Hire Local CAD Designers near Hamilton, Montana

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm... Read more

I have been working in this field (design for manufacturability) for over 4 years. I have a technical knowledge in mechanical design gained from higher education as well as experience. Currently I'm using Fusion 360 to create mechanical models, FEA, engineering drawing as well as generating g-code for CNC manufacturing. I also have knowledge in proper material selection for the parts based on the function, environment, cost, adaptability as well as service life of the part. My experience is mostly focused on the design of mechanical parts, mechanical analysis (FEA, material selection) and manufacturing (Machining, additive manufacturing). I have a bachelor's degree in mechanical engineering technology from Montana State University. I have been a member of a design competition offered by TechSoft3D.com. My design was concept electric jet engine for commercial airliner

My Name is Larry I have been in the Construction Business for 35+ years. I started in the manufactured home industry as a Warranty contractor. I designed homes since 2000 from duplexes to custom homes... Read more

My Name is Larry I have been in the Construction Business for 35+ years. I started in the manufactured home industry as a Warranty contractor. I designed homes since 2000 from duplexes to custom homes. I have a business in Montana building homes and designing homes. I use Autodesk Revit 2026 with the latest Bim Technology.

Montana State Grad - Major in Mechanical Engineering Minor in Material Science Open to projects of all sizes!

Montana State Grad - Major in Mechanical Engineering Minor in Material Science Open to projects of all sizes!

Raised on a ranch in MT, I commonly found myself in the position of problem solving through large scale mechanical problems that were common with the machinery we worked with. This experience rooted t... Read more

Raised on a ranch in MT, I commonly found myself in the position of problem solving through large scale mechanical problems that were common with the machinery we worked with. This experience rooted the logical thought process and instilled the mechanical intuition I carry today. I have experience working hand in hand with machinists so my designs are commonly cost effective to manufacture and are within the capabilities of todays modern machines.

We offer cutting edge solutions for scanning, Reverse engineering. Intelligent 3d models, We are "fixers" in a time that "good enough" projects cost more than doing the job right the 1stvtime

We offer cutting edge solutions for scanning, Reverse engineering. Intelligent 3d models, We are "fixers" in a time that "good enough" projects cost more than doing the job right the 1stvtime

I enjoy working with my hands, both in engineering and outdoors. Whether I’m designing systems or out hiking and climbing, I love building and solving problems. My background is in mechanical systems... Read more

I enjoy working with my hands, both in engineering and outdoors. Whether I’m designing systems or out hiking and climbing, I love building and solving problems. My background is in mechanical systems and hydraulics, with a focus on making designs easy to manufacture. When I’m not working, you’ll find me exploring nature or tackling hands-on projects.

I'm a mechanical engineer and industrial designer with 10 years of experience designing complex parts in the sporting goods industry. I've passed both the Solidworks Certified Professional and A... Read more

I'm a mechanical engineer and industrial designer with 10 years of experience designing complex parts in the sporting goods industry. I've passed both the Solidworks Certified Professional and Advanced Surface Modeling exams. I'm confident that I can build just about anything quickly and efficiently.

I’m a Revit / BIM specialist with 15+ years of hands-on construction and design-build experience, focused on producing coordinated, buildable documentation that reflects real-world field conditions.... Read more

I’m a Revit / BIM specialist with 15+ years of hands-on construction and design-build experience, focused on producing coordinated, buildable documentation that reflects real-world field conditions. I work primarily with general contractors, design-build teams, and small AEC firms who need reliable Revit support without adding long-term overhead. My role is pragmatic and situational—cleaning up models, coordinating across disciplines, responding to review comments, and delivering permit-ready drawing sets that help projects move forward. My background includes: • Revit-based architectural and structural documentation • Construction coordination and constructability review • Permit sets and plan-review corrections • As-built documentation aligned with field reality I’m intentionally not prescriptive about BIM processes. In many projects, coordination pressure originates in MEP while structural systems remain largely static. I aim to support teams where BIM genuinely adds value—without disrupting established workflows or PM oversight. I’m also developing lightweight sequencing and 4D examples to support planning and communication where appropriate, but only when it serves the project—not as a forced implementation. I operate as an independent contractor and can engage on a project-by-project basis or as ongoing external BIM capacity. If you’re looking for practical Revit support grounded in real construction experience, I’m happy to connect.

I am a passionate mechanical/manufacturing engineering with a strong focus on machine tool technology and automation design. I have three years of experience working for a company that designs and man... Read more

I am a passionate mechanical/manufacturing engineering with a strong focus on machine tool technology and automation design. I have three years of experience working for a company that designs and manufactures tools for both industrial and retail markets. My academic background includes minors in both Materials and Mechatronics, which I have been able to apply effectively in my professional work. I have designed and built several automated and semi-automated machines and taken them from concept to full-time use on the production floor. These projects involved mechanical design with Solidworks, machining, fabrication and assembly.

I have a Bachelor's Degree in Mechanical Engineering. I have been working as a professional drafter for several years and have skills in design.

I have a Bachelor's Degree in Mechanical Engineering. I have been working as a professional drafter for several years and have skills in design.

I am a mechanical engineer with over 15 years experience in new product design and development. I have worked on everything from high end consumer products and sporting goods to military hardware and... Read more

I am a mechanical engineer with over 15 years experience in new product design and development. I have worked on everything from high end consumer products and sporting goods to military hardware and everything in between. I also work with chemical, electrical and optical engineers for those projects that require them. Feel free to call or email for free advice or to ask general questions. I work from home with zero overhead so my rates are highly competitive and my work is on par with any major design firm, at a fraction of the time and cost. I use various networking programs that give my clients access to my system, so they can view my screen as I work, allowing them to take an active part in the design process. I also provide 3D files at critical intervals which can be viewed on your system without having to purchase design software. I will provide a link to all required programs upon request. I can provide cost effective conceptual designs with 3D prints or complex assemblies ready for manufacture. However big or small your project is, my group of independent contract engineers can get the job done at very affordable rates. My primary goal is to determine what the clients short and long term goals and needs are and help guide them through the process of product development in order to help them avoid pitfalls and money traps. Getting from A to Z with as little cost and time is the key to success, especially for small start up companies. Deliverables always include the following; Native Solidworks files STEP files used in manufacturing / programming CNC STL files used for 3D print EPRT files used to view 3D files on your end using free 3D viewing software available on line 2D drawing used in manufacturing I can also provide provisional patent write ups and assist in licensing or manufacture. NDA, portfolio and professional references are available. For further reference, the following link is an article that was done about me and my work experience; http://www.mechanicaldesignforum.com/content.php?179-Design- for-Defense-Lyman-Bishop-mechanical-engineering-consultant Lyman Bishop ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ www.star-labs.com 406-407-6995 Shown in the links below is the TAC-BALL, designed to serve as an electronic flash bang substitute. See the link below for YouTube videos showing various tests being conducted on the TAC-BALL. https://www.youtube.com/watch?v=FeVfFNUzH2w&list=FLOEnBX wcBeKQvaEn8wU5smA&index=6 https://www.youtube.com/watch?v=p-Hej_Z6iD4&list=FLOEnBX wcBeKQvaEn8wU5smA&index=5

Civil Engineer with deep experience in all CAD programs including training many of the leading companies on their CAD design. Very deep Hydraulic modeling experience also.

Civil Engineer with deep experience in all CAD programs including training many of the leading companies on their CAD design. Very deep Hydraulic modeling experience also.

With an associates degree in Bicycle design and fabrication, I specialize in metal and composit parts with tight tolerances. As a machinist and a welder, I have an understanding not just of the design... Read more

With an associates degree in Bicycle design and fabrication, I specialize in metal and composit parts with tight tolerances. As a machinist and a welder, I have an understanding not just of the design process but of fabrication as a whole.

I'm a mechanical engineer who specializes in injection molded, 3D printed, sheet metal, and machined parts. I provide 2D drawing and 3D model design services, with special attention to Design for Manu... Read more

I'm a mechanical engineer who specializes in injection molded, 3D printed, sheet metal, and machined parts. I provide 2D drawing and 3D model design services, with special attention to Design for Manufacturing and Assembly.

We are a collaboration of engineers dedicated to providing the most efficient resource for your engineering and design needs. Whether you already have an engineering team and need additional capacity... Read more

We are a collaboration of engineers dedicated to providing the most efficient resource for your engineering and design needs. Whether you already have an engineering team and need additional capacity or are an inventor with a new concept you wish to bring to market, Overflow Engineering is a valuable asset to supplement your team!

Hello I'm a mechanical engineer with about 8 years experience working as a design engineer and CAD operator. I have worked for the past 4 years as design consultant and am looking for more clients. I... Read more

Hello I'm a mechanical engineer with about 8 years experience working as a design engineer and CAD operator. I have worked for the past 4 years as design consultant and am looking for more clients. I want to help you materialize your ideas. My services include Product Design Design for Manufacturing Prototyping 3D Modeling Photo-Realistic 3D Product Rendering Product Assembly Guides and Documentation PCB Design

I offer a full prototyping service from design and fabrication to assembly and testing. I have a fully equipped prototype shop stocked with CNC Mill, Lathe, 3D Printer, Welder, ect. My 3D printer is r... Read more

I offer a full prototyping service from design and fabrication to assembly and testing. I have a fully equipped prototype shop stocked with CNC Mill, Lathe, 3D Printer, Welder, ect. My 3D printer is ready to print in PETG, PC Carbon Fiber Filled, ABS, and many other materials. https://cotterc.com/ In my mechanical engineering career, I have brought dozens of products from concept to production. This includes over a decade of experience with sheet metal work, machining, CAM, prototyping, 3D modeling, and engineering. In those many years, I also worked on steel castings, aluminum castings, UHMW castings, and plastic injection molding. I also hold a degree in electrical engineering and have designed several customized circuit boards. Along with experience programming microcontrollers. I can provide circuit layout, board layout, full BOM with supplier, and 3D models if necessary. Below are a few of the products I helped developed: ⚙️ Automated vehicle wash system, americantruckwash.com ⚙️ Line of aluminum bumpers, torklift.com/rv/bumpers-and-more ⚙️ The Glow Guide , torklift.com/rv/glowguide-handrail ⚙️ StableLoad Quick Disconnect, torklift.com/rv/stableload#quick_disconnect ⚙️ Power Armor, torklift.com/rv/powerarmor ⚙️ cotterc.com I look forward to discussing you project in further detail. Casey

Mechanical engineer & software developer skilled in CAD (SOLIDWORKS, AutoCAD), CNC machining, and programming (Python, C++, JavaScript, PHP). Experienced in product design, automation, and IT solution... Read more

Mechanical engineer & software developer skilled in CAD (SOLIDWORKS, AutoCAD), CNC machining, and programming (Python, C++, JavaScript, PHP). Experienced in product design, automation, and IT solutions, with a strong background in engineering and technical consulting

Lifelong electronics nerd, formal education in physics and TV production. Informal education in fine art, photography, music. Career mainly focused on 2D and 3D graphics, image processing, working wit... Read more

Lifelong electronics nerd, formal education in physics and TV production. Informal education in fine art, photography, music. Career mainly focused on 2D and 3D graphics, image processing, working with EEs, MEs, physicists, astronomers, medical doctors on devices, calibration, computer vision, R&D. Picked up Blender way back in BeOS days, got good at it. Now I use it, if not directly for work, for making illustrations or motion graphics for reports, user manuals, or advertising. Background in physics, electronics, expertise in simulations for electronics (ngspice etc) and optics (goptical), or others as needed.

-B.A. in Economics, Oglethorpe University -20+ years drafting and designing on MicroStation platform -Team management exceeding 20 employees -Key clients: Cox Communications, Comcast, Time Warner, Cha... Read more

-B.A. in Economics, Oglethorpe University -20+ years drafting and designing on MicroStation platform -Team management exceeding 20 employees -Key clients: Cox Communications, Comcast, Time Warner, Charter