Hire CAD Drafting Designers near New York, United States

Mechanical Engineer (EIT) with 7+ years of R&D and product development experience, specializing in Solidworks design, rapid prototyping, and production documentation. Proven track record in launching... Read more

Mechanical Engineer (EIT) with 7+ years of R&D and product development experience, specializing in Solidworks design, rapid prototyping, and production documentation. Proven track record in launching ready-to-sell aerospace and robotics products. Cross-functional in mechanical and electrical systems, with experience leading CM collaboration and PDM systems.

I have an A.A.S. in Computer-Aided Drafting & Design with over a decade of CAD experience. I'm proficient in creating many different types of CAD drawings and 3D models for various industries such as:... Read more

I have an A.A.S. in Computer-Aided Drafting & Design with over a decade of CAD experience. I'm proficient in creating many different types of CAD drawings and 3D models for various industries such as: fabrication drawings, detail drawings, mechanical and architectural drawings, presentation models, renderings, prototype models and more. I understand that strong communication is a key factor in getting a job completed correctly and on time. Let's talk about it and then get it done!

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site... Read more

Experience providing civil engineering design and consulting services for commercial, retail, industrial, residential, mixed-use land development projects. Specific skills include site selection, site planning, site design, roadway design, stormwater management planning and design (gray infrastructure and LID/Green infrastructure), hydrology/hydraulics, entitlements and permitting, project scheduling, cost estimating, franchise utility coordination, and construction phase services. B.S. in Civil Engineering from California Polytechnic State University, San Luis Obispo, CA Project experience in the CA, NJ, and NY markets. Proficient in the following design software programs: AutoCAD Civil 3D as well as HydraFlow Hydrographs and Vehicle Tracking extension to the program, Flowmaster, StormCAD, and ArcGIS.

I am an AutoCAD drafter and Civil Engineering student with experience producing fabrication-ready shop drawings, structural steel details, stair systems, handrails, and construction documentation. My... Read more

I am an AutoCAD drafter and Civil Engineering student with experience producing fabrication-ready shop drawings, structural steel details, stair systems, handrails, and construction documentation. My drafting experience includes creating detailed plans, sections, elevations, and fabrication drawings for real-world projects. I have performed field measurements and translated site conditions into accurate AutoCAD drawings used for fabrication and construction. In addition, I hold a Computer-Aided Drafting Certificate and have experience with AutoCAD, Revit, Civil 3D, and SolidWorks. Services I provide include: • AutoCAD drafting and drawing revisions • Shop drawings and fabrication drawings • Structural steel and stair detailing • Plan, section, and elevation drawings • PDF-to-CAD conversions • Construction document preparation • Dimensioning and drafting support I pride myself on producing organized, accurate drawings with strong attention to detail and clear communication throughout every project. Whether you need existing drawings revised or new drawings created from sketches, PDFs, or field measurements, I am committed to delivering quality work on schedule.

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thou... Read more

Hello! My name is Rius and I am entering my senior year studying Mechanical Engineering. I have been experienced with 2D and 3D modelling since I was in high school. I came across this site and thought it would be great to share my knowledge. As the saying goes, "If you're great at something, don't do it for free." Look forward to working with you!

Since 2007, Tesla Outsourcing Services LLC has been a trusted global partner for the Architecture, Engineering, and Construction (AEC) industry, providing reliable Building Information Modeling and CA... Read more

Since 2007, Tesla Outsourcing Services LLC has been a trusted global partner for the Architecture, Engineering, and Construction (AEC) industry, providing reliable Building Information Modeling and CAD Services to clients worldwide. Recognized as a leading partner for AEC firms, our engineering consultants empower global pre-construction companies to reduce costs, scale operations, and improve project efficiency. Our goal is to be the preferred global provider of BIM, CAD, and VDC solutions, offering flexible pricing and industry-best quality. With a team of experienced, 100% English-speaking architects and engineers, we ensure smooth communication, faster project delivery, lower risks, and better outcomes through advanced Virtual Construction workflows.

Education: CAD Drafting Diploma North American School of Drafting - Scranton, PA Bachelors of Science State University of New York - Brockport, NY Experience: 25 years of AutoCAD in various disc... Read more

Education: CAD Drafting Diploma North American School of Drafting - Scranton, PA Bachelors of Science State University of New York - Brockport, NY Experience: 25 years of AutoCAD in various disciplines including architectural casework, store fixtures, retail/office and industrial space planning. 7 years of 3D modeling/design in SolidWorks, Inventor, and Pro E.

I am a Mechanical Designer with over 4 years of experience creating production-ready CAD models, fabrication drawings, BOMs, and manufacturing documentation for industrial equipment. My background in... Read more

I am a Mechanical Designer with over 4 years of experience creating production-ready CAD models, fabrication drawings, BOMs, and manufacturing documentation for industrial equipment. My background includes designing custom industrial machinery, process equipment, structural fabrications, sheet metal components, and manufacturing assemblies using Autodesk Inventor and AutoCAD. I have experience supporting projects from concept development through fabrication by producing detailed drawing packages, DXF files, bills of materials, and shop documentation. In addition to CAD design, I have hands-on manufacturing experience working with fabrication, CNC plasma cutting, waterjet cutting, welding, and production processes. This allows me to create designs that are practical, manufacturable, and cost-effective. Services I provide include: • 3D CAD Modeling • 2D Manufacturing Drawings • Autodesk Inventor Design • AutoCAD Drafting • DXF Creation for Laser, Plasma, and Waterjet Cutting • Bill of Materials (BOM) Development • Assembly and Fabrication Drawings • Reverse Engineering from Existing Parts or Drawings • Legacy Drawing Updates and Revisions • Design for Manufacturing (DFM)

Drafting student with experience in AutoCAD, SolidWorks, mechanical drafting, process piping, and technical documentation. Comfortable creating and revising 2D drawings, converting PDFs and sketches i... Read more

Drafting student with experience in AutoCAD, SolidWorks, mechanical drafting, process piping, and technical documentation. Comfortable creating and revising 2D drawings, converting PDFs and sketches into CAD files, preparing technical documentation, and supporting drawing revision projects. Currently expanding my experience through engineering and drafting coursework and upcoming utility industry documentation work. Detail-oriented, responsive, and committed to delivering clean, organized CAD files that meet project requirements. Software experience includes AutoCAD, SolidWorks, Photoshop, Lightroom, and technical drawing standards including ANSI and ASME fundamentals.

Freelance CAD designer delivering professional AutoCAD drafting for architects, engineers, and contractors nationwide. Whether you need a quick redline update or a full set of construction drawings, I... Read more

Freelance CAD designer delivering professional AutoCAD drafting for architects, engineers, and contractors nationwide. Whether you need a quick redline update or a full set of construction drawings, I combine technical accuracy with efficient turnaround to help you meet deadlines and budget.

I’m an architectural designer and founder of Studio Mivneh, specializing in residential interiors, spatial planning, CAD drafting, and photorealistic 3D visualization. I hold a Master of Architecture... Read more

I’m an architectural designer and founder of Studio Mivneh, specializing in residential interiors, spatial planning, CAD drafting, and photorealistic 3D visualization. I hold a Master of Architecture degree from the University of Miami School of Architecture and have experience working on high-end residential projects ranging from gut renovations to custom homes. My services include: • AutoCAD floor plans, elevations, and drawing sets • Space planning and interior layouts • 3D modeling in Rhino • Photorealistic renderings in Lumion • FF&E selections and material palettes • Lighting and millwork design I’m passionate about creating thoughtful, functional, and visually compelling spaces while delivering clear communication, attention to detail, and high-quality work.

I’m an Architectural Drafter and Revit Modeler with a Bachelor of Architecture and hands-on residential construction experience. I help clients turn field measurements, sketches, PDFs, and existing c... Read more

I’m an Architectural Drafter and Revit Modeler with a Bachelor of Architecture and hands-on residential construction experience. I help clients turn field measurements, sketches, PDFs, and existing conditions into clear architectural drawings, coordinated Revit models, and 3D visualizations. My experience includes residential remodels, decks, porches, kitchens, exterior improvements, existing-condition surveys, commercial documentation, and custom residential projects. Services I can provide include: • Revit modeling and architectural drafting • Existing-condition and as-built drawings • Floor plans, elevations, sections, and construction details • Residential remodel, addition, deck, and porch drawings • Kitchen and millwork documentation • Permit and construction drawing support • AutoCAD drafting • 3D modeling and architectural visualization My construction background helps me develop practical drawings with attention to dimensions, materials, field conditions, and constructability. Software: Autodesk Revit, AutoCAD, SketchUp, Twinmotion, D5 Render, Unreal Engine, Photoshop, and InDesign. I value clear communication, organized files, and practical architectural documentation.

Have +10 years experience in Cad drafting and architecture planning . I draw plans fast , accurate and detailed

Have +10 years experience in Cad drafting and architecture planning . I draw plans fast , accurate and detailed

Longitude Engineering Pte LtdMay2008– Aug 2012   Employ as a structure engineer, specializing in offshore structure design. Use Autocad and FE software doing analysis, and familiar with m... Read more

Longitude Engineering Pte LtdMay2008– Aug 2012   Employ as a structure engineer, specializing in offshore structure design. Use Autocad and FE software doing analysis, and familiar with mechanical equipments.   Offshore Installation Lifting Analysis & Design(4 point lifting)   Marine Transportation Barge Motion Analysis Barge Longitudinal and Local Strength Check Seafastening Analysis & Design Structural Integrity Check during Marine Transportation   Loadout Lifting & Rigging Analysis & Design Design of Load out Temporary Supports, Lift Points Structural Integrity Check during Loadout Barge Strength Assessment   Construction Design of temporary supports, skid beams etc  Equipment Installation Study & Procedure Lifting & Rigging Analysis & Design General Steel Design Foundation design and reinforcement for local structure using 3D software. Auto Cad Drafting : 2D and 3D Design Drawings Material Take Off   Other Engineering Review (Checker / Verification) Equipment Skid Design (Structural / Drafting) Module/Topside Structural Inplace Analysis & Design  (Structural) General Steel Structures Design FEM Analysis   Software have been used for all structural designs: AutoCad, STAAD Pro, Neifusion, FEMAP.   Keppel Fels Shipyard May 2007 –May 2008   as a lead engineer in offshore structure design for SIM-submersible B307.   Main work focus including scantling, machine foundation and Super structure foundation design check like platform, vertical ladder, girder, trip bracket and etc. Crane pedestal and boom rest design Familiar with site inspection and solve site problems in shipyard. Familiar with cutting plan and construction procedures.   Falconer BryanConsultant Pte Ltd May 2006 – Apr 2007   Employed as a offshore seafastening design engineer   Taking part in super-structure of residential building design with Continuous Beams and foundation design of super-structure. Seafastening design for jacket and major equipments. Steel design with STAAD Pro, Auto Cad.  

I provide detail-oriented CAD, BIM, GIS, and document-production support for architecture, engineering, planning, environmental, nonprofit, and small-business teams. I help clients turn marked-up PDF... Read more

I provide detail-oriented CAD, BIM, GIS, and document-production support for architecture, engineering, planning, environmental, nonprofit, and small-business teams. I help clients turn marked-up PDFs, scans, legacy files, field notes, and spatial data into clear, organized deliverables: clean AutoCAD drawings, Revit sheets and model updates, map exhibits, plan diagrams, and practical document-tracking systems. My background combines architecture and computer-aided drafting with spatial analysis and a growing focus on GIS, urban systems, and environmental work. I work carefully with file organization, layer standards, drawing clarity, revision tracking, and agreed deliverable requirements. Services: • PDF, scan, and legacy drawing conversion to organized AutoCAD files • AutoCAD cleanup, layers, blocks, dimensions, title blocks, and redline revisions • Revit model cleanup, sheet setup, annotations, schedules, and drawing-package support • Site-context, parcel, transit, flood-zone, and environmental-constraint maps • Presentation-ready plan diagrams, map exhibits, and community-planning graphics • Drawing-library organization, file naming, revision logs, and document trackers Software: AutoCAD, Revit, Rhino, ArcGIS Pro/QGIS, Adobe Acrobat/Bluebeam-style markup workflows, Microsoft Excel/Google Sheets Summary: I provide drafting, documentation, mapping, and visualization support. I do not provide stamped architectural, engineering, surveying, legal, or code-compliance services. Send the source files, desired output format, approximate sheet/file count, deadline, and any standards or reference examples. I will confirm scope, assumptions, deliverables, and revision limits before starting.

I am a dedicated Civil Engineer with a Bachelor of Science in Civil Engineering from the University of Massachusetts Lowell. I have extensive experience in structural design and analysis, project coor... Read more

I am a dedicated Civil Engineer with a Bachelor of Science in Civil Engineering from the University of Massachusetts Lowell. I have extensive experience in structural design and analysis, project coordination, and site inspections. Skills: Proficient in Revit, AutoCAD, RISA3D, RAM Elements, and other engineering software. Strong Revit modeling and CAD drafting skills. Fluent in English and Portuguese, proficient in Spanish.

professional mechanical design and simulation engineer with +15 years of experience in SolidWorks and Ansys, specializing in 2D/3D modeling, prototyping, CFD and FEA and fluid flow analysis.

professional mechanical design and simulation engineer with +15 years of experience in SolidWorks and Ansys, specializing in 2D/3D modeling, prototyping, CFD and FEA and fluid flow analysis.

Professional CAD Technician and GIS Analyst with a background in Surveying and Geoinformatics from Nnamdi Azikiwe University. Experienced in CAD drafting, land surveying, topographic mapping, GIS data... Read more

Professional CAD Technician and GIS Analyst with a background in Surveying and Geoinformatics from Nnamdi Azikiwe University. Experienced in CAD drafting, land surveying, topographic mapping, GIS data processing, and technical drawing preparation. Skilled in AutoCAD, QGIS, Civil 3D, and parametric 3D modeling workflows for engineering and mapping projects. Worked as a Surveyor II and GIS Analyst at Apex Survey Services, contributing to land administration and geospatial projects. Capable of producing accurate 2D drawings, site plans, coordinate plotting, contour maps, and professional CAD documentation. Focused on detail, accuracy, and delivering clean, high-quality work on time.

Mechanical Design Engineer with 12+ years of experience in CAD/CAE-based product development, manufacturing optimization, and tooling design. Specialized in Siemens NX and CATIA for mechanical design... Read more

Mechanical Design Engineer with 12+ years of experience in CAD/CAE-based product development, manufacturing optimization, and tooling design. Specialized in Siemens NX and CATIA for mechanical design, engineering drawings, and reverse engineering, with hands-on experience in manufacturing-oriented design and dimensional inspection (CMM / 3D scanning). I apply a data-driven engineering mindset to improve design efficiency and product quality, while exploring the integration of machine learning and AI into intelligent manufacturing workflows.

I am a 3rd-year architecture student with hands-on experience in AutoCAD drafting and Revit architectural modeling. I support architects, interior designers, and small studios by delivering clean, acc... Read more

I am a 3rd-year architecture student with hands-on experience in AutoCAD drafting and Revit architectural modeling. I support architects, interior designers, and small studios by delivering clean, accurate drawings and well-organized Revit models. My strengths include preparing floor plans, sections, and elevations, converting sketches or PDFs into AutoCAD.