Hire BIM Coordination Designers in United States

Since 1995 I have been a CAD designer, assistant manager of 2 drafting departments, a Senior Designer and Project Architect, and am now working in both AutoCAD and Revit, along with Navisworks and a b... Read more

Since 1995 I have been a CAD designer, assistant manager of 2 drafting departments, a Senior Designer and Project Architect, and am now working in both AutoCAD and Revit, along with Navisworks and a bit of Sketchup. Many of my projects are now in the built environment all over the southern U.S.A. and there's no signs of stopping! I hold A.S. degrees in Architectural Design technology and Building Construction technology, and am casually working toward a third one in Engineering Design technology - so yes I have also done some projects in Solidworks and Inventor. I am also a regular contributor in the Autodesk forums, as Bob Zurunkle and am one of their Autodesk Elite.

Hi, I’m Denis—a licensed architect with over 15 years of experience in the architecture and construction industry, and 20+ years working in Revit. I specialize in Revit-based drafting, BIM modeling, c... Read more

Hi, I’m Denis—a licensed architect with over 15 years of experience in the architecture and construction industry, and 20+ years working in Revit. I specialize in Revit-based drafting, BIM modeling, construction drawings, and parametric family creation for clients across residential, commercial, and institutional sectors. 🔧 My Expertise Includes: Revit Modeling & Drafting – Floor plans, elevations, sections, roof plans, and site plans Construction Documentation – Permit and bid-ready drawing sets, shop drawings, and redline updates BIM Coordination – Clash detection, consultant coordination, and model QA/QC Custom Revit Families – Fully parametric, shared parameters, and visibility controls CAD Conversions – Converting sketches or PDFs into clean 2D or 3D Revit/CAD files Material Takeoffs & Estimates – Quantity reports for residential and light commercial projects Sustainability Support – LEED, WELL, and Passive House-ready design workflows I’ve worked with clients ranging from developers and contractors to architecture firms and engineers—providing accurate, fast, and detail-oriented deliverables that align with U.S. drafting standards. 📐 Tools I Use: Autodesk Revit (All Versions) AutoCAD Bluebeam Navisworks Enscape (for visuals) 💬 Let’s collaborate on your next project—message me to get started or invite me to bid on your job!

I am a highly skilled Mechanical Engineer with over two decades of experience, specializing in HVAC and MEP systems design with a keen focus on energy efficiency and strict adherence to ASHRAE standar... Read more

I am a highly skilled Mechanical Engineer with over two decades of experience, specializing in HVAC and MEP systems design with a keen focus on energy efficiency and strict adherence to ASHRAE standards. My expertise extends into the innovative realm of LED lighting product development, where I have honed my abilities in design, prototyping, and manufacturing coordination. Utilizing advanced software such as SOLIDWORKS, AutoCAD, Revit, and HAP, I have successfully delivered complex projects for both residential and commercial buildings, ensuring seamless integration and optimal performance. My career includes significant roles at BV Engineering Inc., where I currently serve as a Contract Mechanical Engineer, designing and optimizing HVAC systems, and at LEDPAX and Mercury Lighting, where I developed cutting-edge linear LED fixtures and components. I have a proven track record of conducting site inspections, providing technical support during construction, and preparing detailed documentation to meet industry standards. My technical proficiency is complemented by my ability to collaborate effectively with architects, contractors, and engineers, ensuring that all projects align with client specifications and regulatory requirements. I have worked with overseas vendors to source materials and oversee production, enhancing my global perspective on engineering challenges. Additionally, my experience includes creating 3D and 2D drawings with ASME Y14.5 and Y14.1 standards, incorporating GD&T, and generating CNC programs for manufacturing processes. At Edison Price Lighting, I collaborated with production engineers to design fixtures that fit existing factory capacities, while at Liquor Bottle Packaging International, I introduced SOLIDWORKS to streamline design processes and trained staff, showcasing my leadership and adaptability. I hold a Bachelor of Science in Mechanical Engineering from Kathmandu University and have completed graduate coursework in Manufacturing Engineering at Wichita State University. As a Certified SOLIDWORKS Professional, I bring a strong educational foundation and continuous learning mindset to my work, staying updated with the latest industry trends, technologies, and regulations. My strengths lie in problem-solving, precision engineering, and a commitment to sustainable design practices. I offer a wide range of services, including HVAC system design, LED fixture prototyping, CAD modeling, and BIM coordination, and I am particularly interested in tackling projects that involve renewable energy integration, advanced lighting technologies, and innovative MEP solutions. My goal is to contribute to projects that not only meet but exceed client expectations, driving forward the future of engineering with creativity and technical excellence. I am eager to explore opportunities that challenge my skills and allow me to apply my diverse experience to new and exciting ventures in the field.

I have spent the past 35+ years providing Architectural design,modeling, CAD support, BIM Management, Coordination, Project Management and other aspects of a project from concept to design to construc... Read more

I have spent the past 35+ years providing Architectural design,modeling, CAD support, BIM Management, Coordination, Project Management and other aspects of a project from concept to design to construction. My roles have included designer, CAD Manager, IT Manager, BIM Manager in various AE firms and national construction companies.

25+years mechanical HVAC/Plumbing experience. Ability to do 2D, 3D and BIM coordination for all mechanical HVAC, Plumbing & Electric

25+years mechanical HVAC/Plumbing experience. Ability to do 2D, 3D and BIM coordination for all mechanical HVAC, Plumbing & Electric

Kevin Martin is a BIM influencer and spreads the knowledge of Building Information Modeling for the AEC industry. He has broad experience and knowledge in BIM and that helps to simplify the BIM Modeli... Read more

Kevin Martin is a BIM influencer and spreads the knowledge of Building Information Modeling for the AEC industry. He has broad experience and knowledge in BIM and that helps to simplify the BIM Modeling for construction.

-12 years AutoCAD 2D/3D & MEP -7 years Autodesk Revit -Architectural Drawings, Plans, Elevations, Sections & Details -Plumbing Plans, Riser Diagrams, Design & Calcs, Coordination

-12 years AutoCAD 2D/3D & MEP -7 years Autodesk Revit -Architectural Drawings, Plans, Elevations, Sections & Details -Plumbing Plans, Riser Diagrams, Design & Calcs, Coordination

10+ years’ in the Mechanical Construction Industry – encompassing Pipefitting, Welding, Field Supervision, BIM Coordination and Project Management positions Management of projects exceeding five mi... Read more

10+ years’ in the Mechanical Construction Industry – encompassing Pipefitting, Welding, Field Supervision, BIM Coordination and Project Management positions Management of projects exceeding five million dollars in single contract value Municipal and Private Sector experience New construction and renovation

Using the latest virtual coordination software our team is able to provide full building coordination for owners and general contractors. With our vast knowledge of Revit we also work with manufacture... Read more

Using the latest virtual coordination software our team is able to provide full building coordination for owners and general contractors. With our vast knowledge of Revit we also work with manufacturers from around the world to create their products for use in the AEC industry by architects and engineers alike. In my spare time I like to spend time with my family, play disc golf, work on my home and play some video games here and there. I also assist my father from time to time moving safes for residential and commercial clients.

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentat... Read more

Hello my name is Juan, i am an Instrument/Electrical Designer with 14yrs of experience. Knoweldgeble in low to medium voltage power distrubution, dcs systems, plc systems, motor controls, instrumentation for midstream & downstream systems. I currently am a partner at ENI Drfting & Design providing 2D,3D Design & Drafting services. We look forward in working with you.

Senior Electrical Designer/VDC (Virtual Design & Construction) Manager with over 18 years of experience at all Design and BIM coordination levels of electrical power, lighting, fire alarm system, comm... Read more

Senior Electrical Designer/VDC (Virtual Design & Construction) Manager with over 18 years of experience at all Design and BIM coordination levels of electrical power, lighting, fire alarm system, communication and photovoltaic systems design. I have been directly involved with designing low voltage systems for buildings, both new facilities and renovations and designed Residential, Commercial, and Industrial for State, Federal, and Private sectors. I also have experience designing schools (K-12 and Higher education), Mission Critical (Datacenters), automated Assembly Plants, E911/Public Safety Building, outdoor lighting systems, and electronic security systems, which have included access control, closed circuit television (CCTV), and perimeter security systems.

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours... Read more

In 2002, after high school, I went directly into trade school and earned my AutoCAD Certification. Little did I know that I would be in the AEC field for the next 12 years. I regularly spend 8+ hours a day, working on schools and other similar buildings, making large sums of money for other people, whilst barely making ends meat for all of my hard work. This is the reason I've decided to go freelance. Coordinating electrical systems in building has become my strong suite. Although I went into CAD classes with dreams of making video games and 3D models, I have not been able to find the right the right company or the right location. Alas, I have continued to build complex 3D models for BIM coordination. But, no more! I’m hoping that if you've found this website you have an idea, maybe a hand drawn sketch or two, or even some old drawings that you’d like to have converted to a digital format. Do you want a replacement for that plastic clip that you broke on your car? Why not let me design it for you in 3D so you can have another one (or as many as you want) 3D printed. My personal website is far from complete at the moment, but I will be sharing all of my projects there (with my clients permission of course) as they come in and/or are under the development process. Feel free to ask questions in the comment section below or shoot me an email at: ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒ and I’ll be happy to discuss your project with you.

👋 Hi, I'm Julian – Founder of Drafter Dynamix I'm a freelance MEP drafter and BIM modeler specializing in creating clear, buildable models for mechanical, electrical, and plumbing systems. Through Dr... Read more

👋 Hi, I'm Julian – Founder of Drafter Dynamix I'm a freelance MEP drafter and BIM modeler specializing in creating clear, buildable models for mechanical, electrical, and plumbing systems. Through Drafter Dynamix, I help engineers, designers, and contractors bring their projects to life using Revit and AutoCAD. Whether you need help with redlines, as-builts, or full BIM coordination, I’m here to deliver clean, accurate, and on-time drafting support. ✅ Revit MEP Drafting ✅ AutoCAD Plans & Details ✅ LOD 300+ BIM Models ✅ Fast Turnaround, Easy Communication Let’s get your project done right.

I have been in the BIM industry for about 9 years now and have worked for multiple companies ranging from a BIM operator to BIM Specialist. I have created shop drawings for field installations and als... Read more

I have been in the BIM industry for about 9 years now and have worked for multiple companies ranging from a BIM operator to BIM Specialist. I have created shop drawings for field installations and also assisted a company get up to speed with Revit. I have worked with multiple trades ranging from electrical, fire protection and low voltage.

I am an Architectural Designer, Revit and AutoCAD Specialist with a strong background in Building Information Modeling, MEP Design and Modeling, Structural Design and Modeling and Architectural Desi... Read more

I am an Architectural Designer, Revit and AutoCAD Specialist with a strong background in Building Information Modeling, MEP Design and Modeling, Structural Design and Modeling and Architectural Design. Throughout my career I have been highly successful at managing projects on schedule and within budget. I have over 6 years of professional experience designing using Revit and AutoCAD for Architectural, Structural, and MEP. During my professional career I have had the opportunity to lead a group of Designers and Engineers as a BIM Manager and have been project lead on several BIM projects ranging from Residential, Commerical, Healthcare, Universities, and K-12. From there I moved on to opening my own business running a CAD and BIM services firm. I enjoy every aspect of design as I get to use my creativity and intellectual ability to showcase my skill set on a vast majority of projects.

I graduated in 2002 and started my career as a piping designer. I worked directly with a mechanical engineer in large projects in retail stores, industrial manufacturing plants, commercial office bui... Read more

I graduated in 2002 and started my career as a piping designer. I worked directly with a mechanical engineer in large projects in retail stores, industrial manufacturing plants, commercial office buildings, and schools. After 3 years I moved to an HVAC designing position, designing and drawing HVAC systems for permit and construction. After the economic hit in the late 2000's I moved to a software management position. Currently I oversee, support, and control all of our BIM software, which includes AutoCAD, Navisworks, Revit, Fabrication CADmep, Fabrication ESTmep, and Fabrication CADduct. I've developed our processes and procedures, along with the entire BIM coordination workflow.

Was born in Ukraine, 1999-2004 - Lviv Polytechnic University, Ukraine 2004-2008- Lviv Regional Architectural Production and Planning Bureau 2012-2013- Vermont Heating and Ventilation, Inc, USA 2... Read more

Was born in Ukraine, 1999-2004 - Lviv Polytechnic University, Ukraine 2004-2008- Lviv Regional Architectural Production and Planning Bureau 2012-2013- Vermont Heating and Ventilation, Inc, USA 2013-2018- Vermont Mechanical, Inc, USA 2019- Engineer In Training License

Revit Modeler and Clash Detection specialist with 3 years experience in a range of commercial and industrial-lite projects.

Revit Modeler and Clash Detection specialist with 3 years experience in a range of commercial and industrial-lite projects.

I'm Ar. Ankit Kansara, the driving force behind Virtual Building Studio as its Founder & CEO. Our mission is as crystal clear as a blueprint: we're here to empower AEC professionals with seamlessly in... Read more

I'm Ar. Ankit Kansara, the driving force behind Virtual Building Studio as its Founder & CEO. Our mission is as crystal clear as a blueprint: we're here to empower AEC professionals with seamlessly integrated, innovative, and cost-effective BIM modeling services. From BIM Coordination Services, MEP BIM services, and Value Engineering, we've got the full spectrum of BIM expertise under one roof.

I have over 5 years of experience with AutoCAD (From 2007-2017 Versions) doing 2D Schematic/ layout & 2D/3D detail drawings for a flooring contractor in the NY/NJ area. I have about 2 years of experie... Read more

I have over 5 years of experience with AutoCAD (From 2007-2017 Versions) doing 2D Schematic/ layout & 2D/3D detail drawings for a flooring contractor in the NY/NJ area. I have about 2 years of experience using Revit & Revit Architecture for BIM Coordination Purposes. I can dedicate 5 hours on weekdays along with whatever time is required on Saturdays and Sundays.

I am committed to delivering high-quality drafting services with attention to detail and coordination excellence. Whether you need support with redlines, shop drawings, BIM coordination, or full-scale... Read more

I am committed to delivering high-quality drafting services with attention to detail and coordination excellence. Whether you need support with redlines, shop drawings, BIM coordination, or full-scale electrical layouts, I’m ready to help bring your project to life. Key skills include BIM 360 collaboration, Navisworks clash detection and coordination, and the ability to integrate seamlessly with multi-disciplinary teams to deliver timely, coordinated, and compliant designs.