Hire Local CAD Designers near Moreno Valley, California

Experienced in 3D CAD modeling in Fusion 360, Solidworks, Inventor, and OpenSCAD Contact for CAD and design services in Fusion 360 or Inventor

Experienced in 3D CAD modeling in Fusion 360, Solidworks, Inventor, and OpenSCAD Contact for CAD and design services in Fusion 360 or Inventor

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Anal... Read more

Electrical Engineering Professional with over 3 decades of experience in the System-Level Architecture and Design of Radio Frequency (RF / Microwave / mmWave), Power Conversion (Linear and SMPS), Analog Mixed-Signal, Quantization and Linearization, Phase Lock Loops (PLLs) and Servo Control Systems, Motion-Control (Robotics), Digital Logic (FPGAs) and State Machines, Embedded (MCU, CPU, GPU, DSP, SoC), Electro-Magnetics (EMC), Electro-Optical (Video delivery, Displays, High Resolution Visible / IR / UV Cameras), and Electro-Mechanical disciplines for Space, Aerospace, Military, Defense, Aviation (Avionics), Medical, Marine, Automotive, Locomotive, Transportation, Industrial, Consumer, Wearables, Commercial, High Performance Computing, Data Communications, LAN/SAN/WAN, Telecommunication, Wireless Charging & IoT Sensors, Radio, Broadcast, and Motion Picture industries

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the... Read more

To make a long story longer, I used to be a diesel engine technician. It was a career that I thoroughly loved and enjoyed, but the overall physical fatigue and demands from that line of labor had the potential to limit my future well-being. The decision to pursue a degree in mechanical engineering was a logical solution to replicate this enjoyment from working on engines, but also a decision that would provide better future career opportunities. My academic endeavor was less-than conventional, as I was also responsible for a mortgage and funding my own tuition. Although I am married, I am not the type of individual to rely entirely upon my wife with the burden of financial assistance. An unfortunate result of my stubbornness is the notion of accepting an internship, as it could provide an obvious educational value but lacked necessary financial requirements. My participation in on-campus race car teams provided the perfect opportunity to obtain design experience, and to promote these designs in a competitive environment.

3D CAD designer, concept to production prototype engineer, creative, and problem solver. If you're an entrepreneur looking to get professional renderings done for marketing purposes, you need a printe... Read more

3D CAD designer, concept to production prototype engineer, creative, and problem solver. If you're an entrepreneur looking to get professional renderings done for marketing purposes, you need a printed prototype to test, or you need to take a prototype to full-scale production, I have experience with each. I'm flexible on my rate depending on the job and typically spend more time than I bill to make sure my clients are 100% satisfied.

Im Mechanical Designer with experience building machinery, fixtures and jigs using CAD softwares. More than 10 years of experience in the industry of consumer electronics and plastic molding injection... Read more

Im Mechanical Designer with experience building machinery, fixtures and jigs using CAD softwares. More than 10 years of experience in the industry of consumer electronics and plastic molding injection area. *Knows of GD&T and Safety machinery methodology *Full projects management from start to finish *Strict communications with client, for me its very important for a total satisfaction.

Experienced Helicopter Maintenance Engineer with 20+ years in helicopter component maintenance. For the past 4 years, active in aircraft component design and certification. Skilled in airworthiness co... Read more

Experienced Helicopter Maintenance Engineer with 20+ years in helicopter component maintenance. For the past 4 years, active in aircraft component design and certification. Skilled in airworthiness compliance, technical documentation, and regulatory processes. Seeking opportunities in aircraft component design and certification.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Student Manufacturing Engineer, Experienced 3D modeler (Since 2011). Can do everything​ from piece parts to animated and rendered assemblies. Full time Student, part time nerd.

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience wo... Read more

Welcome to 3rDimension Engineering. I have a bachelor’s degree of science in mechanical engineering from USC and I reside in Los Angeles. I happen to be a relentless problem solver with experience working with Solidworks to produce 3D models and technical documentation for components and assemblies. I recently developed prototype robot grippers for various robotics and factory automation systems with Numatic Engineering. These projects required careful measurement and analysis which led to 3D modeling that was often used to produce drawings for manufacturing or support. In many cases I used 3D printing to create fast, economical, functional prototype components for use in live automation demonstrations. Due to my interest and success in producing 3D modeling and mechanical documentation using Solidworks, I have decided to freelance my skills to further increase my experience and capabilities. I offer the following services using Solidworks: -3D modeling of components and assemblies -Mechanical Drafting of components and assemblies using rectangular tolerance (GD&T offered for certain projects) -FEA Reporting available for components (displacements, 1st principle stresses, VM stresses) -Frequency Analysis Reports available for components

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

I am a mechanical engineer from a top ranked university with extensive experience with 3-D modeling using SolidWorks and computerized simulations. Let's create!

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: En... Read more

A Mechanical Engineer with two and a half years of manufacturing work experience, specializing in process improvement, product development, visual design, and team management. Key Competencies: Engineering Materials, Statistics & Probability, Manufacturing Operations, Dimensional Analysis, Modelling, 3D CAD, Test Analysis, Communication, Prototype Development, Design Improvements and Optimization, Machining and Fabrication Process, Project Management, Materials Research, Troubleshooting, Fabrication, Modeling Contact Daniel regarding design and manufacturing engineering opportunities.

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Mode... Read more

Cornell University Architecture graduate with previous work experience at both high end residential firms and larger companies like Gensler performing work ranging from Construction Documents, 3D Modeling, and Architectural Visualizations. Currently working at Tesla.

3D modeling is one of my passions. The composing music. Both allow me to be creative. I enjoy both hard surface and organic modeling. I also love texturing, and using a PBR (Physically Based Rendering... Read more

3D modeling is one of my passions. The composing music. Both allow me to be creative. I enjoy both hard surface and organic modeling. I also love texturing, and using a PBR (Physically Based Rendering) workflow. I'm a pro with Keyshot, and love to get my renders looking as realistic as possible. I'm also a freelance 3D illustrator for ShutterStock and AdobeStock with over 2,700 images in my catalogue.

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resource... Read more

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resources, provides an exemplary level of client service through a streamlined, creative and efficient approach to every project. Hands-on and detail oriented, comfortable working with surveyors, engineers, scientists and on unique teams finding cost effective methods for getting projects off the ground and through the pipeline. • Proficiency in Autocad and Solidworks 2017 and newer • Designs include part design and assemblies with prints • Mechanical, architecture, and some electrical architecture • Knowledge of innovative drafting methods • Visually communicative • Familiar with steel welding fabrication practices

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D f... Read more

I have 7 years of experience in freelance design for local freelancers. My skills include AutoCAD, SketchUp, Autodesk Revit, Navisworks, Vray, and Electrical Drafting. I specialize in: ✅Detailed 2D floor plans, elevations, and section drawings ✅3D modeling in SketchUp & AutoCAD ✅Revit MEP electrical layouts and system design ✅Photorealistic rendering for presentations ✅Electrical drafting for residential and commercial projects ✅CAD Conversion ✅Clash Detection and Animation

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collabo... Read more

My name is Christian Ruiz. I am a highly analytical, performance-driven engineer with proven skill sets in 3D modeling, 2D technical drafting, and FEA analysis. For nearly 5 years I have been collaborating, developing and improving mechanical systems. I work in a variety of fields to analyze and evaluate large-scale, highly complex systems. I have repeated success in developing innovative designs with the intent to manufacture, while reducing costs. I will collaborate with you to improve and maintain your current systems, or to create new and innovative projects. I ensure that my designs are not only creative and unique, but also practical, usable and economically viable. In addition, I have a proven ability to manage multiple projects and meet critical deadlines efficiently. Degree: B.S in Mechanical Engineering from Santa Clara University Areas of Expertise: Software • Certified Solidworks Professional (CSWP) • Certified Solidworks Advanced Drawing Tools (CSWPA-DT) • Certified Solidworks Advanced Surfacing (CSWPA-SU) • Certified Solidworks Associate (CSWA) • Solidworks Simulation • Keyshot • Modflow Advisor • Adobe Photoshop and Premier Key Skills • Solid & Parametric Modeling • Geometric Dimensioning & Tolerancing (GD&T) • FEA Simulation • Stress and Strain Analysis • Mechanical Component Design • Design For Manufacturing (DFM) • Machining • Project Management and Quality Control • Test Plan Execution • Troubleshooting and Diagnostics • Superior Mathematics Aptitude • Electro-Mechanical Design

I have a strong technical education foundation and a passion for design. I became certified in Drafting and Engineering Support in Architecture and Civil Engineering and I'm in the process of finishin... Read more

I have a strong technical education foundation and a passion for design. I became certified in Drafting and Engineering Support in Architecture and Civil Engineering and I'm in the process of finishing up a certification in Advanced Manufacturing. I also recently trained with a renowned irrigation professional in irrigation design and am in the process of becoming a Certified Irrigation Technician. Through my education and career, I have become fluent in Adobe Suite, AutoCAD, LandFx, Fusion360, and CorelDraw; and I have specialized in CNC, Laser, Water-jet cutter, 3D printing, and prototyping. I also have 20 years of experience running and managing a successful company in the service industry.

From Napkin Sketches to Production-Ready Files. Do you have a 2D drawing, a conceptual idea, or just a set of technical dimensions? My team and I specialize in bridging the gap between Abstract Conce... Read more

From Napkin Sketches to Production-Ready Files. Do you have a 2D drawing, a conceptual idea, or just a set of technical dimensions? My team and I specialize in bridging the gap between Abstract Concepts and Functional Hardware. What makes us different? Concept Transformation: We convert 2D images or numerical data into precision 3D models in SolidWorks and Blender. Production-First Mindset: We don't just create "pretty pictures." We design for DFM (Design for Manufacturing) to ensure your parts can be CNC machined, injection molded, or 3D printed without errors. Physical Validation: Based in Shanghai, we utilize our in-house fleet of Bambu Lab printers (X1C, P1S, A1) to test every tolerance and fitment before we hand over the final files. Our Expertise Includes: Mechanical Parts: Engineering for plastic and steel consumer goods. Complex Geometry: Voronoi structures, lattice optimization, and generative design. Technical Surfacing: Converting artistic references into production-ready geometry. Let’s turn your data and sketches into tangible, high-quality products.

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throu... Read more

Hello! Thank you for taking a look at my profile. I am currently an engineer with a bachelor's in Material Science and Engineering (Polymers) and a master's in Polymeric Composite Materials. Throughout my career, I've learned to design and model extensively in AutoCAD, Fusion, and other similar software like Blender or Catia. Please let me know if I can help with your design needs! In addition, I am a useful source for rapid prototyping and manufacturing.

With over eight years of experience in the woodworking industry and working with CNC machines, I specialize in the design and production of wooden products, especially in the areas of cutting, assembl... Read more

With over eight years of experience in the woodworking industry and working with CNC machines, I specialize in the design and production of wooden products, especially in the areas of cutting, assembly, and design optimization. In addition to my technical skills in CNC, my ability to create accurate 2D and 3D designs, improve quality and reduce waste in the cutting process, and program CNC machines has allowed me to participate in a variety of industrial and commercial projects. Also, with my skills in editing and producing educational content, especially in the field of language learning and writing effective captions, I have been able to create creative and user-friendly projects. Currently, I own my own CNC workshop, which allows me to implement various projects in a practical and precise manner and respond to the specific needs of my clients. I am always looking to create optimal and precise solutions for different projects and pay close attention to detail at every stage of the design, from needs analysis to final production. Also, in the field of 3D model design, I am able to create accurate and usable prototypes for CNC projects that can help improve the production process and the final quality of the products. The combination of my technical and creative skills makes me an excellent choice for complex and high-precision projects. My goal is to use my expertise to help you implement your projects in the best possible way, whether in the field of CNC and design, or in the field of educational and advertising content production.

I design everything, I use CATIA and Solidworks for CAD projects. I do CAM works using Powermill and finally render by Keyshot If you need. I also can do art works such as logo design using Photoshop

I design everything, I use CATIA and Solidworks for CAD projects. I do CAM works using Powermill and finally render by Keyshot If you need. I also can do art works such as logo design using Photoshop

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can u... Read more

SoCal Outdoor Living is a local 3D landscape design service company. Creating Complete Landscape Designs & Master Plans. With your goals and budget in mind, we deliver a design packet homeowners can understand and contractors can utilize to build your project.

Paul Murphy is a product designer and engineering strategist with 30+ years of experience turning complex concepts into manufacturable products. He has led engineering and design teams for several glo... Read more

Paul Murphy is a product designer and engineering strategist with 30+ years of experience turning complex concepts into manufacturable products. He has led engineering and design teams for several global brands. He founded FILE2FAB, a Los Angeles–based design engineering firm that creates production-ready solutions. The firm delivers practical, end-to-end support from concept and CAD development through prototyping and manufacturing. FILE2FAB serves clients in Aerospace, Medical Devices, Footwear, Apparel, and precision fabrication, providing: • Industrial and mechanical design • CAD modeling, 3D scanning, reverse engineering, and digital fabrication • Design for manufacturing (DFM) and design for assembly (DFA) • Prototyping and material testing Paul combines production expertise and design discipline to create products that are visually refined, technically sound, and commercially viable. His recent work includes fully reverse engineering and redesigning the Golden Globe Award for the Hollywood Foreign Press Association.

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC rob... Read more

I'm a high school student from California with 6 years of design experience looking to help transform your ideas into CAD. I design with Solidworks and am the Director Of Design on my school's FRC robotics team. Each year we design and build a 125lb robot and it is my job to direct this process. I have certified my abilities with the CSWP and CSWA exams which establish my ability as professional grade

Highly creative and experienced 3D modeler and illustrator seeking a challenging role where my skills in 3D modeling, design, and collaboration can contribute to innovative and impactful product devel... Read more

Highly creative and experienced 3D modeler and illustrator seeking a challenging role where my skills in 3D modeling, design, and collaboration can contribute to innovative and impactful product development across various industries.

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference m... Read more

I am a highly experienced Product Designer with over 14 years of expertise, specifically focused on creating USPTO-compliant design patent drawings. I specialize in converting confidential reference materials into official black-and-white line drawings with the high precision required for successful patent applications.   My Core Strengths: Expert Compliance: Extensive experience in meeting strict USPTO standards using Adobe Illustrator.   Precision Engineering: Background in production-ready 3D modeling (Autodesk Alias) ensures every drawing is technically accurate.   Proven Track Record: Successfully developed numerous registered patent drawings (e.g., US D1,087,866 S).   I am committed to providing high-quality technical illustrations that support your intellectual property goals efficiently.

Mechanical Engineering student at SJSU 3 years experience in Solidworks - Mechanical design 2 years experience with 3d printing - Optimizing print settings/ troubleshooting printer problems

Mechanical Engineering student at SJSU 3 years experience in Solidworks - Mechanical design 2 years experience with 3d printing - Optimizing print settings/ troubleshooting printer problems

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resource... Read more

Skilled Autocad Drafter, Solidworks 3D designer, and Project Manager adept at creating technical plans and drawings for architectural and manufacturing purposes. Utilizing the latest computer resources, providing an exemplary level of client service through a streamlined, creative, and efficient approach to every project. Hands-on and detail oriented, comfortable working with surveyors, engineers, scientists and on unique teams finding cost effective methods for getting projects off the ground and through the pipeline. Along with the metal industry i have extensive knowledge with wood working applications, along with pump systems, piping, and ducting for new building constructions.