Hire CAD designers & engineers in Torino, Piemonte

Mechanical CAD Designer with more than 4 years of experience in the steel fabrication industry and 6 months in the blow-molding plastics industry. Proficiency with the use of PTC Creo, Onshape, Solidw... Read more

Mechanical CAD Designer with more than 4 years of experience in the steel fabrication industry and 6 months in the blow-molding plastics industry. Proficiency with the use of PTC Creo, Onshape, Solidworks (CSWP) and AutoCAD for design, build, and assembly. Professional, creative, analytical, and highly versatile.

Experienced Design Engineer with a demonstrated history of working in the fast-paced Design Industry. Knowledgeable Designer with extensive modeling and prototyping skills. Responsibly delivered more... Read more

Experienced Design Engineer with a demonstrated history of working in the fast-paced Design Industry. Knowledgeable Designer with extensive modeling and prototyping skills. Responsibly delivered more than 20 clients projects from different verticals with extensive quality and modularity.

I've recently graduated in Aerospace Engineering with a First Class. I have a particular passion for Solidworks, which I've used frequently during my degree in various project. To prove my knowledge a... Read more

I've recently graduated in Aerospace Engineering with a First Class. I have a particular passion for Solidworks, which I've used frequently during my degree in various project. To prove my knowledge and competence with Solidworks I've recently completed the CSWA, the certification for Mechanical Design using Solidworks at the level of Associate.

My name is Lidia Jintcharadze. I am a 26 year old architectural designer and Master's candidate in Architecture and Construction City at Politecnico di Torino. I have three years of professional exper... Read more

My name is Lidia Jintcharadze. I am a 26 year old architectural designer and Master's candidate in Architecture and Construction City at Politecnico di Torino. I have three years of professional experience working on architectural projects in Georgia, covering residential, public infrastructure, and adaptive reuse developments. I work in close collaboration with my fellow architect, Matthew Madi. We met while studying together at Politecnico di Torino, bringing together a rich combination of perspectives, as I am from Georgia and Matthew is from Lebanon. Together, our team speaks 6 languages and brings a balanced, highly responsible approach to every project, combining complementary skills and diverse design viewpoints. We deliver complete project solutions from scratch to fully finished architectural drawings, including detailed plans, photorealistic renderings, and technical documentation. Feel free to contact us to discuss your next project!

I am a Mechanical Designer, i work mainly with Autodesk Inventor. I am very passionate for designing, producing and assembling systems and components. I have a broad experience in Mechanical desig... Read more

I am a Mechanical Designer, i work mainly with Autodesk Inventor. I am very passionate for designing, producing and assembling systems and components. I have a broad experience in Mechanical design, I did my Masters degree at the Polytechnic of Turin, Italy, and my bachelors at PUC,Chile. I am very proactive and I consider myself a hard worker. I always try to do my best and meet the deadlines.

I'm a mechanical engineer who has been working for Fiat Chrysler Automobile for 4 years. In FCA I'm a structural analysis engineer for the powertrain department. I have a deep knowledge of the cyl... Read more

I'm a mechanical engineer who has been working for Fiat Chrysler Automobile for 4 years. In FCA I'm a structural analysis engineer for the powertrain department. I have a deep knowledge of the cylinder head and cylinder block thermostructural analysis using FEM (finite element method) software like Abaqus, Hyperworks and FEMFAT for the LCF and HCF fatigue. In this years I'have increased my casting process knowledge, collaborating with foundry and simulating the residual stress field of different cylinder heads during the water quenching phase with Procast software. FEM Software skills: Abaqus (expert level) Hyperworks (expert level) FEMFAT (expert level) Procast (expert level) Optistruct (expert level for topological optimization) Simulia Isight (expert level for shape optimization) CAD Software skills: Siemens NX (basic level) General Software skills: Excel (expert level) Powerpoint (expert level)

Mathematics and realization some external details for the scooter project "ECOCAR" - LIGHT for the Korean market. -Study feasibility and cross mathematics, mathematical development and design of detai... Read more

Mathematics and realization some external details for the scooter project "ECOCAR" - LIGHT for the Korean market. -Study feasibility and cross mathematics, mathematical development and design of details and overalls of the "IRAN SAIPA 132" bridge components. -Autovaz 2190 "feasibility and mathematical bumper math. - Mathematical development of project components "AUTOVAZ 2190", - Feasibility study, mathematical aesthetic door, storage compartment and relative drawer handle and mathematical development of project components "AUTOVAZ 2190" for Russia project "AUTOVAZ 2190" and 2D - feasibility study airbag mathematization of bridge components "IRAN SAIPA 211" -Study feasibility and design project door panels "IRAN SAIPA 211" .2D (DRAWING) assembly of 3D. - Feasibility study, aesthetic door math, storage compartment and relative drawer handle mathematical development of dashboard components and related subsequent modifications for the project "IRAN SAPCO P405" -2D dashboard (all components) + exploded dashboard + tunnel + bumper + head impacto "IRAN SAPCO P405" direct contact with customer. -2D dashboard (all components) + exploded plank + tunnel + trunk part + door panels (all components) + exploded door panels. -Study feasibility mathematics electric bike for the "TURKISH" + assembly all pieces + 2D. -The helicopter feasibility for China. -Fitnessability / electric bike for Trucchia. -Study mechanical table. Project: alpha romeo QV & Base 9520. (Ug 9 & iman) Project: 164 Ferrari. (Catia v5)

I have a degree in Aerospace Engineering from the Polytechnic University of Turin, Italy. I have experience in CAD design and FEM structural analysis both as a designer and teacher.

I have a degree in Aerospace Engineering from the Polytechnic University of Turin, Italy. I have experience in CAD design and FEM structural analysis both as a designer and teacher.

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direc... Read more

Pipe stress analysis and design engineer with more than eight years of office and field experience in power plant projects (gas and steam turbines, boiler plants), process piping (blast furnace, direct reduction plants, slurry transportation, cryogenic piping, etc.) and oil & gas projects (refineries, oil fields). Developed competences in most important piping codes (including ASME B31.1, ASME B31.3, EN-13480, etc.), and acquired proficiency in all aspects of static and dynamic pipe stress analyses (seismic, PSV transients, water hammer, harmonic vibrations, high-frequency vibrations, etc.) including generating critical line list, preliminary route studies and equipment arrangements, building load cases to satisfy code requirements, support design and analysis and fatigue assessments. In-depth knowledge of piping layout design using 3D software. In addition to pipe stress analysis and piping design, which is the primary field of expertise, during the work at the University of Belgrade (as PhD candidate), developed skills in pressure vessel analysis (ASME VIII-1, ASME VIII-2 and EN-13445), process equipment sizing, process design and optimization, heat and mass transfer calculations, fluid flow calculations (steady state and transient, including interaction with the stress analysis), CFD calculations, programming as well as advanced measurement and research techniques which has all proven extremely valuable in the practice. First author and co-author of several engineering and scientific research papers.

Arch018 was founded in 2011. Since then we have specialized in describing unbuilt architecture, spaces and concepts for design competitions through images and animation.

Arch018 was founded in 2011. Since then we have specialized in describing unbuilt architecture, spaces and concepts for design competitions through images and animation.

I am an expert in developing 2D drawings and 3D visualizer. Excellent communication skills to keep in touch with clients, making sure that the project designs match their needs. I'm a serious person,... Read more

I am an expert in developing 2D drawings and 3D visualizer. Excellent communication skills to keep in touch with clients, making sure that the project designs match their needs. I'm a serious person, I like to do things well, I respect my deadline and I like to have a good collaboration and a satisfied client.

I help architects, engineers, and design teams turn incomplete drawings, CAD files, survey data, and existing-building information into coordinated Revit models and clear project documentation. My bac... Read more

I help architects, engineers, and design teams turn incomplete drawings, CAD files, survey data, and existing-building information into coordinated Revit models and clear project documentation. My background combines building engineering, civil engineering, BIM workflows, and practical structural analysis. My services include architectural and structural Revit modeling, CAD-to-BIM conversion, terrain reconstruction from survey points and CAD elevations, parametric family setup, view templates, drawing coordination, AutoCAD drafting, and visualization in Enscape and Twinmotion. I can also support structural modeling and verification of reinforced-concrete and masonry elements using EdiLus, with additional experience in SAP2000, ETABS, and ATENA 2D. My recent work covers residential and heritage buildings in Italy, including existing structures where drawings, materials, or site information are incomplete. I focus on traceable assumptions, consistent model organization, and coordinated documentation that remains usable as the design changes. Typical deliverables include Revit building models, architectural and structural drawings, terrain models, AutoCAD plans, 3D views, renders, and walkthroughs. If you have sketches, legacy CAD files, survey data, or an existing building that needs to be reconstructed digitally, send me the available material and I will help define a practical scope and deliverable set.

I am a Master's graduate in architecture from Turin (Italy), working at the intersection of architectural design, urban analysis, editorial and typographic design. Architecture has always been the ar... Read more

I am a Master's graduate in architecture from Turin (Italy), working at the intersection of architectural design, urban analysis, editorial and typographic design. Architecture has always been the art form that has fascinated and engaged me the most. Ever since I was a child, I was equally captivated by both major architectural works and more ephemeral ones. During my academic studies, I expanded and refined my knowledge, allowing my curiosity to lead me toward more specific themes, such as the architectural reuse practiced by Lacaton & Vassal or the territorial strategies of Paola Viganò. I have worked on numerous group projects, but I consider it essential to carve out moments to work individually, to gather ideas, develop them, and experiment. This approach, built through various professional collaborations since 2017, has helped me conceive more complex, interdisciplinary projects, and to embark on my own path: alongside architectural work, I have spent the past year developing an independent collection of steel objects and lamps inspired by nature, exploring material, form and fabrication outside the scale of buildings. My inspirations come from reading, music and cinema. Continuous study of published projects and architectural journals is fundamental to staying engaged with contemporary architecture. My aspiration is to turn this passion into mutually beneficial collaborations, while continuously expanding my knowledge and skills. Working approach — services Architectural design Conceptual to executive proposals for buildings and landscapes. Technical drawings Precise, usable technical documentation. Research & editorial projects Research-based work on territory, landscape and transformation processes. Visualization Visual material to represent architectural ideas.

-Bechelor degree in mechanical engineering -5 years experience in industrial machine automation -specialized in thermodynamics analysis and high speed production process -3D cad modeling with Autodes... Read more

-Bechelor degree in mechanical engineering -5 years experience in industrial machine automation -specialized in thermodynamics analysis and high speed production process -3D cad modeling with Autodesk Inventor

http://www.linkedin.com/pub/carlo-filippo-ratti/81/56/a26 As you can see from my Linkedin profile, I spent part of my life designing for big companies, I've managed all the project aspects, from th... Read more

http://www.linkedin.com/pub/carlo-filippo-ratti/81/56/a26 As you can see from my Linkedin profile, I spent part of my life designing for big companies, I've managed all the project aspects, from the sketching to the industrialisation. I'm particularly expert in mechanism design with many international patents as inventor. Now, I'm the owner of a design studio named EXE3D, our services aim to be efficient, cost effective and professional. If you are interested for a quotation please contact me, I will respond as soon as possible.