Hire Local CAD Designers near Lansdale, Pennsylvania

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast... Read more

I am a freelancer who is committed to providing with you the highest quality CAD work possible. I am currently studying Mechanical Engineering at the Schreyer Honors College at Penn State. I have vast experience with SolidWorks as well as Siemens NX through internship and independent project experience. I also have strong experience in design with Adobe Illustrator. All of the graphics on my personal website were designed with Illustrator, and I am confident that I can provide you with a quality design. Feel free to take a look at some of my design work on my personal website. I am committed to providing you with a highly professional experience and look forward to working with you!

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Devel... Read more

I am a recent graduate from the University of Pittsburgh with a bachelors degree in Mechanical Engineering. I am currently working at Aerotech Inc. as a Mechanical Engineer in their Research and Development department. I have over 4 years CAD experience in software including SolidWorks, Autodesk Inventor, AutoCAD, Fusion 360, and ANSYS. I have approximately 9 months of full time engineering design experience, but also did design work through all 4 years of college. I also have a background in matlab and python programming.

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Renderi... Read more

Junior engineering student at Rose-Hulman Intsitute of Technology National Robotics League Combat Robot Designer CSWA & CSWP Certified in Mechanical Design 8 Years of Solidworks Experience Rendering, Strain, and Flow Analysis Trained Hobbies: Music, Art, Optics, Robotics, Soccer, Video Games

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned... Read more

In the course of these few years during graduation/postgraduation, we have been taught a lot of things. But the practical application of my knowledge will help me know how much have I actually learned. Joining your firm will gauge where I stand. No better opportunity than this can come my way. I can showcase my talent and prove my skills here, while in turn, I can learn how this industry functions in and out. That is why you may hire me for this internship.

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester... Read more

With 8+ years of CAD experience in various softwares like Autodesk Fusion and Maya, Solidworks, and Z-Brush, I have utilized my skills in many professional settings. I have motivated the West Chester University of Pennsylvania Biomedical Engineering program to adopt more 3D printers and expand their CAD softwares through my own use of such technology. Through such technological skills, I played a role in 3 additional Senior Design Projects aside from my own as a Junior and Senior with my 3D modeling and printing expertise, and improved the technical outputs of Chester High School to inspire students into STEM field careers by helping a team win 2nd place in their local science fair competition with a modular, 3D printable water filter. My background in designing biomedical devices, engineering hydroponic system attachments, assembling mechanical systems, and fine-tuning 3D printable gadgets will bring a wide perspective and various technical skills to any project.

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background w... Read more

A highly experienced ASE Master Technician who has demonstrated the flexibility to guide various groups to new levels of success within the automotive trade. Sturdy technical and business background with a powerful record of ten years active expertise in diagnostic repair, project and merchandise development, business management, and engineering strategies. Established ability to with success analyze a team’s skills and hone in on those attributes to form a cost effective workplace. Demonstrates the flexibility to quickly learn in new areas furthermore delivering new ideas to the table, has effectively showcased being a convergent thinker and a pacesetter.

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3... Read more

Hello I'm a Mechanical Engineer (Process / CNC Engineer) specializing in CNC machining (2, 2.5 , 3, 4 and 5-axis CNC Mill and Lathes) I'm also very skilled in 3D Modeling (Pro-Engineer / Creo 2.0, 3.0 and (REX- Reverse Engineering Extension , Autodesk Inventor, Geomagic Design / Design X, AutoCAD (Mechanical), and Autodesk Fusion 360. I'm also highly skilled in the following CAD/CAM Software: MasterCam X7 to X9, Esprit, Bob cad /cam

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as... Read more

Well versed in Solidworks 2024, Creo 7.0, Alibre 2024, Inventor 2020 Well versed in Mastercam, BobCadCam, Esprit Cam Knowledge of GD&T Experience in machine design Knowledge of surfacing Experience as a CNC machinist and toolmaker Own small machine shop-specializing in prototype machining and development. i have 3 axis milling capability with a HAAS VF3 CNC machining center, I also have both CNC and manual lathe, 3-D printer, 4 axis router, 4 axis laser Diode and IR) for engraving and cutting of thin metals , TIG and MIG welding, surface grinding, and extensive experience in CNC programming, and fixture design for machining . My primary focus is prototype development, and design for manufacturing. I prefer to deign and build small mechanism and machine components.

Mechanical Engineer with a B.S. in ME from Drexel University. Experience in product design, specifically in the medical device field as well as pumps and water flow devices.

Mechanical Engineer with a B.S. in ME from Drexel University. Experience in product design, specifically in the medical device field as well as pumps and water flow devices.

I have thorough experience in3d printing and modeling. Interested in fluids and automation. Experience with conveyors, welding, production breakdown, lean manufacturing,and process engineering.

I have thorough experience in3d printing and modeling. Interested in fluids and automation. Experience with conveyors, welding, production breakdown, lean manufacturing,and process engineering.

I have over 6 years of experience in the field of architecture, including 3+ years of post graduation work experience. My education and experience have provided me with the sensibility necessary to ef... Read more

I have over 6 years of experience in the field of architecture, including 3+ years of post graduation work experience. My education and experience have provided me with the sensibility necessary to effectively discover quality design solutions to the infinite number of scenarios in the real world. ArchiCAD was my software of choice during my education, and what I used during my position as competition architect for Boltshauser Architekten. During the past 3 years, I used AutoCAD nearly every working day, and for the last month I have used Revit every working day. I have a great deal of experience in producing drawing sets. My most recent projects have involved work space design, as well as the design of custom millwork. I am a effective communicator, and highly responsive to email correspondence. It would be my pleasure to help you with your project.

I am a detailed oriented CAD professional with 15+ years of experience. My background is medical device packaging, mechanical and industrial design concepts, sheet metal, and project management. I a... Read more

I am a detailed oriented CAD professional with 15+ years of experience. My background is medical device packaging, mechanical and industrial design concepts, sheet metal, and project management. I also have some electrical and electronic experience from my tour in the US Marine Corps. I am always working on learning everything I can about the projects I work on. When I start a project, I dedicate myself to bringing the best design possible to my customers. I feel every project is a collaborative effort between myself and my customers.

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Fin... Read more

Currently a 4th year Mechanical Engineering student with SolidWorks experience looking for extra work/income: - Practice using SolidWorks mainly creating parts, assemblies and technical drawings - Finding and incorporating other mechanical components from McMaster-Carr depending on project needs - Using 3D printers and slicer software - Using other illustration software such as Procreate for graphic design and infodiagrams

Being able to exceed what our clients are expecting of us is one of our main goals here at Andrews CADD LLC. We will work on this on every job no matter how big or small. We will work with you and pre... Read more

Being able to exceed what our clients are expecting of us is one of our main goals here at Andrews CADD LLC. We will work on this on every job no matter how big or small. We will work with you and prepare Plans, Floor Plans, Interior Designs, 3D Realistic-Like Renderings, etc. Co-Owner at Andrews CADD LLC, Bob Andrews has an Associates Degree in Architectural Drafting and Design and is currently an Architectural Draftsman with a Custom Casework / Millwork firm. On a daily bases Bob draws Workstations, Greeter Desks, Decorative Walls, Breakrooms, Reception Areas, etc.These drawing will make their way to the shop in preparation of fabrication. Owner Nicole Andrews is in the process of getting an Associates Degree in Interior Decorating. Once she completes her degree we will expand our areas of expertise to assist our Clients in multiple stages of their projects. We look forward to working with you and/or your team to complete your project. Thank you for your time, Nicole Andrews CEO/Chairman Andrews CADD LLC Bob Andrews COO/President Andrews CADD LLC

Proficient in using Revit for comprehensive project development, from concept to completion, including the creation of custom project templates and parametric families. Highly skilled in creating and... Read more

Proficient in using Revit for comprehensive project development, from concept to completion, including the creation of custom project templates and parametric families. Highly skilled in creating and assigning parameters within Revit families to support the development of schedules, quantity takeoffs, tags, and other critical documentation for project coordination. Fully competent in creating and maintaining Revit projects, including working with Central and Local Models to support collaborative workflows across teams

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conver... Read more

Electrical hardware design engineer experienced in all phases of product development with a strong focus in mixed-signal, power conversion, discrete precision & low noise analog circuits, AD/DA conversion, battery power, and audio. I have designed, built, and shipped multiple successful, high and low volume products for retail, industrial, and research markets.

Hello! I'm Rainaire Hansford (Dr. Hansford), a certified Mechanical Engineer with over 9 years of experience in CAD design, 3D modeling, and product development. I specialize in: Parametric 3D CAD mod... Read more

Hello! I'm Rainaire Hansford (Dr. Hansford), a certified Mechanical Engineer with over 9 years of experience in CAD design, 3D modeling, and product development. I specialize in: Parametric 3D CAD modeling 2D manufacturing drawings Product renderings for concept validation CAM toolpaths for CNC & laser cutting Mechanical prototyping & fit analysis I'm certified in SolidWorks, with additional expertise in Fusion 360, AutoCAD, and Inventor. I've worked on projects ranging from custom parts to corporate product design — including working with Coca-Cola to improve their packaging components. Whether you're an entrepreneur with a napkin sketch or an engineer needing a detailed model, I bring ideas to life with precision and speed. Let’s collaborate on your next product!

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, an... Read more

My name is Michael Gray, and I'm currently a mechanical engineering student at Penn State. I'm affiliated with several modeling programs, including SolidWorks, SolidEdge, AutoCAD, Fusion360, Revit, and Blender. I can make both complex parts for assemblies and models for games, and look for any opportunity to learn. Having a passion for design from a young age, I have involved myself with 3D printing and manufacturing processes. Additionally, I have a personal interest in physical assemblies, woodworking, smithing, video game design, finite element analysis, and fluid dynamics. I have taken leadership in design projects requiring model assemblies and parameter-based design, including RC cars, furniture, wind turbines, and personal organizers. All of these outlets have allowed me to explore niches of these programs, and are valuable to my work. If you choose me as a candidate, I will make sure to work with you in every step of the design process. If my services are not to your liking, I will do everything I can to make it right. Thank you for your consideration, and I look forward to the possibility of working together!

I have worked on a variety of projects within the areas of mechanical, civil and electrical disciplines. I have also worked in the facilities engineering department at several companies. I have used A... Read more

I have worked on a variety of projects within the areas of mechanical, civil and electrical disciplines. I have also worked in the facilities engineering department at several companies. I have used AutoCAD and MicroStation for my drafting or design work.

Versatile manager with experience ranging from small residential to multimillion-dollar high profile projects. Architecture and Transportation experience. Ability to oversee and claim ownership of pro... Read more

Versatile manager with experience ranging from small residential to multimillion-dollar high profile projects. Architecture and Transportation experience. Ability to oversee and claim ownership of projects while ensuring timely completion and remaining sensitive to contract budgets.

Over 8 years of experience in CAD/CAM industry with hands-on machining operation for Northwood, Fadal machines.

Over 8 years of experience in CAD/CAM industry with hands-on machining operation for Northwood, Fadal machines.

Hello! I am an independent CAD designer based in Philadelphia. My work consists of creating scaled 3D models for jewelry and wearable objects. My most current work is drafting CAD models and drawings... Read more

Hello! I am an independent CAD designer based in Philadelphia. My work consists of creating scaled 3D models for jewelry and wearable objects. My most current work is drafting CAD models and drawings for film production.

I am a college student looking to gain more experience. I have been able to purchase my own 3D architectural design program while going to school full time to gain a B.S. in Residential Construction T... Read more

I am a college student looking to gain more experience. I have been able to purchase my own 3D architectural design program while going to school full time to gain a B.S. in Residential Construction Technology and Management. My dream is to start my own homebuilding company, but for now, I am wanting to start small with additions and remodelling projects.

I've functioned as an engineer in multiple roles - design, sales, and application, and those roles have given me the tools to provide the best possible service that I can to customers. Such tools incl... Read more

I've functioned as an engineer in multiple roles - design, sales, and application, and those roles have given me the tools to provide the best possible service that I can to customers. Such tools include but are not limited to: Autodesk - Inventor, Vault, and AutoCAD, PTC - Creo, Dassault - Solidworks and ENOVIA, and so on. If you have another tool that you'd want me to use to meet your requirements, I'm willing to learn how to use it to the best of my ability in order to help you. I'm a quick learner and a team player, but I can work independently as well. …

I am a freelance mechanical engineer with a passion for innovation and bringing sketches and ideas to tangible products. I specialize in Solidworks with 6+ years of experience

I am a freelance mechanical engineer with a passion for innovation and bringing sketches and ideas to tangible products. I specialize in Solidworks with 6+ years of experience

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented... Read more

Specializing in Creo Parametric with 5 years experience. Working professional in the connector industry. Holding Associates Degree in Mechanical Engineering Technology. I am extremely detail oriented and strive to take initiative and complete design work above and beyond customer requests.

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you... Read more

Hello! My name is Ashwin Mathews and I'm an undergraduate Mechanical Engineering Major at the University of Houston. I've worked with 3D Modeling Software over 3 years and would love to help you with your latest project! My background includes modeling for my University's Formula SAE Team, and modifying existing free prosthetic arm models for amputees in need through the eNABLE foundation. I also have experience turning 2D drawings to working 3D CAD Models. Feel free to contact me with any questions or concerns!