Hire Prototyping Designers in Turkey

www,celalettintoprak,com I design real products that get manufactured - not just 3D models. Manufacturing-ready CAD, prototyping, and Design for Manufacturing (DFM)-driven product development for ind... Read more

www,celalettintoprak,com I design real products that get manufactured - not just 3D models. Manufacturing-ready CAD, prototyping, and Design for Manufacturing (DFM)-driven product development for industrial and consumer products. I’m an Engineer and Industrial Product Designer focused on manufacturing-driven product development. My background spans automotive, industrial, and consumer products, where I’ve worked as a Product Developer, Designer, and Technical Lead in production-oriented environments. I don’t approach projects as isolated design tasks. I approach them as systems that must survive prototyping, manufacturing, assembly, cost pressure, and real-world use. 📐 What You Can Expect Working With Me: - Clear, structured CAD suitable for iteration and production - Design decisions informed by manufacturing reality - Practical communication with engineers, suppliers, and manufacturers - Honest feasibility feedback (go / no-go when needed) - Designs meant to be tested, not just rendered 📐 Core Capabilities: - 3D CAD modeling (Siemens NX) - 2D technical drawings (AutoCAD Professional) - CNC, laser cutting, and sheet metal preparation - Injection molding–ready part design - Fixture, bracket, and assembly design - BOM creation and production planning support - Reverse engineering and scan-based modeling 📐 Injection Mold & Manufacturing Experience I have hands-on experience designing plastic injection molds and mold-ready parts, including projects for automotive and food-related products. ⚙️ I’m familiar with: - Injection molding–ready design, Core / cavity logic - Draft angles & wall thickness optimization - Parting lines and shut-off surfaces - Shrinkage and material behavior - Gate concepts (hot runner, valve gate) - Collaboration with mold makers and CNC shops - Design for Assembly (DFA), production validation - Engineering-driven product development - Long-term product roadmap support My focus is always on tool longevity, cycle time, surface quality, and cost efficiency. 📏 Typical Projects I Work On: - Automotive accessories and aftermarket products - Mechanically complex plastic or metal parts - Prototyping-heavy product development - Production validation before tooling - Redesigns for cost reduction or manufacturability - CAD clean-up and production conversion 📌 Primary CAD Tool: Siemens NX, AutoCAD and Geomagic Design X I work primarily in Siemens NX, which is widely used in high-end automotive and industrial manufacturing. I can deliver clean, fully editable STEP / STL / Parasolid files, and I regularly convert and work with SolidWorks, Fusion 360, Rhino, SketchUp, and scan-based data. If you use SolidWorks or another CAD system, this is not a limitation — deliverables are always production-ready and compatible. 📌 If you need more than a modeler—someone who understands how products are actually built and scaled—I can support your project from concept to production readiness.

I'm a mechanical engineering student at Istanbul Technical University and I work as a freelance CAD designer. Most of what I do is mechanical parts, product concepts and manufacturing-ready 3D models.... Read more

I'm a mechanical engineering student at Istanbul Technical University and I work as a freelance CAD designer. Most of what I do is mechanical parts, product concepts and manufacturing-ready 3D models. What I work on most often: • 3D modelling and assemblies in SolidWorks and Fusion 360 • 2D manufacturing and shop drawings — dimensions, tolerances, BOMs, cut lists (AutoCAD, SolidWorks, Fusion 360) • Sketch, photo or PDF to CAD, and reverse engineering from 3D scans • Structural FEA in ANSYS Workbench: static structural, modal analysis, topology optimization • Design for 3D printing and print-ready STEP/STL files I spent five months as a design engineering intern at TU Wien, in the additive manufacturing group of the Institute for Production Engineering and Photonic Technologies, working on CAD redesign, generative design and FDM prototyping. I also designed and printed the mechanical structure of a 5-DOF robotic arm, so I have had my own parts fail a fit test and had to fix them. Before I start modelling I ask how the part will be made, because machining, printing and sheet metal each pull the geometry in a different direction. You get the files in the formats you asked for, drawings someone can actually build from, and a clear note if I think something in the design will cause trouble later. I work in English, German and Turkish.

Mechanical Design Engineer | Industrial Machinery & Sheet Metal Expert (7+ Years) SolidWorks Certified Professional. Familiar with ASME and ISO standards for manufacturing-ready drawings I am a Mecha... Read more

Mechanical Design Engineer | Industrial Machinery & Sheet Metal Expert (7+ Years) SolidWorks Certified Professional. Familiar with ASME and ISO standards for manufacturing-ready drawings I am a Mechanical Engineer with over 7 years of hands on experience in designing industrial machinery and manufacturing-ready products. My expertise ranges from heavyduty textile and food processing equipment to precise sheet metal fabrications like elevator cabins. I specialize in taking projects from concept to manufacturing, ensuring high precision, cost-efficiency, and ease of assembly using SolidWorks. My Core Expertise: Industrial Machinery Design: Textile: R&D and design for Stenter machines (Ram), Continuous Tumbler Dryers, and fabric finishing lines. Deep knowledge of pneumatic systems and chain drive mechanisms. Food Processing: Designing Coffee Roasters, continuous roasting ovens, and automated dosing systems. Proficient in thermal calculations and food-grade material selection. Sheet Metal & Product Design: Creating manufacturing-ready drawings (DXF/BOM) for laser cutting and bending. Specialized in Elevator Cabins, modular enclosures, and decorative metal products (fire pits, wall art). Engineering Analysis (FEA): Performing Static, Thermal, and Airflow simulations to validate designs before production, reducing prototyping costs. Tools: SolidWorks, AutoCAD, KeyShot (Rendering). Whether you need a complex machine assembly, a detailed fabrication drawing, or a structural analysis, I deliver engineering solutions that work in the real world, not just on the screen.

I am a CSWP-certified mechanical designer with hands-on CNC manufacturing experience. I turn sketches, concepts, reference images, and existing CAD files into accurate, production-ready mechanical des... Read more

I am a CSWP-certified mechanical designer with hands-on CNC manufacturing experience. I turn sketches, concepts, reference images, and existing CAD files into accurate, production-ready mechanical designs. I do not focus only on creating models that look correct. I consider real manufacturing conditions from the beginning, including tool access, machining setups, tolerances, fits, wall thickness, fastening methods, assembly requirements, material selection, and production cost. My services include: • Parametric SolidWorks part and assembly design • CNC machining DFM and design optimization • Manufacturing drawings, GD&T, tolerances, and BOMs • Fixtures, machine components, enclosures, and sheet-metal parts • Functional parts designed for 3D printing and prototyping • Reverse engineering, CAD cleanup, and design modifications • Interference, clearance, and assembly checks I regularly deliver organized SLDPRT, SLDASM, SLDDRW, STEP, STL, DXF, and PDF files. My goal is to provide clear, practical, and manufacturable designs that can move smoothly from CAD to production. Send me your sketch, dimensions, reference image, or existing CAD model, and I will help turn it into a reliable production-ready design.

I am a Senior Mechanical Engineer with over 10 years of experience in designing and manufacturing electronic product enclosures and hardware. My expertise spans the full product development lifecycle,... Read more

I am a Senior Mechanical Engineer with over 10 years of experience in designing and manufacturing electronic product enclosures and hardware. My expertise spans the full product development lifecycle, from conceptual design and CAD modeling to production management and quality control. I leverage tools like SolidWorks, CorelDraw, and Keyshot to create innovative designs that meet industry standards while ensuring aesthetic appeal and user-friendly interfaces. If you're looking for a skilled engineer who can bring your product concept to reality with precision and creativity, let's discuss your project. I am ready to help you achieve your goals and exceed your expectations. Mechanical & Industrial Design: - Machine Elements Design, Enclosure & Hardware Design, Body & Chassis Design, Material Selection, Design for Manufacturing and Assembly (DFM/DFA), PCB Mechanical Integration, Electro-Mechanical Compatibility - Visual & Product Design: Photorealistic product rendering and visualization, graphic design & printing preparation, aesthetic design, UI/UX integration for product interfaces. Manufacturing & Production: - CNC Sheet Metal Forming, CNC Machining, CNC Laser Cutting, 3D-Printing, Vacuum Casting, SMC-BMC Molding, Injection Molding, Die Casting, Welding, Surface Treatments, Finishing, Powder Coating, Anodizing, UV Printing - BOM, OPC, FPC, QC, Technical and financial reports, cost/time estimation, Rapid Prototyping, Low-Quantity & Batch Production, Mass Production, AI-assisted Lean Manufacturing Software: - SolidWorks CAD/CAE/CAM, CorelDraw, KeyShot, Solidworks Simulation & Flow Simulation Soft Skills: - Project Management, Contract Negotiation, Technical Communication, Creative Problem Solving, Team Collaboration: Cross-functional coordination with electronic engineers, PCB designers, and product managers for integrated product development.

Senior Mechanical Design Engineer with over 10 years of experience in the OEM and ODM home appliance industry, gained entirely at a globally recognized leading manufacturer. Experienced in guiding pro... Read more

Senior Mechanical Design Engineer with over 10 years of experience in the OEM and ODM home appliance industry, gained entirely at a globally recognized leading manufacturer. Experienced in guiding products through all phases from concept design to mass production with a focus on mechanical design, DFM/DFA, and industrialization (NPI). Contributed significantly to the development and launch of the Philips Airfryer XXL in 2017, one of the earliest and most influential products in its category. Took dual responsibility as mechanical designer and NPI engineer, and was instrumental in solving critical ramp-up challenges that stabilized production and strengthened the Philips-Ernamaş collaboration. Later, led the mechanical design of the company’s ODM airfryer, followed by multiple facelifted models for local brands. Also played a cross-functional role in the Philips Air Steam Fryer project, managing communication across design, manufacturing, and global stakeholders during key project phases. In addition to these large-scale projects, provided targeted mechanical design support for various appliances including coffee machines, hand blenders, and mixers, especially during validation, prototyping, and tooling phases. Recognized for problem ownership, cross-disciplinary coordination, and delivering functional, manufacturable solutions under pressure. In total, I’ve taken part in the design or release of over 25 products, from airfryers to small domestic appliances, across both OEM and ODM collaborations.

I am a self-driven mechanical designer with a strong foundation in mechatronics and advanced mechanical design, developed through hands-on practice and real industrial projects. I have nearly one year... Read more

I am a self-driven mechanical designer with a strong foundation in mechatronics and advanced mechanical design, developed through hands-on practice and real industrial projects. I have nearly one year of professional experience at a company specializing in rubber processing machinery, where I contributed to the design and development of machines such as Open Mixing Mills, Sigma Mixers, and Banbury Mixers. Throughout this experience, I worked extensively with SolidWorks to design mechanical systems and metal components, with a strong focus on manufacturing constraints, tolerances, and assembly logic. I am comfortable designing parts intended for machining, welding, and industrial assembly, and I have a solid understanding of mechanical fits and tolerancing practices. In addition to industrial machinery design, I have experience with 3D printing and rapid prototyping, enabling efficient design validation and a practical design-for-manufacturing mindset. I am particularly interested in remote mechanical design work, where I can deliver reliable, detail-oriented solutions while continuing to grow as a mechanical designer.

Structural and mechanical design engineer (MSc) with 25 years of experience, running my own engineering office in Istanbul since 2018. WHAT I DO - Product development: concept development, prototypin... Read more

Structural and mechanical design engineer (MSc) with 25 years of experience, running my own engineering office in Istanbul since 2018. WHAT I DO - Product development: concept development, prototyping, reverse engineering and design for manufacturing - Mechanical, machine and robot design: for example CHRAK, a smart tool-cart robot that follows its operator, with motorised drawers and voice control (built units exhibited at a trade fair) - 3D CAD models, assemblies, manufacturing drawings, renders and assembly animations (Fusion 360, Rhino, AutoCAD) - Structural analysis and FEA directly from your STEP/CAD model (Altair SimSolid, Ansys, SAP2000, RFEM): steel silos and hoppers, industrial steel structures, equipment platforms, frames and chassis - Medical device, automotive and consumer product assemblies; packaging; kiosks and play equipment - Boats, tiny houses and caravans: design and structure checks - Custom engineering calculation tools in Python Background: project manager, site manager and resident engineer on large construction and World Bank / EIB-funded projects, investment-project manager for 23 industrial companies. Confidential design work for defence-industry companies under NDA. Clear communication, fast turnaround and manufacturing-ready deliverables.

I have completed 400+ projects on ▒▒▒▒▒▒ delivering manufacturable designs My services include: • CNC machined mechanical components (STEP, SolidWorks) • Sheet metal design for laser cutting & bending... Read more

I have completed 400+ projects on ▒▒▒▒▒▒ delivering manufacturable designs My services include: • CNC machined mechanical components (STEP, SolidWorks) • Sheet metal design for laser cutting & bending (DXF/DWG flat patterns) • 2D engineering drawings with tolerances, GD&T and BOM • 3D printing and rapid prototyping models (STL/STEP) • Industrial structures, frames, tanks and piping assemblies

Welcome to my profile. I am Erol Alkaya, the Founder and Lead Industrial Designer of Helix Design Studio. With extensive experience in mechanical engineering and product development, I bridge the crit... Read more

Welcome to my profile. I am Erol Alkaya, the Founder and Lead Industrial Designer of Helix Design Studio. With extensive experience in mechanical engineering and product development, I bridge the critical gap between conceptual ideas and the actual production floor. I don't just draw 3D shapes; I engineer functional, production-ready parametric solids. Whether you are an inventor looking to prototype a new consumer product, or a manufacturer needing high-precision reverse engineering from 3D scan data, I provide solutions built on strict Design for Manufacturing (DFM) principles. I approach every project with a toolmaker's perspective. My Core Expertise Includes: High-Precision Reverse Engineering (Scan-to-CAD): Expert-level workflow using Geomagic Design X and SolidWorks to convert dense STL/OBJ scan data into clean, fully editable parametric models. I provide 3D deviation analysis (heat maps) to guarantee dimensional accuracy. Plastic Injection Molding & DFM: Deep knowledge of tooling requirements, including draft angles, uniform wall thickness, sink mark prevention, undercut resolution, and mechanical assembly features (snap-fits, screw bosses). 3D Printing & Prototyping Optimization: Engineering complex, multi-part assemblies, interlocking joints, and smart sectioning for FDM, SLA, and SLS additive manufacturing. Professional Deliverables: Supplying native, feature-based SolidWorks assemblies, watertight neutral formats (STEP, IGES), and comprehensive 2D technical production drawings. When you collaborate with Helix Design Studio, you are partnering with an engineer who ensures your product is designed to fit, function, and manufacture flawlessly without costly downstream errors. Let’s discuss your project and bring your engineering data to life.

Mechatronics Engineer | Electronics • Embedded Systems • Power Electronics • Control & Optimization • 3D Design I have strong expertise in electronics, control & optimization, and embedded software d... Read more

Mechatronics Engineer | Electronics • Embedded Systems • Power Electronics • Control & Optimization • 3D Design I have strong expertise in electronics, control & optimization, and embedded software development. My passion is transforming complex ideas into functional, reliable, and innovative systems. From PCB design and firmware development to 3D mechanical modeling and complete system integration, I can deliver end-to-end solutions. 🚀 Areas of Experience: Custom CNC hardware and firmware development High-power motor driver design with advanced protection features EEG-based medical device prototyping and testing Scalable Battery Management Systems (BMS) for large LiFePO4 packs 🔧 What sets me apart: Combining creativity with engineering discipline Not just designing, but delivering tested and ready-to-use solutions Strong focus on on-time delivery and high-quality results Whether you need a prototype, CAD design, or a complete electronic-mechanical system, I am here to bring your vision to life.

am a senior mechanical design and analysis engineer with over 6 years of hands-on experience in the defense industry. Throughout my career, I have managed full-cycle product development — from initial... Read more

am a senior mechanical design and analysis engineer with over 6 years of hands-on experience in the defense industry. Throughout my career, I have managed full-cycle product development — from initial concept to production — with deep involvement in: 3D Mechanical Design (Creo) Finite Element Analysis (FEA) using Ansys, HyperMesh, and HyperWorks Technical drawings and GD&T Design for Manufacturing (DFM) Material selection, tolerance analysis, and prototyping Collaboration with cross-functional teams in high-stakes projects I have led multiple projects in environments where precision, reliability, and performance are non-negotiable. My designs have been successfully transitioned into mass production and field deployment, meeting strict defense and quality standards. Software Proficiency Creo (Expert level) Ansys Mechanical (FEA) HyperMesh & HyperWorks (Pre/post-processing, meshing, linear/nonlinear analysis) What I Can Do for You Turn concepts or rough sketches into fully detailed CAD models Run structural, thermal, or dynamic simulations with accurate reports Prepare complete technical documentation for manufacturing Optimize designs for weight, cost, and manufacturability

I specialize in mechanical design with a focus on real-world manufacturability. With over 15 years of experience in machine design and 5 years hands-on machining background, I understand both the digi... Read more

I specialize in mechanical design with a focus on real-world manufacturability. With over 15 years of experience in machine design and 5 years hands-on machining background, I understand both the digital and physical aspects of product development. I provide freelance design services including 3D modeling, mechanical prototyping, and production-ready documentation. You can explore examples of my work in the portfolio section. - Machine Design - Sheet metal,manufacturing/machining, painting and coating - Manage a project from start to finish - Check and correct a faulty project - Made technical drawings and details of a designed project - Designing industrial machines, construction machines and military machines - Worked in the R&D and P&D fields

Mechanical design engineer specializing in 3D CAD modeling, product development, and thermal-fluid flow simulations. I translate concept sketches, mechanical requirements, and functional specification... Read more

Mechanical design engineer specializing in 3D CAD modeling, product development, and thermal-fluid flow simulations. I translate concept sketches, mechanical requirements, and functional specifications into production-ready digital models and verified prototypes. Core Capabilities 3D Parametric CAD Modeling: Complex mechanical assemblies, custom component design, sheet metal enclosures, and consumer product casings designed with clean, fully editable feature trees in SolidWorks. CFD & Thermal Analysis: Internal and external fluid flow analysis, aerodynamic optimization, and conjugate heat transfer simulation (heat exchangers, thermal management, airfoils, and energy systems) to validate performance before physical tooling. Manufacturing & Production Drafting: Fully detailed 2D fabrication drawings adhering to standard drafting guidelines (ASME/ISO), complete with GD&T, tolerance stack-up considerations, exploded views, and Bills of Materials (BOM). Prototyping & DFM: Design for Additive Manufacturing (3D printing/rapid prototyping), CNC machining, and sheet metal fabrication to ensure parts can actually be manufactured cost-effectively. Deliverables Provided Native CAD files: .SLDPRT, .SLDASM Universal exchange formats: .STEP, .IGES, .X_T (Parasolid) Manufacturing & fabrication packages: .DXF, .DWG, high-resolution .PDF drafting sheets Prototyping files: Clean, watertight .STL and .OBJ meshes ready for 3D printing Engineering reports: High-resolution flow trajectories, cut plots, and performance summaries for simulation tasks Clear communication, rapid turnaround, and robust design intent are the priorities on every milestone. Send over a message with your project scope, initial sketches, or technical specs to discuss next steps.

Mechatronics Engineer with hands-on experience in industrial machinery design, embedded systems integration, and FPGA hardware validation. Skilled at bridging physical mechanics and digital control, w... Read more

Mechatronics Engineer with hands-on experience in industrial machinery design, embedded systems integration, and FPGA hardware validation. Skilled at bridging physical mechanics and digital control, with practical expertise in reverse engineering, parametric CAD modeling (SolidWorks), sheet metal & weldment design, GD&T, and design automation. Professional highlights: reverse-engineered and redesigned ~15 industrial production machines using SolidWorks, built VBA/API macros that cut a manual engineering workflow from hours to minutes, and led multidisciplinary robotics projects end to end (mechanical design, embedded control, and field testing). Available for freelance CAD/mechanical design, technical drawings & GD&T documentation, reverse engineering, and embedded/FPGA prototyping projects. Clear communicator, reliable on deadlines, and comfortable working directly with clients in English, Arabic and Turkish.

I am a mechatronics technician and I specialize in professional CAD (Computer-Aided Design) project design. I am skilled in bringing together the mechanical, electronic, and computer sciences required... Read more

I am a mechatronics technician and I specialize in professional CAD (Computer-Aided Design) project design. I am skilled in bringing together the mechanical, electronic, and computer sciences required for mechatronics engineering to develop creative and innovative solutions. I excel in the modeling, analysis, and simulation of complex mechanical systems in project design. Using CAD software, I create detailed technical drawings and 3D models. In this context, I have extensive experience with advanced software such as SolidWorks, AutoCAD, Siemens NX, and similar programs. I play an active role in every stage of the production process, from design to prototyping, product development to mass production. I am meticulous in developing projects that are compliant with engineering standards and manufacturable. I have participated in various industrial projects and developed custom solutions for different sectors, including automotive, defense industry, consumer electronics, and automation systems. I am adept at teamwork and work in coordination with multidisciplinary teams to contribute to the successful completion of projects. Additionally, I aim to create innovative and sustainable design solutions that are cost-effective and environmentally friendly.

Mechanical Design Engineer with hands-on experience in industrial filling and packaging machinery, spanning design, prototyping, and maintenance. I founded Wrench-Tech Engineering, an early-stage eng... Read more

Mechanical Design Engineer with hands-on experience in industrial filling and packaging machinery, spanning design, prototyping, and maintenance. I founded Wrench-Tech Engineering, an early-stage engineering studio specializing in industrial machine design, rapid prototyping, and 3D printing, with a focus on servo-driven liquid filling production lines for clients across Turkey, Egypt, and the MENA region. My work has taken designs from concept through to working prototypes and real client delivery — including a pneumatic shut-off (diving) nozzle for servo-piston filling machines, built and delivered to a client. Alongside this, I bring practical, floor-level experience maintaining and modifying pneumatic automatic and semi-automatic filling and packaging machines for liquid and powder lines — including designing, manufacturing, and installing custom parts to adapt machines for new fill sizes.

Mechanical Engineer and Industrial Designer with a strong focus on real-world product development and manufacturable design. Experienced in taking projects from concept to production across consumer p... Read more

Mechanical Engineer and Industrial Designer with a strong focus on real-world product development and manufacturable design. Experienced in taking projects from concept to production across consumer products, industrial systems, automotive components, and hardware devices. Skilled in 3D CAD (Fusion 360, Inventor, SolidWorks), technical drawings, sheet metal design, injection molding, and DFM/DFA, with a deep understanding of materials, tolerances, and production processes. Operates a fully equipped private workshop, enabling rapid prototyping, testing, and iteration. This allows me to deliver validated, production-ready solutions, not just digital models. Experienced in working with international clients, suppliers, and manufacturers, translating design intent into clear, executable documentation and efficient production workflows. Strong problem-solver with a hands-on mindset, focused on delivering practical, high-quality results.

I'm an aerospace engineer with 4 years of hands-on UAV development experience, covering the full path from concept to flying hardware: aerodynamic design, CFD, structural layout, CAD, composite manufa... Read more

I'm an aerospace engineer with 4 years of hands-on UAV development experience, covering the full path from concept to flying hardware: aerodynamic design, CFD, structural layout, CAD, composite manufacturing, and flight testing. I've designed and delivered fixed-wing, VTOL quadplane, WIG (wing-in-ground effect, water-launched) and tethered aerostat platforms. On the WIG project I ran 20+ design iterations and hundreds of simulations to take a 9.2 kg MTOW aircraft from concept to a flying prototype, then flew 50+ flight tests myself as the test pilot. As R&D lead on a 12-person team I cut platform cost by 30% and weight by 15% through iterative redesign driven by test data. What I can deliver for you: • 3D CAD models and assemblies (SolidWorks, CATIA, Siemens NX) built for manufacture, not just for looks • CFD analysis and reporting in ANSYS Fluent/CFX — lift, drag, stability, control surface sizing • Aerodynamic sizing and flight mechanics calculations (XFLR5, Digital DATCOM) • Design for composite manufacturing, prototyping and assembly • Requirements documentation, BOMs, test plans and test reports I work in English (C2) and I'd rather ask one clarifying question up front than deliver something that misses what you actually needed.

I am a Senior Mechanical Design, Product Development, and Manufacturing Engineer with over 20 years of experience transforming innovative ideas into production-ready products and efficient manufacturi... Read more

I am a Senior Mechanical Design, Product Development, and Manufacturing Engineer with over 20 years of experience transforming innovative ideas into production-ready products and efficient manufacturing solutions.** **My expertise spans the entire product development process, from concept design and 3D CAD modeling to engineering analysis, Design for Manufacturing (DFM), prototyping, tooling design, production line development, and manufacturing optimization.** **I specialize in plastic injection molds, progressive and stamping dies, die casting molds, silicone and rubber molds, precision tooling, fixtures, jigs, and automated production systems.** **As an Engineering and R&D Manager, I have led multidisciplinary teams in developing innovative products, optimizing manufacturing processes, reducing production costs, improving product quality, and accelerating time-to-market for automotive, industrial, medical, and consumer products.** **Proficient in CATIA V5 and AutoCAD, I focus on delivering practical, innovative, and cost-effective engineering solutions that are fully optimized for manufacturing, quality, and long-term reliability.**

I’m an R&D-focused mechanical and harness design engineer with cross-disciplinary experience in mechanical systems, 2D/3D electrical harness integration, and materials engineering. Skilled in CAD/CAM... Read more

I’m an R&D-focused mechanical and harness design engineer with cross-disciplinary experience in mechanical systems, 2D/3D electrical harness integration, and materials engineering. Skilled in CAD/CAM workflows using tools like CATIA V5, Fusion 360, and SolidWorks, I’ve contributed to the development and integration of complex subsystems for defense systems. Through my master’s studies, I’ve built a strong foundation in mechanical design and materials selection, while my hands-on experience has given me a practical understanding of prototyping and manufacturing. I have prepared and presented design documentation such as PDR/CDR documentation as part of multi-disciplinary teams. I am fluent in English.

I help startups, product teams, and engineering clients turn ideas into practical mechanical designs, engineering analyses, and working prototypes. I’m a Mechatronics Engineer with experience across... Read more

I help startups, product teams, and engineering clients turn ideas into practical mechanical designs, engineering analyses, and working prototypes. I’m a Mechatronics Engineer with experience across mechanical design, CAD, FEA/CAE, R&D, prototyping, embedded systems, and software/app development. My background allows me to approach projects from both the physical engineering and digital development sides. My core engineering work includes: • Mechanical design and 3D CAD modeling • Engineering drawings and design documentation • Finite Element Analysis (FEA) and structural analysis • 2D CFD-related engineering studies and simulation work • Product development and prototyping • Design evaluation and engineering problem solving • ANSYS, Fusion 360, SolidWorks and related engineering workflows I also build functional prototypes and software tools, combining embedded systems, automation, AI-assisted development, and modern app development workflows when a project requires more than mechanical design alone. My approach is straightforward: understand the engineering problem first, build the right model or prototype, validate the result, and communicate the work clearly. I’m comfortable working from an existing CAD model, technical documentation, rough concept, sketch, requirements, or an early-stage product idea. Whether you need a mechanical component modeled, a design analyzed with FEA, a product concept developed, or a technical prototype brought to life, I can help take the project from concept toward a practical result.

I am a Aerospace Engineering student with strong experience in technical 3D CAD design. I specialize in creating detailed mechanical parts, assemblies, and manufacturing-ready drawings using SolidWork... Read more

I am a Aerospace Engineering student with strong experience in technical 3D CAD design. I specialize in creating detailed mechanical parts, assemblies, and manufacturing-ready drawings using SolidWorks and Fusion 360. have contributed to multiple UAV (Unmanned Aerial Vehicle) projects, focusing on lightweight structural design, aerodynamic optimization, and composite manufacturing. My work has earned awards in national competitions, and I am experienced in both prototyping and final product delivery.

Hello, I am a Mechanical Design Engineer with over 8 years of experience in construction design for electrical home appliances. I hold a degree in Industrial Design Engineering from Varna Technical U... Read more

Hello, I am a Mechanical Design Engineer with over 8 years of experience in construction design for electrical home appliances. I hold a degree in Industrial Design Engineering from Varna Technical University. I specialize in plastic part design, injection molding, and design for manufacturing (DFM). I have strong hands-on expertise in engineering plastics, 3D prototyping, and CNC machining processes. I work at an advanced level with Siemens NX, delivering production-ready, optimized, and manufacturable designs. Throughout my career, I have been responsible for full-cycle product development — from concept design to tooling support and mass production readiness. I focus on functionality, cost-efficiency, and long-term product reliability. I would be happy to contribute my expertise to your project and deliver high-quality, manufacturing-ready solutions. Best regards, Serhan

I am a CAD design professional with 9 years experience in Solidworks and 5 years in Fusion 360. My expertise is primarily in mechanical design and mechatronics. I have spent 7 years in institutional c... Read more

I am a CAD design professional with 9 years experience in Solidworks and 5 years in Fusion 360. My expertise is primarily in mechanical design and mechatronics. I have spent 7 years in institutional companies working on medical devices and defence systems. Over the past 7 years, I worked closely with engineers, test firms, software developpers and manufacturing partners . I ca bring your project from idea to mass production line as a package with cost analysis. Furthermore, I have spent the last 4 years honing my skills in 3D printing on professional SLA/FDM printers. This knowledge has given me great insight into designing for additive manufacturing and prototyping of my projects. Additionally, I am a professional PCB designer with Fusion 360 / Eagle. For analysing and simulating systems I am using simulink (connecting with solidworks and embedded systems), ansys and Fluent / icepak, generative design and ntopology to optimize my works

I help startups and manufacturers turn product ideas into real, production-ready products. I’m an Industrial Designer and Product Development Consultant with experience across concept development, 3D... Read more

I help startups and manufacturers turn product ideas into real, production-ready products. I’m an Industrial Designer and Product Development Consultant with experience across concept development, 3D CAD, mechanical/product design, DFM/DFA, prototyping, and manufacturing. My approach combines creative product thinking with engineering and manufacturing realities — so the goal is not just a good-looking model, but a product that can actually be built, tested, refined, and produced. I work closely with clients throughout the process to make sure requirements, design intent, technical constraints, and manufacturing considerations are aligned from the beginning. From concept sketches to manufacturing-ready CAD, I can support the complete product development journey.

I am a Materials Engineering graduate with hands-on experience in SolidWorks, 3D modeling, and product prototyping. I have designed prototype parts from initial concept to printable 3D models and prod... Read more

I am a Materials Engineering graduate with hands-on experience in SolidWorks, 3D modeling, and product prototyping. I have designed prototype parts from initial concept to printable 3D models and produced physical prototypes using 3D printing. My materials science background helps me approach design with consideration for material selection, functionality, and manufacturability. I focus on creating accurate, practical, and well-structured CAD models while continuously improving designs through testing and iteration.