Senior Design Engineer in MNC Advanced skills in product design. Proficient in surfacing, Solid, and plastics.

Senior Design Engineer in MNC Advanced skills in product design. Proficient in surfacing, Solid, and plastics.

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

Hello, I am a Design engineer having 10+ years of experience in Designing and development of components using Autocad, CATIA V5, Solidworks,etc. I do have a great experience in 2D drafting and 3D mo... Read more

Hello, I am a Design engineer having 10+ years of experience in Designing and development of components using Autocad, CATIA V5, Solidworks,etc. I do have a great experience in 2D drafting and 3D modelling of mechanical components, Fixtures design and Special purpose machine design. I have good typing skills on Word, Excel, Powerpoint and Notepad. I have good working skills on Photoshop and Illustrator. Thanks, Srinivasan

myself.Ranjith.j from chennai im a student and a innovative designer with the background of bachelors in mechanical engineering

myself.Ranjith.j from chennai im a student and a innovative designer with the background of bachelors in mechanical engineering

I'm passionate in solving customers' problems and adding value through the skills I've gained. I believe sustainable design is a sensible design for any solution. I'm a Master in Engineering (Mechan... Read more

I'm passionate in solving customers' problems and adding value through the skills I've gained. I believe sustainable design is a sensible design for any solution. I'm a Master in Engineering (Mechanical) and has more than 5 years of experience in 3D modelling and 4 years of CAD development in Solidworks

Hi I am gokulnath professional designer and an engineer.I had an experience in 3D modeling ,engineering drawings

Hi I am gokulnath professional designer and an engineer.I had an experience in 3D modeling ,engineering drawings

I’m Professional Product Designer, CAD Designer and Vessel Designer with 15 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 15 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

TG Architects is a Chennai based firm established in March, 2013 with Ar. Thinaguru, heading the Architectural department. Ar. Thinaguru is a graduate in Architecture and holds a Master's Degree in Co... Read more

TG Architects is a Chennai based firm established in March, 2013 with Ar. Thinaguru, heading the Architectural department. Ar. Thinaguru is a graduate in Architecture and holds a Master's Degree in Construction Management affiliated by UK. The dynamic team is integrated with the minds of Architects, Engineers, Accountant and Marketing professionals. The practice has finished a number of projects from Architectural and Interior Design to Landscape Design. The team has specialized Architects, with international exposure in the field, involved in the design process. Design solutions offered are backed by research and analysis of various components that are integral part of the design. The prime objective of our company being, extending support to clients from initial planning to final implementation of the project, we assist you build your dream like it's ours.

I am manoj kumar das from Odisha ,india. i have complete B-Tech in mechanical engineering from Univercity of mumbai & Complete Master programming in CAD/CAM from Central institue of plastic engineerin... Read more

I am manoj kumar das from Odisha ,india. i have complete B-Tech in mechanical engineering from Univercity of mumbai & Complete Master programming in CAD/CAM from Central institue of plastic engineering & technology (CIPET). i have 6 years of vast exprience of Design & Devlopment of Verious OEM & tear one Automotive supplier like,RENAULT,HUNDAI,KIA,PININFERINA.my best skill is CATIA V5,UG NX,powerpoing,knwoladge about PLM Drawing reading skill,GD&T,Product design,Product Devlopment,Parametric modeling,Drafting etc

mainly drafting on modular construction projects as a structural draftsman. worked on High rise residential, Industrial, Commercial projects. Being detail oriented is my strength.

mainly drafting on modular construction projects as a structural draftsman. worked on High rise residential, Industrial, Commercial projects. Being detail oriented is my strength.

Design engineer with 3 years of strong experience in product engineering. Proven ability to work on multiple projects. Possess extensive practical experience utilizing 2D and 3D CAD modelling applicat... Read more

Design engineer with 3 years of strong experience in product engineering. Proven ability to work on multiple projects. Possess extensive practical experience utilizing 2D and 3D CAD modelling applications to visualize design specifications. Facilitate project success with cost-effective design solutions.

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have... Read more

Student who actively participates in all walks of mechanical engineering and specialises in the sectors of Design and Analysis. 3D printing of materials is also one of the my area of interest and have on-hands experience with this field of science.

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photosh... Read more

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photoshop PROJECTS Projects Handled in Hindustan Aeronautics Limited: “Design and Process Optimization of Tail Rotor Drive Shaft Assembly of Advance Light Helicopter (ALH) Transmission System”. Design and development of an American Chopper using SolidWorks, Skill Lync  Developed a professional mood board, ideation sketches and detailed presentation sketches of a American Chopper in Adobe Photoshop  Designed and assembled 13 sub-components such as Chain, Engine sub-assembly, Front & rear wheels, Chassis, Suspension fork, Gas tank, etc. in SolidWorks Pro  Rendered the fully assembled American Chopper withadded Environment, added decals, scenes and materials using PhotoView 360 & SolidWorks Visualize. Design of Sun seeker Predator Yacht, Skill Lync.  Setup the blueprint according to the predefined dimension.  Designed and assembled the yatch of various portions – Hull, Front seat, Garage door, Middle seat, Superstructure, Propeller, Radar mast in SolidWorks Pro  Used Photo View 360 & SolidWorks Visualize, rendered theyatch by apply colour, Materials, and entire value like gamma value & reflection, added camera spot light to view part realistic. Design of Inner and Outer panel of Hood using NX CAD, Skill Lync.  Designed the Hood inner panel as per EURONCAP regulation and considered pedestrian safety and passenger safety standards when frontal crash occur.  Provided Emboss to improve stiffnessand allow to force dissipated toward the side outward for the driver and frontal passenger safety.  Developed the necessary reinforcement and provided latch and striker, mastic data to avoid noise. Design of Backdoor, Skill Lync.  Designed the backdoor by two portion of inner and outer panel using NX CAD and Catia V5.  Designed the back door inner panel with outward stress flow by creating emboss and provided hemming to join inner and outer panel.  Developed the necessary reinforcement for gas stay, hinges, wiper motor and provided latch and striker. Design of Car Front Fender with wheel arc calculation, Skill Lync.  Designed front fender based on the design data with following portion such as drip area, Bumper mount area, Sill area, cowl and A-pillar region using NX CAD.  Ensured the drip area designed as per standard dimensions which is fitted inside the Engine compartment acts as major mounting region of fender.  Calculated the wheel arc clearance after design and ensured the design result matches the standard regulation criteria. Design of Car Roof using NX CAD, Skill Lync.  Calculated the bow roof position by studying the roof curvature dimension for heat distortion criteria and snowed criteria.  Ensured the heat distortion test and snowed test result passes as per standard.  Designed the front roof rail, rear roof rail, centre roof rail & centre bow roof rail, and with necessary reinforcement. Design of Casing and Box assembly, Skill Lync.  Designed the Enclosure, Metal Bracket, flattening and forming the sheet using NX CAD.  Used different method to design flange, bead, cut out and convert wizard from solid to sheet metal.  Used unbend and rebend to check whether the sheet metal generated properly. Value Engineering in Air tank and Distributed Drying Unit mounting System, Ashok Leyland Ltd, Chennai (2013)  Developed and modified of air tank and Dryer and Distribution Unit mounting system in Heavy Duty vehicles to full fill the pneumatic pressure properly.  After the modification, pressure reduction in Air tank and Dryer and Distribution Unit were reduced. Also the mounting stress can be analysed using Ansys and Solid works in the mounting bracket of Air tank and DDU System.

I complete B.E in stream of mechanical engineering and i learned designing softwares like AUTOCAD,CREO,SOLIDWORKS AND INVENTOR.In autocad i know to make 2d,3d and isometric diagram and drafting.In inv... Read more

I complete B.E in stream of mechanical engineering and i learned designing softwares like AUTOCAD,CREO,SOLIDWORKS AND INVENTOR.In autocad i know to make 2d,3d and isometric diagram and drafting.In inventor i know to make 2d,3d,assembly,drafting and rendering and also stress analysis.In solidworks and creo i know to make 2d,3d,assembly and drafting.from here i practised mostly on mechanical parts diagrams like cranks shaft,tyres,fly wheel,golf ball.e.t.c.,So am interested in design and i love design and am interested in making an challenging diagrams.Surely i will complete the given projects as soon as possible.

I am a skilled Tool Designer specializing in Jigs, Fixtures, and 2D & 3D CAD Modeling with expertise in AutoCAD, SolidWorks, Fusion 360, and Creo. With a Bachelor’s degree in Automobile Engineering, I... Read more

I am a skilled Tool Designer specializing in Jigs, Fixtures, and 2D & 3D CAD Modeling with expertise in AutoCAD, SolidWorks, Fusion 360, and Creo. With a Bachelor’s degree in Automobile Engineering, I have experience in concept development, technical drafting, and Standard Work Instructions (SWI). I have worked on precision tooling solutions for automotive, aerospace, and manufacturing industries, ensuring high-quality and production-ready designs. Whether it's converting 2D drawings to 3D models, creating complex assemblies, or optimizing designs for manufacturing, I deliver efficient and accurate solutions. Let’s collaborate on your next project!

Hello, I'm an Architect by profession and have experience in this field for 5 years. I Specialize in landscape architecture and have a keen interest in 3d modeling and rendering.

Hello, I'm an Architect by profession and have experience in this field for 5 years. I Specialize in landscape architecture and have a keen interest in 3d modeling and rendering.

Hi, Greetings of the day! I'm a Mechanical Design Engineer having over 10 years of experience in product design and development by using SOLIDWORKS/AUTOCAD/CREO across multiple engineering sectors.... Read more

Hi, Greetings of the day! I'm a Mechanical Design Engineer having over 10 years of experience in product design and development by using SOLIDWORKS/AUTOCAD/CREO across multiple engineering sectors. Here are the services I provide: *2D Technical Drafter - Technical Drawing (Autocad/Solidworks) *CAD Modeler (Solid works) *3D Animation (Solid works) *3D Rendering(Solid works) *FEA (Solid works) *Customization (Solid works) *MS Office (Excel, Word, PPT) My expertise includes 3D modeling, 2D to 3D conversion, 3D Rendering, 3D Animations and 2D drawing conversion. I am highly proficient in CAD tools, particularly SOLIDWORKS/AUTOCAD/CREO. I have worked with various global industries. "I have strong experience in delivering high-quality work within deadlines". "My work policy is simple: No compromise on Quality." Feel free to reach out to me. I’d be happy to discuss your project and help enhance it to meet your needs. Place your order Now!

My first price award winning cad master Competition in government engineering college. My BE Final year project is automated guided vehicle. this robot. i Arduino board, Arduino programming, sheet m... Read more

My first price award winning cad master Competition in government engineering college. My BE Final year project is automated guided vehicle. this robot. i Arduino board, Arduino programming, sheet metal design, Cad design using creo and many more sensors are used like IR sensor etc. My education - B.E - Mechanical Engineering in First Class at 2018 my Family is very poor. but my design idea and innovation is rich.

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. *... Read more

* Knowledge with mechanical 3D software cre-o (parametric2.0). * Knowledge with mechanical 2D software AUTOCADD(2010). * Knowledge with creative design(mechanical) for special purpose machine. * 3D mechanical designing and detailing.

AutoCAD –Certified Creo/PRO-E Wildfire - Certified MS Office • Sound Knowledge in GD&T. • Ability to read and understand Production drawings. • Strong ability to write detailed engineering specific... Read more

AutoCAD –Certified Creo/PRO-E Wildfire - Certified MS Office • Sound Knowledge in GD&T. • Ability to read and understand Production drawings. • Strong ability to write detailed engineering specifications. • Excellent communication skills and profound ability and desire to work in a team environment. • Perform root-cause analysis, design guidelines, best practices, past program lessons learned, competitive product benchmarking information. • Create drawings and apply GD&T, Critical and Significant Characteristics. • Generate BOM's, maintain open issues lists, and typical engineering documents • Worked with other professionals, within and outside the engineering specialist.

Creating mechanical manufacturing drawings, 3D-Modeling and conceptual design. Well aware of drawing standards ISO and ANSI. Having experience in larger weldment drafting, Assembly detailing and shee... Read more

Creating mechanical manufacturing drawings, 3D-Modeling and conceptual design. Well aware of drawing standards ISO and ANSI. Having experience in larger weldment drafting, Assembly detailing and sheet metal drafting. Having Experience in Oil and gas extraction Equipment, Automotive parts manufacturing and medical devices.

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in... Read more

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in New product Design & development and I developed the some new type of products. also I am doing Research & development on same I design product Related to automobiles, domestics, electronics etc. , also I am Well in Reverse engineering of product I can Reproduce and Re-design of any product & Design CADD model with help of STL(point cloud),I have good knowledge of working on Sheet metal& plastics products with manufacturing standards, have well experience and good knowledge of manufacturing process of product while designing of product with the account of DFM, DFA, DFSS,DFX, along with analysis, have a good knowledge of tooling & fixtures for for product& welding knowledge for fabrication and sheet metal parts and manufacturing knowledge of plastics products, I well in Quality standards like GD&T and Tolerance and stock up analysis, APQP, good in material selections & cost and Weight reduction , bench marking of product, what I designed product make our company profit trending in market, I am working in automobiles(BIW) ,exhaust System of engine , mufflers, and I awarded as Best Designer in my Company &college .I designed one Eco friendly product Reduce pollution in environment because these I recognize and awarded for that, I have patents on Digital silencer, i worked in Vehicle Design, Vehicle Body Design (Interior& exterior) CAR, commercial & passenger vehicle Design. I proficient in CADD software like, CATIA, SOLID WORKS, UNIGRAPHICS NX-12, AUTO CADD, for Reverse engineering DESIGN-X, Geomagic Qualify& Studio , I provide a freelancer services to other in Design & CADD and Tie up with 10+ organization,

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert an... Read more

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert and if you need services like mentioned above, I'll be right choice for you. I can design different mechanical parts, fixtures and instruments in Autocad. Services: I am offering • 2d drawings • CAD 3d modeling. • isometric 2d CAD drawings • 3d product designing. • mechanical parts designs. • high realistic rendering. I will provide dwg, dxf, jpg, png, pdf file formats. Why choose me: • 100% money back guarantee. • I will provide fast delivery service.

Hi, I have graduated at Hindustan institute of technology and science.B.Tech degree Mechanical Engineering Course.I have a knowledge in CAD modelling and Mechanical Engineering.

Hi, I have graduated at Hindustan institute of technology and science.B.Tech degree Mechanical Engineering Course.I have a knowledge in CAD modelling and Mechanical Engineering.