Hire CAD designers & engineers in Rio Rancho, New Mexico

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineer... Read more

Competencies Mechanical Engineering and Management of prototype projects from conception, through design, build, and testing phases. Frequent communication and coordination with other design engineering disciplines and technicians to complete objectives. Proficient utilization of Solidworks software to generate 3-D models of design concepts, and drafting engineering drawings for manufacturing and production. Research and Analysis of design ideas, specifications and manuals to determine feasibility and safety of design or application. Collaboration with Production personnel to ensure products and systems conform to engineering specifications. Use of CAE software, conducting virtual structural design iterations for identifying and remediation of potential design issues. Creation of drawings for communicating with production personnel, and generation of explanatory diagrams, technical files and bills of materials for production and reports. Procurement of cost effective parts and materials for projects, often working directly with in house and outside manufacturers on fabricating and building components. Conducting tests on prototype designs, operating all associated equipment and collecting relevant data for analysis. Authoring training manuals and training professional and technical staff on design or system use. Compiling and presenting research data into formats for scientific analysis, or customer reports. Professional Experience Mechanical Engineer NTS/MSI/Sierra Peaks Inc. Jan 2012 to Nov 2017 Hardware and Service Solutions 8436 Washington Place Albuquerque, NM 87113 http://www.sierrapeakstibbetts.com Lead Engineer, responsible for Production Management, and Technical Documentation of Harvester airborne nuclear particulate sampling pods for Sandia Labs/ Airforce (AFTAC) customer. Implemented an MRP inventory system to re-organize shop activities from the development of prototypes into producing multiple large pod systems. Functioned as primary focal point on engineering and technical issues. Supported and interpreted to Manufacturing, Investigated Engineering draw errors and corrected suitably. Wrote the ECOs and drafted the drawing changes for a complete deliverable design package to customer. Design and structural analysis of composite pod heat sink/strong back structure and composite enclosure for airborne camera payload of customer design. Successfully tested to IP67 customer requirement and delivered prototypes. Mechanical Engineer Adherent Technologies Inc July 2001 to Jan 2012 Development Laboratories 11208 Cochiti SE, Albuquerque NM www.adherent-tech.com Modernized outdated mechanical test equipment, as well as trained new personnel to complete destructive testing for evaluating mechanical properties of advanced composite materials. Results showed improved composite material properties achieved by chemist's formulas. Designed, manufactured and operated testing apparatus within ASTM specifications for collecting particulate emissions from catalytic wood stove designs. The results favorably compared new catalyst formulas to competing market products. Organized and managed the facility installation of a pneumatically operated, industrial distillation unit for solvent recovery for composite recycling process plant. Unit was successful, and safely operated. Designed and built structural support and developed operating procedures for a prototype 300 gallon acid digestion composite materials recycling reactor. The reactor is still operating and providing data for composite recycling research to this day. Analyzed the feasibility and implemented the re-purposing a salvaged reactor into a medium sized vacuum testing chamber for experiments with inflatable, foam injected, rigidizable-on-command space structures. Operated, collected data, and designed modifications to a large-scale gasification type tertiary recycling prototype plant. Improved critical heat exchanger designs. Designed, built and operated an experimental drop through plasma treatment chamber for etching surfaces of graphite flakes and carbon nanotubes for use in advanced composite material research. Created a synchronized jack screw system for rapidly opening heat treatment ovens to facilitate faster re-threading and increase production of line involved in composite fiber finish application and powdered tow pre-impregnation. Developed servo controlled gate valves for a feedback control method utilizing laser interferometers for controlling powder flow deposition onto composite fibers. Contributed to the scientific and technical innovation with mechanical test results and visual diagrams and pictures, approved for publication as a NASA Tech Brief, entitled Light Curing Structural Repair Tape for In-Space Repair. Mechanical Engineer Civilian Service, C-5 Engineering September 1999 to June 2001 Warner-Robins Air Force Base, Georgia Q-Clearance obtained (expired) Evaluated and solved engineering problems in a depot level aircraft repair facility, specifically working on maintaining and repairing the oldest prototypes of the heavy lifter fleet of C-5 military aircraft. Designed and interpreted for mechanics any non-standard airframe structural repairs. Worked with fabricators in creating repair fittings and addressing manufacturing issues. Education Bachelor of Science, Mechanical Engineering 1995-1999 University of New Mexico Albuquerque, NM Graduated with Honors Skills Computer aided engineering with 3-dimensional modeling and documenting software Solidworks, Solidworks Workgroup, Pro-E, Autodesk, Spaceclaim, Sketchup Ansys Simulation Software, Workbench Platform, Structural Mechanics, Statics, Heat Transfer Caedium Computational Fluid Dynamics Software Microsoft Office Suite Products I can play a guitar and harmonica, operate a slide rule and solve a rubics cube. References Available upon Request

Professional freelancer since 2021. Experience creating and managing a database with >1000 complex mechanical drawings. Experience with animatronics, industrial parts/assemblies, cabinetry, furniture,... Read more

Professional freelancer since 2021. Experience creating and managing a database with >1000 complex mechanical drawings. Experience with animatronics, industrial parts/assemblies, cabinetry, furniture, architecture, and landscaping. Well rounded understanding of design and manufacturing. Able to take conceptual ideas and create a working model. Able to take notes/hand drawings/photos and turn them into professional 2d or 3d models. Excellent communication and thorough attention to detail. Able to learn, solve problems, adapt.

I am a mechanical engineering student at New Mexico Tech with 6+ years of experience in SolidWorks and Autodesk Inventor. Along with my CAD experience, I have worked in the manufacturing industry so I... Read more

I am a mechanical engineering student at New Mexico Tech with 6+ years of experience in SolidWorks and Autodesk Inventor. Along with my CAD experience, I have worked in the manufacturing industry so I know how things work in the real world and can design accordingly.

For the past 15 years I have been creating and improving design solutions for consumer and industrial costumers . I have used extensively SolidWorks, Pro/ENGINEER, Autodesk Invento, Keyshot, CNC and... Read more

For the past 15 years I have been creating and improving design solutions for consumer and industrial costumers . I have used extensively SolidWorks, Pro/ENGINEER, Autodesk Invento, Keyshot, CNC and rapid prototyping systems to generate new products. I can help you planned and developed your project from concept to prodcution.

Highly motivated and energetic mechanical engineering professional leader with 25+ years’ experience converting abstract ideas into products for consumer, industrial, R&D, military and aerospace appli... Read more

Highly motivated and energetic mechanical engineering professional leader with 25+ years’ experience converting abstract ideas into products for consumer, industrial, R&D, military and aerospace applications. Technical leadership directing team members on the execution of product development from concept to delivery. Broad knowledge of planning and design techniques for a wide range of manufacturing processes, one-off products and production products for both high-mix-low-volume and high-volume production environments.

Graduated BS EE at a renowned Boston University. Extensive lab experience in both low and high voltage/power/and frequency applications. Experienced in Military grade circuit board design, fabrication... Read more

Graduated BS EE at a renowned Boston University. Extensive lab experience in both low and high voltage/power/and frequency applications. Experienced in Military grade circuit board design, fabrication, and documentation

Highly driven student of architecture, pursuing my degree and licensure. Experienced in drafting, design, and graphic arts.

Highly driven student of architecture, pursuing my degree and licensure. Experienced in drafting, design, and graphic arts.

Worked in a variety of manufacturing fields. My skillsets are Welding, Journeyman Pipe Fitting, Machinist, CNC Programming, Aerospace/Aviation Jig and Fixture Builder. Also, have done some Architectur... Read more

Worked in a variety of manufacturing fields. My skillsets are Welding, Journeyman Pipe Fitting, Machinist, CNC Programming, Aerospace/Aviation Jig and Fixture Builder. Also, have done some Architectural drafting in the past. Started modeling with Fusion 360 about 2 years ago for an aircraft repair center CNC programming. With my background, I conceptualize easily from 40 years+ of manufacturing stuff. I am soon to retire.

I have been using 3D software for 7 years now with 4 years using SolidWorks. I achieved my CSWP certification a year ago.

I have been using 3D software for 7 years now with 4 years using SolidWorks. I achieved my CSWP certification a year ago.

With the software I have available I can create models, assemblies, and drawings for any and all projects. I’ve worked in different industries including aerospace, national defense, and power generati... Read more

With the software I have available I can create models, assemblies, and drawings for any and all projects. I’ve worked in different industries including aerospace, national defense, and power generation. Current role is in the power generation field and is a prototype position which includes the design and construction of prototype designs. I also run FEA and take care of analysis for different aspects of designs although the software I have available for contract work is strictly modeling and drawing related. I am available for FEA consultation for static simulations.

I'm an experienced design specialist skilled in both conceptual and mechanical design (3D models and professional technical drawings) for products, parts and assemblies across a wide array of industri... Read more

I'm an experienced design specialist skilled in both conceptual and mechanical design (3D models and professional technical drawings) for products, parts and assemblies across a wide array of industries. I am also a part owner of a precision CNC machining and manufacturing company and can facilitate prototyping and production services by a skilled team of machinists who have well over a century of combined experience. In addition to mechanical design and manufacturing, I am also well experienced at producing professional, eye-catching packaging and marketing/branding content, to include obtaining product GTINs and incorporating barcodes into printed packaging. Let's collaborate and take your idea from concept to reality and into the hands of your customers! Some of my capabilities: -10 years of mechanical design experience -Can provide 3D Models and Technical Drawings designed to your specs -Can assist you in proper tolerancing and establishing dimensional requirements for a manufacturable & operational part -Can advise in material and hardware selection considering cost, use, and manufacturability -Can easily arrange prototyping and production of finished parts and assemblies -Can help you brand and market your product and company through professional packaging and content design, including barcodes (skilled in Adobe Suite products such as Photoshop & Illustrator). -Can help you write technical and and user manuals, instructions, etc. -Will keep in regular communication throughout the scope of your project. -Will maintain a professional, committed, and helpful working relationship with all clients. -Will keep your proprietary data safe and secure. -Will operate diligently and efficiently to provide deliverables within or before deadlines

Solidworks Certified Associate. Technical: Part 107 Remote Pilot, SolidWorks CSWA, ANSYS, Optimum Kinematics, Deere excavator and utility tractor controls, GIS Mapping, MATLAB, Simulink, soldering, m... Read more

Solidworks Certified Associate. Technical: Part 107 Remote Pilot, SolidWorks CSWA, ANSYS, Optimum Kinematics, Deere excavator and utility tractor controls, GIS Mapping, MATLAB, Simulink, soldering, multi-chemistry battery charging, electronics calibration, wrench turning, assembling and disassembling of complex systems, Microsoft programs, ATSA exam prepped, Nav-Map flight planning, 3D printing, Bambu Studio, Protomax water jet. Machining: Lathe (tapping, die threading, drilling, facing, grooving, parting off, knurling, taper turning), Mill (face milling and contour milling), CNC (created drawings and step files for CNC machinists). Project Management: Coordinated municipal projects, ensuring safety and regulatory compliance. Professional: Teamwork, leadership, verbal communication, time management, adaptability, critical thinking, instruction follower, and leader Manufacturing & Fabrication: Machined components, manufactured A-arms, threaded inserts, conical inserts, spacers, bearing housings for press-fit bearings, mounting tabs. Performed water-jet programming, sanding, grinding, press fitting bearings, drilling, aligning, and precision measuring using dial calipers and digital readouts for lathe and mill. Created engineering drawings and STEP files for CNC machining. Software & Analysis: Utilize SolidWorks for part modeling, design tables, assemblies, and collision detection. Conduct finite element analysis (FEA) using ANSYS for structural validation. Teamwork & Communication: Collaborate with a 40-person team using Slack, weekly meetings, and daily workshop coordination. Ordering and scheduling logistics.

I am a Mechanical Engineer with 7 years of experience. Much of this time has been spent working in SolidWorks, modeling new parts and making redesigns to existing parts.

I am a Mechanical Engineer with 7 years of experience. Much of this time has been spent working in SolidWorks, modeling new parts and making redesigns to existing parts.

Looking for 3D modeling and 2D drawing work. I have experience with many solid modeling softwares and I have a B.S. in Mechanical Engineering.

Looking for 3D modeling and 2D drawing work. I have experience with many solid modeling softwares and I have a B.S. in Mechanical Engineering.

AutoCAD drafter that can draw a 2D project and tranform it into a 3D Rendering. Above average knowledge of AutoCAD & Sketchup, alongside experience with 3DS Max, Vray Rendering software, Revit and Unr... Read more

AutoCAD drafter that can draw a 2D project and tranform it into a 3D Rendering. Above average knowledge of AutoCAD & Sketchup, alongside experience with 3DS Max, Vray Rendering software, Revit and Unreal Engine.

Passion for design, brainstorming and finding solutions.

Passion for design, brainstorming and finding solutions.

I am an old guy with nothing but time because I am in a wheelchair and can't talk. So I have an excuse to play on the computer all day :>) I model in plasticity and Zbrush and have a background in ar... Read more

I am an old guy with nothing but time because I am in a wheelchair and can't talk. So I have an excuse to play on the computer all day :>) I model in plasticity and Zbrush and have a background in art/engineering/maker. I can do mech/organic/etc. https://www.printables.com/social/9940-dansfoundry/about follow this link to see some of my work

Zia Later Junk & Trash Removal, providing the reliable Junk Removal Services near Albuquerque NM. Our experienced team offers efficient and Eco-friendly solutions for all your junk removal needs. Say... Read more

Zia Later Junk & Trash Removal, providing the reliable Junk Removal Services near Albuquerque NM. Our experienced team offers efficient and Eco-friendly solutions for all your junk removal needs. Say goodbye to unwanted items with ease and reclaim your space today.

I am an architectural drafter with 30 years of experience in residential and light commercial design. I possess a general design concept that enables me to complete any project, provided I receive dir... Read more

I am an architectural drafter with 30 years of experience in residential and light commercial design. I possess a general design concept that enables me to complete any project, provided I receive direction on guidelines, details, and efficient professional involvement with architects and engineers.

I am a Architectual/Engineering Drafting Technologies student. I have two terms left before I earn my Associates Degree.

I am a Architectual/Engineering Drafting Technologies student. I have two terms left before I earn my Associates Degree.

Experienced in drafting and design of bridges and hydraulic structures. Familiar with requirements of the construction industry

Experienced in drafting and design of bridges and hydraulic structures. Familiar with requirements of the construction industry