Hire CAD designers & engineers in Mount Pleasant, Arkansas

I've been doing AutoCAD Design for over 10 years now. My experience is in the engineering/architecture field. I worked for a few engineering firms in NYC, one doing MEP work and the other was a fire... Read more

I've been doing AutoCAD Design for over 10 years now. My experience is in the engineering/architecture field. I worked for a few engineering firms in NYC, one doing MEP work and the other was a fire alarm contractor. I've also with a quite a number of design firms, Audio/Visual co., IT/Telecom, Civil, Tilt-up construction, Precast concrete and have also been a private AutoCAD tutor.

I have more than 30 years of experience in the manufacturing field with a focus on medical product development including equipment design and process development. I have spent the last 4 years workin... Read more

I have more than 30 years of experience in the manufacturing field with a focus on medical product development including equipment design and process development. I have spent the last 4 years working as a consultant doing both medical device product design as well as designing automated assembly and test equipment. For the medical device design, a major portion of the work involved identifying and qualifying manufacturing partners that would be used and then implementing manufacturing procedures and processes as required. I would work with the vendors to identify cost effective plans for startup manufacturing and develop prototypes that allowed us to verify design intent as well as test and verify production methods and procedures. I also worked with the vendors to establish a longer term ramp plan as quantities to be produced increase. My consulting work also included designing and building several pieces of semi-automated assembly and test equipment for use in clean rooms by medical device manufacturers.

I graduated from the University of Arkansas in the Spring of 2016 with a BS in Biomedical Engineering with Pre-Med distinctions. I hold minors in English, History, and Mathematics. While attending Uni... Read more

I graduated from the University of Arkansas in the Spring of 2016 with a BS in Biomedical Engineering with Pre-Med distinctions. I hold minors in English, History, and Mathematics. While attending University I contributed part time as an Undergraduate Research Assistant for Dr. Narasimhan Rajaram Ph.D. in the development of optical imaging instrumentation and biomarkers for cancer diagnosis and monitoring tumor response to therapy. My primary curriculum focus included Neurology, Nano technology, Advanced Prosthesis, and integration of bio technologies involving the neurological pathways, 3D design, 3D printing, CAD drafting, Structural engineering, and Mechanical Engineering techniques. I currently hold the position of Design Engineer for Berkley Industries. My primary focus is developing new and innovative mechanical and Industrial devices for a myriad of clients for a variety of needs. I previously held the position of Principle Design Engineer for R&R Solutions in Gravette Arkansas. I oversaw in charge all engineering projects, and custom design projects from the initial concept to the production run. I had the privilege of holding a position with NX Utilities as the Regional Quality Engineer for the Midwest. I planned and directed activities concerned with development, application, and maintenance of quality standards for industrial design , materials, and products related to the fiber optic network pathways for major utility conglomerates. Before my NX days, I held the title of Engnieer/Designer for Advanced Lightening Technologies. I lead a team focused on R&D of advanced lightning protection systems using CAD and scale model simulations. In my spare time I enjoy being with my family, traveling to new places, country dancing, playing as many sports as possible, and the occasional Netflix binge.

While self taught, I have had the beneficial experience of being the son of a machinist/cnc programmer. My interest in CAD first came in the form of video game art. I worked briefly as an artist for B... Read more

While self taught, I have had the beneficial experience of being the son of a machinist/cnc programmer. My interest in CAD first came in the form of video game art. I worked briefly as an artist for Bohemia Interactive Studios, where I was involved in the Arma series games and their VBS simulator projects. I quickly learned though, that game art wasn't what I wanted to do. Since then, under the influence of my father, my brother purchased a Bridgeport Boss 4 CNC. My father and I spent a good amount of time through trial and error retrofitting that machine to full CNC. Now I use Rhino4 and madCAM, along with that Bridgeport, to design, prototype, and manufacture rifle components. The skills I'm acquiring by this, I think are unique because it gives me the perspective of manufacturing in my designs. I think this really goes a long way in helping me design more practically. Without a formal education, I know that there is much room for improvement. I also know that I've had pretty unique life experience associated with the course of my projects.

Mechanical Engineering Student Medical Research Lab CAD specialist I love and have a strong passion for creating things with CAD software!

Mechanical Engineering Student Medical Research Lab CAD specialist I love and have a strong passion for creating things with CAD software!

Born in Africa educated in Africa, France, Switzerland, and U.S.A, Ecole des Ingénieurs de Genève, Madison Area technical college, University of Wisconsin, Gemological Institute of America, American... Read more

Born in Africa educated in Africa, France, Switzerland, and U.S.A, Ecole des Ingénieurs de Genève, Madison Area technical college, University of Wisconsin, Gemological Institute of America, American Institute of Diamond cutting, Inc. Gemvision CAD training Center Iowa, Work for Ministry of Public Work, Projet Field Inspector( CAR ) Yangou Diamants Mining and diamonds buying ( CAR ) Jewelry studio owner ( Madison WI ) Lead Jewelry designer for a major national jewelry manufacturer and jewelry trunk show. ( Metro Atlanta GA ) Present : Co owner, Atlantic Fine Woods. Decatur GA Furniture and Wooden product design and Manufacturing Owner AFW design, Tucker GA CAD/CAM Jewelry Showroom and Workshop

Senior mechanical designer, product development engineer, program manager and engineering director with 20+ years of Solidworks experience. In my career, I have been part of launching hundreds of new... Read more

Senior mechanical designer, product development engineer, program manager and engineering director with 20+ years of Solidworks experience. In my career, I have been part of launching hundreds of new products either from the design aspect or leadership side of the launch. My inventiveness and meticulous attention to detail have lead to many very successful products in different markets including fleet and forestry. Some of these designs have been granted US, CA, AU and EU patents as well as other patents pending. In addition, several of my 3D printing designs have been shared on Thinginverse with many downloads as well as remixes. With the support of local fabrication shops and in-house 3D printing, I am able to turn around many prototype designs fairly quickly. If you're looking for drafting, mechanical design or mechanical design all the way through prototyping, I'm the person that can help you out!

Senior BIM Specialist with 20+ years of architectural and structural drafting experience, including deep expertise in unitized curtainwall systems and high-profile commercial projects such as U.S. Ban... Read more

Senior BIM Specialist with 20+ years of architectural and structural drafting experience, including deep expertise in unitized curtainwall systems and high-profile commercial projects such as U.S. Bank Stadium (Minneapolis) and Arkansas Children's Hospital. Equally comfortable producing fabrication-ready shop drawings, building reusable Revit families, and coordinating clash-free models inside multidiscipline teams. Proven remote-work track record on enterprise BIM deliverables. Currently expanding capabilities into structural detailing while seeking a senior individual-contributor role on complex commercial, mission-critical, or specialty-envelope projects.

Project Engineer with multiple mechanical design projects completed. I can provide electrical controls and PLC programming as well.

Project Engineer with multiple mechanical design projects completed. I can provide electrical controls and PLC programming as well.

Hello, I am a professional Mechanical Engineer with 8 years of experience in all facets of Engineering and CAD Design. I live in Boston, MA and I am looking for remote freelance work as an Engineer/D... Read more

Hello, I am a professional Mechanical Engineer with 8 years of experience in all facets of Engineering and CAD Design. I live in Boston, MA and I am looking for remote freelance work as an Engineer/Designer. I have a wide variety of experiences and no job is too big or too small for me. I am excited to join this network and start challenging myself with new and interesting projects. Please take a look at my portfolio and message me with any questions you may have. Thank you very much!

Just now getting into design work but willing to put in the work to get the best results. Just let me know what’s needed to be done and I’ll do my best

Just now getting into design work but willing to put in the work to get the best results. Just let me know what’s needed to be done and I’ll do my best

Enjoy all aspects of good designing from - identifying a problem - finding the root cause -reverse engineering a solution -AND DESIGNING!!!! Good designing requires a good designer, but great design... Read more

Enjoy all aspects of good designing from - identifying a problem - finding the root cause -reverse engineering a solution -AND DESIGNING!!!! Good designing requires a good designer, but great designing requires a great team. Let me work with you so we can make the next great thing!

Currently the Engineering Manager at an aluminum extruder. I assist customers with design changes based on form, function, and manufacturability. My major role is to supervise Engineering staff and ap... Read more

Currently the Engineering Manager at an aluminum extruder. I assist customers with design changes based on form, function, and manufacturability. My major role is to supervise Engineering staff and approve mechanical drawings for production. I am responsible for using our 3d printers to provide samples to customers of their products to prove out their designs.

I am a Performance-driven Full-Stack and Blockchain Developer specializing in architecting modern web applications and decentralized solutions. I bridge the gap between high-end aesthetics, complex te... Read more

I am a Performance-driven Full-Stack and Blockchain Developer specializing in architecting modern web applications and decentralized solutions. I bridge the gap between high-end aesthetics, complex technical logic, and secure on-chain functionality. I focus on turning static concepts into high-performing digital products with a priority on speed, scalability, and security

I am a seasoned mechanical design engineer with 5+ years of design experience. I am proficient in Solidworks and AutoCAD. My experience includes machine design, weldments, and sheet-metal design. I... Read more

I am a seasoned mechanical design engineer with 5+ years of design experience. I am proficient in Solidworks and AutoCAD. My experience includes machine design, weldments, and sheet-metal design. In addition to my design experience I have been a CAD instructor at my local commuinity college for 4+ years. I am a native English speaker and I have lived in the United States all my life.

I currently work for a company that specializes in industrial refrigeration. I was a CAD instructor at a 3 county vocational school for 25 years where I taught high school students Cad architectura... Read more

I currently work for a company that specializes in industrial refrigeration. I was a CAD instructor at a 3 county vocational school for 25 years where I taught high school students Cad architectural and Mechanical Drafting. Before that I worked for a parking meter company as a cad and board design drafter. I have freelanced for over 15 years in Architectural residential drafting, patent drawings, and Mechanical drafting. And I am ADDA Certified in both Architectural and Mechanical drafting. I must admit, I love to draw.

If you need an engineer to take your idea and produce a functional design/prototype, your likely reading the right profile. Services I offer: 1. Rapid prototype development 2. CAD design (3D, 2D, ren... Read more

If you need an engineer to take your idea and produce a functional design/prototype, your likely reading the right profile. Services I offer: 1. Rapid prototype development 2. CAD design (3D, 2D, renders, animations, etc..) 3. Hardware programming (Arduino, ESP32, Raspberry PI, etc..) 4. PLC programming. (Brands: Click, Productivity, Unitronics, and DoMore) 5. Electrical design 6. 3D printing 7. Fabrication and testing in-house 8. Willing to travel for installs, testing, proofing, and assembly of machinery. 9. Much more... With experience producing custom products that range from toys to industrial equipment, I am accustomed to working on many product types. With a well-stocked inventory, I am typically able to offer functional plug-n-play rapid prototypes built and delivered with fast turnaround options available. Please feel free to reach out to setup a free meeting to dicuss your project. Cheers, Jared.H

3D Modeling and Design, as well as Graphic Design and Illustration. I have 6 years experience as a project manager, in which I have developed my skills in organization, time management, and prioritiza... Read more

3D Modeling and Design, as well as Graphic Design and Illustration. I have 6 years experience as a project manager, in which I have developed my skills in organization, time management, and prioritization.

Hello, my name is Parker. I’m currently finishing up my final semester in the Engineering Technology program at Arkansas State University. I have an emphasis in CADD. I am proficient in AutoCAD, Inven... Read more

Hello, my name is Parker. I’m currently finishing up my final semester in the Engineering Technology program at Arkansas State University. I have an emphasis in CADD. I am proficient in AutoCAD, Inventor and Solidworks.

From drafting homes to immersive worlds, at Jones’s Burrow & Books, we don’t just draw lines, we create the foundation for architectural brilliance. Join us on a journey where your ideas take shape wi... Read more

From drafting homes to immersive worlds, at Jones’s Burrow & Books, we don’t just draw lines, we create the foundation for architectural brilliance. Join us on a journey where your ideas take shape with precision, clarity, and a touch of creative flair. Not only do we work with architects, contractors, and homeowners, but our team is also open to working with other creatives in bringing their creative visions to life. Whether you’re an author seeking a tangible representation of your fictional world or a creative mind looking to turn your ideas into captivating structures, we are here to transform your concepts into stunning architectural designs.

Experienced engineer with over 10 years experience as a product development design engineer. I utilize the latest version of SolidWorks 3D modeling software to build, analyze, test and generate profes... Read more

Experienced engineer with over 10 years experience as a product development design engineer. I utilize the latest version of SolidWorks 3D modeling software to build, analyze, test and generate professional engineering drawings. I also assist in the prototype phase in order to make sure that first article built is errors free and is ready for next phase of production. EDUCATION San Jose State University, San JoseBachelors, Mechanical Engineering, 2000Design concentration. Sierra Academy of Aeronautics, Oakland, CACertificate, Technician, 1992 EXPERIENCE Fluid Components International, CaProduct Development Engineer 08/2010 – Present• Design and test new enclosure assembly for new product. • Conduct preliminary testing for CRN, FM and ATEX approvals.• Responsible for generating engineering drawings.• Supervise SolidWorks drafter. Flowserve Co, Vernon, CaProject Engineer 05/2006 – 04/2009• Study customer data sheet and scope of supply. • Generate pump configuration layout and initiate an engineering design review (phase gate 2). • Interface with project managers, customers and vendors throughout the project cycle.• Troubleshoot all incurring issues during the build phase ECO’s, NCR’s, SDR’s.• Use Agile (Product Lifecycle Management) to create & update parts, drawings and BOM’s.• Collaborate with engineering group to streamline design process and lower cost of reworking pumps after testing. Energy innovations, Pasadena, CaMechanical Engineer, 10/2005-01-2006• Collaborated in refining and redesigning components of state of the art solar panel.• Used Solidworks and PDMworks to process and document drawings. Wetdesign corp, Burbank, CaMechanical Engineer, 01/2005 – 08-2005• Involved in the design and development of a water delivery, from concept to prototype to single article using Solidworks 3D design package.• Interface with material engineers to choose the right material for bearings, shaft, gaskets, etc.• Continued involvement with multiple projects. Fluid research, Tustin, CAMechanical Engineer, 06/2004 - 01/2005• Designed a new dispensing machine.• Rework the design and configuration of our most (single shot dispensing machine).• Help design engineering team transition from 2D to 3D drawings using Solidworks design package software. Tegal Corporation, Petaluma, CAMechanical Engineer, 01/2001 - 08/2001• Re-configured system design to accommodate newer parts and components.• Used Co-Create 3D CoCreate Solid Designer to check for interferences, accessibility and control.• Designed test fixtures for high vacuum plasma deposition chamber.• Helped with system design and reconfiguration to meet customer specifications. Ross Cook, San Jose, CAMechanical Engineer, 09/1999 - 11/2000• Developed design concepts in vacuum systems.• Performed analysis and calculations prior to design of particular pump or compressor.• Converted and organized 2D drawing into 3D CAD models using SolidWorks.• Used FEA (COSMOS) software to predict the vibration of compressor shaft at different loads. • Tested units according with ASME standards.Turner Design Corporation, Sunnyvale, CAAssociate Mechanical Engineer, 03/1998 - 09/1999• Presented alternative designs to engineering staff and clients, establishing acceptance of new methods and standards.• Performed design, drafting of components using SolidWorks 3D CAD software to create assembly drawings, and 2D drawings.• Implemented ECO/BOMs.United State Navy Reserve, Santa Clara, CAAircraft Maintenance Technician, 10/1993 - 10/1998• Maintained C130 transport planes.• Aided a team of ground support of A6 intruders at Top Gun Miramar, San Diego.• Participated in two missions: Sigonela, Italy and Atsugi, Japan. ADDITIONAL SKILLS• Computer Skills: SolidWorks, CoCreate Solid Designer, AutoCAD 2000, C++, HTML, Microsoft Office, AS/400• Languages: Fluent in Arabic/French/English LICENSES AND CERTIFICATIONS• Airframe & Power plant (A&P) tech - Sierra Academy PROFESSIONAL AFFILIATIONS• Member - American Society of Mechanical Engineers (ASME)

My main experience is creating mechanical 3D Designs I work with entrepreneurs and inventors to create prototypes and technical drawings for patent applications

My main experience is creating mechanical 3D Designs I work with entrepreneurs and inventors to create prototypes and technical drawings for patent applications

I have much experience with mechanical design. I have worked for an Industrial Technology department at a college doing CAD. I have worked for a well-known lawn mower company as a zero-turn mower desi... Read more

I have much experience with mechanical design. I have worked for an Industrial Technology department at a college doing CAD. I have worked for a well-known lawn mower company as a zero-turn mower designer. I have strengths in math, mechatronics, technology, and creativity.

Infrastructure Technical Specialist I am Joseph Duff, a surveyor at heart with a mind for civil engineering. I am an applications engineer for an Autodesk reseller here in North Little Rock, Arkans... Read more

Infrastructure Technical Specialist I am Joseph Duff, a surveyor at heart with a mind for civil engineering. I am an applications engineer for an Autodesk reseller here in North Little Rock, Arkansas (ATG USA, Inc). I provide technical assistance, pre-sales technical proof, business process analysis, software training and implementation, product demonstration, and other technical business services to civil engineering firms, heavy highway construction, and land surveying companies who fall under the broad umbrella of the civil/infrastructure industry. I do not know anything about coding, though. My expertise is within the industry itself. Therefore, just knowing the software has never been enough. I also have 10 years of real-world and hands-on industry experience in transportation engineering, civil site design, residential development, and boundary and construction surveying and layout. I love it! It is not hard for me to find enjoyment from this current project (job) because I get to travel, connect and network with a lot of new people and companies, and the work environment is ridiculously laid back, fun, and nerdy. I could see myself retiring doing thing.

I specialize in making 3d printable models, compliant mechanisms, moving joints, and possable figures. I also model Mecha

I specialize in making 3d printable models, compliant mechanisms, moving joints, and possable figures. I also model Mecha

AEC Professional, specialized in Revit with 20 years of experience moving companies from 2D to 3D. Currently maintain licensing for AutoDesks AEC Collection, AutoDesk Construction Cloud and On-Shape.

AEC Professional, specialized in Revit with 20 years of experience moving companies from 2D to 3D. Currently maintain licensing for AutoDesks AEC Collection, AutoDesk Construction Cloud and On-Shape.

Multi family residential to industrial manufacturing facilities, I have completed projects start to finish in all 3 disciplines. 20 years with one firm as MEP Designer with AutoCad.

Multi family residential to industrial manufacturing facilities, I have completed projects start to finish in all 3 disciplines. 20 years with one firm as MEP Designer with AutoCad.