Hire MEP Designers near New York, United States

Chukwuma Menakaya, has been providing consulting services to various clients for the last four years in New York City.  Menakaya has a wealth of expertise in numerous areas such as Project Management,... Read more

Chukwuma Menakaya, has been providing consulting services to various clients for the last four years in New York City.  Menakaya has a wealth of expertise in numerous areas such as Project Management, Electrical Estimations and Engineering Design, Revit MEP, and Load Concentration Factor with Finite Element Analysis application. Capitalizing on his experience, he developed Majesty Consultancy to use his engineering knowledge, founded upon the core values of realistic, efficient, and sustainable solutions, to support organizations in successfully completing projects. In addition, Majesty Consultancy applies engineering models through in-depth research to develop practical sustainable solutions using renewable energy technology, as well, as developing community-based wireless security surveillance systems linked with telecommunication technology.  

I am a highly skilled Civil Engineer with specialized expertise in MEP (Mechanical, Electrical & Plumbing) systems and HVAC design, analysis, and implementation. With 15+ years of professional experie... Read more

I am a highly skilled Civil Engineer with specialized expertise in MEP (Mechanical, Electrical & Plumbing) systems and HVAC design, analysis, and implementation. With 15+ years of professional experience, I have successfully delivered residential, commercial, and industrial projects that required seamless coordination between structural, architectural, and MEP disciplines. What I Offer: - Civil Engineering Services: Structural design, site development, grading plans, concrete/steel design, code compliance, and cost estimation. - MEP Engineering: Full design and coordination of mechanical, electrical, and plumbing systems with CAD/Revit-based modeling. - HVAC Expertise: Load calculations, duct design, equipment selection, energy-efficient solutions, and system troubleshooting. - Software Proficiency: AutoCAD, Revit, HAP, Carrier E20, STAAD Pro, ETABS, and Navisworks. - Deliverables: Complete construction drawings, detailed BOQs, shop drawings, 3D coordination models, and compliance reports. Why Work With Me? ✔ Multi-disciplinary expertise: Civil + MEP + HVAC integration. ✔ Proven track record in delivering on time and within budget. ✔ Strong attention to detail, ensuring compliance with international codes and standards (ASHRAE, NFPA, NEC, IPC, etc.). ✔ Collaborative and client-focused approach to problem-solving. Whether you need structural design, MEP coordination, or efficient HVAC solutions, I can provide engineering support that ensures safety, sustainability, and cost-effectiveness.

Professional Engineer with a focus on MEP/Transportation. Design focus includes site electrical infrastructure, building interior electrical systems and electrical overhead and underground utility de... Read more

Professional Engineer with a focus on MEP/Transportation. Design focus includes site electrical infrastructure, building interior electrical systems and electrical overhead and underground utility design. Typical product includes construction drawings and/or calculations. Electrical design skills include the following: - Electrical equipment fit-out and specifications - Cable, conduit and equipment sizing, protection and installation - Site electrical utility layout and infrastructure - Construction cost estimation - Interior and exterior lighting design - Design compliance in accordance with the National Electric Code or National Electric Safety Code - Familiarity with public agency design standards and requirements Previous projects in the following sectors: - Parks and public spaces - Building restorations - New housing development - Streetscape and roadway improvements - Rail systems infrastructure - Electric utility infrastructure - Marinas - Decorative sign and structure lighting Based out of New York City area.

-12 years AutoCAD 2D/3D & MEP -7 years Autodesk Revit -Architectural Drawings, Plans, Elevations, Sections & Details -Plumbing Plans, Riser Diagrams, Design & Calcs, Coordination

-12 years AutoCAD 2D/3D & MEP -7 years Autodesk Revit -Architectural Drawings, Plans, Elevations, Sections & Details -Plumbing Plans, Riser Diagrams, Design & Calcs, Coordination

I specialize in the architectural, structural and MEP design of residential and commercial buildings in the US. I provide a full set of detailed drawings according to design requirements and building... Read more

I specialize in the architectural, structural and MEP design of residential and commercial buildings in the US. I provide a full set of detailed drawings according to design requirements and building codes, and I ensure that all drawings are permit-ready.

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling an... Read more

I am an engineer with a broad background of knowledge based on work experience. Starting my career in Aeronautical Engineering for almost two years developing skills in ProE designing, modeling and testing of materials and their implementation. Previous designs in the field of aerospace engineering include the design of a high pressure air system required to test a flight vehicle in high altitude conditions. The high pressure air system required pressure vessels to sustain the operation of the test, and were calculated to be too costly, however using recycled vessels were considered. The recycled vessels then needed to be tested before being put into service on the system. This meant cutting several critical failure sections of the pressure vessel and sending it for tensile, compression, modulus lab data. This data would then need to be scrutinized to the calculated data based on pressure vessel code and good design practice, safety factors etc. The delivery system was then modeled in ProE Creo software to be delivered to in-house machinists for material ordering and assembly, but not until modeled in AnSYS modeling comparison. This system was successfully commissioned by a engineering team effort with my design engineering assistance. Creating databases to clearly log product data, quality reports, team performance, and work load is also one of my skills using Microsoft Office Access. The custom code i wrote in VBA to easily track and print weekly data that would be discussed at design meetings in an effort to improve overall team efficiency. Using ProE to design flight vehicles for test models was also a key piece of experience to tune my design experience in fluid dynamics. As the design went from pencil and paper theoretical calculations, they were transformed into models, later tested by my team and then a full size model delivered to the customer, NASA, for field testing. Many points of aeronautical engineering experience resides in the modeling done in ProE Creo/Wildfire to develop testing models. My mechanical engineering design experience comes from a firm mostly pitched towards the development of public & private schools. We design the mechanical, HVAC, electrical, plumbing and fire protection, and civil systems. All of the engineering is done "in the same house" as the architectural design. My experience circumvents all of the engineering trades in accordance with NYS education code, the supplements, and the current IMC. Designing systems in my current atmosphere allow for the full design to be implemented without value engineering the design like an EPC. Though EPC's are also part of the job. Mechanically, I have designed HW/Steam boiler rooms, AHU systems, VRF, and the like. My fire protection experience stemmed from my family business, meaning i physically installed many types of plumbing systems and fire protection systems; it is a critical component to influence my design practice in HASS and/or AutoCAD. Many engineers call it "the third eye." My plumbing design experience resides in all types of waste and domestic systems for commercial kitchens, assisted living facilities, schools, large residences and small, also churches. As much as possible, I use my local contacts in the gas, electrical and water utilities to make my designs as solid as possible. All of my MEP & FPE design are based on maintaining code requirements while not having the customer pay for unnecessary equipment etc.

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and... Read more

Motivated and experienced mechanical engineer and proficient drafter with over 11 years of experience in HVAC and piping system design and drafting. Experienced in energy analysis, thermodynamics, and heat transfer analysis.

-5 years of MEP BIM modeling and coordination experience in NYC. -Specialized in Plumbing and Sprinkler coordination and shop drawing preparation for use in construction. -High rise residential, comme... Read more

-5 years of MEP BIM modeling and coordination experience in NYC. -Specialized in Plumbing and Sprinkler coordination and shop drawing preparation for use in construction. -High rise residential, commercial and educational buildings. Completed projects vary from 8 stories to 60 stories. - Ability to translate single line MEP design drawings to full 3D models for construction. - penetration drawings, horizontal overhead drawings, 3D sketches for construction