Hire CAD designers & engineers in Butler, New Jersey

Electrical Design Engineer with 25+ years of experience in the fields of embedded controllers, motion control, electro-optics design, and others. Holder of three US patents. 30+ CPLD and FPGA design... Read more

Electrical Design Engineer with 25+ years of experience in the fields of embedded controllers, motion control, electro-optics design, and others. Holder of three US patents. 30+ CPLD and FPGA designs. Designed dozens of PCBs from concept to production. Designed system architectures for several systems. Wrote software for embedded controllers (ATMEL, PIC, 68000, 8085, 6805, Arduino, Raspberry PI, ESP32) on several IDEs. Supported designs from concept through production and regulatory approvals. Implemented processes to improve PCB manufacturing yields. Supported service engineers on technical issues. Managed projects and supervised technicians and other engineers in their execution. Obtained regulatory compliance (CE, FCC, UL, TUV) for several products.

I am a mechanical engineer with extensive knowledge in electrical controls design. Services I provide... - Mechanical Design and Documentation - Electrical Control Panel Design & Assembly - Robot Pr... Read more

I am a mechanical engineer with extensive knowledge in electrical controls design. Services I provide... - Mechanical Design and Documentation - Electrical Control Panel Design & Assembly - Robot Programming (ABB, RobotStudio) - Robotic workcell design Please feel free to contact me for any assistance on projects.

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plum... Read more

Well-seasoned Mechanical Engineer with more that 30 years of practice, delivering permit-ready, PE-stamped MEP drawings for 45 U.S. states. I specialize in coordinated mechanical, electrical, and plumbing systems that pass plan review the first time. Expertise: Mechanical Engineering Design HVAC load calculations (Elite Software) – Ducted & ductless systems – VRF, split, rooftop, air-source heat pumps Plumbing Design for residential and commercial Buildings Electrical Design for residential and commercial Buildings Energy modeling – Title 24 energy estimation report COMcheck, REScheck, MEP coordination – clash-free Revit models, Fire protection – sprinkler hydraulic calcs, standpipe layouts (NFPA 13/14) Low-voltage – fire alarm, security, AV, nurse-call (NICET-ready) What I Deliver Fully stamped MEP sets (PDF + editable CAD/Revit) Code-compliant designs (IBC, IMC, IPC, NEC, IECC, state amendments) Fast 5–7 day turnarounds on most residential & light-commercial projects Two revision round included; additional at fixed rates Typical Projects Single-family & multi-family residential Retail shells, restaurants, offices < 20,000 sf MEP Tenant improvements & Renovations Data centers, warehouses, medical offices Software & Standards Revit 2025 | SolidWorks 2025 | RHVAC and CHVAC from Elite Software Why Clients Hire Me Since my plans are approved by the city on the first submission, I cover all the city amendments at no additional fee. One-stop stamping – no juggling multiple state PEs Very cost-effective pricing – flat fees or Hourly Zero surprises – I flag code conflicts before submittal Let’s get your plans approved. Upload your architectural set or sketch; I’ll return a firm quote within 24 hours.

I am currently an Engineering Student seeking to expand my CAD experience! I've had around 3-4 years of experience with OnShape which is what I primarily use for modeling. I also have 2 years of exper... Read more

I am currently an Engineering Student seeking to expand my CAD experience! I've had around 3-4 years of experience with OnShape which is what I primarily use for modeling. I also have 2 years of experience with Blender which I mainly use for rendering. I offer highly flexible CAD modeling services, creating precise 3D models based on any pre-existing blueprints and dimensions. If you do require renderings, please contact me beforehand to discuss your preferred angles, detail, etc. Open for negotiating and am very hard-working/dedicated. I'd focus on getting your project back to you within a few business days! I work fairly quick on projects, especially when blueprints and dimensions and accurate and organized. I can also provide .stl (and other) files for 3D-Printing! In summary my characteristics: -Hardworking -Determined -Organized -Efficient My strengths: -CAD -3D Modeling -Rendering Other important details: -I work quick! -Primarily looking to expand experience -I appreciate detail and communication -I promise to provide with my greatest intentions, effort, and respect

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves,... Read more

I am a highly motivated Mechanical Design Engineer with 6 years of experience and a Bachelor in Mechanical and Manufacturing Engineering. I have a vast experience in complex design such as Valves, Pneumatic/Hydraulic Cylinder and Linear Sensors using CAD, FEA and Engineering analytical tools. My work include 3D Design / Modeling of parts and assemblies, 2D Manufacturing Drawings (close fit tolerances, geometric tolerances, stack up analysis), Developing / Evaluating / Optimizing Prototypes, Selecting suppliers. My project management, communications and engineering skills will be a great asset to complete your projects with high quality service in a timely manner.

Hello, I'm a 3D modeler who loves to model characters and build environment settings from 2D concepts. Additional strengths I possess are UV Mapping and IK/FK Biped Rigging. Known to be a hard-workin... Read more

Hello, I'm a 3D modeler who loves to model characters and build environment settings from 2D concepts. Additional strengths I possess are UV Mapping and IK/FK Biped Rigging. Known to be a hard-working team player with a passion to meet the client's/team's expectations. With experience working in professional pipelines, with good knowledge of topology, and character anatomy. Technically skilled in Autodesk Maya. Has created three mini computer-animated shorts, each with unique premises. Loves to work in 3D and never wants to stop improving.

Tesla Mechanical Designs specialises in delivering advanced mechanical design and engineering solutions tailored for the Engineering and Construction (AEC) industry. Leveraging extensive expertise in... Read more

Tesla Mechanical Designs specialises in delivering advanced mechanical design and engineering solutions tailored for the Engineering and Construction (AEC) industry. Leveraging extensive expertise in mechanical drafting, 3D modelling, product design, and engineering analysis, the company empowers clients to optimise project efficiency, accuracy, and innovation. Core Service Offerings: • Mechanical Drafting & Product Design: Precision-driven drafting and detailed product design for a wide range of mechanical systems, ensuring manufacturability and compliance with industry standards. • 3D Modelling & Technical Documentation: Creation of highly accurate 3D models and comprehensive technical documentation to support effective design communication and seamless project execution. • Sheet Metal Design & Engineering Analysis: Specialised services in sheet metal component design and advanced engineering analysis to enhance structural integrity and performance. • BIM & CAD Integration: Integration of Building Information Modelling (BIM) and Computer-Aided Design (CAD) solutions, enabling coordinated workflows and reducing project risks through intelligent digital models. Why Choose Tesla Mechanical Designs: • Industry Experience: Backed by years of experience and a proven track record in the global AEC sector, the team delivers solutions that exceed industry benchmarks for quality and reliability. • Cutting-Edge Technology: Utilisation of the latest design tools and software ensures innovative, efficient, and future-ready project outcomes. • Client-Centric Approach: Customised solutions are developed to address each client’s unique requirements, with a focus on transparent communication and long-term partnership. • Quality Assurance: Rigorous quality control processes and adherence to international standards guarantee precision and consistency in every deliverable. Tesla Mechanical Designs stands as a trusted partner for AEC firms seeking comprehensive mechanical design, drafting, and BIM solutions that drive project success from concept through construction.

My YouTube Channel about CFD simulations: @CFD-Learning My ▒▒▒▒▒▒▒▒ Channel about CFD simulations: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ My Grabcad Account: https://grabcad.com/mohsen.jahanbakhsh-1

My YouTube Channel about CFD simulations: @CFD-Learning My ▒▒▒▒▒▒▒▒ Channel about CFD simulations: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ My Grabcad Account: https://grabcad.com/mohsen.jahanbakhsh-1

Degreed mechanical engineer and certified Solidworks professional. Passion for creating new things and turning ideas into reality. I specialize in 3D modeling, simulation, rendering, technical drawin... Read more

Degreed mechanical engineer and certified Solidworks professional. Passion for creating new things and turning ideas into reality. I specialize in 3D modeling, simulation, rendering, technical drawings, mechanical design, and FDM prototyping solutions.

Vizual Works is an established company that provides an outlet for the distribution of stock media products. 3D Art, android Applications, IOS Applications, 3D Applications, Web Design, Web Developmen... Read more

Vizual Works is an established company that provides an outlet for the distribution of stock media products. 3D Art, android Applications, IOS Applications, 3D Applications, Web Design, Web Development, photography, 3D Commercials are a sample size of the stock media contents provided by Vizual Works. Although Vizual Works is a new company, we have a wide range of artists and freelancers whom are extremely experienced in the world of stock media production. We believe that art, technology and engineering are intertwined in many different complexities. Therefore, we work with clients to bring forth the best art concepts and engineer them into awesome technologies. Our objective is to provide our clients excellent service while we render their “viZions” to a reality.

Jewelry Model Maker and 3D Artist, I have a significative experience with One of a Kind and High Jewelry projects.

Jewelry Model Maker and 3D Artist, I have a significative experience with One of a Kind and High Jewelry projects.

PROFESIONAL SUMMARY: Italian Architect with experience in residential and commercial buildings, Senior Design in New York, with over 16 years of experience Building envelope systems, and Façade resto... Read more

PROFESIONAL SUMMARY: Italian Architect with experience in residential and commercial buildings, Senior Design in New York, with over 16 years of experience Building envelope systems, and Façade restoration of commercial and residential buildings in a variety of sizes. • Completed more than 5,000 projects in New York City area including, FISP Projects, Façade Repairs, Roofing Replacement, Sidewalk and Vault reconstruction, Curtain Walls Repairs, Curtain Wall Installation, Window Replacement, EIFS system. • Developed and implemented a comprehensive standards program, creating consistency in drawings production, enabling efficient workflow, and saving the company 30% manpower and budget cost, 50%-time drawings preparation and 75% better design. • Extensive and proven experience filing projects with DOB, LPC, DOT, MTA in NYC. EXPERIENCE JANUARY 2007 TO PRESENT. SENIOR DRAWINGS SPECIALIST/DRAFTING QUALYTY MANAGER CANY ARCHITECTRE & ENGINEERING DPC Main projects: • Empire State Building-Mooring mast. • The Trinity Centre-LPC Façade Restoration. • Randolph Houses-Residential Development. • Montefiore Medical Center-Façade Restoration. • 893 Broadway-Façade-Window-Roofing projects. • O’Toole Building-Facade-Roofing project, • Flat Iron Building-Façade project. • Neue Galerie-Façade and Roofing Projects • 2 Rector Street-LPC Façade Restoration program. • Stuyvesant Town-Peter Coper Village-Façade Restoration projects. • 670 Broadway-Facade Restoration. • The Candler Building-Facade Repairs. • One Grand Central Place-Façade and Roofing project. • Austrian Cultural Forum-Façade and Roofing Projects. • 110 E 42nd Street-Cipriani-Interior LPC project. • 1260 Broadway-LPC façade Restoration project. • 1515 Broadway-Sidewalk, Façade, and Roofing projects. • AC, Architectural CAD library, with about 7,000 details. • SC, Structural CAD Library, with about 2,000 details. Managed the design and development and implemented the Company Drawings Standards: • Dynamic-Blocks. • Symbols. • Construction drawings pages templates. • General notes templates. • Projects templates. • DOT, Construction details templates. • DOB, LPC, DOT, MTA project’s pages templates. Developed Drafters and Assistant Project Manager Standard’s Training Program, enforcing AutoCAD best practices and Construction Documents standards. • Annotative text management. • Detail management. • Dynamic blocks management. • Layering management. • National CAD standards • Plot Style management. • Sheet set management. • Text Style management. • X-ref management.

I use a variety of software, including Autodesk 3D Studio MAX, Autodesk AutoCAD, Rhinoceros 3D, SketchUp, Adobe Photoshop, and Adobe Illustrator. Etc. I have a background in industrial design and have... Read more

I use a variety of software, including Autodesk 3D Studio MAX, Autodesk AutoCAD, Rhinoceros 3D, SketchUp, Adobe Photoshop, and Adobe Illustrator. Etc. I have a background in industrial design and have 20 years of experience.

Hi there! I’m an enthusiastic CAD designer with a growing passion for turning creative ideas into precise, functional 3D models and technical drawings. I specialize in AutoCAD & Revit and love tac... Read more

Hi there! I’m an enthusiastic CAD designer with a growing passion for turning creative ideas into precise, functional 3D models and technical drawings. I specialize in AutoCAD & Revit and love tackling design challenges that bring concepts to life. While I’m new to Cad Crowd, I’m dedicated to delivering high-quality, accurate work—on time and to spec. I value clear communication, attention to detail, and continuous learning. Whether it’s a simple model or a complex assembly, I aim to provide designs that not only look great but work flawlessly. Let’s collaborate to bring your project to life!

Professional Mechanical Engineer and CAD Expert - experience in Medical Device and Automotive Engineering.

Professional Mechanical Engineer and CAD Expert - experience in Medical Device and Automotive Engineering.

Eugene is a multi-disciplinary creative with an industrial, package, and brand design know-how. He has over ten years of experience working at product design and design strategy consultancy to global... Read more

Eugene is a multi-disciplinary creative with an industrial, package, and brand design know-how. He has over ten years of experience working at product design and design strategy consultancy to global beauty brand's in-house creative team.

I am a Purdue engineer with experience in AutoCAD design and modeling. I'm known for delivering innovative solutions and strong results even within tight deadlines, I combine technical expertise with... Read more

I am a Purdue engineer with experience in AutoCAD design and modeling. I'm known for delivering innovative solutions and strong results even within tight deadlines, I combine technical expertise with strong communication skills to drive successful outcomes for my clients

Extremely ambitious, self-motivated, and a go-getter are the ways I like to describe myself. I am a recent grad of Rutgers University, with a bachelors in Electrical Engineering. Currently a Project E... Read more

Extremely ambitious, self-motivated, and a go-getter are the ways I like to describe myself. I am a recent grad of Rutgers University, with a bachelors in Electrical Engineering. Currently a Project Engineer at Philadelphia Sign Company.

I'm a senior architectural professional with 20 years of hands-on Revit experience, available to US and international firms as a remote Design Development and BIM specialist. My work lives in the ga... Read more

I'm a senior architectural professional with 20 years of hands-on Revit experience, available to US and international firms as a remote Design Development and BIM specialist. My work lives in the gap between design intent and construction reality. I produce DD packages that are technically coordinated, code-aware, and consultant-ready — not just presentation-ready. I've spent two decades managing full project documentation and coordinating structural, MEP, and civil consultants, so I understand exactly how DD decisions create downstream consequences in construction documents. What I offer remotely: • Design Development in Revit — complete plan, elevation, section, detail, and schedule packages • Client presentation renderings — Enscape for fast, compelling walkthroughs; V-Ray for photorealistic marketing images • BIM management — model setup, workset structure, Revit standards, template creation, model auditing • Consultant coordination — integrating structural and MEP drawings during DD phase I work with residential custom, multifamily, mixed-use, hospitality, and commercial firms. I'm a dual US/Turkish national currently based on Turkey's Mediterranean coast, with full availability during US Eastern business hours. If your firm is carrying DD workload that needs a senior Revit resource — without the overhead of a full-time hire — let's connect. 📩 Open to: freelance project work, long-term firm partnerships, monthly retainers 🛠 Software: Revit (advanced, 20 yrs), Enscape, V-Ray, AutoCAD 🌍 Location: Remote / Mediterranean Turkey — available US Eastern hours

• Mechanical Engineer with 3+ years experience in Fortune 500 company settings working as a CAD designer, drafter, and 3D Printing expert • Capable of designing and developing custom products and con... Read more

• Mechanical Engineer with 3+ years experience in Fortune 500 company settings working as a CAD designer, drafter, and 3D Printing expert • Capable of designing and developing custom products and concepts for companies, startups, and entrepreneurs • Pharmaceutical device design experience (4+ years) • Manufacturing and custom bottling services experience (2+ years) • AutoCAD 2D experience with floorplans and layouts

I’m Randy Davis, founder of Episode 11 Productions and a seasoned media professional with nearly 20 years of experience in video production and 3D animation. My journey in 3D animation has been driven... Read more

I’m Randy Davis, founder of Episode 11 Productions and a seasoned media professional with nearly 20 years of experience in video production and 3D animation. My journey in 3D animation has been driven by a passion for transforming ideas into visually engaging stories, and Autodesk Maya has been a key tool in bringing these creations to life. Through Maya, I’ve developed a strong skill set in modeling, texturing, rigging, and animating, allowing me to create dynamic, lifelike animations that captivate and communicate effectively. Over the years, I’ve had the opportunity to work with clients across various industries, using 3D animation to visualize complex concepts, demonstrate product functions, and build immersive experiences that elevate brand storytelling. I enjoy exploring Maya’s vast capabilities to craft detailed, high-quality animations that bring my clients’ visions into focus. Whether it’s creating intricate product animations or engaging visual effects, I bring technical expertise and creativity to each project, aiming to deliver animations that resonate with audiences and make a lasting impact.

I am Benjamín Martes and I offer my expertise as an experienced AutoCAD Architect. I specialize in creating both 3D models and flat models, and I am available for hire to meet your architectural needs... Read more

I am Benjamín Martes and I offer my expertise as an experienced AutoCAD Architect. I specialize in creating both 3D models and flat models, and I am available for hire to meet your architectural needs. I am confident in my ability to provide high-quality and efficient services, and I look forward to the opportunity to demonstrate my skills for you.

Currently active Curtain Wall details and production drawings, experienced in ADA ramp designs in PA & NJ, entered into the engineering world with P&ID piping instrumentation drawings. Return time for... Read more

Currently active Curtain Wall details and production drawings, experienced in ADA ramp designs in PA & NJ, entered into the engineering world with P&ID piping instrumentation drawings. Return time for drawings depends on the level of detail you may require. Very efficient and precise with every drawing. Feel free to send anything my direction. :)

Industrial / Mech Designer / Artist with 18 years experience I specialize in design fabrication and product development for innovation research. I am also 3D modeling instructor for Fusion360. I h... Read more

Industrial / Mech Designer / Artist with 18 years experience I specialize in design fabrication and product development for innovation research. I am also 3D modeling instructor for Fusion360. I have experience w the following CAD programs - Solidworks - Inventor - Rhino - Fusion360 - Autocad - 3DS MAX - Mudbox For more information, please see personal website for LinkedIn resume and to request portfolio.

Biomedical engineering graduate with proficiency in SolidWorks, Creo/ProEngineering, and Autodesk Inventor. I am currently in the process of gaining my SolidWorks certification.

Biomedical engineering graduate with proficiency in SolidWorks, Creo/ProEngineering, and Autodesk Inventor. I am currently in the process of gaining my SolidWorks certification.

I am a 3D Artist from the New York City Metropolitan Area specializing in 3D Modeling and Texturing. I have experience using 2D and photo reference to create both photorealistic and stylized models an... Read more

I am a 3D Artist from the New York City Metropolitan Area specializing in 3D Modeling and Texturing. I have experience using 2D and photo reference to create both photorealistic and stylized models and textures, as well as using feedback to help bring the clients vision to life.

Majored in Communication Arts, also a self-taught 3D product modeler with high passion for filming, photography and 3D modeling. Specialized in turning 2D product designs into 3D models with high qual... Read more

Majored in Communication Arts, also a self-taught 3D product modeler with high passion for filming, photography and 3D modeling. Specialized in turning 2D product designs into 3D models with high quality renderings.