Hire freelance CAD Conversion Services designers near Chennai, TN

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawin... Read more

Prepare plant 3D Model using AutoCAD Plant 3D Developing and reviewing Piping and Instrumentation drawing (PID), General arrangement drawing (GAD), Equipment layout, Plot planning, Isometric drawing, Structural drawing, detailed fabrication drawing of skid assemblies based on technical and client requirements. Preparing BOM and coordinating for the selection of suitable materials for various components to meet design reliability and quality goals. Making detail drawings for pipe lines, plate cutting plan, detail fabrication drawings & schemes for structural steel, field change proposals. Designing and developing piping lay-out and planning studies up to detailed engineering and production of general arrangement & piping fabrication drawings as deliverables. Making general arrangements for piping and equipment sections and details. Routing of process & utility lines as per P&ID, equipment, foundation & structural layout. Developing the conceptual design & piping item as per codes and standards of piping entailing drawings & specification study, vendor selection & finalization, schedule for development, tool modification and final approval. Assisted in preparation of drafting operating procedures for ensuring quality assurance in the preparation and execution of drafting documents. AutoCAD Plant 3D software Admin.- Preparation and Updating of Library and settings as each required detail’s such as BOM (with relevant data’s), weld no. list, Spool no. list, Pipe cut piece length list and Weight table are available in the output drawings. Actively participated in preparing valves and instruments in 3D as real shape and upload to library & AutoCAD Plant 3D – Spec Editor. Preparation and checking of API 650 Storage tanks, structure & civil foundation drawing. AutoCAD Plant 3D independently with minimal guidance/supervision. Can train and check the work of less experienced drafting and design personnel and improve the overall performance of company. Participate in progress / Design review and Technical meeting with clients & Consultants.

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

* I am skilled and 12+ years experienced in the "Blender". * I was completed "Diploma in Multimedia and Webmaster" in 2002

Hello, I am a Design engineer having 10+ years of experience in Designing and development of components using Autocad, CATIA V5, Solidworks,etc. I do have a great experience in 2D drafting and 3D mo... Read more

Hello, I am a Design engineer having 10+ years of experience in Designing and development of components using Autocad, CATIA V5, Solidworks,etc. I do have a great experience in 2D drafting and 3D modelling of mechanical components, Fixtures design and Special purpose machine design. I have good typing skills on Word, Excel, Powerpoint and Notepad. I have good working skills on Photoshop and Illustrator. Thanks, Srinivasan

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design... Read more

I’m Professional Product Designer, CAD Designer and Vessel Designer with 18 years’ hands-on experience in Automotive, Textile and Energy field. Specialized in Injection Mold Design, Die casting Design, Pressure Vessel Design, Valve Design, Reverse Engineering, GD & T and Mechanical Software Tutoring using AutoCAD, Autodesk Inventor, Solid works and Creo Tools. SERVICE I PROVIDE HERE:  MOLD DESIGN: - Preparing DFM ( Design for Manufacturing) - Creating Conceptual Sketch - Creating Product Modeling or 3d Modeling - Preparing Core and cavity Splitting - Preparing Mold design or Tool Design - Creating Technical Drawings which is related to 3d models /Assembly. - Creating STL, IGES and STEP files for 3d Printing. - Creating Electrode Model for Electric Discharge Machining(EDM). - Creating DXF files for CNC/ Laser cutting Machine, Wire Cutting machine. - Preparing CNC Program for Turning and Milling Machine. - 2d CAD drafting in AutoCAD. - BOM list - Creating Model based definition Model (MBD) for Industry 4.0 - Geometric and Tolerance Support and Tutoring  PRESSURE VESSEL DESIGN: - General Arrangement Drawing for Horizontal vessel or Vertical Column - 3d cad Modeling for Pressure Vessel. - Fabrication drawing for Pressure Vessel. - Plate cutting detail - Process Equipment Based Internal Modeling and Detailing - Piping Modeling and Detailing - BOM list for Manufacturing - Valve Design  DATA ENTRY: - Conversion from PDF to Word - Audio transcription - Business or Meeting PPT Preparation  SKILLS: AutoCAD 2018, Creo-4, Solidworks-2019, Autodesk Inventor-2020, Solid edge, Delcam, Mastercam, Microsoft Word, Excel, Presentation

Driven 3D modeller with 4.5 years of experience; excellent aesthetic sensibility and creative conceptualization. Comprehensive knowledge of CAS and CAD, and aptitude for learning things quickly. I ear... Read more

Driven 3D modeller with 4.5 years of experience; excellent aesthetic sensibility and creative conceptualization. Comprehensive knowledge of CAS and CAD, and aptitude for learning things quickly. I earned my Master's degree in transportation design from IAAD in Italy, and I currently work as a Junior digital modeler, creating models in Autodesk Alias that are on time and of the highest calibre. Teamwork makes the dream work.

A versatile person with Problem solving and Analytical skills , I’m strong in both Team work as well as single person work. My strength is my ability to improve and adoptability .

A versatile person with Problem solving and Analytical skills , I’m strong in both Team work as well as single person work. My strength is my ability to improve and adoptability .

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in... Read more

I am Manjunath from Bangalore Completed B.E Mechanical I have been working as a Design engineer from past 4 years, product design is passion so I made my passion as a profession I am proficient in New product Design & development and I developed the some new type of products. also I am doing Research & development on same I design product Related to automobiles, domestics, electronics etc. , also I am Well in Reverse engineering of product I can Reproduce and Re-design of any product & Design CADD model with help of STL(point cloud),I have good knowledge of working on Sheet metal& plastics products with manufacturing standards, have well experience and good knowledge of manufacturing process of product while designing of product with the account of DFM, DFA, DFSS,DFX, along with analysis, have a good knowledge of tooling & fixtures for for product& welding knowledge for fabrication and sheet metal parts and manufacturing knowledge of plastics products, I well in Quality standards like GD&T and Tolerance and stock up analysis, APQP, good in material selections & cost and Weight reduction , bench marking of product, what I designed product make our company profit trending in market, I am working in automobiles(BIW) ,exhaust System of engine , mufflers, and I awarded as Best Designer in my Company &college .I designed one Eco friendly product Reduce pollution in environment because these I recognize and awarded for that, I have patents on Digital silencer, i worked in Vehicle Design, Vehicle Body Design (Interior& exterior) CAR, commercial & passenger vehicle Design. I proficient in CADD software like, CATIA, SOLID WORKS, UNIGRAPHICS NX-12, AUTO CADD, for Reverse engineering DESIGN-X, Geomagic Qualify& Studio , I provide a freelancer services to other in Design & CADD and Tie up with 10+ organization,

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert an... Read more

I am an Engineer by profession and have expertise in 2D drawings or 3D CAD modelling, designing and rendering for mechanical parts, any plant layout or other product designs. I am an Autocad expert and if you need services like mentioned above, I'll be right choice for you. I can design different mechanical parts, fixtures and instruments in Autocad. Services: I am offering • 2d drawings • CAD 3d modeling. • isometric 2d CAD drawings • 3d product designing. • mechanical parts designs. • high realistic rendering. I will provide dwg, dxf, jpg, png, pdf file formats. Why choose me: • 100% money back guarantee. • I will provide fast delivery service.

Strong in all types of drafting and designing Done few projects which is designed and fabricated by myself and got patent for that

Strong in all types of drafting and designing Done few projects which is designed and fabricated by myself and got patent for that

About: JAS Inventives Engineering Systems Private limited is a registered startup company committed to provide design services to companies looking for design solutions, cost saving and sustaining eng... Read more

About: JAS Inventives Engineering Systems Private limited is a registered startup company committed to provide design services to companies looking for design solutions, cost saving and sustaining engineering We provide the following CAD and Design services CAD services: --------------- CAD Conversion work (2D to 3D, 3D to 2D, 2D to 2D, 3D to 3D) Legacy Drawing Conversion (Raster to CAD, Paper to CAD, Hand sketches to CAD) Fix CAD model errors, Optimize CAD models CAD Tool standardization / migration (Re-featuring) Convert concept R&D model to design model Convert industrial skeleton (skins surface) to design model Mechanical Drafting / Detailing Tolerance stack-up analysis Apply GD&T Pre-defined part library creation (customization) Prepare Bill of Materials Fixture design (Assembly, Inspection, holding, testing fixtures etc.) Standardization of drawing Apply DFx (Design for manufacturing, assembly Reverse Engineering (scan and convert) Tear down design (Bench mark study / competitor product analysis) Sustaining Engineering service: -------------------------------- ECO / ECN Redline corrections and design update Field failure analysis and reporting Engineering design changes (Mechanical) Design optimization (combine parts, remove non-critical features / parts, Assembly steps) Create / revise technical documentations Plastic part design services: ----------------------------- Plastic part design (fit, form, function consideration) Core and cavity extraction Convert part to moldable (apply parting surface, Gating consideration, Side / split cores) Part conversion (metal to Plastic) Injection molding design Other services: ------------------ Presentation making (Sales/ marketing brochures, training material creation, Proposition creation, case studies etc.) Technical documentation Data migration Training --------- Solidworks Online Training (Part, Assembly, Detailing. Plastic molds) – Original license holder from Dassault systems Experience: ------------- Talented Engineering professional with overall 20+ years of experience in various industry domains where effectively managed engineering projects in medium and large organizations. Predominantly worked in medical device domain for past 10+ years Product experience: Medical device, consumer products, home appliances and Industrial products Product design & Development

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photosh... Read more

SKILL SETS Computer -aided design - Autodesk AutoCAD, Dassault systems’Catia v5, Solid works 2018, Siemens NX 12 Computational Analytics - ANSYS Workbench Computing - MS Office suite and Adobe Photoshop PROJECTS Projects Handled in Hindustan Aeronautics Limited: “Design and Process Optimization of Tail Rotor Drive Shaft Assembly of Advance Light Helicopter (ALH) Transmission System”. Design and development of an American Chopper using SolidWorks, Skill Lync  Developed a professional mood board, ideation sketches and detailed presentation sketches of a American Chopper in Adobe Photoshop  Designed and assembled 13 sub-components such as Chain, Engine sub-assembly, Front & rear wheels, Chassis, Suspension fork, Gas tank, etc. in SolidWorks Pro  Rendered the fully assembled American Chopper withadded Environment, added decals, scenes and materials using PhotoView 360 & SolidWorks Visualize. Design of Sun seeker Predator Yacht, Skill Lync.  Setup the blueprint according to the predefined dimension.  Designed and assembled the yatch of various portions – Hull, Front seat, Garage door, Middle seat, Superstructure, Propeller, Radar mast in SolidWorks Pro  Used Photo View 360 & SolidWorks Visualize, rendered theyatch by apply colour, Materials, and entire value like gamma value & reflection, added camera spot light to view part realistic. Design of Inner and Outer panel of Hood using NX CAD, Skill Lync.  Designed the Hood inner panel as per EURONCAP regulation and considered pedestrian safety and passenger safety standards when frontal crash occur.  Provided Emboss to improve stiffnessand allow to force dissipated toward the side outward for the driver and frontal passenger safety.  Developed the necessary reinforcement and provided latch and striker, mastic data to avoid noise. Design of Backdoor, Skill Lync.  Designed the backdoor by two portion of inner and outer panel using NX CAD and Catia V5.  Designed the back door inner panel with outward stress flow by creating emboss and provided hemming to join inner and outer panel.  Developed the necessary reinforcement for gas stay, hinges, wiper motor and provided latch and striker. Design of Car Front Fender with wheel arc calculation, Skill Lync.  Designed front fender based on the design data with following portion such as drip area, Bumper mount area, Sill area, cowl and A-pillar region using NX CAD.  Ensured the drip area designed as per standard dimensions which is fitted inside the Engine compartment acts as major mounting region of fender.  Calculated the wheel arc clearance after design and ensured the design result matches the standard regulation criteria. Design of Car Roof using NX CAD, Skill Lync.  Calculated the bow roof position by studying the roof curvature dimension for heat distortion criteria and snowed criteria.  Ensured the heat distortion test and snowed test result passes as per standard.  Designed the front roof rail, rear roof rail, centre roof rail & centre bow roof rail, and with necessary reinforcement. Design of Casing and Box assembly, Skill Lync.  Designed the Enclosure, Metal Bracket, flattening and forming the sheet using NX CAD.  Used different method to design flange, bead, cut out and convert wizard from solid to sheet metal.  Used unbend and rebend to check whether the sheet metal generated properly. Value Engineering in Air tank and Distributed Drying Unit mounting System, Ashok Leyland Ltd, Chennai (2013)  Developed and modified of air tank and Dryer and Distribution Unit mounting system in Heavy Duty vehicles to full fill the pneumatic pressure properly.  After the modification, pressure reduction in Air tank and Dryer and Distribution Unit were reduced. Also the mounting stress can be analysed using Ansys and Solid works in the mounting bracket of Air tank and DDU System.

Hands on experience in wide range of Reverse Engineering,BIM Modelling, 3D Scanning, Scan Process, Point Cloud process Reverse Engineering: Creation of CAD from 3D scanned references of whole car inc... Read more

Hands on experience in wide range of Reverse Engineering,BIM Modelling, 3D Scanning, Scan Process, Point Cloud process Reverse Engineering: Creation of CAD from 3D scanned references of whole car including (Casting, BIW, Interior Trims, Breaking System, Cooling System, Door Trims, Seats, Battery...., BIM Modelling: Hands on experience in Point cloud to BIM modelling of various commercial & Residential buildings and Industries.

Hii, I am Deepan from Chennai. I work in PETROSERVE INTERNATIONAL for the past 8months as a Mechanical Draughtsman. My work is to make detail drawing for Skids that are used in oil & gas industry, And... Read more

Hii, I am Deepan from Chennai. I work in PETROSERVE INTERNATIONAL for the past 8months as a Mechanical Draughtsman. My work is to make detail drawing for Skids that are used in oil & gas industry, And also i have worked on 3Dmodels also.

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools lik... Read more

I have 15 years of experience in piping design. I have worked various Brownfield and Greenfield Projects in MNC companies like Petrofac, Fluor, Wood, etc. I have to experience in 3d modeling tools like E3d, Sp3d, Pdms and Pds. Roles and Responsibilities:- Piping layout designing 3d Modeling of Equipment, Piping, etc., Preparation of Plotplan,Keyplan,Equipmentlayout,Piping GA’s Vendor drawings checking Interacts with other disciplines Inter-Discipline Documents Checking & Clearing Isometric checking Nozzle orientation Support callout based on stress output Attending Model review & comments providing to other disciplines MTO Activities Input preparations for civil works Tie-in/As built works in both Brownfield and Greenfield IFC iso issuing Preparation of Combined UG Plan drawings UG piping/Isometrics Preparation of piping GA drawings Manages and maintains the Project Documentation Model close out activities

13 year's of architectural experience using Revit and Autocad. Having experience in the following categories 1. Commercial 2. Residential 3. Industrial 4. Metro stations 5. Metro depot 6. Airport... Read more

13 year's of architectural experience using Revit and Autocad. Having experience in the following categories 1. Commercial 2. Residential 3. Industrial 4. Metro stations 5. Metro depot 6. Airport 7. Campus master plan

#1. Worked as CAD Tutor, So that I well known about easy reading drawing and see easier method to finish. #2. Have Good Knowledge in Autodesk Inventor and iLogic #3.Also have CSWA certificate for Soli... Read more

#1. Worked as CAD Tutor, So that I well known about easy reading drawing and see easier method to finish. #2. Have Good Knowledge in Autodesk Inventor and iLogic #3.Also have CSWA certificate for SolidWorks Software. #4. As I completed Mechanical Engineering able to combine real time work with software. #5. Able to solve Problem easier and find root cause to solve from origin. #6. Smart Worker, Easy Learner. #7. Finished "ON TIME WITH ZERO ERROR".

We are a group of design engineers having experience from Wind energy sector, Automobile Sector and Locomotive sectors and we are together to work remotely for your design needs. We design, draft and... Read more

We are a group of design engineers having experience from Wind energy sector, Automobile Sector and Locomotive sectors and we are together to work remotely for your design needs. We design, draft and detail your requirement and support you during the manufacturing process as well. We caN prepare cost estimate for your RFQs and then list the process to manufacture the designs and also provide any support for risks in Manufacturing.

Advanced CAD Modelling : Expert in SolidWorks, Creo, AutoCAD, and Cad Query for precision design, prototyping, and CNC-ready outputs across industrial, HVAC, and furniture domains. Cross-Industry Expe... Read more

Advanced CAD Modelling : Expert in SolidWorks, Creo, AutoCAD, and Cad Query for precision design, prototyping, and CNC-ready outputs across industrial, HVAC, and furniture domains. Cross-Industry Experience: Proven success designing wind turbine components, flameproof enclosures (ATEX), HVAC layouts, and modular furniture systems—bridging field feedback with manufacturable solutions. Manufacturing-Ready Documentation: Delivering detailed quotation drawings, BOMs, and production instructions aligned with DFM/DFA and GD&T standards. Reverse Engineering & Design Optimization: Skilled in analysing legacy components and field reports to create improved, cost-effective designs with enhanced reliability. Client-Focused Collaboration: Strong communicator with experience in client coordination, proposal writing, and delivering tailored solutions that meet technical and aesthetic goals. Freelance Flexibility: Available for short-term design sprints, long-term product development, and technical branding support adapting quickly to diverse project scopes. Furniture & Industrial Design: Specialized in modular furniture CAD, ergonomic layouts, and scalable design systems for both residential and commercial applications.

I'm Engineer with expertise in fusion 360. I have been doing 3d modelling for past 2 years as a freelancer ,have completed over a dozen of projects on various project materials. Notably Rasberry pi 4... Read more

I'm Engineer with expertise in fusion 360. I have been doing 3d modelling for past 2 years as a freelancer ,have completed over a dozen of projects on various project materials. Notably Rasberry pi 4 enclosure, model of Sunglasses, Briquette machine. works I offer: -2D sketching and designing. -2D Sketch to 3D model conversion -3D printable and live scale product designing -.stl file creation and mesh corrections -.stl file modifications -CNC (NC) code generation -G code generation

AutoCAD/Aluminium Systems (doors, windows, facades) Hello, my name is Abhilash I have 17 years of both cad and Photoshop experience in latest version, I have experience in Architectural drafting, Str... Read more

AutoCAD/Aluminium Systems (doors, windows, facades) Hello, my name is Abhilash I have 17 years of both cad and Photoshop experience in latest version, I have experience in Architectural drafting, Structural drafting, Detail design, Shop drawing, fabrication and material take off for Aluminium Façade design, ACP, Curtain Wall System, Spider Glazing System, Frameless Façade System, Aluminium Louvers and Roof Cladding. I have worked for Façade companies as Designer for more than 12 years and recently started freelance drafter, I have worked on bigger projects such as Dragon mall at UAE, Trident, Radisson plaza at India, Kochi metro rail project Etc. Architecture and Façade design is my passion, I would love to contribute my skills in your Project and help you achieve your goal and ideas with minimize cost. My specialities included but not limited: -AutoCAD -Convert PDF (or hand drawn sketch) to CAD -2D Drafting -Elevation -Interior design -Photoshop -Façade design -Word/Excel

I am a Mechanical Design & Automation Engineer with 10+ years of hands-on experience in industrial machine design, product development, sheet-metal engineering, manufacturing, CAD/CAM, robotics and en... Read more

I am a Mechanical Design & Automation Engineer with 10+ years of hands-on experience in industrial machine design, product development, sheet-metal engineering, manufacturing, CAD/CAM, robotics and engineering automation. I help manufacturers, machine builders, engineering companies and product developers turn concepts, sketches and existing designs into practical, manufacturing-ready engineering solutions. My core expertise includes: • Industrial machine and mechanism design • Mechanical product development • Sheet-metal design and fabrication • 3D CAD modeling and detailed engineering drawings • Manufacturing-ready parts, assemblies, BOMs and DXF files • Jigs, fixtures, tooling and production equipment • Conveyors and material-handling systems • CNC, laser cutting, nesting and G-code workflows • Industrial automation and robotic systems • Robotic welding and laser-welding applications • CAD/CAM and engineering workflow automation • Design optimization for manufacturability, cost and assembly I have experience working across the complete engineering cycle — from concept development and 3D design through detailing, fabrication, assembly and production implementation. My approach is not simply to create a CAD model. I focus on creating designs that can actually be manufactured, assembled, maintained and used in a production environment. For manufacturing projects, I can support: Concept → 3D CAD → Design detailing → Manufacturing drawings → DXF/BOM → Fabrication → Assembly → Production improvement I am particularly interested in working with US and European manufacturers, machine builders, engineering firms, startups and product companies that need reliable mechanical engineering support for new designs, existing product improvements, automation projects or ongoing engineering work. I value clear communication, engineering accuracy, practical design decisions and professional documentation. If you have a machine, mechanism, sheet-metal product, automation requirement or manufacturing problem that needs an engineering solution, I can help develop it from concept to production-ready design.

I have experience in 25Years of CAD design & drafting services (Electrical Layouts, SLD, Civil Plan,CAD conversion,FMB,) any kind of CAD works

I have experience in 25Years of CAD design & drafting services (Electrical Layouts, SLD, Civil Plan,CAD conversion,FMB,) any kind of CAD works

Seasoned professional with 5 years of experience. Expert in AutoCAD, Civil 3D,Highway Design,Road Safety,Highway Engineering,Highways

Seasoned professional with 5 years of experience. Expert in AutoCAD, Civil 3D,Highway Design,Road Safety,Highway Engineering,Highways

Designed & Developed for OEMs. Managed all phases of design process for a multitude of products, components, assemblies and sub assemblies, including drafting, dimensioning, tolerancing, prototyping... Read more

Designed & Developed for OEMs. Managed all phases of design process for a multitude of products, components, assemblies and sub assemblies, including drafting, dimensioning, tolerancing, prototyping and documenting results

20+ years of mechanical design with profound knowledge in print reading and product development Working CAD knowledge in PTC Creo, Catia V5, AutoCad. Studied UG NX. PLM tools usage requirements. Worki... Read more

20+ years of mechanical design with profound knowledge in print reading and product development Working CAD knowledge in PTC Creo, Catia V5, AutoCad. Studied UG NX. PLM tools usage requirements. Working knowledge of engine, engine accessories like air system, after treatment system, cooling system and mounts. Working knowledge of off-highway, mining and forestry machines. Expert in using GD&T using ASME standards with respect to Design for assembly and Design for manufacturing. Fundamental understanding of FEA, mechanics.