and responsive to me? 3) Will it truly be worth it to farm out projects to a freelancer, or will the investment of my time and money be better served by just hiring someone in-house or maybe doing it myself, instead? Let me show you that I can deliver on all three of the above questions for your project and prove to you that you've made the right decision by hiring me to work remotely on your new building construction or renovation design documents. I'll design the Electrical Drawings and Specifications for each project from inception to completion or based on our specific, mutually agreed upon scope of work... Only a Professional Engineer's review, then seal, signature and date is required upon completion of the project. I'll, of course, communicate closely with you to ensure the design package is produced precisely and delivered in a timely manner, so that the entire design process meets the Engineer's, Architect's, and Client's highest expectations and so that each project's deadlines are met. I'll confirm that the design is in compliance with all applicable state and local codes and Authorities Having Jurisdiction. I'll join design team conference meetings and coordinate with other trades, manufacturer representatives and project decision makers, so clear communication happens. I'll meet project milestone deliverables and send progress set submittals, for reliable and accurate project execution. You can free up your time and offload the vast majority of the electrical design project to me, knowing that each project will be custom, individually tailored, and given the expertise, thought, and attention to detail that it deserves. I take a lot of pride in my work, and my constant goal is for that to be evident in the Plans I produce. **I can use my own extensive library of industry-recognizable Electrical and Low Voltage System CAD symbols, details, riser and one-line diagrams, schedules, general notes, etc. with corresponding drafting standards and Plan and/or Booklet Specifications... or I can quickly learn to adopt and use your firm's templates. EXPERTISE, SKILLS & KNOWLEDGE: - POWER SYSTEMS + Building Power Distribution Systems + Site Power Distribution Systems + Grounding Systems + Utility Coordination + Emergency and Standby Power Distribution Systems + Standby/Emergency Generator Systems + Power Distribution System Energy Code Compliance Analysis + Wire Sizing and Overcurrent Protection Calculations + Power Distribution System Load Summary Calculations + Photovoltaic Systems + Uninterruptable Power Systems + Power Monitoring Systems + Surge Protection Systems + Plug Load Control Systems - LIGHTING SYSTEMS + Interior Lighting + Exterior Lighting + Site Lighting + Street Lighting + Sports Field Lighting + Security Lighting + Emergency Lighting + Lighting and Lighting Control Energy Code Compliance Analysis + Photometric Analysis + Automatic Lighting Control Systems + Daylight Lighting Control Systems + Digital Lighting Management Systems + Dimming Systems - BUILDING TECHNOLOGIES + Fire Alarm Systems + Structured Cabling Systems + Audio/Visual Systems + Clock and Program Systems + Television Distribution Systems + CCTV Surveillance Monitoring Systems + Access Control Systems + Intrusion Detection Systems + Nurse Call Systems + Cable Tray Systems - ELECTRICAL STUDIES + Arc Flash Hazard Analysis Studies + Short Circuit Analysis Studies + Power Distribution System Coordination Analysis Studies + Building Electrical System Evaluations + Photometric Analysis

Born and raised in Houston, Texas. I completed high school in Conroe, Texas (Conroe High School) and was accepted to attend studies at Texas A & M University. Due to a life changing event I was unab... Read more

Born and raised in Houston, Texas. I completed high school in Conroe, Texas (Conroe High School) and was accepted to attend studies at Texas A & M University. Due to a life changing event I was unable to complete my studies there and returned home to be employed by the local electric utility company, Gulf States Utilities. Hired as a line helper in 1979, I worked in construction and maintenance of the electrical utility facilities working my way up thru the ranks from helper to apprentice lineman then to lineman 4th class then to lineman 3rd class. Once I had achieved 3rd class I was able to transition to the service department where I was trusted to work on a truck by myself unsupervised working customer service tickets and troubleshooting outages that occurred on the lines. In 1991 Gulf States Utilities was purchased by Entergy and around this time I transitioned back into the line crew in the Woodlands Network to continue construction and maintenance work on most underground but occasionally overhead lines as well. April of 1999 I transferred to the Design West group of Entergy Texas, Inc. as an Engineer Assistant and a short time later, I earned the title of Senior Engineer Assistant. I presently continue to hold that title. My present job description entails meeting with customers to determine their electrical needs, design Entergy's facilities to serve these customers, procure easements for Entergy's facilities, draft contracts and collect contributions and assemble construction job packets to hand off to our line crews to build. During the last 18 years of my employment, I have used MS Office Suite's Word, Excel, Outlook, Power Point and Access and I have used Auto CAD on a daily basis and in the past 4 years I have used GIS, Pole Foreman and other software.

I am an early career Engineer with experience in CAD, looking to gain professional experience.

I am an early career Engineer with experience in CAD, looking to gain professional experience.

Self taught engineer from Phoenix, AZ, with 12 years of Electronic Engineering and 3D Modeling Experience. I have designed products for my own company as well as for partner companies. Manufacturabili... Read more

Self taught engineer from Phoenix, AZ, with 12 years of Electronic Engineering and 3D Modeling Experience. I have designed products for my own company as well as for partner companies. Manufacturability and cost is always kept in mind; Though creating a product that is unique and feature rich makes the job fun to be apart of. I excel in solving complex problems and ensuring each product is innovative, reliable, and meets the highest standards of quality and functionality.

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industr... Read more

I am an experienced Mixed-signal PCB Designer. - Component Selection, Electrical Design, Schematic Capture, Library Creation, Board Constraints, EMI/SI/PI design best practices, Class II/III Industrial projects

I specialize as an HVAC designer/ electrical designer/BIM modeler in MEP for construction drawings. I can handle the tough task of detailing your existing HVAC/electrical shop drawings and updating th... Read more

I specialize as an HVAC designer/ electrical designer/BIM modeler in MEP for construction drawings. I can handle the tough task of detailing your existing HVAC/electrical shop drawings and updating them for you in the form of PDF's utilizing autocad or revit 2025 software. I also specialize in BIM (Building information modeling) and can detect clashes in your model or assist with any changes needed to the model. I can purge your model of unnecessary sheets or links for better organization. Whether its 2D drawings, 3D models, isometric, pipe, etc, I can detail it, draw it, and send it to you in a PDF to your standards.

I am an electrical power systems engineer with hands-on experience designing control and power systems for medium- and low-voltage equipment, including switchgear, motor control systems, residential,... Read more

I am an electrical power systems engineer with hands-on experience designing control and power systems for medium- and low-voltage equipment, including switchgear, motor control systems, residential, commercial, industrial and retrofit solutions. My background includes developing complete electrical drawing packages using AutoCAD Electrical, from concept through detailed design. I specialize in translating real-world field requirements into clean, functional, and build-ready documentation. My areas of expertise include: • Electrical schematics and wiring diagrams • Control system design and relay logic integration • MV/LV power distribution systems • Switchgear and retrofit design • Wire schedules and point-to-point termination drawings • Redline markups to production-ready CAD drawings • Panel layout and electrical equipment integration I understand both the engineering and practical installation side of projects, which allows me to deliver designs that are not only accurate but also efficient to build and troubleshoot. Whether you need a full design package or help cleaning up and organizing existing drawings, I can deliver high-quality, professional results.

My name is Lisa Brown and I am founder of Building Information Modelling Company. Our BIM Engineering Firms delivers high quality out performing designs in Electrical BIM Services. We collectively wor... Read more

My name is Lisa Brown and I am founder of Building Information Modelling Company. Our BIM Engineering Firms delivers high quality out performing designs in Electrical BIM Services. We collectively work as a team and we believe in delivering end to end solutions in electrical designs and drawings. Contact Us :- ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒

Electrical Engineer with practical experience in industrial maintenance, electrical project design, and low-voltage system implementation. I have worked as an Industrial Electrical Maintenance Engine... Read more

Electrical Engineer with practical experience in industrial maintenance, electrical project design, and low-voltage system implementation. I have worked as an Industrial Electrical Maintenance Engineer and also as an Industrial Electrical Maintenance Supervisor, gaining strong hands-on experience in troubleshooting, maintenance planning, and industrial electrical systems. I also worked as a Resident Electrical Project Engineer, where I designed and supervised several low-voltage electrical projects. My project experience includes the electrical design of a 12-story apartment building, the design and installation of the electrical system for a large hardware store, and the design and installation of lightning protection and grounding systems for Nestlé Nicaragua. My technical skills include: Electrical design for low-voltage industrial and residential systems AutoCAD drafting and electrical drawings Electrical cost estimation and budgeting Industrial electrical maintenance Lightning protection and grounding system design Microsoft Office tools for technical documentation and project management I am known for working in an organized and structured way, maintaining clear communication with clients and teams, and being strongly results-oriented. Education and Training Electrical Engineering Degree Technical training in AutoCAD drafting Studies in low-voltage distribution networks and transformers Residential electrical systems Programmable Logic Controllers (PLC) I am committed to delivering reliable, well-documented, and high-quality electrical solutions for industrial and commercial projects.

I'm an experienced Electrical Engineer and the Founder and CEO of Kerf Corp., a Delaware-based company specializing in electrical planning and design. With over 21 years in the field since 2004, I de... Read more

I'm an experienced Electrical Engineer and the Founder and CEO of Kerf Corp., a Delaware-based company specializing in electrical planning and design. With over 21 years in the field since 2004, I deliver high-quality solutions for clients in industries like nuclear power, manufacturing, and transportation. My expertise includes EPLAN Electric P8, AutoCAD (including 3D), See Electrical Expert, and other tools like Microsoft Office suite for comprehensive project management. I've led projects from design to installation and commissioning, such as waste management systems and access/surveillance setups for nuclear power plants. I apply innovative problem-solving to tackle complex electrical challenges, ensuring compliance with standards like IEC and NFPA. I thrive in collaborative environments, valuing team input while driving efficient, reliable designs. Outside work, I'm passionate about aviation — I've earned my private pilot's license for helicopters and also hold drone piloting skills. I stay active with sports and focus on nutrition for peak performance. I'm seeking freelance opportunities in electrical design where I can leverage my skills to deliver outstanding results. If you need an experienced, reliable engineer for schematics, wiring diagrams, panel layouts, or full-system designs, let's connect.

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

Experienced electrical designer specialized in: -Rapid Prototyping -Firmware Development. -ECAD Schematic Capture. -Multi-Layer PCB Design. -LT Spice Simulation

"Hi, I'm Rizwan, a seasoned CATIA V5 designer with hands-on experience in the aviation/aerospace industry. I specialize in full-cycle mechanical and electrical design, delivering high-precision soluti... Read more

"Hi, I'm Rizwan, a seasoned CATIA V5 designer with hands-on experience in the aviation/aerospace industry. I specialize in full-cycle mechanical and electrical design, delivering high-precision solutions for complex projects. Expert in: Part Design & Generative Shape Design (advanced surfacing) Assembly Design & management of large-scale structures Electrical Harness Installation (routing, wiring, EWIS, formboards, and integration) Reverse Engineering (scan-to-CAD conversion, legacy part updates, and digitization) With proven expertise from designing aircraft components and systems, I ensure designs meet aerospace standards for accuracy, manufacturability, and performance. Available for freelance/contract projects remote or collaborative whether it's parametric modeling, complex assemblies, electrical integration, or reverse engineering legacy parts. Let's turn your concepts into manufacturable reality. Open to aerospace, automotive, defense, and industrial opportunities!"

I provide expert-level AutoCAD electrical drafting and MEP design services for contractors, architects, and engineering firms. I apply NEC code requirements to every drawing, ensuring designs are perm... Read more

I provide expert-level AutoCAD electrical drafting and MEP design services for contractors, architects, and engineering firms. I apply NEC code requirements to every drawing, ensuring designs are permit-ready and AHJ-compliant. Core Services: - Commercial Tenant Improvement (TI) Electrical Plans - Panel Schedules & Load Calculations (NEC Article 220) - Single-Line / One-Line Diagrams - EV Charger Load Studies (NEC Article 625) - Permit-Ready Drawings for Restaurants and Retail PRICING TIERS (based on project complexity): - Tier 1 Basic ($35-45/hr): Single panel schedules, simple load calcs, minor revisions - Tier 2 Standard ($55-65/hr): One-line diagrams, TI electrical layouts, small permit sets - Tier 3 Premium ($75-95/hr): Full permit drawing sets, EV load studies, multi-panel commercial projects Background: BS in Electrical Engineering, University of Washington. Located in Seattle, WA. Familiar with Washington State local code amendments. Fast turnaround. Technically precise. Clear communication at every stage.

I am an Electrical Engineering Designer and certified EIT with a unique advantage: I hold a Journeyman Electrician license. This allows me to design MEP systems that are not only technically precise b... Read more

I am an Electrical Engineering Designer and certified EIT with a unique advantage: I hold a Journeyman Electrician license. This allows me to design MEP systems that are not only technically precise but also optimized for real-world installation and NEC code compliance. With over 7 years of experience in commercial and industrial MEP design, I specialize in creating high-quality documentation that moves projects forward.My expertise includes developing and updating comprehensive MEP design packages, as well as creating accurate one-line diagrams and detailed plan drawings. I am experienced in equipment coordination, specifically reviewing power requirements for RTUs and water heaters to ensure proper circuiting. Additionally, I manage infrastructure upgrades by coordinating the integration of new transformers, electrical panels, and lighting systems. Leveraging my technical Spanish, I bridge the gap between engineering designs and field personnel to ensure seamless project execution. I am highly proficient in AutoCAD and pride myself on being an out-of-the-box thinker who ensures every design is accurate, compliant, and ready for the field.

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important tha... Read more

Do you need electrical engineering expertise? Hey there! For those of you who do not know me, my name is Nicholas. I am an Electrical Engineering Consultant, and I have something really important that I want to share with you today. For most of you reading this, hiring an electrical engineering freelancer or contractor has been a struggle to say the least. You have likely lost a great deal of money only to receive a sub-marginal product. Constant change orders, redraws, slow work, missed deadlines, failing “cross-functional” teams, no quality assurance, and huge bills are just a few examples. I would imagine that you are feeling very frustrated, confused, and maybe even a little humiliated. Does this sound about right? You are correct to be worried, because many people get screwed over when they hire an engineering contractor. But what if I told you there is one thing, just one thing you could do to flip the script? It is as easy as sending me a message on Cad Crowd. I am an American entrepreneur, electrical engineer, and trusted consultant. I am an accomplished expert with nearly a decade of experience in the electrical engineering industry. As a knowledgeable professional with experience in the nuclear industry, I have had serious involvement with numerous quality-dependent, critical power and control systems. Within five years of graduating from the prestigious Clarkson University with a Bachelor of Science Degree in Electrical Engineering, in addition to minors in both Computer Science and Mathematics, I obtained experience at a multinational technology company and also rapidly became a trusted, lead analytical engineer at Indian Point Energy Center. Today, I help individuals and entrepreneurs maximize their profits by increasing their technical expertise. Once we are both interested in working together on a project, before you even spend a penny, I offer a free, no-obligation video conference kick-off meeting to eliminate any reasonable doubt that we are a perfect match for each other. When working with me, you get to save money on high-quality services. If, like for many cash-constrained businesses, your budget is under scrutiny, you may be forced to rationalize your procurement model. Traditional consulting firms are just not agile enough to adapt. Red tape strangles engineers in many firms. Do not overspend on a wasteful system. Embrace the cost reductions! It is the only way to accelerate your growth and wealth! When working with me, you have access to a quick, easy, and convenient hiring process. In the engineering services sector, most businesses still rely heavily on localized industry experts, consulting firms, and in-house talent. These engineers are often experts, but their geographic proximity to their clients is more often their greatest fortune. The process for procuring my service is extraordinarily quick and simple. I embrace business flexibility. All you need to do is send me a brief message on Cad Crowd! When working with me, you get clarity and security. The payments involved are clearly defined upfront. You do not assume the risk that a firm might claim to be starting a project, take a deposit, and then not deliver. There is no reason not to act now. Your co-workers will rave about your success! When firms change engineers during the project, team turnover can put projects of any size at risk. Throughout the process, one or more team members leaving could result in a project failing if the knowledge and talent walk out the door. When working with me, you know that I am going to be the one working on your project from start to finish with an outcome driven mindset. Visit the link below now to check out my website and see why businesses come to me for solutions. I want to help you, but I am a busy guy and do not have much time to add additional projects to my plate. Do not wait until it is too late. Do not continue to struggle day to day to ensure your market dominance and make a sustainable profit. Everyone knows that we needed our independent expert opinion and design solutions yesterday. Make your life easier. Send me a message on Cad Crowd now to get your project started! I will talk to you soon.

I’m a CAD drafter with experience supporting engineering teams, contractors, and designers who need fast, accurate drawings. I specialize in 2D drafting, PDF-to-CAD conversions, redlines, as-builts, a... Read more

I’m a CAD drafter with experience supporting engineering teams, contractors, and designers who need fast, accurate drawings. I specialize in 2D drafting, PDF-to-CAD conversions, redlines, as-builts, and clean technical layouts. My background includes electrical design, industrial support, and construction documentation. I’m comfortable taking rough sketches, markups, or old PDFs and turning them into clean, professional CAD drawings ready for review or permitting. What I Can Help You With: PDF, image, or hand-drawn sketch → CAD redraws Redlines, markups, and revisions As-built updates Electrical plans (lighting, power, equipment layouts) Mechanical/industrial layouts General floor plans and technical diagrams File cleanup, layering, and standards alignment Why Clients Work With Me: Quick, reliable communication Fast turnaround without sacrificing accuracy Ability to handle incomplete or rough input Experience across construction, engineering, and manufacturing environments If you need clean CAD files delivered on time, I’m your guy. Send your PDF, sketch, or markup and I’ll get started right away.

Professional Engineer with a focus on MEP/Transportation. Design focus includes site electrical infrastructure, building interior electrical systems and electrical overhead and underground utility de... Read more

Professional Engineer with a focus on MEP/Transportation. Design focus includes site electrical infrastructure, building interior electrical systems and electrical overhead and underground utility design. Typical product includes construction drawings and/or calculations. Electrical design skills include the following: - Electrical equipment fit-out and specifications - Cable, conduit and equipment sizing, protection and installation - Site electrical utility layout and infrastructure - Construction cost estimation - Interior and exterior lighting design - Design compliance in accordance with the National Electric Code or National Electric Safety Code - Familiarity with public agency design standards and requirements Previous projects in the following sectors: - Parks and public spaces - Building restorations - New housing development - Streetscape and roadway improvements - Rail systems infrastructure - Electric utility infrastructure - Marinas - Decorative sign and structure lighting Based out of New York City area.

I have 20 years Electrical Design and Architectural support, and currently work under an Architect. I also do P&ID's and PFD's and quality PDF to Cad conversions.

I have 20 years Electrical Design and Architectural support, and currently work under an Architect. I also do P&ID's and PFD's and quality PDF to Cad conversions.

Hello, my name is Mike Baucom. I am seeking freelance 3d and 2d design and drafting work. I have over 5 years of experience in drafting/design, prototyping, and product development. Below is a more de... Read more

Hello, my name is Mike Baucom. I am seeking freelance 3d and 2d design and drafting work. I have over 5 years of experience in drafting/design, prototyping, and product development. Below is a more detailed summary. SUMMARY OF EXPERIENCE • 5 Years’ experience in the following fields below.• Junior Electrical Engineer, and 3D Drafting and design specializing in Offshore and Hazardous Location Environmental Control Units, Air Conditioners, Pressurizers, Gas Scrubbers, and Purge Units.• Time served in both electrical engineering and in a production factory setting as well as field service work performing trouble shooting, installation, and maintenance of electrical and HVAC systems.• Onsite with the end user and customers during their Factory Acceptance Testing and Evaluation.• Designing and Balancing brand new refrigeration systems.• Extensive experience in examining and testing elements of electrical systems to locate and troubleshoot faults with Electro-Mechanical, PLC, and VFD controls.• Proficient in installing new and modified electrical wiring and devices.• Technical sales experiences when speaking face to face with customers usually resulting in quotes and/or estimates to be generated.• Hands on experience in performing predictive and preventive maintenance.• Highly skilled in installing and wiring motors and motor control devices such as disconnects, relays, contactors and VFDs.• Thorough knowledge and understanding of applied trade practices and techniques such as NFPA 496, NEC 500, NEC 505.• Computer Skills include but not limited to all of Microsoft office, SolidWorks 2016, AutoCAD Inventor 2015, AutoCAD 2004-2013, and Adobe Suite.

▪Total of 10 Years CAD Drafting Experience -10 years modeling & drafting with SolidWorks -9 years modeling & drafting with AUTOCAD Mechanical -2 years modeling & drafting with FastCAD ▪5 Years E... Read more

▪Total of 10 Years CAD Drafting Experience -10 years modeling & drafting with SolidWorks -9 years modeling & drafting with AUTOCAD Mechanical -2 years modeling & drafting with FastCAD ▪5 Years Experience in Flight Simulation Design -control panels -cockpit structure -EIC boxes -manufactured parts & assemblies -screen printed artwork ▪2 Years Experience in Heat Exchanger Design -shutters -main structure -manufactured parts & assemblies ▪2 Years Experience in Industrial Metal Cutting Bandsaw Design -wheel covers -roller tables -manufactured parts & assemblies

Twenty-five years in Electrical, Mechanical, HVAC, I&C, Civil and Architectural Drafting and Electrical Design for a variety of industrial and commercial facilities including: Microelectronics, Restau... Read more

Twenty-five years in Electrical, Mechanical, HVAC, I&C, Civil and Architectural Drafting and Electrical Design for a variety of industrial and commercial facilities including: Microelectronics, Restaurant/Kitchen design, Hospitals, Colleges, off-shore drilling platforms, Office buildings, banks and fitness centers. Independent Electrical Designer with various engineering firms. Previous to that, owned own business in which I supervised several employees. Business ownership has afforded experience in Marketing, Project Management of teams and offices, Project Coordination and QC, business management, personnel management. I have punch-listed and provided extensive as-built’s in all kinds of buildings and environments. Willing and able to work independently. Proficient in both AutoCAD and MicroStation.